Provided by: erlang-manpages_25.3.2.8+dfsg-1ubuntu4.4_all 
NAME
seq_trace - Sequential tracing of information transfers.
DESCRIPTION
Sequential tracing makes it possible to trace information flows between processes resulting from one
initial transfer of information. Sequential tracing is independent of the ordinary tracing in Erlang,
which is controlled by the erlang:trace/3 BIF. For more information about what sequential tracing is and
how it can be used, see section Sequential Tracing.
seq_trace provides functions that control all aspects of sequential tracing. There are functions for
activation, deactivation, inspection, and for collection of the trace output.
DATA TYPES
token() = {integer(), boolean(), term(), term(), term()}
An opaque term (a tuple) representing a trace token.
EXPORTS
set_token(Token) -> PreviousToken | ok
Types:
Token = PreviousToken = [] | token()
Sets the trace token for the calling process to Token. If Token == [] then tracing is disabled,
otherwise Token should be an Erlang term returned from get_token/0 or set_token/1. set_token/1 can
be used to temporarily exclude message passing from the trace by setting the trace token to empty
like this:
OldToken = seq_trace:set_token([]), % set to empty and save
% old value
% do something that should not be part of the trace
io:format("Exclude the signalling caused by this~n"),
seq_trace:set_token(OldToken), % activate the trace token again
...
Returns the previous value of the trace token.
set_token(Component, Val) -> OldVal
Types:
Component = component()
Val = OldVal = value()
component() = label | serial | flag()
flag() =
send | 'receive' | print | timestamp | monotonic_timestamp |
strict_monotonic_timestamp
value() =
(Label :: term()) |
{Previous :: integer() >= 0, Current :: integer() >= 0} |
(Bool :: boolean())
Sets the individual Component of the trace token to Val. Returns the previous value of the
component.
set_token(label, Label):
The label component is a term which identifies all events belonging to the same sequential
trace. If several sequential traces can be active simultaneously, label is used to identify
the separate traces. Default is 0.
Warning:
Labels were restricted to small signed integers (28 bits) prior to OTP 21. The trace token will
be silently dropped if it crosses over to a node that does not support the label.
set_token(serial, SerialValue):
SerialValue = {Previous, Current}. The serial component contains counters which enables the
traced messages to be sorted, should never be set explicitly by the user as these counters are
updated automatically. Default is {0, 0}.
set_token(send, Bool):
A trace token flag (true | false) which enables/disables tracing on information sending.
Default is false.
set_token('receive', Bool):
A trace token flag (true | false) which enables/disables tracing on information reception.
Default is false.
set_token(print, Bool):
A trace token flag (true | false) which enables/disables tracing on explicit calls to
seq_trace:print/1. Default is false.
set_token(timestamp, Bool):
A trace token flag (true | false) which enables/disables a timestamp to be generated for each
traced event. Default is false.
set_token(strict_monotonic_timestamp, Bool):
A trace token flag (true | false) which enables/disables a strict monotonic timestamp to be
generated for each traced event. Default is false. Timestamps will consist of Erlang monotonic
time and a monotonically increasing integer. The time-stamp has the same format and value as
produced by {erlang:monotonic_time(nanosecond), erlang:unique_integer([monotonic])}.
set_token(monotonic_timestamp, Bool):
A trace token flag (true | false) which enables/disables a strict monotonic timestamp to be
generated for each traced event. Default is false. Timestamps will use Erlang monotonic time.
The time-stamp has the same format and value as produced by erlang:monotonic_time(nanosecond).
If multiple timestamp flags are passed, timestamp has precedence over strict_monotonic_timestamp
which in turn has precedence over monotonic_timestamp. All timestamp flags are remembered, so if
two are passed and the one with highest precedence later is disabled the other one will become
active.
get_token() -> [] | token()
Returns the value of the trace token for the calling process. If [] is returned, it means that
tracing is not active. Any other value returned is the value of an active trace token. The value
returned can be used as input to the set_token/1 function.
get_token(Component) -> {Component, Val}
Types:
Component = component()
Val = value()
component() = label | serial | flag()
flag() =
send | 'receive' | print | timestamp | monotonic_timestamp |
strict_monotonic_timestamp
value() =
(Label :: term()) |
{Previous :: integer() >= 0, Current :: integer() >= 0} |
(Bool :: boolean())
Returns the value of the trace token component Component. See set_token/2 for possible values of
Component and Val.
print(TraceInfo) -> ok
Types:
TraceInfo = term()
Puts the Erlang term TraceInfo into the sequential trace output if the calling process currently
is executing within a sequential trace and the print flag of the trace token is set.
print(Label, TraceInfo) -> ok
Types:
Label = integer()
TraceInfo = term()
Same as print/1 with the additional condition that TraceInfo is output only if Label is equal to
the label component of the trace token.
reset_trace() -> true
Sets the trace token to empty for all processes on the local node. The process internal counters
used to create the serial of the trace token is set to 0. The trace token is set to empty for all
messages in message queues. Together this will effectively stop all ongoing sequential tracing in
the local node.
set_system_tracer(Tracer) -> OldTracer
Types:
Tracer = OldTracer = tracer()
tracer() =
(Pid :: pid()) |
port() |
(TracerModule :: {module(), term()}) |
false
Sets the system tracer. The system tracer can be either a process, port or tracer module denoted
by Tracer. Returns the previous value (which can be false if no system tracer is active).
Failure: {badarg, Info}} if Pid is not an existing local pid.
get_system_tracer() -> Tracer
Types:
Tracer = tracer()
tracer() =
(Pid :: pid()) |
port() |
(TracerModule :: {module(), term()}) |
false
Returns the pid, port identifier or tracer module of the current system tracer or false if no
system tracer is activated.
TRACE MESSAGES SENT TO THE SYSTEM TRACER
The format of the messages is one of the following, depending on if flag timestamp of the trace token is
set to true or false:
{seq_trace, Label, SeqTraceInfo, TimeStamp}
or
{seq_trace, Label, SeqTraceInfo}
Where:
Label = int()
TimeStamp = {Seconds, Milliseconds, Microseconds}
Seconds = Milliseconds = Microseconds = int()
SeqTraceInfo can have the following formats:
{send, Serial, From, To, Message}:
Used when a process From with its trace token flag send set to true has sent information. To may be a
process identifier, a registered name on a node represented as {NameAtom, NodeAtom}, or a node name
represented as an atom. From may be a process identifier or a node name represented as an atom.
Message contains the information passed along in this information transfer. If the transfer is done
via message passing, it is the actual message.
{'receive', Serial, From, To, Message}:
Used when a process To receives information with a trace token that has flag 'receive' set to true.
To may be a process identifier, or a node name represented as an atom. From may be a process
identifier or a node name represented as an atom. Message contains the information passed along in
this information transfer. If the transfer is done via message passing, it is the actual message.
{print, Serial, From, _, Info}:
Used when a process From has called seq_trace:print(Label, TraceInfo) and has a trace token with flag
print set to true, and label set to Label.
Serial is a tuple {PreviousSerial, ThisSerial}, where:
* Integer PreviousSerial denotes the serial counter passed in the last received information that
carried a trace token. If the process is the first in a new sequential trace, PreviousSerial is set
to the value of the process internal "trace clock".
* Integer ThisSerial is the serial counter that a process sets on outgoing messages. It is based on the
process internal "trace clock", which is incremented by one before it is attached to the trace token
in the message.
SEQUENTIAL TRACING
Sequential tracing is a way to trace a sequence of information transfers between different local or
remote processes, where the sequence is initiated by a single transfer. The typical information transfer
is an ordinary Erlang message passed between two processes, but information is transferred also in other
ways. In short, it works as follows:
Each process has a trace token, which can be empty or not empty. When not empty, the trace token can be
seen as the tuple {Label, Flags, Serial, From}. The trace token is passed invisibly when information is
passed between processes. In most cases the information is passed in ordinary messages between processes,
but information is also passed between processes by other means. For example, by spawning a new process.
An information transfer between two processes is represented by a send event and a receive event
regardless of how it is passed.
To start a sequential trace, the user must explicitly set the trace token in the process that will send
the first information in a sequence.
The trace token of a process is set each time the process receives information. This is typically when
the process matches a message in a receive statement, according to the trace token carried by the
received message, empty or not.
On each Erlang node, a process can be set as the system tracer. This process will receive trace messages
each time information with a trace token is sent or received (if the trace token flag send or 'receive'
is set). The system tracer can then print each trace event, write it to a file, or whatever suitable.
Note:
The system tracer only receives those trace events that occur locally within the Erlang node. To get the
whole picture of a sequential trace, involving processes on many Erlang nodes, the output from the system
tracer on each involved node must be merged (offline).
The following sections describe sequential tracing and its most fundamental concepts.
DIFFERENT INFORMATION TRANSFERS
Information flows between processes in a lot of different ways. Not all flows of information will be
covered by sequential tracing. One example is information passed via ETS tables. Below is a list of
information paths that are covered by sequential tracing:
Message Passing:
All ordinary messages passed between Erlang processes.
Exit signals:
An exit signal is represented as an {'EXIT', Pid, Reason} tuple.
Process Spawn:
A process spawn is represented as multiple information transfers. At least one spawn request and one
spawn reply. The actual amount of information transfers depends on what type of spawn it is and may
also change in future implementations. Note that this is more or less an internal protocol that you
are peeking at. The spawn request will be represented as a tuple with the first element containing
the atom spawn_request, but this is more or less all that you can depend on.
Note:
If you do ordinary send or receive trace on the system, you will only see ordinary message passing, not
the other information transfers listed above.
Note:
When a send event and corresponding receive event do not both correspond to ordinary Erlang messages, the
Message part of the trace messages may not be identical. This since all information not necessarily are
available when generating the trace messages.
TRACE TOKEN
Each process has a current trace token which is "invisibly" passed from the parent process on creation of
the process.
The current token of a process is set in one of the following two ways:
* Explicitly by the process itself, through a call to seq_trace:set_token/1,2
* When information is received. This is typically when a received message is matched out in a receive
expression, but also when information is received in other ways.
In both cases, the current token is set. In particular, if the token of a received message is empty, the
current token of the process is set to empty.
A trace token contains a label and a set of flags. Both the label and the flags are set in both
alternatives above.
SERIAL
The trace token contains a component called serial. It consists of two integers, Previous and Current.
The purpose is to uniquely identify each traced event within a trace sequence, as well as to order the
messages chronologically and in the different branches, if any.
The algorithm for updating Serial can be described as follows:
Let each process have two counters, prev_cnt and curr_cnt, both are set to 0 when a process is created
outside of a trace sequence. The counters are updated at the following occasions:
* When the process is about to pass along information to another process and the trace token is not
empty. This typically occurs when sending a message, but also, for example, when spawning another
process.
Let the serial of the trace token be tprev and tcurr.
curr_cnt := curr_cnt + 1
tprev := prev_cnt
tcurr := curr_cnt
The trace token with tprev and tcurr is then passed along with the information passed to the other
process.
* When the process calls seq_trace:print(Label, Info), Label matches the label part of the trace token
and the trace token print flag is true.
The algorithm is the same as for send above.
* When information is received that also contains a non-empty trace token. For example, when a message
is matched out in a receive expression, or when a new process is spawned.
The process trace token is set to the trace token from the message.
Let the serial of the trace token be tprev and tcurr.
if (curr_cnt < tcurr )
curr_cnt := tcurr
prev_cnt := tcurr
curr_cnt of a process is incremented each time the process is involved in a sequential trace. The counter
can reach its limit (27 bits) if a process is very long-lived and is involved in much sequential tracing.
If the counter overflows, the serial for ordering of the trace events cannot be used. To prevent the
counter from overflowing in the middle of a sequential trace, function seq_trace:reset_trace/0 can be
called to reset prev_cnt and curr_cnt of all processes in the Erlang node. This function also sets all
trace tokens in processes and their message queues to empty, and thus stops all ongoing sequential
tracing.
PERFORMANCE CONSIDERATIONS
The performance degradation for a system that is enabled for sequential tracing is negligible as long as
no tracing is activated. When tracing is activated, there is an extra cost for each traced message, but
all other messages are unaffected.
PORTS
Sequential tracing is not performed across ports.
If the user for some reason wants to pass the trace token to a port, this must be done manually in the
code of the port controlling process. The port controlling processes have to check the appropriate
sequential trace settings (as obtained from seq_trace:get_token/1) and include trace information in the
message data sent to their respective ports.
Similarly, for messages received from a port, a port controller has to retrieve trace-specific
information, and set appropriate sequential trace flags through calls to seq_trace:set_token/2.
DISTRIBUTION
Sequential tracing between nodes is performed transparently. This applies to C-nodes built with
Erl_Interface too. A C-node built with Erl_Interface only maintains one trace token, which means that the
C-node appears as one process from the sequential tracing point of view.
EXAMPLE OF USE
This example gives a rough idea of how the new primitives can be used and what kind of output it
produces.
Assume that you have an initiating process with Pid == <0.30.0> like this:
-module(seqex).
-compile(export_all).
loop(Port) ->
receive
{Port,Message} ->
seq_trace:set_token(label,17),
seq_trace:set_token('receive',true),
seq_trace:set_token(print,true),
seq_trace:print(17,"**** Trace Started ****"),
call_server ! {self(),the_message};
{ack,Ack} ->
ok
end,
loop(Port).
And a registered process call_server with Pid == <0.31.0> like this:
loop() ->
receive
{PortController,Message} ->
Ack = {received, Message},
seq_trace:print(17,"We are here now"),
PortController ! {ack,Ack}
end,
loop().
A possible output from the system's sequential_tracer can be like this:
17:<0.30.0> Info {0,1} WITH
"**** Trace Started ****"
17:<0.31.0> Received {0,2} FROM <0.30.0> WITH
{<0.30.0>,the_message}
17:<0.31.0> Info {2,3} WITH
"We are here now"
17:<0.30.0> Received {2,4} FROM <0.31.0> WITH
{ack,{received,the_message}}
The implementation of a system tracer process that produces this printout can look like this:
tracer() ->
receive
{seq_trace,Label,TraceInfo} ->
print_trace(Label,TraceInfo,false);
{seq_trace,Label,TraceInfo,Ts} ->
print_trace(Label,TraceInfo,Ts);
_Other -> ignore
end,
tracer().
print_trace(Label,TraceInfo,false) ->
io:format("~p:",[Label]),
print_trace(TraceInfo);
print_trace(Label,TraceInfo,Ts) ->
io:format("~p ~p:",[Label,Ts]),
print_trace(TraceInfo).
print_trace({print,Serial,From,_,Info}) ->
io:format("~p Info ~p WITH~n~p~n", [From,Serial,Info]);
print_trace({'receive',Serial,From,To,Message}) ->
io:format("~p Received ~p FROM ~p WITH~n~p~n",
[To,Serial,From,Message]);
print_trace({send,Serial,From,To,Message}) ->
io:format("~p Sent ~p TO ~p WITH~n~p~n",
[From,Serial,To,Message]).
The code that creates a process that runs this tracer function and sets that process as the system tracer
can look like this:
start() ->
Pid = spawn(?MODULE,tracer,[]),
seq_trace:set_system_tracer(Pid), % set Pid as the system tracer
ok.
With a function like test/0, the whole example can be started:
test() ->
P = spawn(?MODULE, loop, [port]),
register(call_server, spawn(?MODULE, loop, [])),
start(),
P ! {port,message}.
Ericsson AB kernel 8.5.4.2 seq_trace(3erl)