Provided by: tcllib_1.21+dfsg-1_all 
NAME
wip - Word Interpreter
SYNOPSIS
package require Tcl 8.4
package require wip ?2.2?
package require snit ?1.3?
package require struct::set
::wip wipName engine arg...
def name
def name method_prefix
wipName option ?arg arg ...?
wip::dsl ?suffix?
wipName def name ?method_prefix?
wipName defl names
wipName defd dict
wipName deflva name...
wipName defdva (name method_prefix)...
wipName undefl names
wipName undefva name...
wipName unknown cmdprefix
wipName runl wordlist
wipName run word...
wipName run_next
wipName run_next_while acceptable
wipName run_next_until rejected
wipName run_next_if acceptable
wipName run_next_ifnot rejected
wipName next
wipName peek
wipName peekall
wipName insertl at wordlist
wipName replacel wordlist
wipName pushl wordlist
wipName addl wordlist
wipName insert at word...
wipName replace word...
wipName push word...
wipName add word...
________________________________________________________________________________________________________________
DESCRIPTION
This package provides a micro interpreter for lists of words. Domain specific languages based on this
will have a bit of a Forth feel, with the input stream segmented into words and any other structuring
left to whatever the language desired. Note that we have here in essence only the core dispatch loop, and
no actual commands whatsoever, making this definitely only a Forth feel and not an actual Forth.
The idea is derived from Colin McCormack's treeql processor, modified to require less boiler plate within
the command implementations, at the expense of, likely, execution speed. In addition the interface
between processor core and commands is more complex too.
GENERAL BEHAVIOUR
Word interpreters have a mappping from the names of the language commands they shall recognize to the
methods in the engine to invoke for them, and possibly fixed arguments for these methods. This mapping is
largely static, however it is possible to change it during the execution of a word list (= program).
At the time a language command is defined the word interpreter will use snit's introspection capabilities
to determine the number of arguments expected by the method of the egnine, and together with the number
of fixed arguments supplied in the method prefix of the mapping it then knows how many arguments the
language command is expecting. This is the command's arity. Variable-argument methods (i.e. with the last
argument named args) are not allowed and will cause the word interpreter to throw an error at definition
time.
Note that while I said snit's abilities the engine object can be written in any way, as long as it
understands the method info args, which takes a method name and returns the list of arguments for that
method.
When executing a list of words (aka program) the first word is always taken as the name of a language
command, and the next words as its arguments, per the arity of the command. Command and argument words
are removed from the list and then associated method of the engine is executed with the argument words.
The process then repeats using the then-first word of the list.
Note that the methods implementing the language commands may have full access to the list of words and
are allowed to manipulate as they see fit.
[1] This means, for example, that while we cannot specify variable-argument methods directly they can
consume words after their fixed arguments before returning to the execution loop. This may be
under the control of their fixed arguments.
[2] Another possibility is the use of method run_next and its variants to execute commands coming
after the current command, changing the order of execution.
[3] Execution can be further changed by use of the program accessor methods which allow a command
implementation to modify the remaining list of words (insert, replace, prepend, append words)
without executing them immediately.
[4] At last the basic run methods save and restore an existing list of words when used, enabling
recursive use from within command implementations.
CLASS API
The main command of the package is:
::wip wipName engine arg...
The command creates a new word interpreter object with an associated global Tcl command whose name
is wipName. If however the string %AUTO% was used as object name the package will generate its own
unique name for the object.
The engine is the object the word interpreter will dispatch all recognized commands to, and the
arguments are a word list which defines an initial mapping from language words to engine methods.
The recognized language of this word list is
def name
Defines name as command of the language, to be mapped to a method of the engine having the
same name.
def name method_prefix
Defines name as command of the language, to be mapped to the method of the engine named in
the method_prefix.
The returned command may be used to invoke various operations on the object. It has the following
general form:
wipName option ?arg arg ...?
Option and the args determine the exact behavior of the command.
The package additionally exports the command:
wip::dsl ?suffix?
This command is for use within snit types which wish to use one or more wip interpreters as a
component. Use within the type definition installs most of the boilerplate needed to setup and use
a word interpreter.
It installs a component named wip, and a method wip_setup for initializing it. This method has to
be called from within the constructor of the type using the word interpreter. If further installs
a series of procedures which make the object API of the word interpreter directly available to the
type's methods, without having to specify the component.
Note that this does and cannot install the language to interpret, i.e. the mapping from words to
engine methods.
It is possible to instantiate multiple word interpreter components within a type by using
different suffices as arguments to the command. In that case the name of the component changes to
´wip_$suffix', the setup command becomes ´wip_$suffix_setup' and all the procedures also get the
suffix ´_$suffix'.
OBJECT API
The following commands are possible for word interpreter objects:
wipName def name ?method_prefix?
Defines a language command name and maps it to the method named in the engine's method_prefix. If
the method_prefix name is not specified it is simply the name of the language command.
wipName defl names
Defines a series of language commands, specified through the list of names, all of which are
mapped to engine methods of the same name.
wipName defd dict
Defines a series of language commands, specified through the dictionary dict of names and method
prefixes.
wipName deflva name...
As method defl, however the list of names is specified through multiple arguments.
wipName defdva (name method_prefix)...
As method defd, however the dictionary of names and method prefixes is specified through multiple
arguments.
wipName undefl names
Removes the named series of language commands from the mapping.
wipName undefva name...
As method undefl, however the list of names is specified through multiple arguments.
wipName unknown cmdprefix
Sets the handler for unknown words to cmdprefix. This command prefix takes one argument, the
current word, and either throws some error, or returns the result of executing the word, as
defined by the handler. The default handler simply throws an error.
wipName runl wordlist
Treats the list of words in wordlist as a program and executes the contained command one by one.
The result of the command executed last is returned as the result of this command.
The wordlist is stored in the object for access by the other run-methods, and the general program
accessor methods (see below). A previously stored wordlist is saved during the execution of this
method and restored before it returns. This enables the recursive execution of word lists within
word lists.
wipName run word...
As method runl, however the list of words to execute is specified through multiple arguments.
wipName run_next
Low-level method. Determines the next word in the list of words, and its arguments, and then
executes it. The result of the executed word is the result of this method.
Exposed for use within command implementations. The methods run and runl use it to execute words
until their word list is exhausted.
wipName run_next_while acceptable
Low-level method. Invokes the method run_next as long as the next word is in the set of acceptable
words, and the program is not empty. The result of the command executed last is returned as the
result of this command.
Exposed for use within command implementations to change the order of execution.
wipName run_next_until rejected
Low-level method. Invokes the method run_next until the next word is in the set of rejected words,
and the program is not empty. The result of the command executed last is returned as the result of
this command.
Exposed for use within command implementations to change the order of execution.
wipName run_next_if acceptable
Low-level method. Invokes the method run_next if the next word is in the set of acceptable words,
and the program is not empty. The result of the command executed last is returned as the result of
this command.
Exposed for use within command implementations to change the order of execution.
wipName run_next_ifnot rejected
Low-level method. Invokes the method run_next if the next word is not in the set of rejected
words, and the program is not empty. The result of the command executed last is returned as the
result of this command.
Exposed for use within command implementations to change the order of execution.
wipName next
Returns the next word in the programm. The word is also removed.
wipName peek
Returns the next word in the programm without removing it
wipName peekall
Returns the remaining programm in toto.
wipName insertl at wordlist
Basic programm accessor method. Inserts the specified wordlist into the program, just before the
word at position at. Positions are counted from zero.
wipName replacel wordlist
Basic programm accessor method. Replaces the whole stored program with the specified wordlist.
wipName pushl wordlist
Program accessor method. The specified wordlist is added to the front of the remaining program.
Equivalent to
$wip insertl 0 $wordlist
wipName addl wordlist
Program accessor method. The specified wordlist is appended at the end of the remaining program.
Equivalent to
$wip insertl end $wordlist
wipName insert at word...
Like method insertl, except the words are specified through multiple arguments.
wipName replace word...
Like method setl, except the words are specified through multiple arguments.
wipName push word...
Like method pushl, except the words are specified through multiple arguments.
wipName add word...
Like method addl, except the words are specified through multiple arguments.
EXAMPLES
No examples yet.
BUGS, IDEAS, FEEDBACK
This document, and the package it describes, will undoubtedly contain bugs and other problems. Please
report such in the category wip of the Tcllib Trackers [http://core.tcl.tk/tcllib/reportlist]. Please
also report any ideas for enhancements you may have for either package and/or documentation.
When proposing code changes, please provide unified diffs, i.e the output of diff -u.
Note further that attachments are strongly preferred over inlined patches. Attachments can be made by
going to the Edit form of the ticket immediately after its creation, and then using the left-most button
in the secondary navigation bar.
KEYWORDS
interpreter, list, word
CATEGORY
Programming tools
COPYRIGHT
Copyright (c) 2007-2010 Andreas Kupries <andreas_kupries@users.sourceforge.net>
tcllib 2.2 wip(3tcl)