Provided by: tcllib_1.21+dfsg-1_all 
NAME
math::probopt - Probabilistic optimisation methods
SYNOPSIS
package require Tcl 8.6
package require TclOO
package require math::probopt 1
::math::probopt::pso function bounds args
::math::probopt::sce function bounds args
::math::probopt::diffev function bounds args
::math::probopt::lipoMax function bounds args
::math::probopt::adaLipoMax function bounds args
________________________________________________________________________________________________________________
DESCRIPTION
The purpose of the math::probopt package is to provide various optimisation algorithms that are based on
probabilistic techniques. The results of these algorithms may therefore vary from one run to the next.
The algorithms are all well-known and well described and proponents generally claim they are efficient
and reliable.
As most of these algorithms have one or more tunable parameters or even variations, the interface to each
accepts options to set these parameters or the select the variation. These take the form of key-value
pairs, for instance, -iterations 100.
This manual does not offer any recommendations with regards to these algorithms, nor does it provide much
in the way of guidelines for the parameters. For this we refer to online articles on the algorithms in
question.
A few notes, however:
• With the exception of LIPO, the algorithms are capable of dealing with irregular (non-smooth) and
even discontinuous functions.
• The results depend on the random number seeding and are likely not to be very accurate, especially
if the function varies slowly in the vicinty of the optimum. They do give a good starting point
for a deterministic algorithm.
The collection consists of the following algorithms:
• PSO - particle swarm optimisation
• SCE - shuffled complexes evolution
• DE - differential evolution
• LIPO - Lipschitz optimisation
The various procedures have a uniform interface:
set result [::math::probopt::algorithm function bounds args]
The arguments have the following meaning:
• The argument function is the name of the procedure that evaluates the function. Its interface is:
set value [function coords]
where coords is a list of coordinates at which to evaluate the function. It is supposed to return
the function value.
• The argument bounds is a list of pairs of minimum and maximum for each coordinate. This list
implicitly determines the dimension of the coordinate space in which the optimum is to be sought,
for instance for a function like x**2 + (y-1)**4, you may specify the bounds as {{-1 1} {-1 1}},
that is, two pairs for the two coordinates.
• The rest (args) consists of zero or more key-value pairs to specify the options. Which options are
supported by which algorithm, is documented below.
The result of the various optimisation procedures is a dictionary containing at least the following
elements:
• optimum-coordinates is a list containing the coordinates of the optimum that was found.
• optimum-value is the function value at those coordinates.
• evaluations is the number of function evaluations.
• best-values is a list of successive best values, obtained as part of the iterations.
DETAILS ON THE ALGORITHMS
The algorithms in the package are the following:
::math::probopt::pso function bounds args
The "particle swarm optimisation" algorithm uses the idea that the candidate optimum points should
swarm around the best point found so far, with variations to allow for improvements.
It recognises the following options:
• -swarmsize number: Number of particles to consider (default: 50)
• -vweight value: Weight for the current "velocity" (0-1, default: 0.5)
• -pweight value: Weight for the individual particle's best position (0-1, default: 0.3)
• -gweight value: Weight for the "best" overall position as per particle (0-1, default:
0.3)
• -type local/global: Type of optimisation
• -neighbours number: Size of the neighbourhood (default: 5, used if "local")
• -iterations number: Maximum number of iterations
• -tolerance value: Absolute minimal improvement for minimum value
::math::probopt::sce function bounds args
The "shuffled complex evolution" algorithm is an extension of the Nelder-Mead algorithm that uses
multiple complexes and reorganises these complexes to find the "global" optimum.
It recognises the following options:
• -complexes number: Number of particles to consider (default: 2)
• -mincomplexes number: Minimum number of complexes (default: 2; not currently used)
• -newpoints number: Number of new points to be generated (default: 1)
• -shuffle number: Number of iterations after which to reshuffle the complexes
(if set to 0, the default, a number will be calculated from the number of dimensions)
• -pointspercomplex number: Number of points per complex (if set to 0, the default, a
number will be calculated from the number of dimensions)
• -pointspersubcomplex number: Number of points per subcomplex (used to select the best
points in each complex; if set to 0, the default, a number will be calculated from the
number of dimensions)
• -iterations number: Maximum number of iterations (default: 100)
• -maxevaluations number: Maximum number of function evaluations (when this number is
reached the iteration is broken off. Default: 1000 million)
• -abstolerance value: Absolute minimal improvement for minimum value (default: 0.0)
• -reltolerance value: Relative minimal improvement for minimum value (default: 0.001)
::math::probopt::diffev function bounds args
The "differential evolution" algorithm uses a number of initial points that are then updated using
randomly selected points. It is more or less akin to genetic algorithms. It is controlled by two
parameters, factor and lambda, where the first determines the update via random points and the
second the update with the best point found sofar.
It recognises the following options:
• -iterations number: Maximum number of iterations (default: 100)
• -number number: Number of point to work with (if set to 0, the default, it is
calculated from the number of dimensions)
• -factor value: Weight of randomly selected points in the updating (0-1,
default: 0.6)
• -lambda value: Weight of the best point found so far in the updating (0-1,
default: 0.0)
• -crossover value: Fraction of new points to be considered for replacing the old
ones (0-1, default: 0.5)
• -maxevaluations number: Maximum number of function evaluations (when this number is
reached the iteration is broken off. Default: 1000 million)
• -abstolerance value: Absolute minimal improvement for minimum value (default: 0.0)
• -reltolerance value: Relative minimal improvement for minimum value (default: 0.001)
::math::probopt::lipoMax function bounds args
The "Lipschitz optimisation" algorithm uses the "Lipschitz" property of the given function to find
a maximum in the given bounding box. There are two variants, lipoMax assumes a fixed estimate for
the Lipschitz parameter.
It recognises the following options:
• -iterations number: Number of iterations (equals the actual number of function
evaluations, default: 100)
• -lipschitz value: Estimate of the Lipschitz parameter (default: 10.0)
::math::probopt::adaLipoMax function bounds args
The "adaptive Lipschitz optimisation" algorithm uses the "Lipschitz" property of the given
function to find a maximum in the given bounding box. The adaptive variant actually uses two
phases to find a suitable estimate for the Lipschitz parameter. This is controlled by the
"Bernoulli" parameter.
When you specify a large number of iterations, the algorithm may take a very long time to complete
as it is trying to improve on the Lipschitz parameter and the chances of hitting a better estimate
diminish fast.
It recognises the following options:
• -iterations number: Number of iterations (equals the actual number of function
evaluations, default: 100)
• -bernoulli value: Parameter for random decisions (exploration versus
exploitation, default: 0.1)
REFERENCES
The various algorithms have been described in on-line publications. Here are a few:
• PSO: Maurice Clerc, Standard Particle Swarm Optimisation (2012) https://hal.archives-
ouvertes.fr/file/index/docid/764996/filename/SPSO_descriptions.pdf
Alternatively: https://en.wikipedia.org/wiki/Particle_swarm_optimization
• SCE: Qingyuan Duan, Soroosh Sorooshian, Vijai K. Gupta, Optimal use offo the SCE-UA global
optimization method for calibrating watershed models (1994), Journal of Hydrology 158, pp 265-284
https://www.researchgate.net/publication/223408756_Optimal_Use_of_the_SCE-
UA_Global_Optimization_Method_for_Calibrating_Watershed_Models
• DE: Rainer Storn and Kenneth Price, Differential Evolution - A simple and efficient adaptivescheme
for globaloptimization over continuous spaces (1996)
http://www1.icsi.berkeley.edu/~storn/TR-95-012.pdf
• LIPO: Cedric Malherbe and Nicolas Vayatis, Global optimization of Lipschitz functions, (june 2017)
https://arxiv.org/pdf/1703.02628.pdf
KEYWORDS
mathematics, optimisation, probabilistic calculations
CATEGORY
Mathematics
tcllib 1 math::probopt(3tcl)