Provided by: po4a_0.69-1_all 
NAME
Locale::Po4a::Po - PO file manipulation module
SYNOPSIS
use Locale::Po4a::Po;
my $pofile=Locale::Po4a::Po->new();
# Read PO file
$pofile->read('file.po');
# Add an entry
$pofile->push('msgid' => 'Hello', 'msgstr' => 'bonjour',
'flags' => "wrap", 'reference'=>'file.c:46');
# Extract a translation
$pofile->gettext("Hello"); # returns 'bonjour'
# Write back to a file
$pofile->write('otherfile.po');
DESCRIPTION
Locale::Po4a::Po is a module that allows you to manipulate message catalogs. You can load and write
from/to a file (which extension is often po), you can build new entries on the fly or request for the
translation of a string.
For a more complete description of message catalogs in the PO format and their use, please refer to the
info documentation of the gettext program (node "`PO Files"').
This module is part of the po4a project, which objective is to use PO files (designed at origin to ease
the translation of program messages) to translate everything, including documentation (man page, info
manual), package description, debconf templates, and everything which may benefit from this.
OPTIONS ACCEPTED BY THIS MODULE
--porefs type
Specify the reference format. Argument type can be one of never to not produce any reference, file to
only specify the file without the line number, counter to replace line number by an increasing
counter, and full to include complete references (default: full).
--wrap-po no|newlines|number (default: 76)
Specify how the po file should be wrapped. This gives the choice between either files that are nicely
wrapped but could lead to git conflicts, or files that are easier to handle automatically, but harder
to read for humans.
Historically, the gettext suite has reformatted the po files at the 77th column for cosmetics. This
option specifies the behavior of po4a. If set to a numerical value, po4a will wrap the po file after
this column and after newlines in the content. If set to newlines, po4a will only split the msgid and
msgstr after newlines in the content. If set to no, po4a will not wrap the po file at all. The
reference comments are always wrapped by the gettext tools that we use internally.
Note that this option has no impact on how the msgid and msgstr are wrapped, ie on how newlines are
added to the content of these strings.
--msgid-bugs-address email@address
Set the report address for msgid bugs. By default, the created POT files have no Report-Msgid-Bugs-To
fields.
--copyright-holder string
Set the copyright holder in the POT header. The default value is "Free Software Foundation, Inc."
--package-name string
Set the package name for the POT header. The default is "PACKAGE".
--package-version string
Set the package version for the POT header. The default is "VERSION".
Functions concerning entire message catalogs
new()
Creates a new message catalog. If an argument is provided, it's the name of a PO file we should load.
read($)
Reads a PO file (which name is given as argument). Previously existing entries in self are not
removed, the new ones are added to the end of the catalog.
write($)
Writes the current catalog to the given file.
write_if_needed($$)
Like write, but if the PO or POT file already exists, the object will be written in a temporary file
which will be compared with the existing file to check if the update is needed (this avoids to change
a POT just to update a line reference or the POT-Creation-Date field).
filter($)
This function extracts a catalog from an existing one. Only the entries having a reference in the
given file will be placed in the resulting catalog.
This function parses its argument, converts it to a Perl function definition, evals this definition
and filters the fields for which this function returns true.
I love Perl sometimes ;)
to_utf8()
Recodes to UTF-8 the PO's msgstrs. Does nothing if the charset is not specified in the PO file
("CHARSET" value), or if it's already UTF-8 or ASCII.
Functions to use a message catalog for translations
gettext($%)
Request the translation of the string given as argument in the current catalog. The function returns
the original (untranslated) string if the string was not found.
After the string to translate, you can pass a hash of extra arguments. Here are the valid entries:
wrap
boolean indicating whether we can consider that whitespaces in string are not important. If yes,
the function canonizes the string before looking for a translation, and wraps the result.
wrapcol
the column at which we should wrap (default: 76).
stats_get()
Returns statistics about the hit ratio of gettext since the last time that stats_clear() was called.
Please note that it's not the same statistics than the one printed by msgfmt --statistic. Here, it's
statistics about recent usage of the PO file, while msgfmt reports the status of the file. Example
of use:
[some use of the PO file to translate stuff]
($percent,$hit,$queries) = $pofile->stats_get();
print "So far, we found translations for $percent\% ($hit of $queries) of strings.\n";
stats_clear()
Clears the statistics about gettext hits.
Functions to build a message catalog
push(%)
Push a new entry at the end of the current catalog. The arguments should form a hash table. The valid
keys are:
msgid
the string in original language.
msgstr
the translation.
reference
an indication of where this string was found. Example: file.c:46 (meaning in 'file.c' at line
46). It can be a space-separated list in case of multiple occurrences.
comment
a comment added here manually (by the translators). The format here is free.
automatic
a comment which was automatically added by the string extraction program. See the --add-comments
option of the xgettext program for more information.
flags
space-separated list of all defined flags for this entry.
Valid flags are: c-text, python-text, lisp-text, elisp-text, librep-text, smalltalk-text, java-
text, awk-text, object-pascal-text, ycp-text, tcl-text, wrap, no-wrap and fuzzy.
See the gettext documentation for their meaning.
type
this is mostly an internal argument: it is used while gettextizing documents. The idea here is to
parse both the original and the translation into a PO object, and merge them, using one's msgid
as msgid and the other's msgid as msgstr. To make sure that things get ok, each msgid in PO
objects are given a type, based on their structure (like "chapt", "sect1", "p" and so on in
DocBook). If the types of strings are not the same, that means that both files do not share the
same structure, and the process reports an error.
This information is written as automatic comment in the PO file since this gives to translators
some context about the strings to translate.
wrap
boolean indicating whether whitespaces can be mangled in cosmetic reformattings. If true, the
string is canonized before use.
This information is written to the PO file using the wrap or no-wrap flag.
wrapcol
the column at which we should wrap (default: 76).
This information is not written to the PO file.
Miscellaneous functions
count_entries()
Returns the number of entries in the catalog (without the header).
count_entries_doc()
Returns the number of entries in document. If a string appears multiple times in the document, it
will be counted multiple times.
msgid($)
Returns the msgid of the given number.
msgid_doc($)
Returns the msgid with the given position in the document.
type_doc($)
Returns the type of the msgid with the given position in the document. This is probably only useful
to gettextization, and it's stored separately from {$msgid}{'type'} because the later location may be
overwritten by another type when the $msgid is duplicated in the master document.
get_charset()
Returns the character set specified in the PO header. If it hasn't been set, it will return "UTF-8".
set_charset($)
This sets the character set of the PO header to the value specified in its first argument. If you
never call this function (and no file with a specified character set is read), the default value is
left to "UTF-8". This value doesn't change the behavior of this module, it's just used to fill that
field in the header, and to return it in get_charset().
AUTHORS
Denis Barbier <barbier@linuxfr.org>
Martin Quinson (mquinson#debian.org)
Po4a Tools 2023-01-03 Locale::Po4a::Po(3pm)