Provided by: libvm-ec2-perl_1.28-4_all 
NAME
VM::EC2::Staging::Manager - Automate VMs and volumes for moving data in and out of cloud.
SYNOPSIS
use VM::EC2::Staging::Manager;
my $ec2 = VM::EC2->new(-region=>'us-east-1');
my $staging = $ec2->staging_manager(-on_exit => 'stop', # default, stop servers when process exists
-verbose => 1, # default, verbose progress messages
-scan => 1, # default, scan region for existing staging servers and volumes
-image_name => 'ubuntu-precise-12.04', # default server image
-user_name => 'ubuntu', # default server login name
);
# Assuming an EBS image named ami-12345 is located in the US, copy it into
# the South American region, returning the AMI ID in South America
my $new_image = $staging->copy_image('ami-12345','sa-east-1');
# provision a new server, using defaults. Name will be assigned automatically
my $server = $staging->provision_server(-availability_zone => 'us-east-1a');
# retrieve a new server named "my_server", if one exists. If not, it creates one
# using the specified options
my $server = $staging->get_server(-name => 'my_server',
-availability_zone => 'us-east-1a',
-instance_type => 't1.micro');
# open up an ssh session in an xterm
$server->shell;
# run a command over ssh on the server. See VM::EC2::Staging::Server
$server->ssh('whoami');
# run a command over ssh on the server, returning the result as an array of lines or a
# scalar string, similar to backticks (``)
my @password_lines = $server->scmd('cat /etc/passwd');
# run a command on the server and read from it using a filehandle
my $fh = $server->scmd_read('ls -R /usr/lib');
while (<$fh>) { # do something }
# run a command on the server and write to it using a filehandle
my $fh = $server->scmd_write('sudo -s "cat >>/etc/fstab"');
print $fh "/dev/sdf3 /mnt/demo ext3 0 2\n";
close $fh;
# Provision a new volume named "Pictures". Will automatically be mounted to a staging server in
# the specified zone. Server will be created if needed.
my $volume = $staging->provision_volume(-name => 'Pictures',
-fstype => 'ext4',
-availability_zone => 'us-east-1a',
-size => 2) or die $staging->error_str;
# gets an existing volume named "Pictures" if it exists. Otherwise provisions a new volume;
my $volume = $staging->get_volume(-name => 'Pictures',
-fstype => 'ext4',
-availability_zone => 'us-east-1a',
-size => 2) or die $staging->error_str;
# copy contents of local directory /opt/test to remote volume $volume using rsync
# See VM::EC2::Staging::Volume
$volume->put('/opt/test/');
# same thing, but first creating a subdirectory on the remote volume
$volume->put('/opt/test/' => './mirrors/');
# copy contents of remote volume $volume to local directory /tmp/test using rsync
$volume->get('/tmp/test');
# same thing, but from a subdirectory of the remote volume
$volume->get('./mirrors/' => '/tmp/test');
# server to server transfer (works both within and between availability regions)
my $south_america = VM::EC2->new(-region=>'sa-east-1')->staging_manager; # create a staging manager in Sao Paolo
my $volume2 = $south_america->provision_volume(-name => 'Videos',
-availability_zone => 'sa-east-1a',
-size => 2);
$staging->rsync("$volume/mirrors" => "$volume2/us-east");
$staging->stop_all_servers();
$staging->start_all_servers();
$staging->terminate_all_servers();
$staging->force_terminate_all_servers();
DESCRIPTION
VM::EC2::Staging::Manager manages a set of EC2 volumes and servers in a single AWS region. It was
primarily designed to simplify the process of provisioning and populating volumes, but it also provides a
handy set of ssh commands that allow you to run remote commands programmatically.
The manager also allows you to copy EBS-backed AMIs and their attached volumes from one region to
another, something that is otherwise difficult to do.
The main classes are:
VM::EC2::Staging::Manager -- A set of volume and server resources in
a single AWS region.
VM::EC2::Staging::Server -- A staging server running somewhere in the
region. It is a VM::EC2::Instance
extended to provide remote command and
copy facilities.
VM::EC2::Staging::Volume -- A staging disk volume running somewhere in the
region. It is a VM::EC2::Volume
extended to provide remote copy
facilities.
Staging servers can provision volumes, format them, mount them, copy data between local and remote
(virtual) machines, and execute secure shell commands. Staging volumes can mount themselves on servers,
run a variety of filesystem-oriented commands, and invoke commands on the servers to copy data around
locally and remotely.
See VM::EC2::Staging::Server and VM::EC2::Staging::Volume for the full details.
Constructors
The following methods allow you to create new VM::EC2::Staging::Manager instances. Be aware that only one
manager is allowed per EC2 region; attempting to create additional managers in the same region will
return the same one each time.
$manager = $ec2->staging_manager(@args)
This is a simplified way to create a staging manager. First create the EC2 object in the desired region,
and then call its staging_manager() method:
$manager = VM::EC2->new(-region=>'us-west-2')->staging_manager()
The staging_manager() method is only known to VM::EC2 objects if you first "use"
VM::EC2::Staging::Manager.
Required Arguments
None.
Optional Arguments
The optional arguments change the way that the manager creates new servers and volumes.
-on_exit What to do with running servers when the manager goes
out of scope or the script exits. One of 'run',
'stop' (default), or 'terminate'. "run" keeps all
created instances running, so beware!
-architecture Architecture for newly-created server
instances (default "i386"). Can be overridden in calls to get_server()
and provision_server().
-instance_type Type of newly-created servers (default "m1.small"). Can be overridden
in calls to get_server() and provision_server().
-root_type Root type for newly-created servers (default depends
on the -on_exit behavior; "ebs" for exit behavior of
"stop" and "instance-store" for exit behavior of "run"
or "terminate".
-image_name Name or ami ID of the AMI to use for creating the
instances of new servers. Defaults to 'ubuntu-precise-12.04'.
If the image name begins with "ami-", then it is
treated as an AMI ID. Otherwise it is treated as
a name pattern and will be used to search the AMI
name field using the wildcard search "*$name*".
Names work better than AMI ids here, because the
latter change from one region to another. If multiple
matching image candidates are found, then an alpha
sort on the name is used to find the image with the
highest alpha sort value, which happens to work with
Ubuntu images to find the latest release.
-availability_zone Availability zone for newly-created
servers. Default is undef, in which case a random
zone is selected.
-username Username to use for ssh connections. Defaults to
"ubuntu". Note that this user must be able to use
sudo on the instance without providing a password,
or functionality of this module will be limited.
-verbose Integer level of verbosity. Level 1 prints warning
messages. Level 2 (the default) adds informational
messages as well. Level 3 adds verbose debugging
messages. Level 0 suppresses all messages.
-quiet (deprecated) If true, turns off all verbose messages.
-scan Boolean, default true. If true, scans region for
volumes and servers created by earlier manager
instances.
-reuse_key Boolean, default true. If true, creates a single
ssh keypair for each region and reuses it. Note that
the private key is kept on the local computer in the
directory ~/.vm-ec2-staging, and so additional
keypairs may be created if you use this module on
multiple local machines. If this option is false,
then a new keypair will be created for every server
you partition.
-reuse_volumes Boolean, default true. If this flag is true, then
calls to provision_volume() will return existing
volumes if they share the same name as the requested
volume. If no suitable existing volume exists, then
the most recent snapshot of this volume is used to
create it in the specified availability zone. Only
if no volume or snapshot exist will a new volume be
created from scratch.
-dotdir Path to the directory that contains keyfiles and other
stable configuration information for this module.
Defaults to ~/.vm_ec2_staging. You may wish to change
this to, say, a private dropbox directory or an NFS-mount
in order to share keyfiles among machines. Be aware of
the security implications of sharing private key files.
-server_class By default, staging server objects created by the manager
are of class type VM::EC2::Staging::Server. If you create
a custom server subclass, you need to let the manager know
about it by passing the class name to this argument.
-volume_class By default, staging volume objects created by the manager
are of class type VM::EC2::Staging::Volume. If you create
a custom volume subclass, you need to let the manager know
about it by passing the class name to this argument.
$manager = VM::EC2::Staging::Manager(-ec2 => $ec2,@args)
This is a more traditional constructur for the staging manager.
Required Arguments
-ec2 A VM::EC2 object.
Optional Arguments
All of the arguments listed in the description of VM::EC2->staging_manager().
Interzone Copying of AMIs and Snapshots
This library provides convenience methods for copying whole AMIs as well as individual snapshots from one
zone to another. It does this by gathering information about the AMI/snapshot in the source zone,
creating staging servers in the source and target zones, and then copying the volume data from the source
to the target. If an AMI/snapshot does not use a recognized filesystem (e.g. it is part of an LVM or RAID
disk set), then block level copying of the entire device is used. Otherwise, rsync() is used to minimize
data transfer fees.
Note that interzone copying of instance-backed AMIs is not supported. Only EBS-backed images can be
copied in this way.
See also the command-line script migrate-ebs-image.pl that comes with this package.
$new_image_id = $manager->copy_image($source_image,$destination_zone,@register_options)
This method copies the AMI indicated by $source_image from the zone that $manager belongs to, into the
indicated $destination_zone, and returns the AMI ID of the new image in the destination zone.
$source_image may be an AMI ID, or a VM::EC2::Image object.
$destination_zone may be a simple region name, such as "us-west-2", or a VM::EC2::Region object (as
returned by VM::EC2->describe_regions), or a VM::EC2::Staging::Manager object that is associated with the
desired region. The latter form gives you control over the nature of the staging instances created in the
destination zone. For example, if you wish to use 'm1.large' high-I/O instances in both the source and
destination reasons, you would proceed like this:
my $source = VM::EC2->new(-region=>'us-east-1'
)->staging_manager(-instance_type=>'m1.large',
-on_exit =>'terminate');
my $destination = VM::EC2->new(-region=>'us-west-2'
)->staging_manager(-instance_type=>'m1.large',
-on_exit =>'terminate');
my $new_image = $source->copy_image('ami-123456' => $destination);
If present, the named argument list @register_options will be passed to register_image() and used to
override options in the destination image. This can be used to set ephemeral device mappings, which
cannot currently be detected and transferred automatically by copy_image():
$new_image =$source->copy_image('ami-123456' => 'us-west-2',
-description => 'My AMI western style',
-block_devices => '/dev/sde=ephemeral0');
$dest_kernel = $manager->match_kernel($src_kernel,$dest_zone)
Find a kernel in $dest_zone that matches the $src_kernel in the current zone. $dest_zone can be a
VM::EC2::Staging manager object, a region name, or a VM::EC2::Region object.
$new_snapshot_id = $manager->copy_snapshot($source_snapshot,$destination_zone)
This method copies the EBS snapshot indicated by $source_snapshot from the zone that $manager belongs to,
into the indicated $destination_zone, and returns the ID of the new snapshot in the destination zone.
$source_snapshot may be an string ID, or a VM::EC2::Snapshot object.
$destination_zone may be a simple region name, such as "us-west-2", or a VM::EC2::Region object (as
returned by VM::EC2->describe_regions), or a VM::EC2::Staging::Manager object that is associated with the
desired region.
Note that this call uses the Amazon CopySnapshot API call that was introduced in 2012-12-01 and no longer
involves the creation of staging servers in the source and destination regions.
Instance Methods for Managing Staging Servers
These methods allow you to create and interrogate staging servers. They each return one or more
VM::EC2::Staging::Server objects. See VM::EC2::Staging::Server for more information about what you can do
with these servers once they are running.
$server = $manager->provision_server(%options)
Create a new VM::EC2::Staging::Server object according to the passed options, which override the default
options provided by the Manager object.
-name Name for this server, which can be used to retrieve
it later with a call to get_server().
-architecture Architecture for the newly-created server
instances (e.g. "i386"). If not specified, then defaults
to the default_architecture() value. If explicitly
specified as undef, then the architecture of the matching
image will be used.
-instance_type Type of the newly-created server (e.g. "m1.small").
-root_type Root type for the server ("ebs" or "instance-store").
-image_name Name or ami ID of the AMI to use for creating the
instance for the server. If the image name begins with
"ami-", then it is treated as an AMI ID. Otherwise it
is treated as a name pattern and will be used to
search the AMI name field using the wildcard search
"*$name*". Names work better than AMI ids here,
because the latter change from one region to
another. If multiple matching image candidates are
found, then an alpha sort on the name is used to find
the image with the highest alpha sort value, which
happens to work with Ubuntu images to find the latest
release.
-availability_zone Availability zone for the server, or undef to
choose an availability zone randomly.
-username Username to use for ssh connections. Defaults to
"ubuntu". Note that this user must be able to use
sudo on the instance without providing a password,
or functionality of this server will be limited.
In addition, you may use any of the options recognized by VM::EC2->run_instances() (e.g. -block_devices).
$server = $manager->get_server(-name=>$name,%other_options)
$server = $manager->get_server($name)
Return an existing VM::EC2::Staging::Server object having the indicated symbolic name, or create a new
server if one with this name does not already exist. The server's instance characteristics will be
configured according to the options passed to the manager at create time (e.g. -availability_zone,
-instance_type). These options can be overridden by %other_args. See provision_volume() for details.
$server = $manager->get_server_in_zone(-zone=>$availability_zone,%other_options)
$server = $manager->get_server_in_zone($availability_zone)
Return an existing VM::EC2::Staging::Server running in the indicated symbolic name, or create a new
server if one with this name does not already exist. The server's instance characteristics will be
configured according to the options passed to the manager at create time (e.g. -availability_zone,
-instance_type). These options can be overridden by %other_args. See provision_server() for details.
$server = $manager->find_server_by_instance($instance_id)
Given an EC2 instanceId, return the corresponding VM::EC2::Staging::Server, if any.
@servers $manager->servers
Return all registered VM::EC2::Staging::Servers in the zone managed by the manager.
$manager->start_all_servers
Start all VM::EC2::Staging::Servers that are currently in the "stop" state.
$manager->stop_all_servers
Stop all VM::EC2::Staging::Servers that are currently in the "running" state.
$manager->terminate_all_servers
Terminate all VM::EC2::Staging::Servers and unregister them.
$manager->force_terminate_all_servers
Force termination of all VM::EC2::Staging::Servers, even if the internal registration system indicates
that some may be in use by other Manager instances.
$manager->wait_for_servers(@servers)
Wait until all the servers on the list @servers are up and able to accept ssh commands. You may wish to
wrap this in an eval{} and timeout in order to avoid waiting indefinitely.
Instance Methods for Managing Staging Volumes
These methods allow you to create and interrogate staging volumes. They each return one or more
VM::EC2::Staging::Volume objects. See VM::EC2::Staging::Volume for more information about what you can do
with these staging volume objects.
$volume = $manager->provision_volume(%options)
Create and register a new VM::EC2::Staging::Volume and mount it on a staging server in the appropriate
availability zone. A new staging server will be created for this purpose if one does not already exist.
If you provide a symbolic name for the volume and the manager has previously snapshotted a volume by the
same name, then the snapshot will be used to create the volume (this behavior can be suppressed by
passing -reuse=>0). This allows for the following pattern for efficiently updating a snapshotted volume:
my $vol = $manager->provision_volume(-name=>'MyPictures',
-size=>10);
$vol->put('/usr/local/my_pictures/'); # will do an rsync from local directory
$vol->create_snapshot; # write out to a snapshot
$vol->delete;
You may also explicitly specify a volumeId or snapshotId. The former allows you to place an existing
volume under management of VM::EC2::Staging::Manager and returns a corresponding staging volume object.
The latter creates the staging volume from the indicated snapshot, irregardless of whether the snapshot
was created by the staging manager at an earlier time.
Newly-created staging volumes are automatically formatted as ext4 filesystems and mounted on the staging
server under /mnt/Staging/$name, where $name is the staging volume's symbolic name. The filesystem type
and the mountpoint can be modified with the -fstype and -mount arguments, respectively. In addition, you
may specify an -fstype of "raw", in which case the volume will be attached to a staging server (creating
the server first if necessary) but not formatted or mounted. This is useful when creating multi-volume
RAID or LVM setups.
Options:
-name Name of the staging volume. A fatal error issues if a staging
volume by this name already exists (use get_volume() to
avoid this). If no name is provided, then a random
unique one is chosen for you.
-availability_zone
Availability zone in which to create this
volume. If none is specified, then a zone is chosen that
reuses an existing staging server, if any.
-size Size of the desired volume, in GB.
-fstype Filesystem type for the volume, ext4 by default. Supported
types are ext2, ext3, ext4, xfs, reiserfs, jfs, hfs,
ntfs, vfat, msdos, and raw.
-mount Mount point for this volume on the staging server (e.g. /opt/bin).
Use with care, as there are no checks to prevent you from mounting
two staging volumes on top of each other or mounting over essential
operating system paths.
-label Volume label. Only applies to filesystems that support labels
(all except hfs, vfat, msdos and raw).
-volume_id Create the staging volume from an existing EBS volume with
the specified ID. Most other options are ignored in this
case.
-snapshot_id
Create the staging volume from an existing EBS
snapshot. If a size is specified that is larger than the
snapshot, then the volume and its filesystem will be
automatically extended (this only works for ext volumes
at the moment). Shrinking of volumes is not currently
supported.
-reuse If true, then the most recent snapshot created from a staging
volume of the same name is used to create the
volume. This is the default. Pass 0 to disable this
behavior.
The -reuse argument is intended to support the following use case in which you wish to rsync a directory
on a host system somewhere to an EBS snapshot, without maintaining a live server and volume on EC2:
my $volume = $manager->provision_volume(-name=>'backup_1',
-reuse => 1,
-fstype => 'ext3',
-size => 10);
$volume->put('fred@gw.harvard.edu:my_music');
$volume->create_snapshot('Music Backup '.localtime);
$volume->delete;
The next time this script is run, the "backup_1" volume will be recreated from the most recent snapshot,
minimizing copying. A new snapshot is created, and the staging volume is deleted.
$volume = $manager->get_volume(-name=>$name,%other_options)
$volume = $manager->get_volume($name)
Return an existing VM::EC2::Staging::Volume object with the indicated symbolic name, or else create a new
volume if one with this name does not already exist. The volume's characteristics will be configured
according to the options in %other_args. See provision_volume() for details. If called with no arguments,
this method returns Volume object with default characteristics and a randomly-assigned name.
$result = $manager->rsync($src1,$src2,$src3...,$dest)
This method provides remote synchronization (rsync) file-level copying between one or more source
locations and a destination location via an ssh tunnel. Copying among arbitrary combinations of local and
remote filesystems is supported, with the caveat that the remote filesystems must be contained on volumes
and servers managed by this module (see below for a workaround).
You may provide two or more directory paths. The last path will be treated as the copy destination, and
the source paths will be treated as copy sources. All copying is performed using the -avz options, which
activates recursive directory copying in which ownership, modification times and permissions are
preserved, and compresses the data to reduce network usage. Verbosity is set so that the names of copied
files are printed to STDERR. If you do not wish this, then use call the manager's quiet() method with a
true value.
Source paths can be formatted in one of several ways:
/absolute/path
Copy the contents of the directory /absolute/path located on the
local machine to the destination. This will create a
subdirectory named "path" on the destination disk. Add a slash
to the end of the path (i.e. "/absolute/path/") in order to
avoid creating this subdirectory on the destination disk.
./relative/path
Relative paths work the way you expect, and depend on the current
working directory. The terminating slash rule applies.
$staging_volume
Pass a VM::EC2::Staging::Volume to copy the contents of the
volume to the destination disk starting at the root of the
volume. Note that you do *not* need to have any knowledge of the
mount point for this volume in order to copy its contents.
$staging_volume:/absolute/path
$staging_volume:absolute/path
$staging_volume/absolute/path
All these syntaxes accomplish the same thing, which is to
copy a subdirectory of a staging volume to the destination disk.
The root of the volume is its top level, regardless of where it
is mounted on the staging server. Because of string
interpolation magic, you can enclose staging volume object names
in quotes in order to construct the path, as in
"$picture_volume:/family/vacations/". As in local paths, a
terminating slash indicates that the contents of the last
directory in the path are to be copied without creating the
enclosing directory on the desetination. Note that you do *not*
need to have any knowledge of the mount point for this volume in
order to copy its contents.
$staging_server:/absolute/path
Pass a staging server object and absolute path to copy the contents
of this path to the destination disk. Because of string interpolation
you can include server objects in quotes: "$my_server:/opt"
$staging_server:relative/path
This form will copy data from paths relative to the remote user's home
directory on the staging server. Typically not very useful, but supported.
The same syntax is supported for destination paths, except that it makes no difference whether a path has
a trailing slash or not.
As with the rsync command, if you proceed a path with a single colon (:/my/path), it is a short hand to
use the previous server/volume/host in the source list.
When specifying multiple source directories, all source directories must reside on the same local or
remote machine. This is legal:
$manager->rsync("$picture_volume:/family/vacations",
"$picture_volume:/family/picnics"
=> "$backup_volume:/recent_backups");
This is not:
$manager->rsync("$picture_volume:/family/vacations",
"$audio_volume:/beethoven"
=> "$backup_volume:/recent_backups");
When specifying multiple sources, you may give the volume or server once for the first source and then
start additional source paths with a ":" to indicate the same volume or server is to be used:
$manager->rsync("$picture_volume:/family/vacations",
":/family/picnics"
=> "$backup_volume:/recent_backups");
When copying to/from the local machine, the rsync process will run as the user that the script was
launched by. However, on remote servers managed by the staging manager, the rsync process will run as
superuser.
The rsync() method will also accept regular remote DNS names and IP addresses, optionally preceded by a
username:
$manager->rsync("$picture_volume:/family/vacations" => 'fred@gw.harvard.edu:/tmp')
When called in this way, the method does what it can to avoid prompting for a password or passphrase on
the non-managed host (gw.harvard.edu in the above example). This includes turning off strict host
checking and forwarding the user agent information from the local machine.
$result = $manager->rsync(\@options,$src1,$src2,$src3...,$dest)
This is a variant of the rsync command in which extra options can be passed to rsync by providing an
array reference as the first argument. For example:
$manager->rsync(['--exclude' => '*~'],
'/usr/local/backups',
"$my_server:/usr/local");
$manager->dd($source_vol=>$dest_vol)
This method performs block-level copying of the contents of $source_vol to $dest_vol by using dd over an
SSH tunnel, where both source and destination volumes are VM::EC2::Staging::Volume objects. The volumes
must be attached to a server but not mounted. Everything in the volume, including its partition table, is
copied, allowing you to make an exact image of a disk.
The volumes do not actually need to reside on this server, but can be attached to any staging server in
the zone.
$volume = $manager->find_volume_by_volid($volume_id)
Given an EC2 volumeId, return the corresponding VM::EC2::Staging::Volume, if any.
$volume = $manager->find_volume_by_name($name)
Given a staging name (assigned at volume creation time), return the corresponding
VM::EC2::Staging::Volume, if any.
@volumes = $manager->volumes
Return all VM::EC2::Staging::Volumes managed in this zone.
Instance Methods for Accessing Configuration Options
This section documents accessor methods that allow you to examine or change configuration options that
were set at create time. Called with an argument, the accessor changes the option and returns the
option's previous value. Called without an argument, the accessor returns the option's current value.
$on_exit = $manager->on_exit([$new_behavior])
Get or set the "on_exit" option, which specifies what to do with existing staging servers when the
staging manager is destroyed. Valid values are "terminate", "stop" and "run".
$reuse_key = $manager->reuse_key([$boolean])
Get or set the "reuse_key" option, which if true uses the same internally-generated ssh keypair for all
running instances. If false, then a new keypair will be created for each staging server. The keypair will
be destroyed automatically when the staging server terminates (but only if the staging manager initiates
the termination itself).
$username = $manager->username([$new_username])
Get or set the username used to log into staging servers.
$architecture = $manager->architecture([$new_architecture])
Get or set the architecture (i386, x86_64) to use for launching new staging servers.
$root_type = $manager->root_type([$new_type])
Get or set the instance root type for new staging servers ("instance-store", "ebs").
$instance_type = $manager->instance_type([$new_type])
Get or set the instance type to use for new staging servers (e.g. "t1.micro"). I recommend that you use
"m1.small" (the default) or larger instance types because of the extremely slow I/O of the micro
instance. In addition, micro instances running Ubuntu have a known bug that prevents them from unmounting
and remounting EBS volumes repeatedly on the same block device. This can lead to hangs when the staging
manager tries to create volumes.
$reuse_volumes = $manager->reuse_volumes([$new_boolean])
This gets or sets the "reuse_volumes" option, which if true causes the provision_volumes() call to create
staging volumes from existing EBS volumes and snapshots that share the same staging manager symbolic
name. See the discussion under VM::EC2->staging_manager(), and
VM::EC2::Staging::Manager->provision_volume().
$name = $manager->image_name([$new_name])
This gets or sets the "image_name" option, which is the AMI ID or AMI name to use when creating new
staging servers. Names beginning with "ami-" are treated as AMI IDs, and everything else is treated as a
pattern match on the AMI name.
$zone = $manager->availability_zone([$new_zone])
Get or set the default availability zone to use when creating new servers and volumes. An undef value
allows the staging manager to choose the zone in a way that minimizes resources.
$class_name = $manager->volume_class([$new_class])
Get or set the name of the perl package that implements staging volumes, VM::EC2::Staging::Volume by
default. Staging volumes created by the manager will have this class type.
$class_name = $manager->server_class([$new_class])
Get or set the name of the perl package that implements staging servers, VM::EC2::Staging::Server by
default. Staging servers created by the manager will have this class type.
$boolean = $manager->scan([$boolean])
Get or set the "scan" flag, which if true will cause the zone to be scanned quickly for existing managed
servers and volumes when the manager is first created.
$path = $manager->dot_directory([$new_directory])
Get or set the dot directory which holds private key files.
Internal Methods
This section documents internal methods that are not normally called by end-user scripts but may be
useful in subclasses. In addition, there are a number of undocumented internal methods that begin with
the "_" character. Explore the source code to learn about these.
$ok = $manager->environment_ok
This performs a check on the environment in which the module is running. For this module to work
properly, the ssh, rsync and dd programs must be found in the PATH. If all three programs are found, then
this method returns true.
This method can be called as an instance method or class method.
$name = $manager->default_verbosity
Returns the default verbosity level (2: warning+informational messages). This is overridden using
-verbose at create time.
$name = $manager->default_exit_behavior
Return the default exit behavior ("stop") when the manager terminates. Intended to be overridden in
subclasses.
$name = $manager->default_image_name
Return the default image name ('ubuntu-precise-12.04') for use in creating new instances. Intended to be
overridden in subclasses.
$name = $manager->default_user_name
Return the default user name ('ubuntu') for use in creating new instances. Intended to be overridden in
subclasses.
$name = $manager->default_architecture
Return the default instance architecture ('i386') for use in creating new instances. Intended to be
overridden in subclasses.
$name = $manager->default_root_type
Return the default instance root type ('instance-store') for use in creating new instances. Intended to
be overridden in subclasses. Note that this value is ignored if the exit behavior is "stop", in which
case an ebs-backed instance will be used. Also, the m1.micro instance type does not come in an instance-
store form, so ebs will be used in this case as well.
$name = $manager->default_instance_type
Return the default instance type ('m1.small') for use in creating new instances. Intended to be
overridden in subclasses. We default to m1.small rather than a micro instance because the I/O in m1.small
is far faster than in t1.micro.
$name = $manager->default_reuse_keys
Return the default value of the -reuse_keys argument ('true'). This value allows the manager to create an
ssh keypair once, and use the same one for all servers it creates over time. If false, then a new keypair
is created for each server and then discarded when the server terminates.
$name = $manager->default_reuse_volumes
Return the default value of the -reuse_volumes argument ('true'). This value instructs the manager to use
the symbolic name of the volume to return an existing volume whenever a request is made to provision a
new one of the same name.
$path = $manager->default_dot_directory_path
Return the default value of the -dotdir argument ("$ENV{HOME}/.vm-ec2-staging"). This value instructs the
manager to use the symbolic name of the volume to return an existing volume whenever a request is made to
provision a new one of the same name.
$class_name = $manager->default_volume_class
Return the class name for staging volumes created by the manager, VM::EC2::Staging::Volume by default. If
you wish a subclass of VM::EC2::Staging::Manager to create a different type of volume, override this
method.
$class_name = $manager->default_server_class
Return the class name for staging servers created by the manager, VM::EC2::Staging::Server by default. If
you wish a subclass of VM::EC2::Staging::Manager to create a different type of volume, override this
method.
$server = $manager->register_server($server)
Register a VM::EC2::Staging::Server object. Usually called internally.
$manager->unregister_server($server)
Forget about the existence of VM::EC2::Staging::Server. Usually called internally.
$manager->register_volume($volume)
Register a VM::EC2::Staging::Volume object. Usually called internally.
$manager->unregister_volume($volume)
Forget about a VM::EC2::Staging::Volume object. Usually called internally.
$pid = $manager->pid([$new_pid])
Get or set the process ID of the script that is running the manager. This is used internally to detect
the case in which the script has forked, in which case we do not want to invoke the manager class's
destructor in the child process (because it may stop or terminate servers still in use by the parent
process).
$path = $manager->dotdir([$new_dotdir])
Low-level version of dot_directory(), differing only in the fact that dot_directory will automatically
create the path, including subdirectories.
$manager->scan_region
Synchronize internal list of managed servers and volumes with the EC2 region. Called automatically during
new() and needed only if servers & volumes are changed from outside the module while it is running.
$group = $manager->security_group
Returns or creates a security group with the permissions needed used to manage staging servers. Usually
called internally.
$keypair = $manager->keypair
Returns or creates the ssh keypair used internally by the manager to to access staging servers. Usually
called internally.
$name = $manager->new_volume_name
Returns a new random name for volumes provisioned without a -name argument. Currently names are in of the
format "volume-12345678", where the numeric part are 8 random hex digits. Although no attempt is made to
prevent naming collisions, the large number of possible names makes this unlikely.
$name = $manager->new_server_name
Returns a new random name for server provisioned without a -name argument. Currently names are in of the
format "server-12345678", where the numeric part are 8 random hex digits. Although no attempt is made to
prevent naming collisions, the large number of possible names makes this unlikely.
$description = $manager->volume_description($volume)
This method is called to assign a description to newly-created volumes. The current format is "Staging
volume for Foo created by VM::EC2::Staging::Manager", where Foo is the volume's symbolic name.
$manager->debug("Debugging message\n")
$manager->info("Informational message\n")
$manager->warn("Warning message\n")
Prints an informational message to standard error if current verbosity() level allows.
$verbosity = $manager->verbosity([$new_value])
The verbosity() method get/sets a flag that sets the level of informational messages.
SEE ALSO
VM::EC2 VM::EC2::Staging::Server VM::EC2::Staging::Volume migrate-ebs-image.pl
AUTHOR
Lincoln Stein <lincoln.stein@gmail.com>.
Copyright (c) 2012 Ontario Institute for Cancer Research
This package and its accompanying libraries is free software; you can redistribute it and/or modify it
under the terms of the GPL (either version 1, or at your option, any later version) or the Artistic
License 2.0. Refer to LICENSE for the full license text. In addition, please see DISCLAIMER.txt for
disclaimers of warranty.
perl v5.36.0 2022-10-14 VM::EC2::Staging::Manager(3pm)