Provided by: libfabric-dev_1.17.0-3build2_amd64 
NAME
fi_msg - Message data transfer operations
fi_recv / fi_recvv / fi_recvmsg
Post a buffer to receive an incoming message
fi_send / fi_sendv / fi_sendmsg fi_inject / fi_senddata : Initiate an operation to send a message
SYNOPSIS
#include <rdma/fi_endpoint.h>
ssize_t fi_recv(struct fid_ep *ep, void * buf, size_t len,
void *desc, fi_addr_t src_addr, void *context);
ssize_t fi_recvv(struct fid_ep *ep, const struct iovec *iov, void **desc,
size_t count, fi_addr_t src_addr, void *context);
ssize_t fi_recvmsg(struct fid_ep *ep, const struct fi_msg *msg,
uint64_t flags);
ssize_t fi_send(struct fid_ep *ep, const void *buf, size_t len,
void *desc, fi_addr_t dest_addr, void *context);
ssize_t fi_sendv(struct fid_ep *ep, const struct iovec *iov,
void **desc, size_t count, fi_addr_t dest_addr, void *context);
ssize_t fi_sendmsg(struct fid_ep *ep, const struct fi_msg *msg,
uint64_t flags);
ssize_t fi_inject(struct fid_ep *ep, const void *buf, size_t len,
fi_addr_t dest_addr);
ssize_t fi_senddata(struct fid_ep *ep, const void *buf, size_t len,
void *desc, uint64_t data, fi_addr_t dest_addr, void *context);
ssize_t fi_injectdata(struct fid_ep *ep, const void *buf, size_t len,
uint64_t data, fi_addr_t dest_addr);
ARGUMENTS
ep Fabric endpoint on which to initiate send or post receive buffer.
buf Data buffer to send or receive.
len Length of data buffer to send or receive, specified in bytes. Valid transfers are from 0 bytes up
to the endpoint’s max_msg_size.
iov Vectored data buffer.
count Count of vectored data entries.
desc Descriptor associated with the data buffer. See fi_mr(3).
data Remote CQ data to transfer with the sent message.
dest_addr
Destination address for connectionless transfers. Ignored for connected endpoints.
src_addr
Source address to receive from for connectionless transfers. Applies only to connectionless end‐
points with the FI_DIRECTED_RECV capability enabled, otherwise this field is ignored. If set to
FI_ADDR_UNSPEC, any source address may match.
msg Message descriptor for send and receive operations.
flags Additional flags to apply for the send or receive operation.
context
User specified pointer to associate with the operation. This parameter is ignored if the opera‐
tion will not generate a successful completion, unless an op flag specifies the context parameter
be used for required input.
DESCRIPTION
The send functions – fi_send, fi_sendv, fi_sendmsg, fi_inject, and fi_senddata – are used to transmit a
message from one endpoint to another endpoint. The main difference between send functions are the number
and type of parameters that they accept as input. Otherwise, they perform the same general function.
Messages sent using fi_msg operations are received by a remote endpoint into a buffer posted to receive
such messages.
The receive functions – fi_recv, fi_recvv, fi_recvmsg – post a data buffer to an endpoint to receive in‐
bound messages. Similar to the send operations, receive operations operate asynchronously. Users should
not touch the posted data buffer(s) until the receive operation has completed.
An endpoint must be enabled before an application can post send or receive operations to it. For con‐
nected endpoints, receive buffers may be posted prior to connect or accept being called on the endpoint.
This ensures that buffers are available to receive incoming data immediately after the connection has
been established.
Completed message operations are reported to the user through one or more event collectors associated
with the endpoint. Users provide context which are associated with each operation, and is returned to
the user as part of the event completion. See fi_cq for completion event details.
fi_send
The call fi_send transfers the data contained in the user-specified data buffer to a remote endpoint,
with message boundaries being maintained.
fi_sendv
The fi_sendv call adds support for a scatter-gather list to fi_send. The fi_sendv transfers the set of
data buffers referenced by the iov parameter to a remote endpoint as a single message.
fi_sendmsg
The fi_sendmsg call supports data transfers over both connected and connectionless endpoints, with the
ability to control the send operation per call through the use of flags. The fi_sendmsg function takes a
struct fi_msg as input.
struct fi_msg {
const struct iovec *msg_iov; /* scatter-gather array */
void **desc; /* local request descriptors */
size_t iov_count;/* # elements in iov */
fi_addr_t addr; /* optional endpoint address */
void *context; /* user-defined context */
uint64_t data; /* optional message data */
};
fi_inject
The send inject call is an optimized version of fi_send with the following characteristics. The data
buffer is available for reuse immediately on return from the call, and no CQ entry will be written if the
transfer completes successfully.
Conceptually, this means that the fi_inject function behaves as if the FI_INJECT transfer flag were set,
selective completions are enabled, and the FI_COMPLETION flag is not specified. Note that the CQ entry
will be suppressed even if the default behavior of the endpoint is to write CQ entries for all successful
completions. See the flags discussion below for more details. The requested message size that can be
used with fi_inject is limited by inject_size.
fi_senddata
The send data call is similar to fi_send, but allows for the sending of remote CQ data (see FI_RE‐
MOTE_CQ_DATA flag) as part of the transfer.
fi_injectdata
The inject data call is similar to fi_inject, but allows for the sending of remote CQ data (see FI_RE‐
MOTE_CQ_DATA flag) as part of the transfer.
fi_recv
The fi_recv call posts a data buffer to the receive queue of the corresponding endpoint. Posted receives
are searched in the order in which they were posted in order to match sends. Message boundaries are
maintained. The order in which the receives complete is dependent on the endpoint type and protocol.
For connectionless endpoints, the src_addr parameter can be used to indicate that a buffer should be
posted to receive incoming data from a specific remote endpoint.
fi_recvv
The fi_recvv call adds support for a scatter-gather list to fi_recv. The fi_recvv posts the set of data
buffers referenced by the iov parameter to a receive incoming data.
fi_recvmsg
The fi_recvmsg call supports posting buffers over both connected and connectionless endpoints, with the
ability to control the receive operation per call through the use of flags. The fi_recvmsg function
takes a struct fi_msg as input.
FLAGS
The fi_recvmsg and fi_sendmsg calls allow the user to specify flags which can change the default message
handling of the endpoint. Flags specified with fi_recvmsg / fi_sendmsg override most flags previously
configured with the endpoint, except where noted (see fi_endpoint.3). The following list of flags are
usable with fi_recvmsg and/or fi_sendmsg.
FI_REMOTE_CQ_DATA
Applies to fi_sendmsg and fi_senddata. Indicates that remote CQ data is available and should be
sent as part of the request. See fi_getinfo for additional details on FI_REMOTE_CQ_DATA.
FI_CLAIM
Applies to posted receive operations for endpoints configured for FI_BUFFERED_RECV or FI_VARI‐
ABLE_MSG. This flag is used to retrieve a message that was buffered by the provider. See the
Buffered Receives section for details.
FI_COMPLETION
Indicates that a completion entry should be generated for the specified operation. The endpoint
must be bound to a completion queue with FI_SELECTIVE_COMPLETION that corresponds to the specified
operation, or this flag is ignored.
FI_DISCARD
Applies to posted receive operations for endpoints configured for FI_BUFFERED_RECV or FI_VARI‐
ABLE_MSG. This flag is used to free a message that was buffered by the provider. See the
Buffered Receives section for details.
FI_MORE
Indicates that the user has additional requests that will immediately be posted after the current
call returns. Use of this flag may improve performance by enabling the provider to optimize its
access to the fabric hardware.
FI_INJECT
Applies to fi_sendmsg. Indicates that the outbound data buffer should be returned to user immedi‐
ately after the send call returns, even if the operation is handled asynchronously. This may re‐
quire that the underlying provider implementation copy the data into a local buffer and transfer
out of that buffer. This flag can only be used with messages smaller than inject_size.
FI_MULTI_RECV
Applies to posted receive operations. This flag allows the user to post a single buffer that will
receive multiple incoming messages. Received messages will be packed into the receive buffer un‐
til the buffer has been consumed. Use of this flag may cause a single posted receive operation to
generate multiple events as messages are placed into the buffer. The placement of received data
into the buffer may be subjected to provider specific alignment restrictions.
The buffer will be released by the provider when the available buffer space falls below the specified
minimum (see FI_OPT_MIN_MULTI_RECV). Note that an entry to the associated receive completion queue will
always be generated when the buffer has been consumed, even if other receive completions have been sup‐
pressed (i.e. the Rx context has been configured for FI_SELECTIVE_COMPLETION). See the FI_MULTI_RECV
completion flag fi_cq(3).
FI_INJECT_COMPLETE
Applies to fi_sendmsg. Indicates that a completion should be generated when the source buffer(s)
may be reused.
FI_TRANSMIT_COMPLETE
Applies to fi_sendmsg and fi_recvmsg. For sends, indicates that a completion should not be gener‐
ated until the operation has been successfully transmitted and is no longer being tracked by the
provider. For receive operations, indicates that a completion may be generated as soon as the
message has been processed by the local provider, even if the message data may not be visible to
all processing elements. See fi_cq(3) for target side completion semantics.
FI_DELIVERY_COMPLETE
Applies to fi_sendmsg. Indicates that a completion should be generated when the operation has
been processed by the destination.
FI_FENCE
Applies to transmits. Indicates that the requested operation, also known as the fenced operation,
and any operation posted after the fenced operation will be deferred until all previous operations
targeting the same peer endpoint have completed. Operations posted after the fencing will see
and/or replace the results of any operations initiated prior to the fenced operation.
The ordering of operations starting at the posting of the fenced operation (inclusive) to the posting of
a subsequent fenced operation (exclusive) is controlled by the endpoint’s ordering semantics.
FI_MULTICAST
Applies to transmits. This flag indicates that the address specified as the data transfer desti‐
nation is a multicast address. This flag must be used in all multicast transfers, in conjunction
with a multicast fi_addr_t.
Buffered Receives
Buffered receives indicate that the networking layer allocates and manages the data buffers used to re‐
ceive network data transfers. As a result, received messages must be copied from the network buffers in‐
to application buffers for processing. However, applications can avoid this copy if they are able to
process the message in place (directly from the networking buffers).
Handling buffered receives differs based on the size of the message being sent. In general, smaller mes‐
sages are passed directly to the application for processing. However, for large messages, an application
will only receive the start of the message and must claim the rest. The details for how small messages
are reported and large messages may be claimed are described below.
When a provider receives a message, it will write an entry to the completion queue associated with the
receiving endpoint. For discussion purposes, the completion queue is assumed to be configured for
FI_CQ_FORMAT_DATA. Since buffered receives are not associated with application posted buffers, the CQ
entry op_context will point to a struct fi_recv_context.
struct fi_recv_context {
struct fid_ep *ep;
void *context;
};
The `ep' field will point to the receiving endpoint or Rx context, and `context' will be NULL. The CQ
entry’s `buf' will point to a provider managed buffer where the start of the received message is located,
and `len' will be set to the total size of the message.
The maximum sized message that a provider can buffer is limited by an FI_OPT_BUFFERED_LIMIT. This
threshold can be obtained and may be adjusted by the application using the fi_getopt and fi_setopt calls,
respectively. Any adjustments must be made prior to enabling the endpoint. The CQ entry `buf' will
point to a buffer of received data. If the sent message is larger than the buffered amount, the CQ entry
`flags' will have the FI_MORE bit set. When the FI_MORE bit is set, `buf' will reference at least
FI_OPT_BUFFERED_MIN bytes of data (see fi_endpoint.3 for more info).
After being notified that a buffered receive has arrived, applications must either claim or discard the
message. Typically, small messages are processed and discarded, while large messages are claimed. How‐
ever, an application is free to claim or discard any message regardless of message size.
To claim a message, an application must post a receive operation with the FI_CLAIM flag set. The struct
fi_recv_context returned as part of the notification must be provided as the receive operation’s context.
The struct fi_recv_context contains a `context' field. Applications may modify this field prior to
claiming the message. When the claim operation completes, a standard receive completion entry will be
generated on the completion queue. The `context' of the associated CQ entry will be set to the `context'
value passed in through the fi_recv_context structure, and the CQ entry flags will have the FI_CLAIM bit
set.
Buffered receives that are not claimed must be discarded by the application when it is done processing
the CQ entry data. To discard a message, an application must post a receive operation with the FI_DIS‐
CARD flag set. The struct fi_recv_context returned as part of the notification must be provided as the
receive operation’s context. When the FI_DISCARD flag is set for a receive operation, the receive input
buffer(s) and length parameters are ignored.
IMPORTANT: Buffered receives must be claimed or discarded in a timely manner. Failure to do so may re‐
sult in increased memory usage for network buffering or communication stalls. Once a buffered receive
has been claimed or discarded, the original CQ entry `buf' or struct fi_recv_context data may no longer
be accessed by the application.
The use of the FI_CLAIM and FI_DISCARD operation flags is also described with respect to tagged message
transfers in fi_tagged.3. Buffered receives of tagged messages will include the message tag as part of
the CQ entry, if available.
The handling of buffered receives follows all message ordering restrictions assigned to an endpoint. For
example, completions may indicate the order in which received messages arrived at the receiver based on
the endpoint attributes.
Variable Length Messages
Variable length messages, or simply variable messages, are transfers where the size of the message is un‐
known to the receiver prior to the message being sent. It indicates that the recipient of a message does
not know the amount of data to expect prior to the message arriving. It is most commonly used when the
size of message transfers varies greatly, with very large messages interspersed with much smaller mes‐
sages, making receive side message buffering difficult to manage. Variable messages are not subject to
max message length restrictions (i.e. struct fi_ep_attr::max_msg_size limits), and may be up to the maxi‐
mum value of size_t (e.g. SIZE_MAX) in length.
Variable length messages support requests that the provider allocate and manage the network message
buffers. As a result, the application requirements and provider behavior is identical as those defined
for supporting the FI_BUFFERED_RECV mode bit. See the Buffered Receive section above for details. The
main difference is that buffered receives are limited by the fi_ep_attr::max_msg_size threshold, whereas
variable length messages are not.
Support for variable messages is indicated through the FI_VARIABLE_MSG capability bit.
NOTES
If an endpoint has been configured with FI_MSG_PREFIX, the application must include buffer space of size
msg_prefix_size, as specified by the endpoint attributes. The prefix buffer must occur at the start of
the data referenced by the buf parameter, or be referenced by the first IO vector. Message prefix space
cannot be split between multiple IO vectors. The size of the prefix buffer should be included as part of
the total buffer length.
RETURN VALUE
Returns 0 on success. On error, a negative value corresponding to fabric errno is returned. Fabric er‐
rno values are defined in rdma/fi_errno.h.
See the discussion below for details handling FI_EAGAIN.
ERRORS
-FI_EAGAIN
Indicates that the underlying provider currently lacks the resources needed to initiate the re‐
quested operation. The reasons for a provider returning FI_EAGAIN are varied. However, common
reasons include insufficient internal buffering or full processing queues.
Insufficient internal buffering is often associated with operations that use FI_INJECT. In such cases,
additional buffering may become available as posted operations complete.
Full processing queues may be a temporary state related to local processing (for example, a large message
is being transferred), or may be the result of flow control. In the latter case, the queues may remain
blocked until additional resources are made available at the remote side of the transfer.
In all cases, the operation may be retried after additional resources become available. It is strongly
recommended that applications check for transmit and receive completions after receiving FI_EAGAIN as a
return value, independent of the operation which failed. This is particularly important in cases where
manual progress is employed, as acknowledgements or flow control messages may need to be processed in or‐
der to resume execution.
SEE ALSO
fi_getinfo(3), fi_endpoint(3), fi_domain(3), fi_cq(3)
AUTHORS
OpenFabrics.
Libfabric Programmer’s Manual 2022-12-11 fi_msg(3)