Provided by: tk8.6-doc_8.6.14-1build1_all 
NAME
Tk_Alloc3DBorderFromObj, Tk_Get3DBorder, Tk_Get3DBorderFromObj, Tk_Draw3DRectangle, Tk_Fill3DRectangle,
Tk_Draw3DPolygon, Tk_Fill3DPolygon, Tk_3DVerticalBevel, Tk_3DHorizontalBevel, Tk_SetBackgroundFromBorder,
Tk_NameOf3DBorder, Tk_3DBorderColor, Tk_3DBorderGC, Tk_Free3DBorderFromObj, Tk_Free3DBorder - draw
borders with three-dimensional appearance
SYNOPSIS
#include <tk.h>
Tk_3DBorder
Tk_Alloc3DBorderFromObj(interp, tkwin, objPtr)
Tk_3DBorder
Tk_Get3DBorder(interp, tkwin, colorName)
Tk_3DBorder
Tk_Get3DBorderFromObj(tkwin, objPtr)
void
Tk_Draw3DRectangle(tkwin, drawable, border, x, y, width, height, borderWidth, relief)
void
Tk_Fill3DRectangle(tkwin, drawable, border, x, y, width, height, borderWidth, relief)
void
Tk_Draw3DPolygon(tkwin, drawable, border, pointPtr, numPoints, polyBorderWidth, leftRelief)
void
Tk_Fill3DPolygon(tkwin, drawable, border, pointPtr, numPoints, polyBorderWidth, leftRelief)
void
Tk_3DVerticalBevel(tkwin, drawable, border, x, y, width, height, leftBevel, relief)
void
Tk_3DHorizontalBevel(tkwin, drawable, border, x, y, width, height, leftIn, rightIn, topBevel, relief)
void
Tk_SetBackgroundFromBorder(tkwin, border)
const char *
Tk_NameOf3DBorder(border)
XColor *
Tk_3DBorderColor(border)
GC *
Tk_3DBorderGC(tkwin, border, which)
Tk_Free3DBorderFromObj(tkwin, objPtr)
Tk_Free3DBorder(border)
ARGUMENTS
Tcl_Interp *interp (in) Interpreter to use for error reporting.
Tk_Window tkwin (in) Token for window (for all procedures except Tk_Get3DBorder, must be
the window for which the border was allocated).
Tcl_Obj *objPtr (in) Pointer to value whose value describes color corresponding to
background (flat areas). Illuminated edges will be brighter than
this and shadowed edges will be darker than this.
char *colorName (in) Same as objPtr except value is supplied as a string rather than a
value.
Drawable drawable (in) X token for window or pixmap; indicates where graphics are to be
drawn. Must either be the X window for tkwin or a pixmap with the
same screen and depth as tkwin.
Tk_3DBorder border (in) Token for border previously allocated in call to Tk_Get3DBorder.
int x (in) X-coordinate of upper-left corner of rectangle describing border or
bevel, in pixels.
int y (in) Y-coordinate of upper-left corner of rectangle describing border or
bevel, in pixels.
int width (in) Width of rectangle describing border or bevel, in pixels.
int height (in) Height of rectangle describing border or bevel, in pixels.
int borderWidth (in) Width of border in pixels. Positive means border is inside
rectangle given by x, y, width, height, negative means border is
outside rectangle.
int relief (in) Indicates 3-D position of interior of value relative to exterior;
should be TK_RELIEF_RAISED, TK_RELIEF_SUNKEN, TK_RELIEF_GROOVE,
TK_RELIEF_SOLID, or TK_RELIEF_RIDGE (may also be TK_RELIEF_FLAT for
Tk_Fill3DRectangle).
XPoint *pointPtr (in) Pointer to array of points describing the set of vertices in a
polygon. The polygon need not be closed (it will be closed
automatically if it is not).
int numPoints (in) Number of points at *pointPtr.
int polyBorderWidth (in) Width of border in pixels. If positive, border is drawn to left of
trajectory given by pointPtr; if negative, border is drawn to
right of trajectory. If leftRelief is TK_RELIEF_GROOVE or
TK_RELIEF_RIDGE then the border is centered on the trajectory.
int leftRelief (in) Height of left side of polygon's path relative to right.
TK_RELIEF_RAISED means left side should appear higher and
TK_RELIEF_SUNKEN means right side should appear higher;
TK_RELIEF_GROOVE and TK_RELIEF_RIDGE mean the obvious things. For
Tk_Fill3DPolygon, TK_RELIEF_FLAT may also be specified to indicate
no difference in height.
int leftBevel (in) Non-zero means this bevel forms the left side of the value; zero
means it forms the right side.
int leftIn (in) Non-zero means that the left edge of the horizontal bevel angles
in, so that the bottom of the edge is farther to the right than the
top. Zero means the edge angles out, so that the bottom is farther
to the left than the top.
int rightIn (in) Non-zero means that the right edge of the horizontal bevel angles
in, so that the bottom of the edge is farther to the left than the
top. Zero means the edge angles out, so that the bottom is farther
to the right than the top.
int topBevel (in) Non-zero means this bevel forms the top side of the value; zero
means it forms the bottom side.
int which (in) Specifies which of the border's graphics contexts is desired. Must
be TK_3D_FLAT_GC, TK_3D_LIGHT_GC, or TK_3D_DARK_GC.
________________________________________________________________________________________________________________
DESCRIPTION
These procedures provide facilities for drawing window borders in a way that produces a three-dimensional
appearance. Tk_Alloc3DBorderFromObj allocates colors and Pixmaps needed to draw a border in the window
given by the tkwin argument. The value of objPtr is a standard Tk color name that determines the border
colors. The color indicated by objPtr will not actually be used in the border; it indicates the
background color for the window (i.e. a color for flat surfaces). The illuminated portions of the border
will appear brighter than indicated by objPtr, and the shadowed portions of the border will appear darker
than objPtr.
Tk_Alloc3DBorderFromObj returns a token that may be used in later calls to Tk_Draw3DRectangle. If an
error occurs in allocating information for the border (e.g. a bogus color name was given) then NULL is
returned and an error message is left as the result of interpreter interp. If it returns successfully,
Tk_Alloc3DBorderFromObj caches information about the return value in objPtr, which speeds up future calls
to Tk_Alloc3DBorderFromObj with the same objPtr and tkwin.
Tk_Get3DBorder is identical to Tk_Alloc3DBorderFromObj except that the color is specified with a string
instead of a value. This prevents Tk_Get3DBorder from caching the return value, so Tk_Get3DBorder is
less efficient than Tk_Alloc3DBorderFromObj.
Tk_Get3DBorderFromObj returns the token for an existing border, given the window and color name used to
create the border. Tk_Get3DBorderFromObj does not actually create the border; it must already have been
created with a previous call to Tk_Alloc3DBorderFromObj or Tk_Get3DBorder. The return value is cached in
objPtr, which speeds up future calls to Tk_Get3DBorderFromObj with the same objPtr and tkwin.
Once a border structure has been created, Tk_Draw3DRectangle may be invoked to draw the border. The
tkwin argument specifies the window for which the border was allocated, and drawable specifies a window
or pixmap in which the border is to be drawn. Drawable need not refer to the same window as tkwin, but
it must refer to a compatible pixmap or window: one associated with the same screen and with the same
depth as tkwin. The x, y, width, and height arguments define the bounding box of the border region
within drawable (usually x and y are zero and width and height are the dimensions of the window), and
borderWidth specifies the number of pixels actually occupied by the border. The relief argument
indicates which of several three-dimensional effects is desired: TK_RELIEF_RAISED means that the interior
of the rectangle should appear raised relative to the exterior of the rectangle, and TK_RELIEF_SUNKEN
means that the interior should appear depressed. TK_RELIEF_GROOVE and TK_RELIEF_RIDGE mean that there
should appear to be a groove or ridge around the exterior of the rectangle.
Tk_Fill3DRectangle is somewhat like Tk_Draw3DRectangle except that it first fills the rectangular area
with the background color (one corresponding to the color used to create border). Then it calls
Tk_Draw3DRectangle to draw a border just inside the outer edge of the rectangular area. The argument
relief indicates the desired effect (TK_RELIEF_FLAT means no border should be drawn; all that happens is
to fill the rectangle with the background color).
The procedure Tk_Draw3DPolygon may be used to draw more complex shapes with a three-dimensional
appearance. The pointPtr and numPoints arguments define a trajectory, polyBorderWidth indicates how wide
the border should be (and on which side of the trajectory to draw it), and leftRelief indicates which
side of the trajectory should appear raised. Tk_Draw3DPolygon draws a border around the given trajectory
using the colors from border to produce a three-dimensional appearance. If the trajectory is non-self-
intersecting, the appearance will be a raised or sunken polygon shape. The trajectory may be self-
intersecting, although it's not clear how useful this is.
Tk_Fill3DPolygon is to Tk_Draw3DPolygon what Tk_Fill3DRectangle is to Tk_Draw3DRectangle: it fills the
polygonal area with the background color from border, then calls Tk_Draw3DPolygon to draw a border around
the area (unless leftRelief is TK_RELIEF_FLAT; in this case no border is drawn).
The procedures Tk_3DVerticalBevel and Tk_3DHorizontalBevel provide lower-level drawing primitives that
are used by procedures such as Tk_Draw3DRectangle. These procedures are also useful in their own right
for drawing rectilinear border shapes. Tk_3DVerticalBevel draws a vertical beveled edge, such as the
left or right side of a rectangle, and Tk_3DHorizontalBevel draws a horizontal beveled edge, such as the
top or bottom of a rectangle. Each procedure takes x, y, width, and height arguments that describe the
rectangular area of the beveled edge (e.g., width is the border width for Tk_3DVerticalBevel). The
leftBorder and topBorder arguments indicate the position of the border relative to the “inside” of the
value, and relief indicates the relief of the inside of the value relative to the outside.
Tk_3DVerticalBevel just draws a rectangular region. Tk_3DHorizontalBevel draws a trapezoidal region to
generate mitered corners; it should be called after Tk_3DVerticalBevel (otherwise Tk_3DVerticalBevel
will overwrite the mitering in the corner). The leftIn and rightIn arguments to Tk_3DHorizontalBevel
describe the mitering at the corners; a value of 1 means that the bottom edge of the trapezoid will be
shorter than the top, 0 means it will be longer. For example, to draw a rectangular border the top bevel
should be drawn with 1 for both leftIn and rightIn, and the bottom bevel should be drawn with 0 for both
arguments.
The procedure Tk_SetBackgroundFromBorder will modify the background pixel and/or pixmap of tkwin to
produce a result compatible with border. For color displays, the resulting background will just be the
color specified when border was created; for monochrome displays, the resulting background will be a
light stipple pattern, in order to distinguish the background from the illuminated portion of the border.
Given a token for a border, the procedure Tk_NameOf3DBorder will return the color name that was used to
create the border.
The procedure Tk_3DBorderColor returns the XColor structure that will be used for flat surfaces drawn for
its border argument by procedures like Tk_Fill3DRectangle. The return value corresponds to the color
name that was used to create the border. The XColor, and its associated pixel value, will remain
allocated as long as border exists.
The procedure Tk_3DBorderGC returns one of the X graphics contexts that are used to draw the border. The
argument which selects which one of the three possible GC's: TK_3D_FLAT_GC returns the context used for
flat surfaces, TK_3D_LIGHT_GC returns the context for light shadows, and TK_3D_DARK_GC returns the
context for dark shadows.
When a border is no longer needed, Tk_Free3DBorderFromObj or Tk_Free3DBorder should be called to release
the resources associated with it. For Tk_Free3DBorderFromObj the border to release is specified with the
window and color name used to create the border; for Tk_Free3DBorder the border to release is specified
with the Tk_3DBorder token for the border. There should be exactly one call to Tk_Free3DBorderFromObj or
Tk_Free3DBorder for each call to Tk_Alloc3DBorderFromObj or Tk_Get3DBorder.
KEYWORDS
3D, background, border, color, depressed, illumination, value, polygon, raised, shadow, three-dimensional
effect
Tk 8.1 Tk_Alloc3DBorderFromObj(3tk)