Provided by: manpages-posix-dev_2017a-2_all bug

PROLOG

       This  manual  page  is part of the POSIX Programmer's Manual.  The Linux implementation of this interface
       may differ (consult the corresponding Linux manual page for details of Linux behavior), or the  interface
       may not be implemented on Linux.

NAME

       lockf — record locking on files

SYNOPSIS

       #include <unistd.h>

       int lockf(int fildes, int function, off_t size);

DESCRIPTION

       The  lockf()  function  shall  lock  sections  of  a file with advisory-mode locks. Calls to lockf() from
       threads in other processes which attempt to lock the locked file section shall  either  return  an  error
       value  or  block  until  the  section  becomes unlocked. All the locks for a process are removed when the
       process terminates. Record locking with lockf() shall be supported for regular files and may be supported
       for other files.

       The fildes argument is an open file descriptor.  To  establish  a  lock  with  this  function,  the  file
       descriptor shall be opened with write-only permission (O_WRONLY) or with read/write permission (O_RDWR).

       The  function  argument is a control value which specifies the action to be taken. The permissible values
       for function are defined in <unistd.h> as follows:
                             ┌──────────┬──────────────────────────────────────────────┐
                             │ FunctionDescription                  │
                             ├──────────┼──────────────────────────────────────────────┤
                             │ F_ULOCK  │ Unlock locked sections.                      │
                             │ F_LOCK   │ Lock a section for exclusive use.            │
                             │ F_TLOCK  │ Test and lock a section for exclusive use.   │
                             │ F_TEST   │ Test a section for locks by other processes. │
                             └──────────┴──────────────────────────────────────────────┘

       F_TEST shall detect if a lock by another process is present on the specified section.

       F_LOCK and F_TLOCK shall both lock a section of a file if the section is available.

       F_ULOCK shall remove locks from a section of the file.

       The size argument is the number of contiguous bytes to be locked or unlocked.  The section to  be  locked
       or  unlocked starts at the current offset in the file and extends forward for a positive size or backward
       for a negative size (the preceding bytes up to but not including the current offset). If size is  0,  the
       section  from  the current offset through the largest possible file offset shall be locked (that is, from
       the current offset through the present or any future end-of-file). An area need not be allocated  to  the
       file to be locked because locks may exist past the end-of-file.

       The  sections  locked  with  F_LOCK  or  F_TLOCK  may,  in whole or in part, contain or be contained by a
       previously locked section for the same process. When this occurs, or if adjacent  locked  sections  would
       occur, the sections shall be combined into a single locked section. If the request would cause the number
       of locks to exceed a system-imposed limit, the request shall fail.

       F_LOCK and F_TLOCK requests differ only by the action taken if the section is not available. F_LOCK shall
       block  the calling thread until the section is available. F_TLOCK shall cause the function to fail if the
       section is already locked by another process.

       File locks shall be released on first close by the locking process of any file descriptor for the file.

       F_ULOCK requests may release (wholly or in part) one or more locked sections controlled by  the  process.
       Locked  sections  shall be unlocked starting at the current file offset through size bytes or to the end-
       of-file if size is (off_t)0. When all of a locked section is not released (that is, when the beginning or
       end of the area to be unlocked falls within a locked section), the remaining  portions  of  that  section
       shall  remain  locked  by  the  process. Releasing the center portion of a locked section shall cause the
       remaining locked beginning and end portions to become two separate locked sections. If the request  would
       cause the number of locks in the system to exceed a system-imposed limit, the request shall fail.

       A  potential  for deadlock occurs if the threads of a process controlling a locked section are blocked by
       accessing a locked section of another process. If the system detects that deadlock would  occur,  lockf()
       shall fail with an [EDEADLK] error.

       The interaction between fcntl() and lockf() locks is unspecified.

       Blocking on a section shall be interrupted by any signal.

       An  F_ULOCK request in which size is non-zero and the offset of the last byte of the requested section is
       the maximum value for an object of type off_t, when the process has an existing lock in which size  is  0
       and  which  includes the last byte of the requested section, shall be treated as a request to unlock from
       the start of the requested section with a size equal to 0. Otherwise, an F_ULOCK request shall attempt to
       unlock only the requested section.

       Attempting to lock a section of a file that is associated with a  buffered  stream  produces  unspecified
       results.

RETURN VALUE

       Upon  successful completion, lockf() shall return 0. Otherwise, it shall return -1, set errno to indicate
       an error, and existing locks shall not be changed.

ERRORS

       The lockf() function shall fail if:

       EBADF  The fildes argument is not a valid open file descriptor; or function  is  F_LOCK  or  F_TLOCK  and
              fildes is not a valid file descriptor open for writing.

       EACCES or EAGAIN
              The function argument is F_TLOCK or F_TEST and the section is already locked by another process.

       EDEADLK
              The function argument is F_LOCK and a deadlock is detected.

       EINTR  A signal was caught during execution of the function.

       EINVAL The  function argument is not one of F_LOCK, F_TLOCK, F_TEST, or F_ULOCK; or size plus the current
              file offset is less than 0.

       EOVERFLOW
              The offset of the first, or if size is not 0 then the last, byte in the requested  section  cannot
              be represented correctly in an object of type off_t.

       The lockf() function may fail if:

       EAGAIN The function argument is F_LOCK or F_TLOCK and the file is mapped with mmap().

       EDEADLK or ENOLCK
              The  function  argument  is F_LOCK, F_TLOCK, or F_ULOCK, and the request would cause the number of
              locks to exceed a system-imposed limit.

       EOPNOTSUPP or EINVAL
              The implementation does not support the locking of files of  the  type  indicated  by  the  fildes
              argument.

       The following sections are informative.

EXAMPLES

   Locking a Portion of a File
       In the following example, a file named /home/cnd/mod1 is being modified. Other processes that use locking
       are  prevented  from changing it during this process. Only the first 10000 bytes are locked, and the lock
       call fails if another process has any part of this area locked already.

           #include <fcntl.h>
           #include <unistd.h>

           int fildes;
           int status;
           ...
           fildes = open("/home/cnd/mod1", O_RDWR);
           status = lockf(fildes, F_TLOCK, (off_t)10000);

APPLICATION USAGE

       Record-locking should not be used in combination with the fopen(), fread(),  fwrite(),  and  other  stdio
       functions.  Instead,  the  more  primitive,  non-buffered  functions  (such  as  open())  should be used.
       Unexpected results may occur in processes that do buffering in the user address space.  The  process  may
       later  read/write  data which is/was locked. The stdio functions are the most common source of unexpected
       buffering.

       The alarm() function may be used to provide a timeout facility in applications requiring it.

RATIONALE

       None.

FUTURE DIRECTIONS

       None.

SEE ALSO

       alarm(), chmod(), close(), creat(), fcntl(), fopen(), mmap(), open(), read(), write()

       The Base Definitions volume of POSIX.1‐2017, <unistd.h>

COPYRIGHT

       Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1-2017, Standard
       for Information  Technology  --  Portable  Operating  System  Interface  (POSIX),  The  Open  Group  Base
       Specifications  Issue  7, 2018 Edition, Copyright (C) 2018 by the Institute of Electrical and Electronics
       Engineers, Inc and The Open Group.  In the event of any discrepancy between this version and the original
       IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee  document.
       The original Standard can be obtained online at http://www.opengroup.org/unix/online.html .

       Any  typographical  or formatting errors that appear in this page are most likely to have been introduced
       during  the  conversion  of  the  source  files  to  man  page  format.  To  report  such   errors,   see
       https://www.kernel.org/doc/man-pages/reporting_bugs.html .

IEEE/The Open Group                                   2017                                         LOCKF(3POSIX)