Provided by: erlang-manpages_25.3.2.8+dfsg-1ubuntu4.4_all 
NAME
lcnt - A runtime system Lock Profiling tool.
DESCRIPTION
The lcnt module is used to profile the internal ethread locks in the Erlang Runtime System. With lcnt
enabled, internal counters in the runtime system are updated each time a lock is taken. The counters
stores information about the number of acquisition tries and the number of collisions that has occurred
during the acquisition tries. The counters also record the waiting time a lock has caused for a blocked
thread when a collision has occurred.
The data produced by the lock counters will give an estimate on how well the runtime system will behave
from a parallelizable view point for the scenarios tested. This tool was mainly developed to help Erlang
runtime developers iron out potential and generic bottlenecks.
Locks in the emulator are named after what type of resource they protect and where in the emulator they
are initialized, those are lock 'classes'. Most of those locks are also instantiated several times, and
given unique identifiers, to increase locking granularity. Typically an instantiated lock protects a
disjunct set of the resource, for example ets tables, processes or ports. In other cases it protects a
specific range of a resource, for example pix_lock which protects index to process mappings, and is given
a unique number within the class. A unique lock in lcnt is referenced by a name (class) and an
identifier: {Name, Id}.
Some locks in the system are static and protects global resources, for example bif_timers and the
run_queue locks. Other locks are dynamic and not necessarily long lived, for example process locks and
ets-table locks. The statistics data from short lived locks can be stored separately when the locks are
deleted. This behavior is by default turned off to save memory but can be turned on via
lcnt:rt_opt({copy_save, true}). The lcnt:apply/1,2,3 functions enables this behavior during profiling.
EXPORTS
start() -> {ok, Pid} | {error, {already_started, Pid}}
Types:
Pid = pid()
Starts the lock profiler server. The server only act as a medium for the user and performs
filtering and printing of data collected by lcnt:collect/1.
stop() -> ok
Stops the lock profiler server.
collect() -> ok
Same as collect(node()).
collect(Node) -> ok
Types:
Node = node()
Collects lock statistics from the runtime system. The function starts a server if it is not
already started. It then populates the server with lock statistics. If the server held any lock
statistics data before the collect then that data is lost.
clear() -> ok
Same as clear(node()).
clear(Node) -> ok
Types:
Node = node()
Clears the internal lock statistics from the runtime system. This does not clear the data on the
server only on runtime system. All counters for static locks are zeroed, all dynamic locks
currently alive are zeroed and all saved locks now destroyed are removed. It also resets the
duration timer.
conflicts() -> ok
Same as conflicts([]).
conflicts(Options) -> ok
Types:
Options = [option()]
option() =
{sort, Sort :: sort()} |
{reverse, boolean()} |
{locations, boolean()} |
{thresholds, Thresholds :: [threshold()]} |
{print,
PrintOptions :: [print() | {print(), integer() >= 0}]} |
{max_locks, MaxLocks :: integer() >= 0 | none} |
{combine, boolean()}
print() =
colls | duration | entry | id | name | ratio | time | tries |
type
sort() =
colls | entry | id | name | ratio | time | tries | type
threshold() =
{colls, integer() >= 0} |
{time, integer() >= 0} |
{tries, integer() >= 0}
Prints a list of internal locks and its statistics.
For option description, see lcnt:inspect/2.
locations() -> ok
Same as locations([]).
locations(Options) -> ok
Types:
Options = [option()]
option() =
{sort, Sort :: sort()} |
{reverse, boolean()} |
{locations, boolean()} |
{thresholds, Thresholds :: [threshold()]} |
{print,
PrintOptions :: [print() | {print(), integer() >= 0}]} |
{max_locks, MaxLocks :: integer() >= 0 | none} |
{combine, boolean()}
print() =
colls | duration | entry | id | name | ratio | time | tries |
type
sort() =
colls | entry | id | name | ratio | time | tries | type
threshold() =
{colls, integer() >= 0} |
{time, integer() >= 0} |
{tries, integer() >= 0}
Prints a list of internal lock counters by source code locations.
For option description, see lcnt:inspect/2.
inspect(Lock) -> ok
Types:
Lock = Name | {Name, Id | [Id]}
Name = atom() | pid() | port()
Id = atom() | integer() | pid() | port()
Same as inspect(Lock, []).
inspect(Lock, Options) -> ok
Types:
Lock = Name | {Name, Id | [Id]}
Name = atom() | pid() | port()
Id = atom() | integer() | pid() | port()
Options = [option()]
option() =
{sort, Sort :: sort()} |
{reverse, boolean()} |
{locations, boolean()} |
{thresholds, Thresholds :: [threshold()]} |
{print,
PrintOptions :: [print() | {print(), integer() >= 0}]} |
{max_locks, MaxLocks :: integer() >= 0 | none} |
{combine, boolean()}
print() =
colls | duration | entry | id | name | ratio | time | tries |
type
sort() =
colls | entry | id | name | ratio | time | tries | type
threshold() =
{colls, integer() >= 0} |
{time, integer() >= 0} |
{tries, integer() >= 0}
Prints a list of internal lock counters for a specific lock.
Lock Name and Id for ports and processes are interchangeable with the use of lcnt:swap_pid_keys/0
and is the reason why pid() and port() options can be used in both Name and Id space. Both pids
and ports are special identifiers with stripped creation and can be recreated with lcnt:pid/2,3
and lcnt:port/1,2.
Option description:
{combine, boolean()}:
Combine the statistics from different instances of a lock class.
Default: true
{locations, boolean()}:
Print the statistics by source file and line numbers.
Default: false
{max_locks, MaxLocks}:
Maximum number of locks printed or no limit with none.
Default: 20
{print, PrintOptions}:
Printing options:
name:
Named lock or named set of locks (classes). The same name used for initializing the lock in
the VM.
id:
Internal id for set of locks, not always unique. This could be table name for ets tables
(db_tab), port id for ports, integer identifiers for allocators, etc.
type:
Type of lock: rw_mutex, mutex, spinlock, rw_spinlock or proclock.
entry:
In combination with {locations, true} this option prints the lock operations source file and
line number entry-points along with statistics for each entry.
tries:
Number of acquisitions of this lock.
colls:
Number of collisions when a thread tried to acquire this lock. This is when a trylock is
EBUSY, a write try on read held rw_lock, a try read on write held rw_lock, a thread tries to
lock an already locked lock. (Internal states supervises this).
ratio:
The ratio between the number of collisions and the number of tries (acquisitions) in
percentage.
time:
Accumulated waiting time for this lock. This could be greater than actual wall clock time,
it is accumulated for all threads. Trylock conflicts does not accumulate time.
duration:
Percentage of accumulated waiting time of wall clock time. This percentage can be higher
than 100% since accumulated time is from all threads.
Default: [name,id,tries,colls,ratio,time,duration]
{reverse, boolean()}:
Reverses the order of sorting.
Default: false
{sort, Sort}:
Column sorting orders.
Default: time
{thresholds, Thresholds}:
Filtering thresholds. Anything values above the threshold value are passed through.
Default: [{tries, 0}, {colls, 0}, {time, 0}]
information() -> ok
Prints lcnt server state and generic information about collected lock statistics.
swap_pid_keys() -> ok
Swaps places on Name and Id space for ports and processes.
load(Filename) -> ok
Types:
Filename = file:filename()
Restores previously saved data to the server.
save(Filename) -> ok
Types:
Filename = file:filename()
Saves the collected data to file.
CONVENIENCE FUNCTIONS
The following functions are used for convenience.
EXPORTS
apply(Fun) -> term()
Types:
Fun = function()
Same as apply(Fun, []).
apply(Fun, Args) -> term()
Types:
Fun = function()
Args = [term()]
Clears the lock counters and then setups the instrumentation to save all destroyed locks. After
setup the function is called, passing the elements in Args as arguments. When the function returns
the statistics are immediately collected to the server. After the collection the instrumentation
is returned to its previous behavior. The result of the applied function is returned.
Warning:
This function should only be used for micro-benchmarks; it sets copy_save to true for the duration
of the call, which can quickly lead to running out of memory.
apply(Module, Function, Args) -> term()
Types:
Module = module()
Function = atom()
Args = [term()]
Same as apply(fun() -> erlang:apply(Module, Function, Args) end).
pid(Id, Serial) -> pid()
Types:
Id = Serial = integer()
Same as pid(node(), Id, Serial).
pid(Node, Id, Serial) -> pid()
Types:
Node = node()
Id = Serial = integer()
Creates a process id with creation 0.
port(Id) -> port()
Types:
Id = integer()
Same as port(node(), Id).
port(Node, Id) -> port()
Types:
Node = node()
Id = integer()
Creates a port id with creation 0.
INTERNAL RUNTIME LOCK COUNTER CONTROLLERS
The following functions control the behavior of the internal counters.
EXPORTS
rt_collect() -> [lock_counter_data()]
Types:
lock_counter_data() = term()
Same as rt_collect(node()).
rt_collect(Node) -> [lock_counter_data()]
Types:
Node = node()
lock_counter_data() = term()
Returns a list of raw lock counter data.
rt_clear() -> ok
Same as rt_clear(node()).
rt_clear(Node) -> ok
Types:
Node = node()
Clear the internal counters. Same as lcnt:clear(Node).
rt_mask() -> [category_atom()]
Types:
category_atom() = atom()
Same as rt_mask(node()).
rt_mask(Node) -> [category_atom()]
Types:
Node = node()
category_atom() = atom()
Refer to rt_mask/2. for a list of valid categories. All categories are enabled by default.
rt_mask(Categories) -> ok | {error, copy_save_enabled}
Types:
Categories = [category_atom()]
category_atom() = atom()
Same as rt_mask(node(), Categories).
rt_mask(Node, Categories) -> ok | {error, copy_save_enabled}
Types:
Node = node()
Categories = [category_atom()]
category_atom() = atom()
Sets the lock category mask to the given categories.
This will fail if the copy_save option is enabled; see lcnt:rt_opt/2.
Valid categories are:
* allocator
* db (ETS tables)
* debug
* distribution
* generic
* io
* process
* scheduler
This list is subject to change at any time, as is the category any given lock may belong to.
rt_opt(Option) -> boolean()
Types:
Option = {Type, Value :: boolean()}
Type = copy_save | process_locks
Same as rt_opt(node(), {Type, Value}).
rt_opt(Node, Option) -> boolean()
Types:
Node = node()
Option = {Type, Value :: boolean()}
Type = copy_save | process_locks
Option description:
{copy_save, boolean()}:
Retains the statistics of destroyed locks.
Default: false
Warning:
This option will use a lot of memory when enabled, which must be reclaimed with lcnt:rt_clear.
Note that it makes no distinction between locks that were destroyed and locks for which counting
was disabled, so enabling this option will disable changes to the lock category mask.
{process_locks, boolean()}:
Profile process locks, equal to adding process to the lock category mask; see lcnt:rt_mask/2
Default: true
SEE ALSO
LCNT User's Guide
Ericsson AB tools 3.5.3 lcnt(3erl)