NAME

       ce — driver for synchronous Cronyx Tau-PCI/32 WAN adapters

SYNOPSIS

       To compile this driver into the kernel, place the following line in your kernel configuration file:

             device ce

       Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

             if_ce_load="YES"

       Additional options:
       device sppp
       options NETGRAPH
       options NETGRAPH_CRONYX

DESCRIPTION

       The ce driver needs either sppp(4) or netgraph(4).  Which one to use is determined by the NETGRAPH_CRONYX
       option.  If this option is present in your kernel configuration file, the ce driver will be compiled with
       netgraph(4) support.  Otherwise, it will be compiled with sppp(4) support.

       Refer to sconfig(8) for information about the ce adapter configuration.

HARDWARE

       The ce driver supports the following models of Tau-PCI/32 WAN adapters:

       Cronyx Tau-PCI/32     two  fractional/unframed  E1  interfaces, with 32 HDLC channels shared between them
                             with total adapter throughput 2048 kbps.
       Cronyx Tau-PCI/32-Lite
                             single fractional/unframed E1 interface, with 32 HDLC channels.

SEE ALSO

       cp(4), ctau(4), cx(4), sppp(4), ifconfig(8), sconfig(8), spppcontrol(8)

HISTORY

       The ce driver was added in FreeBSD 6.2, FreeBSD 5.5  and  FreeBSD  4.11.   The  ce  driver  for  previous
       versions of FreeBSD is available from http://www.cronyx.ru/.

Debian                                          January 30, 2006                                           CE(4)