Ubuntu Manpage: Sendmail::PMilter - Perl binding of Sendmail Milter protocol

Provided by: libsendmail-pmilter-perl_1.00-1.2_all

NAME

       Sendmail::PMilter - Perl binding of Sendmail Milter protocol

SYNOPSIS

           use Sendmail::PMilter;

           my $milter = new Sendmail::PMilter;

           $milter->auto_setconn(NAME);
           $milter->register(NAME, { CALLBACKS }, FLAGS);
           $milter->main();

DESCRIPTION

       Sendmail::PMilter is a mail filtering API implementing the Sendmail milter protocol in pure Perl.  This
       allows Sendmail servers (and perhaps other MTAs implementing milter) to filter and modify mail in transit
       during the SMTP connection, all in Perl.

       It should be noted that PMilter 0.90 and later is NOT compatible with scripts written for PMilter 0.5 and
       earlier.  The API has been reworked significantly, and the enhanced APIs and rule logic provided by
       PMilter 0.5 and earlier has been factored out for inclusion in a separate package to be called
       Mail::Milter.

METHODS

get_max_interpreters()
Returns the maximum number of interpreters passed to "main()". This is only useful when called from
within the dispatcher, as it is not set before "main()" is called.

get_max_requests()
Returns the maximum number of requests per interpreter passed to "main()". This is only useful when
called from within the dispatcher, as it is not set before "main()" is called.

main([MAXCHILDREN[, MAXREQ]])
This is the last method called in the main block of a milter program. If successful, this call never
returns; the protocol engine is launched and begins accepting connections.

MAXCHILDREN (default 0, meaning unlimited) specifies the maximum number of connections that may be
serviced simultaneously. If a connection arrives with the number of active connections above this
limit, the milter will immediately return a temporary failure condition and close the connection.

MAXREQ (default 0, meaning unlimited) is the maximum number of requests that a child may service
before being recycled. It is not guaranteed that the interpreter will service this many requests,
only that it will not go over the limit.

Any callback which "die"s will have its output sent to "warn", followed by a clean shutdown of the
milter connection. To catch any warnings generated by the callbacks, and any error messages caused
by a "die", set $SIG{__WARN__} to a user-defined subroutine. (See perlvar.)

NAME is the name of the milter. For compatibility with the official Sendmail::Milter distribution,
this should be the same name as passed to auto_getconn() or auto_setconn(), but this PMilter
implementation does not enforce this.

CALLBACKS is a hash reference containing one or more callback subroutines. If a callback is not
named in this hashref, the caller's package will be searched for subroutines named
"CALLBACK_callback", where CALLBACK is the name of the callback function.

FLAGS, if specified, is a bitmask of message modification actions (a bitwise OR of the SMFIF_*
constants, or SMFI_CURR_ACTS to ask for all capabilities) that are requested by the callback object
for use during message processing. If any bit is not set in this mask, its corresponding action will
not be allowed during message processing.

"register()" must be called successfully exactly once. If called a second time, the previously
registered callbacks will be erased.

Returns a true value on success, undef on failure.

setconn(DESC)
Sets up the server socket with connection descriptor DESC. This is identical to the descriptor
syntax used by the "X" milter configuration lines in sendmail.cf (if using Sendmail). This should be
one of the following:

local:PATH
A local ("UNIX") socket on the filesystem, named PATH. This has some smarts that will auto-delete
the pathname if it seems that the milter is not currently running (but this currently contains a
race condition that may not be fixable; at worst, there could be two milters running with one never
receiving connections).

inet:PORT[@HOST]
An IPv4 socket, bound to address HOST (default INADDR_ANY), on port PORT. It is not recommended to
open milter engines to the world, so the @HOST part should be specified.

inet6:PORT[@HOST]
An IPv6 socket, bound to address HOST (default INADDR_ANY), on port PORT. This requires IPv6
support and the Perl INET6 package to be installed. It is not recommended to open milter engines
to the world, so the @HOST part should be specified.

Returns a true value on success, undef on failure.

set_dispatcher(CODEREF)
Sets the dispatcher used to accept socket connections and hand them off to the protocol engine. This
allows pluggable resource allocation so that the milter script may use fork, threads, or any other
such means of handling milter connections. See "DISPATCHERS" below for more information.

The subroutine (code) reference will be called by "main()" when the listening socket object is
prepared and ready to accept connections. It will be passed the arguments:

MILTER, LSOCKET, HANDLER

MILTER is the milter object currently running. LSOCKET is a listening socket (an instance of
"IO::Socket"), upon which "accept()" should be called. HANDLER is a subroutine reference which
should be called, passing the socket object returned by "LSOCKET->accept()".

Note that the dispatcher may also be set from one of the off-the-shelf dispatchers noted in this
document by setting the PMILTER_DISPATCHER environment variable. See "DISPATCHERS", below.

set_listen(BACKLOG)
Set the socket listen backlog to BACKLOG. The default is 5 connections if not set explicitly by this
method. Only useful before calling "main()".

set_socket(SOCKET)
Rather than calling "setconn()", this method may be called explicitly to set the "IO::Socket"
instance used to accept inbound connections.

SENDMAIL-SPECIFIC METHODS

       The  following  methods  are  only  useful  if Sendmail is the MTA connecting to this milter.  Other MTAs
       likely don't use Sendmail's configuration file, so these methods would not be useful with them.

       auto_getconn(NAME[, CONFIG])
           Returns the connection descriptor for milter NAME in  Sendmail  configuration  file  CONFIG  (default
           "/etc/mail/sendmail.cf"  or  whatever  was  set  by "set_sendmail_cf()").  This can then be passed to
           setconn(), below.

           Returns a true value on success, undef on failure.

       auto_setconn(NAME[, CONFIG])
           Creates the server connection socket for milter NAME in Sendmail configuration file CONFIG.

           Essentially, does:

               $milter->setconn($milter->auto_getconn(NAME, CONFIG))

           Returns a true value on success, undef on failure.

       get_sendmail_cf()
           Returns the pathname of the Sendmail configuration file set by "set_sendmail_cf()", else the  default
           of "/etc/mail/sendmail.cf".

       get_sendmail_class(CLASS[, CONFIG])
           Returns  a  list  containing  all members of the Sendmail class CLASS, in Sendmail configuration file
           CONFIG (default "/etc/mail/sendmail.cf" or whatever is set by "set_sendmail_cf()").   Typically  this
           is used to look up the entries in class "w", the local hostnames class.

       set_sendmail_cf(FILENAME)
           Set  the  default  filename  used  by  "auto_getconn",  "auto_setconn",  and "sendmail_class" to find
           Sendmail-specific configuration data.   If  not  explicitly  set  by  this  method,  it  defaults  to
           "/etc/mail/sendmail.cf".

DISPATCHERS

Milter requests may be dispatched to the protocol handler in a pluggable manner (see the description for
the "set_dispatcher()" method above). "Sendmail::PMilter" offers some off-the-shelf dispatchers that use
different methods of resource allocation.

Each of these is referenced as a non-object function, and return a value that may be passed directly to
"set_dispatcher()".

Sendmail::PMilter::ithread_dispatcher()
(environment) PMILTER_DISPATCHER=ithread
The "ithread" dispatcher spins up a new thread upon each connection to the milter socket. This
provides a thread-based model that may be more resource efficient than the similar "postfork"
dispatcher. This requires that the Perl interpreter be compiled with "-Duseithreads", and uses the
"threads" module (available on Perl 5.8 or later only).

Sendmail::PMilter::prefork_dispatcher([PARAMS])
(environment) PMILTER_DISPATCHER=prefork
The "prefork" dispatcher forks the main Perl process before accepting connections, and uses the main
process to monitor the children. This should be appropriate for steady traffic flow sites. Note
that if MAXINTERP is not set in the call to "main()" or in PARAMS, an internal default of 10
processes will be used; similarly, if MAXREQ is not set, 100 requests will be served per child.

Currently the child process pool is fixed-size: discarded children will be immediately replaced.
This may change to use a dynamic sizing method in the future, more like the Apache webserver's fork-
based model.

PARAMS, if specified, is a hash of key-value pairs defining parameters for the dispatcher. The
available parameters that may be set are:

child_init
subroutine reference that will be called after each child process is forked. It will be passed the
"MILTER" object.

child_exit
subroutine reference that will be called just before each child process terminates. It will be
passed the "MILTER" object.

max_children
Maximum number of child processes active at any time. Equivalent to the MAXINTERP option to main()
-- if not set in the main() call, this value will be used.

max_requests_per_child
Maximum number of requests a child process may service before being recycled. Equivalent to the
MAXREQ option to main() -- if not set in the main() call, this value will be used.

Sendmail::PMilter::postfork_dispatcher()
(environment) PMILTER_DISPATCHER=postfork
In this release, this is the default dispatcher for PMilter if no explicit dispatcher is set.

The "postfork" dispatcher forks the main Perl process upon each connection to the milter socket.
This is adequate for machines that get bursty but otherwise mostly idle mail traffic, as the idle-
time resource consumption is very low.

Sendmail::PMilter::sequential_dispatcher()
(environment) PMILTER_DISPATCHER=sequential
The "sequential" dispatcher forces one request to be served at a time, making other requests wait on
the socket for the next pass through the loop. This is not suitable for most production
installations, but may be quite useful for milter debugging or other software development purposes.

Note that, because the default socket backlog is 5 connections, it may be wise to increase this
backlog by calling "set_listen()" before entering "main()" if using this dispatcher.

EXPORTS

       Each  of these symbols may be imported explicitly, imported with tag ":all", or referenced as part of the
       "Sendmail::PMilter::" package.

       Callback Return Values
         Of these, SMFIS_CONTINUE will allow the milter to continue  being  called  for  the  remainder  of  the
         message phases.  All others will terminate processing of the current message and take the noted action.

         As  a special exception, SMFIS_REJECT and SMFIS_TEMPFAIL in the "envrcpt" callback will reject only the
         current recipient, otherwise continuing message processing as if SMFIS_CONTINUE were returned.

           SMFIS_CONTINUE - continue processing the message
           SMFIS_REJECT - reject the message with a 5xx error
           SMFIS_DISCARD - accept, but discard the message
           SMFIS_ACCEPT - accept the whole message as-is
           SMFIS_TEMPFAIL - reject the message with a 4xx error

       Milter Capability Request Flags
         These values are bitmasks passed as the FLAGS argument to "register()".  Some MTAs may choose different
         methods of resource allocation, so keeping this list short may help the MTA's  memory  usage.   If  the
         needed capabilities are not known, however, "SMFI_CURR_ACTS" should be used.

           SMFIF_ADDHDRS - allow $ctx->addheader()
           SMFIF_CHGBODY - allow $ctx->replacebody()
           SMFIF_MODBODY - (compatibility synonym for SMFIF_CHGBODY)
           SMFIF_ADDRCPT - allow $ctx->addrcpt()
           SMFIF_DELRCPT - allow $ctx->delrcpt()
           SMFIF_CHGHDRS - allow $ctx->chgheader()

           SMFIF_QUARANTINE - allow $ctx->quarantine()
             (requires Sendmail 8.13; not defined in Sendmail::Milter)

           SMFIF_SETSENDER - allow $ctx->setsender()
             (requires special Sendmail patch; see below[*])

           SMFI_V1_ACTS - SMFIF_ADDHDRS through SMFIF_DELRCPT
             (Sendmail 8.11 _FFR_MILTER capabilities)

           SMFI_V2_ACTS - SMFIF_ADDHDRS through SMFIF_CHGHDRS
           SMFI_CURR_ACTS - (compatibility synonym for SMFI_V2_ACTS)
             (Sendmail 8.12 capabilities)

           (Currently no combined macro includes SMFIF_QUARANTINE or
           SMFIF_SETSENDER.)

         [*]  NOTE: SMFIF_SETSENDER is not official as of Sendmail 8.13.x. To enable this flag, Sendmail must be
         patched with the diff available from:

           C<http://www.sourceforge.net/projects/mlfi-setsender>

         Additionally, the following statement must appear after the "use" statements in  your  milter  program;
         otherwise, setsender() will always fail when called:

           local $Sendmail::PMilter::enable_setsender = 1;

SECURITY CONSIDERATIONS

       Running as root
           Running  Perl  as root is dangerous.  Running "Sendmail::PMilter" as root may well be system-assisted
           suicide at this point.  So don't do that.

           More specifically, though, it is possible to run a milter frontend as root, in order to  gain  access
           to  network  resources  (such  as  a  filesystem socket in /var/run), and then drop privileges before
           accepting connections.  To do this, insert drop-privileges code between calls to setconn/auto_setconn
           and main; for instance:

               $milter->auto_setconn('pmilter');
               $> = 65534; # drop root privileges
               $milter->main();

           The semantics of properly dropping  system  administrator  privileges  in  Perl  are,  unfortunately,
           somewhat OS-specific, so this process is not described in detail here.

AUTHOR

       Todd Vierling, <tv@duh.org> <tv@pobox.com>

Maintenance

       Since  0.96  Sendmail::Pmilter  is  no  longer  maintained  on sourceforge.net, cpan:AVAR took it over in
       version 0.96 to fix a minor bug and currently owns the module in PAUSE.

       However this module is effectively orphaned and looking for a  new  maintainer.  The  current  maintainer
       doesn't  use  Sendmail and probably never will again. If this code is important to you and you find a bug
       in it or want something new implemented please:

       •   Fork it & fix it on GitHub at <http://github.com/avar/sendmail-pmilter>

       •   Send AVAR an E-Mail requesting upload permissions so you can upload the fixed version to the CPAN.

THANKS

       rob.casey@bluebottle.com - for the prefork mechanism idea

perl v5.32.1                                       2021-12-26                             Sendmail::PMilter(3pm)