Provided by: libdevice-modem-perl_1.59-1_all 
NAME
Device::Modem - Perl extension to talk to modem devices connected via serial port
WARNING
This is BETA software, so use it at your own risk, and without ANY warranty! Have fun.
SYNOPSIS
use Device::Modem;
my $modem = Device::Modem->new( port => '/dev/ttyS1' );
if( $modem->connect( baudrate => 9600 ) ) {
print "connected!\n";
} else {
print "sorry, no connection with serial port!\n";
}
$modem->attention(); # send `attention' sequence (+++)
($ok, $answer) = $modem->dial('02270469012'); # dial phone number
$ok = $modem->dial(3); # 1-digit parameter = dial number stored in memory 3
$modem->echo(1); # enable local echo (0 to disable)
$modem->offhook(); # Take off hook (ready to dial)
$modem->hangup(); # returns modem answer
$modem->is_active(); # Tests whether modem device is active or not
# So far it works for modem OFF/ modem ON condition
$modem->reset(); # hangup + attention + restore setting 0 (Z0)
$modem->restore_factory_settings(); # Handle with care!
$modem->restore_factory_settings(1); # Same with preset profile 1 (can be 0 or 1)
$modem->send_init_string(); # Send initialization string
# Now this is fixed to 'AT H0 Z S7=45 S0=0 Q0 V1 E0 &C0 X4'
# Get/Set value of S1 register
my $S1 = $modem->S_register(1);
my $S1 = $modem->S_register(1, 55); # Don't do that if you definitely don't know!
# Get status of managed signals (CTS, DSR, RLSD, RING)
my %signal = $modem->status();
if( $signal{DSR} ) { print "Data Set Ready signal active!\n"; }
# Stores this number in modem memory number 3
$modem->store_number(3, '01005552817');
$modem->repeat(); # Repeat last command
$modem->verbose(1); # Normal text responses (0=numeric codes)
# Some raw AT commands
$modem->atsend( 'ATH0' );
print $modem->answer();
$modem->atsend( 'ATDT01234567' . Device::Modem::CR );
print $modem->answer();
DESCRIPTION
"Device::Modem" class implements basic AT (Hayes) compliant device abstraction. It can be inherited by
sub classes (as "Device::Gsm"), which are based on serial connections.
Things "Device::Modem" can do
• connect to a modem on your serial port
• test if the modem is alive and working
• dial a number and connect to a remote modem
• work with registers and settings of the modem
• issue standard or arbitrary "AT" commands, getting results from modem
Things "Device::Modem" can't do yet
• Transfer a file to a remote modem
• Control a terminal-like (or a PPP) connection. This should really not be very hard to do anyway.
• Many others...
Things it will never be able to do
• Coffee :-)
Examples
In the `examples' directory, there are some scripts that should work without big problems, that you can
take as (yea) examples:
`examples/active.pl'
Tests if modem is alive
`examples/caller-id.pl'
Waits for an incoming call and displays date, time and phone number of the caller. Normally this is
available everywhere, but you should check your local phone line and settings.
`examples/dial.pl'
Dials a phone number and display result of call
`examples/shell.pl'
(Very) poor man's minicom/hyperterminal utility
`examples/xmodem.pl'
First attempt at a test script to receive a file via xmodem protocol. Please be warned that this
thing does not have a chance to work. It's only a (very low priority) work in progress...
If you want to help out, be welcome!
METHODS
answer()
One of the most used methods, waits for an answer from the device. It waits until $timeout (seconds) is
reached (but don't rely on this time to be very correct) or until an expected string is encountered.
Example:
$answer = $modem->answer( [$expect [, $timeout]] )
Returns $answer that is the string received from modem stripped of all Carriage Return and Line Feed
chars only at the beginning and at the end of the string. No in-between CR+LF are stripped.
Note that if you need the raw answer from the modem, you can use the _answer() (note that underscore char
before answer) method, which does not strip anything from the response, so you get the real modem answer
string.
Parameters:
• $expect - Can be a regexp compiled with "qr" or a simple substring. Input coming from the modem is
matched against this parameter. If input matches, result is returned.
• $timeout - Expressed in milliseconds. After that time, answer returns result also if nothing has been
received. Example: 10000. Default: $Device::Modem::TIMEOUT, currently 500 ms.
atsend()
Sends a raw "AT" command to the device connected. Note that this method is most used internally, but can
be also used to send your own custom commands. Example:
$ok = $modem->atsend( $msg )
The only parameter is $msg, that is the raw AT command to be sent to modem expressed as string. You must
include the "AT" prefix and final Carriage Return and/or Line Feed manually. There is the special
constant "CR" that can be used to include such a char sequence into the at command.
Returns $ok flag that is true if all characters are sent successfully, false otherwise.
Example:
# Enable verbose messages
$modem->atsend( 'AT V1' . Device::Modem::CR );
# The same as:
$modem->verbose(1);
attention()
This command sends an attention sequence to modem. This allows modem to pass in command state and accept
AT commands. Example:
$ok = $modem->attention()
connect()
Connects "Device::Modem" object to the specified serial port. There are options (the same options that
"Device::SerialPort" has) to control the parameters associated to serial link. Example:
$ok = $modem->connect( [%options] )
List of allowed options follows:
"baudrate"
Controls the speed of serial communications. The default is 19200 baud, that should be supported by
all modern modems. However, here you can supply a custom value. Common speed values: 300, 1200,
2400, 4800, 9600, 19200, 38400, 57600, 115200. This parameter is handled directly by
"Device::SerialPort" object.
"databits"
This tells how many bits your data word is composed of. Default (and most common setting) is 8.
This parameter is handled directly by "Device::SerialPort" object.
"handshake"
Sets the handshake (or flow control) method for the serial port. By default it is "none", but can be
either "rts" (hardware flow control) or "xoff" (software flow control). These flow control modes may
or may not work depending on your modem device or software.
"init_string"
Custom initialization string can be supplied instead of the built-in one, that is the following: "H0
Z S7=45 S0=0 Q0 V1 E0 &C0 X4", that is taken shamelessly from "minicom" utility, I think.
"parity"
Controls how parity bit is generated and checked. Can be even, odd or none. Default is none. This
parameter is handled directly by "Device::SerialPort" object.
"stopbits"
Tells how many bits are used to identify the end of a data word. Default (and most common usage) is
1. This parameter is handled directly by "Device::SerialPort" object.
dial()
Dials a telephone number. Can perform both voice and data calls.
Usage:
$ok = $modem->dial($number);
$ok = $modem->dial($number, $timeout);
$ok = $modem->dial($number, $timeout, $mode);
Takes the modem off hook, dials the specified number and returns modem answer.
Regarding voice calls, you will not be able to send your voice through. You probably have to connect an
analog microphone, and just speak. Or use a GSM phone. For voice calls, a simple ";" is appended to the
number to be dialed.
If the number to dial is 1 digit only, extracts the number from the address book, provided your device
has one. See "store_number()".
Examples:
# Simple usage. Timeout and mode are optional.
$ok = $mode->dial('123456789');
# List context: allows one to get at exact modem answer
# like `CONNECT 19200/...', `BUSY', `NO CARRIER', ...
# Also, 30 seconds timeout
($ok, $answer) = $modem->dial('123456789', 30);
If called in scalar context, returns only success of connection. If modem answer contains the "CONNECT"
string, "dial()" returns successful state, otherwise a false value is returned.
If called in list context, returns the same $ok flag, but also the exact modem answer to the dial
operation in the $answer scalar. $answer typically can contain strings like:
"CONNECT 19200"
"NO CARRIER"
"BUSY"
and so on ... all standard modem answers to a dial command.
Parameters are:
$number
mandatory, this is the phone number to dial. If $number is only 1 digit, it is interpreted as: dial
number in my address book position $number.
So if your code is:
$modem->dial( 2, 10 );
This means: dial number in the modem internal address book (see "store_number" for a way to
read/write address book) in position number 2 and wait for a timeout of 10 seconds.
$timeout
optional, default is 30 seconds.
Timeout expressed in seconds to wait for the remote device to answer. Please do not expect an exact
wait for the number of seconds you specified.
$mode
optional, default is "DATA", as string. Allows one to specify the type of call. Can be either:
"DATA" (default)
To perform a data call.
"VOICE"
To perform a voice call, if your device supports it. No attempt to verify whether your device
can do that will be made.
disconnect()
Disconnects "Device::Modem" object from serial port. This method calls underlying "disconnect()" of
"Device::SerialPort" object. Example:
$modem->disconnect();
echo()
Enables or disables local echo of commands. This is managed automatically by "Device::Modem" object.
Normally you should not need to worry about this. Usage:
$ok = $modem->echo( $enable )
hangup()
Does what it is supposed to do. Hang up the phone thus terminating any active call. Usage:
$ok = $modem->hangup();
is_active()
Can be used to check if there is a modem attached to your computer. If modem is alive and responding (on
serial link, not to a remote call), "is_active()" returns true (1), otherwise returns false (0).
Test of modem activity is done through DSR (Data Set Ready) signal. If this signal is in off state, modem
is probably turned off, or not working. From my tests I've found that DSR stays in "on" state after more
or less one second I turn off my modem, so know you know that.
Example:
if( $modem->is_active() ) {
# Ok!
} else {
# Modem turned off?
}
log()
Simple accessor to log object instanced at object creation time. Used internally. If you want to know
the gory details, see "Device::Modem::Log::*" objects. You can also see the examples for how to log
something without knowing all the gory details.
Hint: $modem->log->write('warning', 'ok, my log message here');
new()
"Device::Modem" constructor. This takes several options. A basic example:
my $modem = Device::Modem->new( port => '/dev/ttyS0' );
if under Linux or some kind of unix machine, or
my $modem = Device::Modem->new( port => 'COM1' );
if you are using a Win32 machine.
This builds the "Device::Modem" object with all the default parameters. This should be fairly usable if
you want to connect to a real modem. Note that I'm testing it with a 3Com US Robotics 56K Message modem
at 19200 baud and works ok.
List of allowed options:
• "port" - serial port to connect to. On Unix, can be also a convenient link as /dev/modem (the default
value). For Win32, "COM1,2,3,4" can be used.
• "log" - this specifies the method and eventually the filename for logging. Logging process with
"Device::Modem" is controlled by log plugins, stored under Device/Modem/Log/ folder. At present,
there are two main plugins: "Syslog" and "File". "Syslog" does not work with Win32 machines. When
using "File" plug-in, all log information will be written to a default filename if you don't specify
one yourself. The default is /var/log/modem/modem.log.
Also there is the possibility to pass a custom log object, if this object provides the following
"write()" call:
$log_object->write( $loglevel, $logmessage )
You can simply pass this object (already instanced) as the "log" property.
Examples:
# For Win32, default is to log in "%WINBOOTDIR%/temp/modem.log" file
my $modem = Device::Modem->new( port => 'COM1' );
# Unix, custom logfile
my $modem = Device::Modem->new( port => '/dev/ttyS0', log => 'file,/home/neo/matrix.log' )
# With custom log object
my $modem = Device::modem->new( port => '/dev/ttyS0', log => My::LogObj->new() );
• "loglevel" - default logging level. One of (order of decrescent verbosity): "debug", "verbose",
"notice", "info", "warning", "err", "crit", "alert", "emerg".
offhook()
Takes the modem "off hook", ready to dial. Normally you don't need to use this. Also "dial()" goes
automatically off hook before dialing.
parse_answer()
This method works like "answer()", it accepts the same parameters, but it does not return the raw modem
answer. Instead, it returns the answer string stripped of all CR/LF characters at the beginning and at
the end.
"parse_answer()" is meant as an easy way of extracting result code ("OK", "ERROR", ...) and information
strings that can be sent by modem in response to specific commands. Example:
> AT xSHOW_MODELx<CR>
US Robotics 56K Message
OK
>
In this example, "OK" is the result and "US Robotics 56K Message" is the informational message.
In fact, another difference with "answer()" is in the return value(s). Here are some examples:
$modem->atsend( '?my_at_command?' );
$answer = $modem->parse_answer();
where $answer is the complete response string, or:
($result, @lines) = $modem->parse_answer();
where $result is the "OK" or "ERROR" final message and @lines is the array of information messages (one
or more lines). For the model example, $result would hold ""OK"" and @lines would consist of only 1 line
with the string ""US Robotics 56K Message"".
port()
Used internally. Accesses the "Device::SerialPort" underlying object. If you need to experiment or do
low-level serial calls, you may want to access this. Please report any usage of this kind, because
probably (?) it is possible to include it in a higher level method.
As of 1.52, "port()" will automatically try to reconnect if it detects a bogus underlying port object. It
will reconnect with the same options used when "connect()"ing the first time.
If no connection has taken place yet, then no attempt to automatically reconnect will be attempted.
repeat()
Repeats the last "AT" command issued. Usage:
$ok = $modem->repeat()
reset()
Tries in any possible way to reset the modem to the starting state, hanging up all active calls,
resending the initialization string and preparing to receive "AT" commands.
restore_factory_settings()
Restores the modem default factory settings. There are normally two main "profiles", two different
memories for all modem settings, so you can load profile 0 and profile 1, that can be different depending
on your modem manufacturer.
Usage:
$ok = $modem->restore_factory_settings( [$profile] )
If no $profile is supplied, 0 is assumed as default value.
Check on your modem hardware manual for the meaning of these profiles.
S_register()
Gets or sets an S register value. These are some internal modem registers that hold important information
that controls all modem behaviour. If you don't know what you are doing, don't use this method. Usage:
$value = $modem->S_register( $reg_number [, $new_value] );
$reg_number ranges from 0 to 99 (sure?). If no $new_value is supplied, return value is the current
register value. If a $new_value is supplied (you want to set the register value), return value is the
new value or "undef" if there was an error setting the new value.
<!-- Qui è spiegata da cani -->
Examples:
# Get value of S7 register
$modem->S_register(7);
# Set value of S0 register to 0
$modem->S_register(0, 0);
send_init_string()
Sends the initialization string to the connected modem. Usage:
$ok = $modem->send_init_string( [$init_string] );
If you specified an "init_string" as an option to "new()" object constructor, that is taken by default to
initialize the modem. Else you can specify $init_string parameter to use your own custom initialization
string. Be careful!
status()
Returns status of main modem signals as managed by "Device::SerialPort" (or "Win32::SerialPort") objects.
The signals reported are:
CTS Clear to send
DSR Data set ready
RING
Active if modem is ringing
RLSD
??? Released line ???
Return value of "status()" call is a hash, where each key is a signal name and each value is > 0 if
signal is active, 0 otherwise. Usage:
...
my %sig = $modem->status();
for ('CTS','DSR','RING','RLSD') {
print "Signal $_ is ", ($sig{$_} > 0 ? 'on' : 'off'), "\n";
}
store_number()
Store telephone number in modem internal address book, to be dialed later (see "dial()" method). Usage:
$ok = $modem->store_number( $position, $number )
where $position is the address book memory slot to store phone number (usually from 0 to 9), and $number
is the number to be stored in the slot. Return value is true if operation was successful, false
otherwise.
verbose()
Enables or disables verbose messages. This is managed automatically by "Device::Modem" object. Normally
you should not need to worry about this. Usage:
$ok = $modem->verbose( $enable )
wait()
Waits (yea) for a given amount of time (in milliseconds). Usage:
$modem->wait( [$msecs] )
Wait is implemented via "select" system call. Don't know if this is really a problem on some platforms.
write_drain()
Only a simple wrapper around "Device::SerialPort::write_drain" method. Disabled for Win32 platform, that
doesn't have that.
REQUIRES
Device::SerialPort (Win32::SerialPort for Win32 machines)
EXPORT
None
TO-DO
AutoScan
An AT command script with all interesting commands is run when `autoscan' is invoked, creating a
`profile' of the current device, with list of supported commands, and database of
brand/model-specific commands
Serial speed auto-detect
Now if you connect to a different baud rate than that of your modem, probably you will get no
response at all. It would be nice if "Device::Modem" could auto-detect the speed to correctly connect
at your modem.
File transfers
It would be nice to implement "[xyz]modem" like transfers between two "Device::Modem" objects
connected with two modems.
FAQ
There is a minimal FAQ document for this module online at
<http://www.streppone.it/cosimo/work/perl/CPAN/Device-Modem/FAQ.html>
SUPPORT
Please feel free to contact me at my e-mail address cosimo@cpan.org for any information, to resolve
problems you can encounter with this module or for any kind of commercial support you may need.
AUTHOR
Cosimo Streppone, cosimo@cpan.org
COPYRIGHT
(C) 2002-2014 Cosimo Streppone, cosimo@cpan.org
This library is free software; you can only redistribute it and/or modify it under the same terms as Perl
itself.
SEE ALSO
Device::SerialPort, Win32::SerialPort, Device::Gsm, perl
perl v5.30.3 2020-06-20 Device::Modem(3pm)