Provided by: erlang-manpages_25.3.2.8+dfsg-1ubuntu4.4_all 
NAME
ttb - A base for building trace tools for distributed systems.
DESCRIPTION
The Trace Tool Builder, ttb, is a base for building trace tools for distributed systems.
When using ttb, do not use module dbg in application Runtime_Tools in parallel.
EXPORTS
start_trace(Nodes, Patterns, FlagSpec, Opts) -> Result
Types:
Result = see p/2
Nodes = see tracer/2
Patterns = [tuple()]
FlagSpec = {Procs, Flags}
Proc = see p/2
Flags = see p/2
Opts = see tracer/2
This function is a shortcut allowing to start a trace with one command. Each tuple in Patterns is
converted to a list, which in turn is passed to ttb:tpl/2,3,4.
The call:
> ttb:start_trace([Node, OtherNode], [{mod, foo, []}, {mod, bar, 2}], {all, call}, [{file, File}, {handler,{fun myhandler/4, S}}]).
is equivalent to:
> ttb:start_trace([Node, OtherNode], [{file, File}, {handler,{fun myhandler/4, S}}]), ttb:tpl(mod, foo, []), ttb:tpl(mod, bar, 2, []), ttb:p(all, call).
tracer() -> Result
Equivalent to tracer(node()).
tracer(Shortcut) -> Result
Types:
Shortcut = shell | dbg
Handy shortcuts for common tracing settings.
shell is equivalent to tracer(node(),[{file, {local, "ttb"}}, shell]).
dbg is equivalent to tracer(node(),[{shell, only}]).
tracer(Nodes) -> Result
Equivalent to tracer(Nodes,[]).
tracer(Nodes,Opts) -> Result
Types:
Result = {ok, ActivatedNodes} | {error,Reason}
Nodes = atom() | [atom()] | all | existing | new
Opts = Opt | [Opt]
Opt = {file,Client} | {handler, FormatHandler} | {process_info,PI} | shell | {shell, ShellSpec}
| {timer, TimerSpec} | {overload_check, {MSec, Module, Function}} | {flush, MSec} | resume |
{resume, FetchTimeout} | {queue_size, QueueSize}
TimerSpec = MSec | {MSec, StopOpts}
MSec = FetchTimeout = integer()
Module = Function = atom()
StopOpts = see stop/2
Client = File | {local, File}
File = Filename | Wrap
Filename = string()
Wrap = {wrap,Filename} | {wrap,Filename,Size,Count}
FormatHandler = See format/2
PI = true | false
ShellSpec = true | false | only
QueueSize = non_neg_integer()
Starts a file trace port on all specified nodes and points the system tracer for sequential
tracing to the same port.
Options:
Filename:
The specified Filename is prefixed with the node name. Default Filename is ttb.
File={wrap,Filename,Size,Count}:
Can be used if the size of the trace logs must be limited. Default values are Size=128*1024
and Count=8.
Client:
When tracing diskless nodes, ttb must be started from an external "trace control node" with
disk access, and Client must be {local, File}. All trace information is then sent to the trace
control node where it is written to file.
queue_size:
When tracing to shell or {local,File}, an ip trace driver is used internally. The ip trace
driver has a queue of maximum QueueSize messages waiting to be delivered. If the driver cannot
deliver messages as fast as they are produced, the queue size might be exceeded and messages
are dropped. This parameter is optional, and is only useful if many {drop,N} trace messages
are received by the trace handler. It has no meaning if shell or {local,File} is not used. See
dbg:trace_port/2 for more information about the ip trace driver.
process_info:
Indicates if process information is to be collected. If PI = true (which is default), each
process identifier Pid is replaced by a tuple {Pid,ProcessInfo,Node}, where ProcessInfo is the
registered process name, its globally registered name, or its initial function. To turn off
this functionality, set PI = false.
{shell, ShellSpec}:
Indicates that trace messages are to be printed on the console as they are received by the
tracing process. This implies trace client {local, File}. If ShellSpec is only (instead of
true), no trace logs are stored.
shell:
Shortcut for {shell, true}.
timer:
Indicates that the trace is to be automatically stopped after MSec milliseconds. StopOpts are
passed to command ttb:stop/2 if specified (default is []). Notice that the timing is
approximate, as delays related to network communication are always present. The timer starts
after ttb:p/2 is issued, so you can set up your trace patterns before.
overload_check:
Allows to enable overload checking on the nodes under trace. Module:Function(check) is
performed each MSec millisecond. If the check returns true, the tracing is disabled on a
specified node.
Module:Function must be able to handle at least three atoms: init, check, and stop. init and
stop allows you to initialize and clean up the check environment.
When a node gets overloaded, it is not possible to issue ttb:p/2 or any command from the
ttb:tp/2,3,4 family, as it would lead to inconsistent tracing state (different trace
specifications on different nodes).
flush:
Periodically flushes all file trace port clients (see dbg:flush_trace_port/1). When enabled,
the buffers are freed each MSec millisecond. This option is not allowed with {file, {local,
File}} tracing.
{resume, FetchTimeout}:
Enables the autoresume feature. When enabled, remote nodes try to reconnect to the controlling
node if they are restarted. The feature requires application Runtime_Tools to be started (so
it has to be present in the .boot scripts if the traced nodes run with embedded Erlang). If
this is not possible, resume can be performed manually by starting Runtime_Tools remotely
using rpc:call/4.
ttb tries to fetch all logs from a reconnecting node before reinitializing the trace. This
must finish within FetchTimeout milliseconds or is aborted.
By default, autostart information is stored in a file named ttb_autostart.bin on each node. If
this is not desired (for example, on diskless nodes), a custom module handling autostart
information storage and retrieval can be provided by specifying environment variable
ttb_autostart_module for the application Runtime_Tools. The module must respond to the
following API:
write_config(Data) -> ok:
Stores the provided data for further retrieval. It is important to realize that the data
storage used must not be affected by the node crash.
read_config() -> {ok, Data} | {error, Error}:
Retrieves configuration stored with write_config(Data).
delete_config() -> ok:
Deletes configuration stored with write_config(Data). Notice that after this call any
subsequent calls to read_config must return {error, Error}.
resume implies the default FetchTimeout, which is 10 seconds
p(Item,Flags) -> Return
Types:
Return = {ok,[{Item,MatchDesc}]}
Items = Item | [Item]
Item = pid() | port() | RegName | {global,GlobalRegName} | all | processes | ports | existing |
existing_processes | existing_ports | new | new_processes | new_ports
RegName = atom()
GlobalRegName = term()
Flags = Flag | [Flag]
Sets the specified trace flags on the specified processes or ports. Flag timestamp is always
turned on.
See the Reference Manual for module dbg for the possible trace flags. Parameter MatchDesc is the
same as returned from dbg:p/2.
Processes can be specified as registered names, globally registered names, or process identifiers.
Ports can be specified as registered names or port identifiers. If a registered name is specified,
the flags are set on processes/ports with this name on all active nodes.
Issuing this command starts the timer for this trace if option timer is specified with tracer/2.
tp(Module [, Function [, Arity]], MatchSpec)
tp({Module, Function , Arity}, MatchSpec)
tpl(Module [, Function [, Arity]], MatchSpec)
tpl({Module, Function , Arity}, MatchSpec)
ctp()
ctp(Module [, Function [, Arity]])
ctp({Module, Function, Arity})
ctpl()
ctpl(Module [, Function [, Arity]])
ctpl({Module, Function, Arity})
ctpg()
ctpg(Module [, Function [, Arity]])
ctpg({Module, Function, Arity})
tpe(Event,MatchSpec)
ctpe(Event)
These functions are to be used with trace flag call, send, and 'receive' for setting and clearing
trace patterns.
When trace flag call is set on a process, function calls are traced on that process if a trace
pattern is set for the called function.
The send and 'receive' flags enable tracing of all messages sent and received by the process/port.
Trace patterns set with tpe may limit traced messages based on the message content, the sender,
and/or the receiver.
Trace patterns specify how to trace a function or a message by using match specifications. Match
specifications are described in the ERTS User's Guide.
These functions are equivalent to the corresponding functions in module dbg, but all calls are
stored in the history. The history buffer makes it easy to create configuration files; the same
trace environment can be set up many times, for example, to compare two test runs. It also reduces
the amount of typing when using ttb from the Erlang shell.
tp:
Sets trace patterns on global function calls.
tpl:
Sets trace patterns on local and global function calls.
tpe:
Sets trace patterns on messages.
ctp:
Clears trace patterns on local and global function calls.
ctpl:
Clears trace patterns on local function calls.
ctpg:
Clears trace patterns on global function calls.
ctpe:
Clears trace patterns on messages.
With tp and tpl, one of the match specification shortcuts can be used (for example,
ttb:tp(foo_module, caller)).
The shortcuts are as follows:
* return - for [{'_',[],[{return_trace}]}] (report the return value from a traced function)
* caller - for [{'_',[],[{message,{caller}}]}] (report the calling function)
* {codestr, Str} - for dbg:fun2ms/1 arguments passed as strings (example: "fun(_) ->
return_trace() end")
list_history() -> History
Types:
History = [{N,Func,Args}]
All calls to ttb is stored in the history. This function returns the current content of the
history. Any entry can be reexecuted with run_history/1 or stored in a configuration file with
write_config/2,3.
run_history(N) -> ok | {error, Reason}
Types:
N = integer() | [integer()]
Executes the specified entry or entries from the history list. To list history, use
list_history/0.
write_config(ConfigFile,Config)
Equivalent to write_config(ConfigFile,Config,[]).
write_config(ConfigFile,Config,Opts) -> ok | {error,Reason}
Types:
ConfigFile = string()
Config = all | [integer()] | [{Mod,Func,Args}]
Mod = atom()
Func = atom()
Args = [term()]
Opts = Opt | [Opt]
Opt = append
Creates or extends a configuration file, which can be used for restoring a specific configuration
later.
The contents of the configuration file can either be fetched from the history or specified
directly as a list of {Mod,Func,Args}.
If the complete history is to be stored in the configuration file, Config must be all. If only a
selected number of entries from the history are to be stored, Config must be a list of integers
pointing out the entries to be stored.
If Opts is not specified or if it is [], ConfigFile is deleted and a new file is created. If Opts
= [append], ConfigFile is not deleted. The new information is appended at the end of the file.
run_config(ConfigFile) -> ok | {error,Reason}
Types:
ConfigFile = string()
Executes all entries in the specified configuration file. Notice that the history of the last
trace is always available in file ttb_last_config.
run_config(ConfigFile,NumList) -> ok | {error,Reason}
Types:
ConfigFile = string()
NumList = [integer()]
Executes selected entries from the specified configuration file. NumList is a list of integers
pointing out the entries to be executed.
To list the contents of a configuration file, use list_config/1.
Notice that the history of the last trace is always available in file ttb_last_config.
list_config(ConfigFile) -> Config | {error,Reason}
Types:
ConfigFile = string()
Config = [{N,Func,Args}]
Lists all entries in the specified configuration file.
write_trace_info(Key,Info) -> ok
Types:
Key = term()
Info = Data | fun() -> Data
Data = term()
File .ti contains {Key,ValueList} tuples. This function adds Data to the ValueList associated with
Key. All information written with this function is included in the call to the format handler.
seq_trigger_ms() -> MatchSpec
Equivalent to seq_trigger_ms(all).
seq_trigger_ms(Flags) -> MatchSpec
Types:
MatchSpec = match_spec()
Flags = all | SeqTraceFlag | [SeqTraceFlag]
SeqTraceFlag = atom()
A match specification can turn on or off sequential tracing. This function returns a match
specification, which turns on sequential tracing with the specified Flags.
This match specification can be specified as the last argument to tp or tpl. The activated Item
then becomes a trigger for sequential tracing. This means that if the item is called on a process
with trace flag call set, the process is "contaminated" with token seq_trace.
If Flags = all, all possible flags are set.
The possible values for SeqTraceFlag are available in seq_trace.
For a description of the match_spec() syntax, see section Match Specifications in Erlang in ERTS,
which explains the general match specification "language".
Note:
The system tracer for sequential tracing is automatically initiated by ttb when a trace port is
started with ttb:tracer/0,1,2.
An example of how to use function seq_trigger_ms/0,1 follows:
(tiger@durin)5> ttb:tracer().
{ok,[tiger@durin]}
(tiger@durin)6> ttb:p(all,call).
{ok,{[all],[call]}}
(tiger@durin)7> ttb:tp(mod,func,ttb:seq_trigger_ms()).
{ok,[{matched,1},{saved,1}]}
(tiger@durin)8>
Whenever mod:func(...) is called after this, token seq_trace is set on the executing process.
stop()
Equivalent to stop([]).
stop(Opts) -> stopped | {stopped, Dir}
Types:
Opts = Opt | [Opt]
Opt = nofetch | {fetch_dir, Dir} | format | {format, FormatOpts} | return_fetch_dir
Dir = string()
FormatOpts = see format/2
Stops tracing on all nodes. Logs and trace information files are sent to the trace control node
and stored in a directory named ttb_upload_FileName-Timestamp, where Filename is the one provided
with {file, File} during trace setup and Timestamp is of the form yyyymmdd-hhmmss. Even logs from
nodes on the same machine as the trace control node are moved to this directory. The history list
is saved to a file named ttb_last_config for further reference (as it is no longer accessible
through history and configuration management functions, like ttb:list_history/0).
Options:
nofetch:
Indicates that trace logs are not to be collected after tracing is stopped.
{fetch, Dir}:
Allows specification of the directory to fetch the data to. If the directory already exists,
an error is thrown.
format:
Indicates the trace logs to be formatted after tracing is stopped. All logs in the fetch
directory are merged.
return_fetch_dir:
Indicates the return value to be {stopped, Dir} and not just stopped. This implies fetch.
get_et_handler()
Returns the et handler, which can be used with format/2 or tracer/2.
Example: ttb:format(Dir, [{handler, ttb:get_et_handler()}]).
format(File)
Equivalent to format(File,[]).
format(File,Options) -> ok | {error, Reason}
Types:
File = string() | [string()]
This can be the name of a binary log, a list of such logs, or the name of a directory
containing one or more binary logs.
Options = Opt | [Opt]
Opt = {out,Out} | {handler,FormatHandler} | disable_sort
Out = standard_io | string()
FormatHandler = {Function, InitialState}
Function = fun(Fd,Trace,TraceInfo,State) -> State
Fd = standard_io | FileDescriptor
File descriptor of the destination file Out.
Trace = tuple()
The trace message. For details, see the Reference Manual for module erlang.
TraceInfo = [{Key,ValueList}]
Includes the keys flags, client, and node. If handler is specified as option to the tracer
function, this is also included. Also, all information written with function
write_trace_info/2 is included.
Reads the specified binary trace log(s). The logs are processed in the order of their time stamps
as long as option disable_sort is not specified.
If FormatHandler = {Function,InitialState}, Function is called for each trace message.
If FormatHandler = get_et_handler(), et_viewer in application ET is used for presenting the trace
log graphically. ttb provides a few different filters that can be selected from menu Filters and
scaling in the et_viewer.
If FormatHandler is not specified, a default handler is used presenting each trace message as a
text line.
The state returned from each call of Function is passed to the next call, even if the next call is
to format a message from another log file.
If Out is specified, FormatHandler gets the file descriptor to Out as the first parameter.
Out is ignored if the et format handler is used.
Wrap logs can be formatted one by one or all at once. To format one of the wrap logs in a set,
specify the exact file name. To format the whole set of wrap logs, specify the name with * instead
of the wrap count. For examples, see the User's Guide.
Ericsson AB observer 2.14 ttb(3erl)