Provided by: tcllib_1.21+dfsg-1_all 
NAME
transfer::transmitter - Data source
SYNOPSIS
package require Tcl 8.4
package require snit ?1.0?
package require transfer::copy ?0.2?
package require transfer::data::source ?0.2?
package require transfer::connect ?0.2?
package require transfer::transmitter ?0.2?
transfer::transmitter objectName ?options...?
transfer::transmitter stream channel chan host port ?arg...?
transfer::transmitter stream file path host port ?arg...?
objectName method ?arg arg ...?
objectName destroy
objectName start
objectName busy
________________________________________________________________________________________________________________
DESCRIPTION
This package pulls data sources and connection setup together into a combined object for the transmission
of information over a socket. These objects understand all the options from objects created by the
packages transfer::data::source and transfer::connect.
API
PACKAGE COMMANDS
transfer::transmitter objectName ?options...?
This command creates a new transmitter object with an associated Tcl command whose name is
objectName. This object command is explained in full detail in the sections Object command and
Object methods. The set of supported options is explained in section Options.
The object command will be created under the current namespace if the objectName is not fully
qualified, and in the specified namespace otherwise. The fully qualified name of the object
command is returned as the result of the command.
transfer::transmitter stream channel chan host port ?arg...?
This method creates a fire-and-forget transfer for the data contained in the channel chan,
starting at the current seek location. The channel is configured to use binary translation and
encoding for the transfer. The channel is automatically closed when the transfer has completed.
If both host and port are provided an active connection to the destination is made. If only a port
is specified (with host the empty string) then a passive connection is made instead.
Any arguments after the port are treated as options and are used to configure the internal
transmitter object. See the section Options for a list of the supported options and their
meaning. Note however that the signature of the command prefix specified for the -command
callback differs from the signature for the same option of the transmitter object. This callback
is only given the number of bytes and transfered, and possibly an error message. No reference to
the internally used transmitter object is made.
The result returned by the command is the empty string if it was set to make an active connection,
and the port the internal transmitter object is listening on otherwise, i.e when it is configured
to connect passively. See also the package transfer::connect and the description of the method
connect for where this behaviour comes from.
transfer::transmitter stream file path host port ?arg...?
This method is like stream channel, except that the data contained in the file path is transfered.
OBJECT COMMAND
All objects created by the ::transfer::transmitter command have the following general form:
objectName method ?arg arg ...?
The method method and its arg'uments determine the exact behavior of the command. See section
Object methods for the detailed specifications.
OBJECT METHODS
objectName destroy
This method destroys the object. Doing so while a transmission is in progress will cause errors
later on, when the transmission completes and tries to access the now missing data structures of
the destroyed object.
objectName start
This method initiates the data transmission, setting up the connection first and then copying the
information. The method will throw an error if a transmission is already/still in progress. I.e.
it is not possible to run two transmissions in parallel on a single object, only in sequence.
Multiple transmitter objects are needed to manage parallel transfers, one per transmission.
Errors will also be thrown if the configuration of the data source is invalid, or if no completion
callback was specified.
The result returned by the method is the empty string for an object configured to make an active
connection, and the port the object is listening on otherwise, i.e when it is configured to
connect passively. See also the package transfer::connect and the description of the method
connect for where this behaviour comes from.
objectName busy
This method returns a boolean value telling us whether a transmission is in progress (True), or
not (False).
OPTIONS
All transmitter objects support the union of the options supported by their connect and data source
components, plus two of their own. See also the documentation for the packages transfer::data::source
and transfer::connect.
-blocksize int
This option specifies the size of the chunks to be transmitted in one block. Usage is optional,
its default value is 1024.
-command cmdprefix
This option specifies the command to invoke when the transmission of the information has been
completed. The arguments given to this command are the same as given to the completion callback
of the command transfer::copy::do provided by the package transfer::copy.
-mode mode
This option specifies the mode the object is in. It is optional and defaults to active mode. The
two possible modes are:
active In this mode the two options -host and -port are relevant and specify the host and TCP port
the object has to connect to. The host is given by either name or IP address.
passive
In this mode the option -host has no relevance and is ignored should it be configured. The
only option the object needs is -port, and it specifies the TCP port on which the listening
socket is opened to await the connection from the partner.
-host hostname-or-ipaddr
This option specifies the host to connect to in active mode, either by name or ip-address. An
object configured for passive mode ignores this option.
-port int
For active mode this option specifies the port the object is expected to connect to. For passive
mode however it is the port where the object creates the listening socket waiting for a
connection. It defaults to 0, which allows the OS to choose the actual port to listen on.
-socketcmd command
This option allows the user to specify which command to use to open a socket. The default is to
use the builtin ::socket. Any compatible with that command is allowed.
The envisioned main use is the specfication of tls::socket. I.e. this option allows the creation
of secure transfer channels, without making this package explicitly dependent on the tls package.
See also section Secure connections.
-encoding encodingname
-eofchar eofspec
-translation transspec
These options are the same as are recognized by the builtin command fconfigure. They provide the
configuration to be set for the channel between the two partners after it has been established,
but before the callback is invoked (See method connect).
-string text
This option specifies that the source of the data is an immediate string, and its associated
argument contains the string in question.
-channel handle
This option specifies that the source of the data is a channel, and its associated argument is the
handle of the channel containing the data.
-file path
This option specifies that the source of the data is a file, and its associated argument is the
path of the file containing the data.
-variable varname
This option specifies that the source of the data is a string stored in a variable, and its
associated argument contains the name of the variable in question. The variable is assumed to be
global or namespaced, anchored at the global namespace.
-size int
This option specifies the size of the data transfer. It is optional and defaults to -1. This
value, and any other value less than zero signals to transfer all the data from the source.
-progress command
This option, if specified, defines a command to be invoked for each chunk of bytes transmitted,
allowing the user to monitor the progress of the transmission of the data. The callback is always
invoked with one additional argument, the number of bytes transmitted so far.
SECURE CONNECTIONS
One way to secure connections made by objects of this package is to require the package tls and then
configure the option -socketcmd to force the use of command tls::socket to open the socket.
# Load and initialize tls
package require tls
tls::init -cafile /path/to/ca/cert -keyfile ...
# Create a connector with secure socket setup,
transfer::transmitter T -socketcmd tls::socket ...
...
TLS SECURITY CONSIDERATIONS
This package uses the TLS package to handle the security for https urls and other socket connections.
Policy decisions like the set of protocols to support and what ciphers to use are not the responsibility
of TLS, nor of this package itself however. Such decisions are the responsibility of whichever
application is using the package, and are likely influenced by the set of servers the application will
talk to as well.
For example, in light of the recent POODLE attack
[http://googleonlinesecurity.blogspot.co.uk/2014/10/this-poodle-bites-exploiting-ssl-30.html] discovered
by Google many servers will disable support for the SSLv3 protocol. To handle this change the
applications using TLS must be patched, and not this package, nor TLS itself. Such a patch may be as
simple as generally activating tls1 support, as shown in the example below.
package require tls
tls::init -tls1 1 ;# forcibly activate support for the TLS1 protocol
... your own application code ...
BUGS, IDEAS, FEEDBACK
This document, and the package it describes, will undoubtedly contain bugs and other problems. Please
report such in the category transfer of the Tcllib Trackers [http://core.tcl.tk/tcllib/reportlist].
Please also report any ideas for enhancements you may have for either package and/or documentation.
When proposing code changes, please provide unified diffs, i.e the output of diff -u.
Note further that attachments are strongly preferred over inlined patches. Attachments can be made by
going to the Edit form of the ticket immediately after its creation, and then using the left-most button
in the secondary navigation bar.
KEYWORDS
channel, copy, data source, secure, ssl, tls, transfer, transmitter
CATEGORY
Transfer module
COPYRIGHT
Copyright (c) 2006-2009 Andreas Kupries <andreas_kupries@users.sourceforge.net>
tcllib 0.2 transfer::transmitter(3tcl)