NAME

       Mason::Request - Mason Request Class

SYNOPSIS

           $m->abort (...)
           $m->comp (...)
           etc.

DESCRIPTION

       Mason::Request represents a single request for a page, and is the access point for most Mason features
       not provided by syntactic tags.

       A Mason request is created when you call "$interp->run", or in a web environment, for each new web
       request. A new (sub-)request is also created when you call visit or go on the current request.

       Inside a component you can access the current request object via the global $m.  Outside of a component,
       you can use the class method "Mason::Request->current_request".

COMPONENT PATHS

       The methods comp, comp_exists, construct, go, load, and visit take a component path argument. If the path
       does not begin with a '/', then it is made absolute based on the current component path (using
       rel_to_abs).

       Component paths are like URL paths, and always use a forward slash (/) as the separator, regardless of
       what your operating system uses.

PARAMETERS TO THE new() CONSTRUCTOR

       These parameters would normally be passed in an initial hashref to  "$interp->run", "$m->visit", or
       "$m->go".

       out_method
           Indicates  where  to send the page output. If out_method is a scalar reference, output is appended to
           the scalar.  If out_method is a code reference, the code  is  called  with  the  output  string.  For
           example, to send output to a file called "mason.out":

               open(my $fh, ">", "mason.out);
               ...
               out_method => sub { $fh->print($_[0]) }

           When  "out_method"  is unspecified, the output can be obtained from the Mason::Result object returned
           from "$interp->run".

PUBLIC METHODS

       abort ()
           Ends the current request, finishing the page without returning through components.

           "abort" is implemented by throwing an "Mason::Exception::Abort" object and  can  thus  be  caught  by
           "eval".  The  "aborted"  method is a shortcut for determining whether a caught error was generated by
           "abort".

       aborted ([$err])
           Returns true or undef indicating whether the specified $err was generated by "abort". If no $err  was
           passed, uses $@.

           In  this  Try::Tiny  code,  we  catch  and process fatal errors while letting "abort" exceptions pass
           through:

               try {
                   code_that_may_fail_or_abort()
               } catch {
                   die $_ if $m->aborted($_);
                   # handle fatal errors...
               };

       add_cleanup (code)
           Add a code reference to be executed when the request is cleaned up.

       clear_and_abort ()
           This method is syntactic sugar for calling "clear_buffer()" and then "abort()".  If you are  aborting
           the  request because of an error (or, in a web environment, to do a redirect), you will often want to
           clear the buffer first so that any output generated up to that point is not sent to the client.

       capture (code)
           Execute the code, capturing and returning any  Mason  output  instead  of  outputting  it.  e.g.  the
           following

               my $buf = $m->capture(sub { $m->comp('/foo') });

           is equivalent to

               my $buf = $m->scomp('/foo');

       clear_buffer ()
           Clears  the  Mason output buffer. Any output sent before this line is discarded.  Useful for handling
           error conditions that can only be detected in the middle of a request.

           clear_buffer is, of course, thwarted by flush_buffer.

       comp (path[, params ...])
           Creates a new instance of the component designated by path, and calls its "main" method.  params,  if
           any, are passed to the constructor.

           The "<& &>" tag provides a shortcut for "$m->comp".

       comp_exists (path)
           Makes  the  component path absolute if necessary, and calls Interp comp_exists to determine whether a
           component exists at that path.

       current_comp_class ()
           Returns the current component class. This is determined by walking up the Perl caller()  stack  until
           the first Mason::Component subclass is found.

       current_request ()
           This  class method returns the "Mason::Request" currently in use.  If called when no Mason request is
           active it will return "undef".

       construct (path[, params ...])
           Constructs and return a new instance of the component designated by path.  params, if any, are passed
           to the constructor. Throws an error if path does not exist.

       decline ()
           Clears the output buffer and tries the current request again, but acting as if the previously  chosen
           page component(s) do not exist.

           For example, if the following components exist:

               /news/sports.mc
               /news/dhandler.mc
               /dhandler.mc

           then  a  request  for  path  "/news/sports"  will  initially resolve to "/news/sports.mc".  A call to
           "$m->decline" would restart the request and resolve to "/news/dhandler.mc",  a  second  "$m->decline"
           would resolve to "/dhandler.mc", and a third would throw a "not found" error.

       filter (filter_expr, [filter_expr...], string|coderef)
           Applies one or more filters to a string or to a coderef that returns a string.

               my $filtered_string = $m->filter($.Trim, $.NoBlankLines, $string);

       flush_buffer ()
           Flushes the main output buffer. Anything currently in the buffer is sent to the request's out_method.

           Note  that  anything  output  within a "$m->scomp" or "$m->capture" will not have made it to the main
           output buffer, and thus cannot be flushed.

       go ([request params], path, args...)
           Performs an internal redirect. Clears the output buffer, runs a new request for the  given  path  and
           args, and then aborts when that request is done.

           The first argument may optionally be a hashref of parameters which are passed to the "Mason::Request"
           constructor.

           See also visit.

       interp ()
           Returns the Interp object associated with this request.

       load (path)
           Makes  the  component  path  absolute if necessary, and calls Interp load to load the component class
           associated with the path.

       log ()
           Returns a "Log::Any" logger with a log category specific to the current component.  The category  for
           a component "/foo/bar" would be "Mason::Component::foo::bar".

       notes ([key[, value]])
           The  "notes()"  method provides a place to store application data between components - essentially, a
           hash which persists for the duration of the request.

           "notes($key, $value)" stores a new entry in the  hash;  "notes($key)"  returns  a  previously  stored
           value; and "notes()" without any arguments returns a reference to the entire hash of key-value pairs.

           Consider storing this kind of data in a read-write attribute of the page component.

       print (string)
           Add  the  given  string to the Mason output buffer. This happens implicitly for all content placed in
           the main component body.

       page ()
           Returns the page component originally called in the request.

       path_info ()
           Returns the remainder of the request path beyond the path of the  page  component,  with  no  leading
           slash. e.g. If a request for '/foo/bar/baz' resolves to "/foo.mc", the path_info is "bar/baz". For an
           exact  match,  it will contain the empty string (never undef), so you can determine whether there's a
           path_info with

               if ( length($m->path_info) )

       rel_to_abs (path)
           Converts a component path to absolute form based on the current component, if  it  does  not  already
           begin with a '/'.

       request_args ()
           Returns the original hashref of arguments passed to the request, e.g. via "$interp->run".

       request_path ()
           Returns the original path passed to the request, e.g. in "$interp->run".

       scomp (comp, args...)
           Like comp, but returns the component output as a string instead of printing it. (Think sprintf versus
           printf.)

           See also capture.

       visit ([request params], path, args...)
           Performs  a  subrequest  with  the  given path and args, with output being sent to the current output
           buffer.

           The first argument may optionally be a hashref of parameters which are passed to the "Mason::Request"
           constructor. e.g. to capture the output of the subrequest:

               $m->visit({out_method => \my $buffer}, ...);

           See also go.

MODIFIABLE METHODS

       These methods are not intended to be called externally, but may be useful to modify with method modifiers
       in plugins and subclasses. Their APIs will be kept as stable as possible.

       cleanup_request ()
           A place to perform cleanup duties when the request finishes or  dies  with  an  error,  even  if  the
           request object is not immediately destroyed. Includes anything registered with add_cleanup.

       construct_page_component ($compc, $args)
           Constructs the page component of class $compc, with hashref of constructor arguments $args.

       match_request_path ($request_path)
           Given  a  top  level $request_path, return a corresponding component path or undef if none was found.
           Search includes dhandlers and index files. See Mason::Manual::RequestDispatch.

       process_output ($outref)
           This method is called on the output buffer right before it is sent to its final destination.  $outref
           is a reference to the output string; the method can modify it as desired.

       run ($request_path, args)
           Runs  the  request  with  $request_path and args, where the latter can be either a hashref or a hash.
           This is generally called via << $interp->run >>.

       with_tied_print ($code)
           Execute the given $code with the current selected filehandle  ('print')  tied  to  the  Mason  output
           stream. You could disable the filehandle selection by overriding this to just call $code.

SEE ALSO

       Mason

AUTHOR

       Jonathan Swartz <swartz@pobox.com>

COPYRIGHT AND LICENSE

       This software is copyright (c) 2012 by Jonathan Swartz.

       This  is  free  software;  you  can  redistribute  it and/or modify it under the same terms as the Perl 5
       programming language system itself.

perl v5.34.0                                       2022-05-27                                Mason::Request(3pm)