Provided by: libdate-manip-perl_6.95-1_all 
NAME
Date::Manip::DM5 - Date manipulation routines
SYNOPSIS
use Date::Manip;
$version = DateManipVersion;
Date_Init();
Date_Init("VAR=VAL","VAR=VAL",...);
@list = Date_Init();
@list = Date_Init("VAR=VAL","VAR=VAL",...);
$date = ParseDate(\@args);
$date = ParseDate($string);
$date = ParseDate(\$string);
@date = UnixDate($date,@format);
$date = UnixDate($date,@format);
$delta = ParseDateDelta(\@args);
$delta = ParseDateDelta($string);
$delta = ParseDateDelta(\$string);
@str = Delta_Format($delta,$dec,@format);
$str = Delta_Format($delta,$dec,@format);
$recur = ParseRecur($string,$base,$date0,$date1,$flags);
@dates = ParseRecur($string,$base,$date0,$date1,$flags);
$flag = Date_Cmp($date1,$date2);
$d = DateCalc($d1,$d2 [,$errref] [,$del]);
$date = Date_SetTime($date,$hr,$min,$sec);
$date = Date_SetTime($date,$time);
$date = Date_SetDateField($date,$field,$val [,$nocheck]);
$date = Date_GetPrev($date,$dow,$today,$hr,$min,$sec);
$date = Date_GetPrev($date,$dow,$today,$time);
$date = Date_GetNext($date,$dow,$today,$hr,$min,$sec);
$date = Date_GetNext($date,$dow,$today,$time);
$name = Date_IsHoliday($date);
$listref = Events_List($date);
$listref = Events_List($date0,$date1);
$date = Date_ConvTZ($date);
$date = Date_ConvTZ($date,$from);
$date = Date_ConvTZ($date,"",$to);
$date = Date_ConvTZ($date,$from,$to);
$flag = Date_IsWorkDay($date [,$flag]);
$date = Date_NextWorkDay($date,$off [,$flag]);
$date = Date_PrevWorkDay($date,$off [,$flag]);
$date = Date_NearestWorkDay($date [,$tomorrowfirst]);
The above routines all check to make sure that Date_Init is called. If it hasn't been, they will call it
automatically. As a result, there is usually no need to call Date_Init explicitly unless you want to
change some of the config variables (described below). They also do error checking on the input.
The routines listed below are intended primarily for internal use by other Date::Manip routines. They do
little or no error checking, and do not explicitly call Date_Init. Those functions are all done in the
main Date::Manip routines above.
Because they are significantly faster than the full Date::Manip routines, they are available for use with
a few caveats. Since little or no error checking is done, it is the responsibility of the programmer to
ensure that valid data (AND valid dates) are passed to them. Passing invalid data (such as a non-numeric
month) or invalid dates (Feb 31) will fail in unpredictable ways (possibly returning erroneous results).
Also, since Date_Init is not called by these, it must be called explicitly by the programmer before using
these routines.
In the following routines, $y may be entered as either a 2 or 4 digit year (it will be converted to a 4
digit year based on the variable YYtoYYYY described below). Month and day should be numeric in all
cases. Most (if not all) of the information below can be gotten from UnixDate which is really the way I
intended it to be gotten, but there are reasons to use these (these are significantly faster).
$day = Date_DayOfWeek($m,$d,$y);
$secs = Date_SecsSince1970($m,$d,$y,$h,$mn,$s);
$secs = Date_SecsSince1970GMT($m,$d,$y,$h,$mn,$s);
$days = Date_DaysSince1BC($m,$d,$y);
$day = Date_DayOfYear($m,$d,$y);
($y,$m,$d,$h,$mn,$s) = Date_NthDayOfYear($y,$n);
$days = Date_DaysInYear($y);
$days = Date_DaysInMonth($m,$y);
$wkno = Date_WeekOfYear($m,$d,$y,$first);
$flag = Date_LeapYear($y);
$day = Date_DaySuffix($d);
$tz = Date_TimeZone();
ROUTINES
Date_Init
Date_Init();
Date_Init("VAR=VAL","VAR=VAL",...);
@list = Date_Init();
@list = Date_Init("VAR=VAL","VAR=VAL",...);
Normally, it is not necessary to explicitly call Date_Init. The first time any of the other routines
are called, Date_Init will be called to set everything up. If for some reason you want to change the
configuration of Date::Manip, you can pass the appropriate string or strings into Date_Init to
reinitialize things.
The strings to pass in are of the form "VAR=VAL". Any number may be included and they can come in
any order. VAR may be any configuration variable. A list of all configuration variables is given in
the section CUSTOMIZING DATE::MANIP below. VAL is any allowed value for that variable. For example,
to switch from English to French and use non-US format (so that 12/10 is Oct 12), do the following:
Date_Init("Language=French","DateFormat=non-US");
If Date_Init is called in list context, it will return a list of all config variables and their
values suitable for passing in to Date_Init to return Date::Manip to the current state. The only
possible problem is that by default, holidays will not be erased, so you may need to prepend the
"EraseHolidays=1" element to the list.
ParseDate
$date = ParseDate(\@args);
$date = ParseDate($string);
$date = ParseDate(\$string);
This takes an array or a string containing a date and parses it. When the date is included as an
array (for example, the arguments to a program) the array should contain a valid date in the first
one or more elements (elements after a valid date are ignored). Elements containing a valid date are
shifted from the array. The largest possible number of elements which can be correctly interpreted
as a valid date are always used. If a string is entered rather than an array, that string is tested
for a valid date. The string is unmodified, even if passed in by reference.
The real work is done in the ParseDateString routine.
The ParseDate routine is primarily used to handle command line arguments. If you have a command
where you want to enter a date as a command line argument, you can use Date::Manip to make something
like the following work:
mycommand -date Dec 10 1997 -arg -arg2
No more reading man pages to find out what date format is required in a man page.
Historical note: this is originally why the Date::Manip routines were written (though long before
they were released as the Date::Manip module). I was using a bunch of programs (primarily batch
queue managers) where dates and times were entered as command line options and I was getting highly
annoyed at the many different (but not compatible) ways that they had to be entered. Date::Manip
originally consisted of basically 1 routine which I could pass "@ARGV" to and have it remove a date
from the beginning.
ParseDateString
$date = ParseDateString($string);
This routine is called by ParseDate, but it may also be called directly to save some time (a
negligible amount).
NOTE: One of the most frequently asked questions that I have gotten is how to parse seconds since
the epoch. ParseDateString cannot simply parse a number as the seconds since the epoch (it conflicts
with some ISO-8601 date formats). There are two ways to get this information. First, you can do the
following:
$secs = ... # seconds since Jan 1, 1970 00:00:00 GMT
$date = DateCalc("Jan 1, 1970 00:00:00 GMT","+ $secs");
Second, you can call it directly as:
$date = ParseDateString("epoch $secs");
To go backwards, just use the "%s" format of UnixDate:
$secs = UnixDate($date,"%s");
A full date actually includes 2 parts: date and time. A time must include hours and minutes and can
optionally include seconds, fractional seconds, an am/pm type string, and a time zone. For example:
[at] HH:MN [Zone]
[at] HH:MN [am] [Zone]
[at] HH:MN:SS [am] [Zone]
[at] HH:MN:SS.SSSS [am] [Zone]
[at] HH am [Zone]
Hours can be written using 1 or 2 digits, but the single digit form may only be used when no
ambiguity is introduced (i.e. when it is not immediately preceded by a digit).
A time is usually entered in 24 hour mode, but 12 hour mode can be used as well if AM/PM are entered
(AM can be entered as AM or A.M. or other variations depending on the language).
Fractional seconds are also supported in parsing but the fractional part is discarded (with NO
rounding occurring).
Time zones always appear immediately after the time. A number of different forms are supported (see
the section TIME ZONES below).
Incidentally, the time is removed from the date before the date is parsed, so the time may appear
before or after the date, or between any two parts of the date.
Valid date formats include the ISO 8601 formats:
YYYYMMDDHHMNSSF...
YYYYMMDDHHMNSS
YYYYMMDDHHMN
YYYYMMDDHH
YY-MMDDHHMNSSF...
YY-MMDDHHMNSS
YY-MMDDHHMN
YY-MMDDHH
YYYYMMDD
YYYYMM
YYYY
YY-MMDD
YY-MM
YY
YYYYwWWD ex. 1965-W02-2
YYwWWD
YYYYDOY ex. 1965-045
YYDOY
In the above list, YYYY and YY signify 4 or 2 digit years, MM, DD, HH, MN, SS refer to two digit
month, day, hour, minute, and second respectively. F... refers to fractional seconds (any number of
digits) which will be ignored. In all cases, the date and time parts may be separated by the letter
"T" (but this is optional), so
2002-12-10-12:00:00
2002-12-10T12:00:00 are identical.
The last 4 formats can be explained by example: 1965-w02-2 refers to Tuesday (day 2) of the 2nd week
of 1965. 1965-045 refers to the 45th day of 1965.
In all cases, parts of the date may be separated by dashes "-". If this is done, 1 or 2 digit forms
of MM, DD, etc. may be used. All dashes are optional except for those given in the table above
(which MUST be included for that format to be correctly parsed). So 19980820, 1998-0820, 1998-08-20,
1998-8-20, and 199808-20 are all equivalent, but that date may NOT be written as 980820 (it must be
written as 98-0820).
NOTE: Even though not allowed in the standard, the time zone for an ISO-8601 date is flexible and
may be any of the time zones understood by Date::Manip.
Additional date formats are available which may or may not be common including:
MM/DD **
MM/DD/YY **
MM/DD/YYYY **
mmmDD DDmmm mmmYYYY/DD mmmYYYY
mmmDD/YY DDmmmYY DD/YYmmm YYYYmmmDD YYYYmmm
mmmDDYYYY DDmmmYYYY DDYYYYmmm YYYY/DDmmm
Where mmm refers to the name of a month. All parts of the date can be separated by valid separators
(space, "/", or "."). The separator "-" may be used as long as it doesn't conflict with an ISO 8601
format, but this is discouraged since it is easy to overlook conflicts. For example, the format
MM/DD/YY is just fine, but MM-DD-YY does not work since it conflicts with YY-MM-DD. To be safe, if
"-" is used as a separator in a non-ISO format, they should be turned into "/" before calling the
Date::Manip routines. As with ISO 8601 formats, all separators are optional except for those given
as a "/" in the list above.
** Note that with these formats, Americans tend to write month first, but many other countries tend
to write day first. The latter behavior can be obtained by setting the config variable DateFormat to
something other than "US" (see CUSTOMIZING DATE::MANIP below).
Date separators are treated very flexibly (they are converted to spaces), so the following dates are
all equivalent:
12/10/1965
12-10 / 1965
12 // 10 -. 1965
In some cases, this may actually be TOO flexible, but no attempt is made to trap this.
Years can be entered as 2 or 4 digits, days and months as 1 or 2 digits. Both days and months must
include 2 digits whenever they are immediately adjacent to another numeric part of the date or time.
Date separators are required if single digit forms of DD or MM are used. If separators are not used,
the date will either be unparsable or will get parsed incorrectly.
Miscellaneous other allowed formats are:
which dofw in mmm in YY "first Sunday in June
1996 at 14:00" **
dofw week num YY "Sunday week 22 1995" **
which dofw YY "22nd Sunday at noon" **
dofw which week YY "Sunday 22nd week in
1996" **
next/last dofw "next Friday at noon"
next/last week/month "next month"
in num days/weeks/months "in 3 weeks at 12:00"
num days/weeks/months later "3 weeks later"
num days/weeks/months ago "3 weeks ago"
dofw in num week "Friday in 2 weeks"
in num weeks dofw "in 2 weeks on Friday"
dofw num week ago "Friday 2 weeks ago"
num week ago dofw "2 weeks ago Friday"
last day in mmm in YY "last day of October"
dofw "Friday" (Friday of
current week)
Nth "12th", "1st" (day of
current month)
epoch SECS seconds since the epoch
(negative values are
supported)
** Note that the formats "Sunday week 22" and "22nd Sunday" give very different behaviors. "Sunday
week 22" returns the Sunday of the 22nd week of the year based on how week 1 is defined. ISO 8601
defines week one to contain Jan 4, so "Sunday week 1" might be the first or second Sunday of the
current year, or the last Sunday of the previous year. "22nd Sunday" gives the actual 22nd time
Sunday occurs in a given year, regardless of the definition of a week.
Note that certain words such as "in", "at", "of", etc. which commonly appear in a date or time are
ignored. Also, the year is always optional.
In addition, the following strings are recognized:
today (exactly now OR today at a given time if a time is specified)
now (synonym for today)
yesterday (exactly 24 hours ago unless a time is specified)
tomorrow (exactly 24 hours from now unless a time is specified)
noon (12:00:00)
midnight (00:00:00) Other languages have similar (and in some cases additional) strings.
Some things to note:
All strings are case insensitive. "December" and "DEceMBer" both work.
When a part of the date is not given, defaults are used: year defaults to current year; hours,
minutes, seconds to 00.
The year may be entered as 2 or 4 digits. If entered as 2 digits, it will be converted to a 4 digit
year. There are several ways to do this based on the value of the YYtoYYYY variable (described
below). The default behavior it to force the 2 digit year to be in the 100 year period CurrYear-89
to CurrYear+10. So in 1996, the range is [1907 to 2006], and the 2 digit year 05 would refer to 2005
but 07 would refer to 1907. See CUSTOMIZING DATE::MANIP below for information on YYtoYYYY for other
methods.
Dates are always checked to make sure they are valid.
In all of the formats, the day of week ("Friday") can be entered anywhere in the date and it will be
checked for accuracy. In other words,
"Tue Jul 16 1996 13:17:00" will work but
"Jul 16 1996 Wednesday 13:17:00" will not (because Jul 16, 1996 is Tuesday, not Wednesday). Note
that depending on where the weekday comes, it may give unexpected results when used in array context
(with ParseDate). For example, the date ("Jun","25","Sun","1990") would return June 25 of the
current year since Jun 25, 1990 is not Sunday.
The times "12:00 am", "12:00 pm", and "midnight" are not well defined. For good or bad, I use the
following convention in Date::Manip:
midnight = 12:00am = 00:00:00
noon = 12:00pm = 12:00:00 and the day goes from 00:00:00 to 23:59:59. In other words, midnight
is the beginning of a day rather than the end of one. The time 24:00:00 is also allowed (though it
is automatically transformed to 00:00:00 of the following day).
The format of the date returned is YYYYMMDDHH:MM:SS. The advantage of this time format is that two
times can be compared using simple string comparisons to find out which is later. Also, it is
readily understood by a human. Alternate forms can be used if that is more convenient. See
Date_Init below and the config variable Internal.
NOTE: The format for the date is going to change at some point in the future to
YYYYMMDDHH:MN:SS+HHMN*FLAGS. In order to maintain compatibility, you should use UnixDate to extract
information from a date, and Date_Cmp to compare two dates. The simple string comparison will only
work for dates in the same time zone.
UnixDate
@date = UnixDate($date,@format);
$date = UnixDate($date,@format);
This takes a date and a list of strings containing formats roughly identical to the format strings
used by the UNIX date(1) command. Each format is parsed and an array of strings corresponding to
each format is returned.
$date may be any string that can be parsed by ParseDateString.
The format options are:
Year
%y year - 00 to 99
%Y year - 0001 to 9999
Month, Week
%m month of year - 01 to 12
%f month of year - " 1" to "12"
%b,%h month abbreviation - Jan to Dec
%B month name - January to December
Day
%j day of the year - 001 to 366
%d day of month - 01 to 31
%e day of month - " 1" to "31"
%v weekday abbreviation - " S"," M"," T"," W","Th"," F","Sa"
%a weekday abbreviation - Sun to Sat
%A weekday name - Sunday to Saturday
%w day of week - 1 (Monday) to 7 (Sunday)
%E day of month with suffix - 1st, 2nd, 3rd...
Hour
%H hour - 00 to 23
%k hour - " 0" to "23"
%i hour - " 1" to "12"
%I hour - 01 to 12
%p AM or PM
Minute, Second, Time zone
%M minute - 00 to 59
%S second - 00 to 59
%Z time zone - "EDT"
%z time zone as GMT offset - "+0100"
Epoch (see NOTE 3 below)
%s seconds from 1/1/1970 GMT- negative if before 1/1/1970
%o seconds from Jan 1, 1970
in the current time zone
Date, Time
%c %a %b %e %H:%M:%S %Y - Fri Apr 28 17:23:15 1995
%C,%u %a %b %e %H:%M:%S %z %Y - Fri Apr 28 17:25:57 EDT 1995
%g %a, %d %b %Y %H:%M:%S %z - Fri, 28 Apr 1995 17:23:15 EDT
%D %m/%d/%y - 04/28/95
%x %m/%d/%y or %d/%m/%y - 04/28/95 or 28/04/28
(Depends on DateFormat variable)
%l date in ls(1) format (see NOTE 1 below)
%b %e $H:$M - Apr 28 17:23 (if within 6 months)
%b %e %Y - Apr 28 1993 (otherwise)
%r %I:%M:%S %p - 05:39:55 PM
%R %H:%M - 17:40
%T,%X %H:%M:%S - 17:40:58
%V %m%d%H%M%y - 0428174095
%Q %Y%m%d - 19961025
%q %Y%m%d%H%M%S - 19961025174058
%P %Y%m%d%H%M%S - 1996102517:40:58
%O %Y-%m-%dT%H:%M:%S - 1996-10-25T17:40:58
%F %A, %B %e, %Y - Sunday, January 1, 1996
%K %Y-%j - 1997-045
Special Year/Week formats (see NOTE 2 below)
%G year, Monday as first
day of week - 0001 to 9999
%W week of year, Monday
as first day of week - 01 to 53
%L year, Sunday as first
day of week - 0001 to 9999
%U week of year, Sunday
as first day of week - 01 to 53
%J %G-W%W-%w - 1997-W02-2
Other formats
%n insert a newline character
%t insert a tab character
%% insert a `%' character
%+ insert a `+' character
The following formats are currently unused but may be used in the future:
N 1234567890 !@#$^&*()_|-=\`[];',./~{}:<>?
They currently insert the character following the %, but may (and probably
will) change in the future as new formats are added.
If a lone percent is the final character in a format, it is ignored.
The formats used in this routine were originally based on date.pl (version 3.2) by Terry McGonigal,
as well as a couple taken from different versions of the Solaris date(1) command. Also, several have
been added which are unique to Date::Manip.
NOTE 1:
The ls format (%l) applies to date within the past OR future 6 months!
NOTE 2:
The %U, %W, %L, %G, and %J formats are used to support the ISO-8601 format: YYYY-wWW-D. In this
format, a date is written as a year, the week of the year, and the day of the week. Technically, the
week may be considered to start on any day of the week, but Sunday and Monday are the both common
choices, so both are supported.
The %W and %G formats return the week-of-year and the year treating weeks as starting on Monday.
The %U and %L formats return the week-of-year and the year treating weeks as starting on Sunday.
Most of the time, the %L and %G formats returns the same value as the %Y format, but there is a
problem with days occurring in the first or last week of the year.
The ISO-8601 representation of Jan 1, 1993 written in the YYYY-wWW-D format is actually 1992-W53-5.
In other words, Jan 1 is treated as being in the last week of the preceding year. Depending on the
year, days in the first week of a year may belong to the previous year, and days in the final week of
a year may belong to the next year. The week is assigned to the year which has most of the days.
For example, if the week starts on Sunday, then the last week of 2003 is 2003-12-28 to 2004-01-03.
This week is assigned to 2003 since 4 of the days in it are in 2003 and only 3 of them are in 2004.
The first week of 2004 starts on 2004-01-04.
The %U and %W formats return a week-of-year number from 01 to 53. %L and %G return the corresponding
year, and to get this type of information, you should always use the (%W,%G) combination or (%U,%L)
combination. %Y should not be used as it will yield incorrect results.
%J returns the full ISO-8601 format (%G-W%W-%w).
NOTE 3:
The %s and %o formats return negative values if the date is before the start of the epoch. Other
Unix utilities would return an error, or a zero, so if you are going to use Date::Manip in
conjunction with these, be sure to check for a negative value.
ParseDateDelta
$delta = ParseDateDelta(\@args);
$delta = ParseDateDelta($string);
$delta = ParseDateDelta(\$string);
This takes an array and shifts a valid delta date (an amount of time) from the array. Recognized
deltas are of the form:
+Yy +Mm +Ww +Dd +Hh +MNmn +Ss
examples:
+4 hours +3mn -2second
+ 4 hr 3 minutes -2
4 hour + 3 min -2 s
+Y:+M:+W:+D:+H:+MN:+S
examples:
0:0:0:0:4:3:-2
+4:3:-2
mixed format
examples:
4 hour 3:-2
A field in the format +Yy is a sign, a number, and a string specifying the type of field. The sign
is "+", "-", or absent (defaults to the next larger element). The valid strings specifying the field
type are:
y: y, yr, year, years
m: m, mon, month, months
w: w, wk, ws, wks, week, weeks
d: d, day, days
h: h, hr, hour, hours
mn: mn, min, minute, minutes
s: s, sec, second, seconds
Also, the "s" string may be omitted. The sign, number, and string may all be separated from each
other by any number of whitespace.
In the date, all fields must be given in the order: Y M W D H MN S. Any number of them may be
omitted provided the rest remain in the correct order. In the 2nd (colon) format, from 2 to 7 of the
fields may be given. For example +D:+H:+MN:+S may be given to specify only four of the fields. In
any case, both the MN and S field may be present. No spaces may be present in the colon format.
Deltas may also be given as a combination of the two formats. For example, the following is valid:
+Yy +D:+H:+MN:+S. Again, all fields must be given in the correct order.
The word "in" may be given (prepended in English) to the delta ("in 5 years") and the word "ago" may
be given (appended in English) ("6 months ago"). The "in" is completely ignored. The "ago" has the
affect of reversing all signs that appear in front of the components of the delta. I.e. "-12 yr 6
mon ago" is identical to "+12yr +6mon" (don't forget that there is an implied minus sign in front of
the 6 because when no sign is explicitly given, it carries the previously entered sign).
One thing is worth noting. The year/month and day/hour/min/sec parts are returned in a "normalized"
form. That is, the signs are adjusted so as to be all positive or all negative. For example, "+ 2
day - 2hour" does not return "0:0:0:2:-2:0:0". It returns "+0:0:0:1:22:0:0" (1 day 22 hours which is
equivalent). I find (and I think most others agree) that this is a more useful form.
Since the year/month and day/hour/min/sec parts must be normalized separately there is the
possibility that the sign of the two parts will be different. So, the delta "+ 2years -10 months - 2
days + 2 hours" produces the delta "+1:2:-0:1:22:0:0".
It is possible to include a sign for all elements that is output. See the configuration variable
DeltaSigns below.
NOTE: The internal format of the delta changed in version 5.30 from Y:M:D:H:MN:S to Y:M:W:D:H:MN:S .
Also, it is going to change again at some point in the future to Y:M:W:D:H:MN:S*FLAGS . Use the
routine Delta_Format to extract information rather than parsing it yourself.
Delta_Format
@str = Delta_Format($delta [,$mode], $dec,@format);
$str = Delta_Format($delta [,$mode], $dec,@format);
This is similar to the UnixDate routine except that it extracts information from a delta. Unlike the
UnixDate routine, most of the formats are 2 characters instead of 1.
Formats currently understood are:
%Xv : the value of the field named X
%Xd : the value of the field X, and all smaller fields, expressed in
units of X
%Xh : the value of field X, and all larger fields, expressed in units
of X
%Xt : the value of all fields expressed in units of X
X is one of y,M,w,d,h,m,s (case sensitive).
%% : returns a "%"
So, the format "%hd" means the values of H, MN, and S expressed in hours. So for the delta
"0:0:0:0:2:30:0", this format returns 2.5.
Delta_Format can operate in two modes: exact and approximate. The exact mode is done by default.
Approximate mode can be done by passing in the string "approx" as the 2nd argument.
In exact mode, Delta_Format only understands "exact" relationships. This means that there can be no
mixing of the Y/M and W/D/H/MN/S segments because the relationship because, depending on when the
delta occurs, there is no exact relation between the number of years or months and the number of
days.
The two sections are treated completely separate from each other. So, the delta "1:6:1:2:12:0:0"
would return the following values:
%yt = 1.5 (1 year, 6 months)
%Mt = 18
%dt = 9.5 (1 week, 2 days, 12 hours)
In approximate mode, the relationship of 1 year = 365.25 days is applied (with 1 month equal to 1/12
of a year exactly). So the delta "1:6:1:2:12:0:0" would return the following values:
%dt = 557.375 (1.5 years of 365.25 days + 9.5 days)
If $dec is non-zero, the %Xd and %Xt values are formatted to contain $dec decimal places.
ParseRecur
$recur = ParseRecur($string [,$base,$date0,$date1,$flags]);
@dates = ParseRecur($string [,$base,$date0,$date1,$flags]);
A recurrence refers to a recurring event, and more specifically, an event which occurs on a regular
basis. A fully specified recurring event may requires up to four pieces of information.
First, it requires a description of the frequency of the event. Examples include "the first of every
month", "every other day", "the 4th Thursday of each month at 2:00 PM", and "every 2 hours and 30
minutes".
Second, it may require a base date to work from. This piece of information is not required for every
type of recurrence. For example, if the frequency is "the first of every month", no base date is
required. All the information about when the event occurs is included in the frequency description.
If the frequency were "every other day" though, you need to know at least one day on which the event
occurred.
Third, the recurring event may have a range (a starting and ending date).
Fourth, there may be some flags included which modify the behavior of the above information.
The fully specified recurrence is written as these 5 pieces of information (both a start and end
date) as an asterisk separated list:
freq*flags*base*date0*date1
Here, base, date0, and date1 are any strings (which must not contain any asterisks) which can be
parsed by ParseDate. flags is a comma separated list of flags (described below), and freq is a
string describing the frequency of the recurring event.
The syntax of the frequency description is a colon separated list of the format Y:M:W:D:H:MN:S (which
stand for year, month, week, etc.). One (and only one) of the colons may optionally be replaced by
an asterisk, or an asterisk may be prepended to the string. For example, the following are all valid
frequency descriptions:
1:2:3:4:5:6:7
1:2*3:4:5:6:7
*1:2:3:4:5:6:7
But the following are NOT valid because they contain 2 or more asterisks:
1:2*3:4:5*6:7
1*2*3:4:5*6:7
*1:2:3:4:5:6*7
If an asterisk is included, values to the left of it refer to the number of times that time interval
occurs between recurring events. For example, if the first part of the recurrence is:
1:2*
this says that the recurring event occurs approximately every 1 year and 2 months. I say
approximately, because elements to the right of the asterisk, as well as any flags included in the
recurrence will affect when the actual events occur.
If no asterisks are included, then the entire recurrence is of this form. For example,
0:0:0:1:12:0:0
refers to an event that occurs every 1 day, 12 hours.
Values that occur after an asterisk refer to a specific value for that type of time element (i.e.
exactly as it would appear on a calendar or a clock). For example, if the recurrence ends with:
*12:0:0
then the recurring event occurs at 12:00:00 (noon).
For example:
0:0:2:1:0:0:0 every 2 weeks and 1 day
0:0:0:0:5:30:0 every 5 hours and 30 minutes
0:0:0:2*12:30:0 every 2 days at 12:30 (each day)
Values to the right of the asterisk can be listed a single values, ranges (2 numbers separated by a
dash "-"), or a comma separated list of values or ranges. In most cases, negative values are
appropriate for the week or day values. -1 stands for the last possible value, -2 for the second to
the last, etc.
Some examples are:
0:0:0:1*2,4,6:0:0 every day at at 2:00, 4:00, and 6:00
0:0:0:2*12-13:0,30:0 every other day at 12:00, 12:30, 13:00,
and 13:30
0:1:0*-1:0:0:0 the last day of every month
*1990-1995:12:0:1:0:0:0
Dec 1 in 1990 through 1995
There is no way to express the following with a single recurrence:
every day at 12:30 and 1:00
You have to use two recurrences to do this.
When a non-zero day element occurs to the right of the asterisk, it can take on multiple meanings,
depending on the value of the month and week elements. It can refer to the day of the week, day of
the month, or day of the year. Similarly, if a non-zero week element occurs to the right of the
asterisk, it actually refers to the nth time a certain day of the week occurs, either in the month or
in the year.
If the week element is non-zero and the day element is non-zero (and to the right of the asterisk),
the day element refers to the day of the week. It can be any value from 1 to 7 (negative values -1 to
-7 are also allowed). If you use the ISO 8601 convention, the first day of the week is Monday (though
Date::Manip can use any day as the start of the week by setting the FirstDay config variable). So,
assuming that you are using the ISO 8601 convention, the following examples illustrate day-of-week
recurrences:
0:1*4:2:0:0:0 4th Tuesday (day 2) of every month
0:1*-1:2:0:0:0 last Tuesday of every month
0:0:3*2:0:0:0 every 3rd Tuesday (every 3 weeks
on 2nd day of week)
1:0*12:2:0:0:0 the 12th Tuesday of each year
If the week element is non-zero, and the day element is zero, the day defaults to 1 (i.e. the first
day of the week).
0:1*2:0:0:0:0 the 2nd occurrence of FirstDay
in the year (typically Monday)
0:1*2:1:0:0:0 the same
If the week element is zero and the month element is non-zero, the day value is the day of the month
(it can be from 1 to 31 or -1 to -31 counting from the end of the month). If a value of 0 is given,
it defaults to 1.
3*1:0:2:12:0:0 every 3 years on Jan 2 at noon
0:1*0:2:12,14:0:0 2nd of every month at 12:00 and 14:00
0:1:0*-2:0:0:0 2nd to last day of every month
If the day given refers to the 29th, 30th, or 31st, in a month that does not have that number of
days, it is ignored. For example, if you ask for the 31st of every month, it will return dates in
Jan, Mar, May, Jul, etc. Months with fewer than 31 days will be ignored.
If both the month and week elements are zero, and the year element is non-zero, the day value is the
day of the year (1 to 365 or 366 -- or the negative numbers to count backwards from the end of the
year).
1:0:0*45:0:0:0 45th day of every year
Specifying a day that doesn't occur in that year silently ignores that year. The only result of this
is that specifying +366 or -366 will ignore all years except leap years.
I realize that this looks a bit cryptic, but after a discussion on the CALENDAR mailing list, it
appeared like there was no concise, flexible notation for handling recurring events. ISO 8601
notations were very bulky and lacked the flexibility I wanted. As a result, I developed this
notation (based on crontab formats, but with much more flexibility) which fits in well with this
module. Even better, it is able to express every type of recurring event I could think of that is
used in common life in (what I believe to be) a very concise and elegant way.
If ParseRecur is called in scalar context, it returns a string containing a fully specified
recurrence (or as much of it as can be determined with unspecified fields left blank). In list
context, it returns a list of all dates referred to by a recurrence if enough information is given in
the recurrence. All dates returned are in the range:
date0 <= date < date1
The argument $string can contain any of the parts of a full recurrence. For example:
freq
freq*flags
freq**base*date0*date1
The only part which is required is the frequency description. Any values contained in $string are
overridden or modified by values passed in as parameters to ParseRecur.
NOTE: If a recurrence has a date0 and date1 in it AND a date0 and date1 are passed in to the
function, both sets of criteria apply. If flags are passed in, they override any flags in the
recurrence UNLESS the flags passed in start with a plus (+) character in which case they are appended
to the flags in the recurrence.
NOTE: Base dates are only used with some types of recurrences. For example,
0:0:3*2:0:0:0 every 3rd Tuesday
requires a base date. If a base date is specified which doesn't match the criteria (for example, if
a base date falling on Monday were passed in with this recurrence), the base date is moved forward to
the first relevant date.
Other dates do not require a base date. For example:
0:0*3:2:0:0:0 third Tuesday of every month
A recurrence written in the above format does NOT provide default values for base, date0, or date1.
They must be specified in order to get a list of dates.
A base date is not used entirely. It is only used to provide the parts necessary for the left part
of a recurrence. For example, the recurrence:
1:3*0:4:0:0:0 every 1 year, 3 months on the 4th day of the month
would only use the year and month of the base date.
There are a small handful of English strings which can be parsed in place of a numerical recur
description. These include:
every 2nd day [in 1997]
every 2nd day in June [1997]
2nd day of every month [in 1997]
2nd Tuesday of every month [in 1997]
last Tuesday of every month [in 1997]
every Tuesday [in 1997]
every 2nd Tuesday [in 1997]
every 2nd Tuesday in June [1997]
Each of these set base, date0, and date1 to a default value (the current year with Jan 1 being the
base date is the default if the year and month are missing).
The following flags (case insensitive) are understood:
PDn : n is 1-7. Means the previous day n not counting today
PTn : n is 1-7. Means the previous day n counting today
NDn : n is 1-7. Means the next day n not counting today
NTn : n is 1-7. Means the next day n counting today
FDn : n is any number. Means step forward n days.
BDn : n is any number. Means step backward n days.
FWn : n is any number. Means step forward n workdays.
BWn : n is any number. Means step backward n workdays.
CWD : the closest work day (using the TomorrowFirst config variable).
CWN : the closest work day (looking forward first).
CWP : the closest work day (looking backward first).
NWD : next work day counting today
PWD : previous work day counting today
DWD : next/previous work day (TomorrowFirst config) counting today
EASTER: select easter for this year (the M, W, D fields are ignored
in the recur).
CWD, CWN, and CWP will usually return the same value, but if you are starting at the middle day of a
3-day weekend (for example), it will return either the first work day of the following week, or the
last work day of the previous week depending on whether it looks forward or backward first.
All flags are applied AFTER the recurrence dates are calculated, and they may move a date outside of
the date0 to date1 range. No check is made for this.
The workday flags do not act exactly the same as a business mode calculation. For example, a date
that is Saturday with a FW1 steps forward to the first workday (i.e. Monday).
Date_Cmp
$flag = Date_Cmp($date1,$date2);
This takes two dates and compares them. Almost all dates can be compared using the Perl "cmp"
command. The only time this will not work is when comparing dates in different time zones. This
routine will take that into account.
NOTE: This routine currently does little more than use "cmp", but once the internal format for
storing dates is in place (where time zone information is kept as part of the date), this routine
will become more important. You should use this routine in preparation for that version.
DateCalc
$d = DateCalc($d1,$d2 [,\$err] [,$mode]);
This takes two dates, deltas, or one of each and performs the appropriate calculation with them.
Dates must be a string that can be parsed by ParseDateString. Deltas must be a string that can be
parsed by ParseDateDelta. Two deltas add together to form a third delta. A date and a delta returns
a 2nd date. Two dates return a delta (the difference between the two dates).
Since the two items can be interpreted as either dates or deltas, and since many types of dates can
be interpreted as deltas (and vice versa), it is a good idea to pass the input through ParseDate or
ParseDateDelta as appropriate. For example, the string "09:00:00" can be interpreted either as a date
(today at 9:00:00) or a delta (9 hours). To avoid unexpected results, avoid calling DateCalc as:
$d = DateCalc("09:00:00",$someothervalue);
Instead, call it as:
$d = DateCalc(ParseDate("09:00:00"),$someothervalue);
to force it to be a date, or:
$d = DateCalc(ParseDateDelta("09:00:00"),$someothervalue);
to force it to be a delta. This will avoid unexpected results.
Note that in many cases, it is somewhat ambiguous what the delta actually refers to. Although it is
ALWAYS known how many months in a year, hours in a day, etc., it is NOT known (in the generals case)
how many days are in a month. As a result, the part of the delta containing month/year and the part
with sec/min/hr/day must be treated separately. For example, "Mar 31, 12:00:00" plus a delta of
1month 2days would yield "May 2 12:00:00". The year/month is first handled while keeping the same
date. Mar 31 plus one month is Apr 31 (but since Apr only has 30 days, it becomes Apr 30). Apr 30 +
2 days is May 2. As a result, in the case where two dates are entered, the resulting delta can take
on two different forms. By default ($mode=0), an absolutely correct delta (ignoring daylight saving
time) is returned in weeks, days, hours, minutes, and seconds.
If $mode is 1, the math is done using an approximate mode where a delta is returned using years and
months as well. The year and month part is calculated first followed by the rest. For example, the
two dates "Mar 12 1995" and "Apr 13 1995" would have an exact delta of "31 days" but in the
approximate mode, it would be returned as "1 month 1 day". Also, "Mar 31" and "Apr 30" would have
deltas of "30 days" or "1 month" (since Apr 31 doesn't exist, it drops down to Apr 30). Approximate
mode is a more human way of looking at things (you'd say 1 month and 2 days more often then 33 days),
but it is less meaningful in terms of absolute time. In approximate mode $d1 and $d2 must be dates.
If either or both is a delta, the calculation is done in exact mode.
If $mode is 2, a business mode is used. That is, the calculation is done using business days,
ignoring holidays, weekends, etc. In order to correctly use this mode, a config file must exist
which contains the section defining holidays (see documentation on the config file below). The
config file can also define the work week and the hours of the work day, so it is possible to have
different config files for different businesses.
For example, if a config file defines the workday as 08:00 to 18:00, a work week consisting of Mon-
Sat, and the standard (American) holidays, then from Tuesday at 12:00 to the following Monday at
14:00 is 5 days and 2 hours. If the "end" of the day is reached in a calculation, it automatically
switches to the next day. So, Tuesday at 12:00 plus 6 hours is Wednesday at 08:00 (provided Wed is
not a holiday). Also, a date that is not during a workday automatically becomes the start of the
next workday. So, Sunday 12:00 and Monday at 03:00 both automatically becomes Monday at 08:00
(provided Monday is not a holiday). In business mode, any combination of date and delta may be
entered, but a delta should not contain a year or month field (weeks are fine though).
See Date::Manip::Calc for some additional comments about business mode calculations.
Note that a business week is treated the same as an exact week (i.e. from Tuesday to Tuesday,
regardless of holidays). Because this means that the relationship between days and weeks is NOT
unambiguous, when a delta is produced from two dates, it will be in terms of d/h/mn/s (i.e. no week
field).
If $mode is 3 (which only applies when two dates are passed in), an exact business mode is used. In
this case, it returns a delta as an exact number of business days/hours/etc. between the two. Weeks,
months, and years are ignored.
Any other non-nil value of $mode is treated as $mode=1 (approximate mode).
The mode can be automatically set in the dates/deltas passed by including a key word somewhere in it.
For example, in English, if the word "approximately" is found in either of the date/delta arguments,
approximate mode is forced. Likewise, if the word "business" or "exactly" appears, business/exact
mode is forced (and $mode is ignored). So, the two following are equivalent:
$date = DateCalc("today","+ 2 business days",\$err);
$date = DateCalc("today","+ 2 days",\$err,2);
Note that if the keyword method is used instead of passing in $mode, it is important that the keyword
actually appear in the argument passed in to DateCalc. The following will NOT work:
$delta = ParseDateDelta("+ 2 business days");
$today = ParseDate("today");
$date = DateCalc($today,$delta,\$err);
because the mode keyword is removed from a date/delta by the parse routines, and the mode is reset
each time a parse routine is called. Since DateCalc parses both of its arguments, whatever mode was
previously set is ignored.
If \$err is passed in, it is set to:
1 is returned if $d1 is not a delta or date
2 is returned if $d2 is not a delta or date
3 is returned if the date is outside the years 1000 to 9999 This argument is optional, but if
included, it must come before $mode.
Nothing is returned if an error occurs.
When a delta is returned, the signs such that it is strictly positive or strictly negative ("1 day -
2 hours" would never be returned for example). The only time when this cannot be enforced is when
two deltas with a year/month component are entered. In this case, only the signs on the
day/hour/min/sec part are standardized.
Date_SetTime
$date = Date_SetTime($date,$hr,$min,$sec);
$date = Date_SetTime($date,$time);
This takes a date (any string that may be parsed by ParseDateString) and sets the time in that date.
For example, one way to get the time for 7:30 tomorrow would be to use the lines:
$date = ParseDate("tomorrow");
$date = Date_SetTime($date,"7:30");
Note that in this routine (as well as the other routines below which use a time argument), no real
parsing is done on the times. As a result,
$date = Date_SetTime($date,"13:30");
works, but
$date = Date_SetTime($date,"1:30 PM");
doesn't.
Date_SetDateField
$date = Date_SetDateField($date,$field,$val [,$nocheck]);
This takes a date and sets one of its fields to a new value. $field is any of the strings "y", "m",
"d", "h", "mn", "s" (case insensitive) and $val is the new value.
If $nocheck is non-zero, no check is made as to the validity of the date.
Date_GetPrev
$date = Date_GetPrev($date,$dow, $curr [,$hr,$min,$sec]);
$date = Date_GetPrev($date,$dow, $curr [,$time]);
$date = Date_GetPrev($date,undef,$curr,$hr,$min,$sec);
$date = Date_GetPrev($date,undef,$curr,$time);
This takes a date (any string that may be parsed by ParseDateString) and finds the previous
occurrence of either a day of the week, or a certain time of day.
If $dow is defined, the previous occurrence of the day of week is returned. $dow may either be a
string (such as "Fri" or "Friday") or a number (between 1 and 7). The date of the previous $dow is
returned.
If $date falls on the day of week given by $dow, the date returned depends on $curr. If $curr is 0,
the date returned is a week before $date. If $curr is 1, the date returned is the same as $date. If
$curr is 2, the date returned (including the time information) is required to be before $date.
If a time is passed in (either as separate hours, minutes, seconds or as a time in HH:MM:SS or HH:MM
format), the time on this date is set to it. The following examples should illustrate the use of
Date_GetPrev:
date dow curr time returns
Fri Nov 22 18:15:00 Thu any 12:30 Thu Nov 21 12:30:00
Fri Nov 22 18:15:00 Fri 0 12:30 Fri Nov 15 12:30:00
Fri Nov 22 18:15:00 Fri 1/2 12:30 Fri Nov 22 12:30:00
Fri Nov 22 18:15:00 Fri 1 18:30 Fri Nov 22 18:30:00
Fri Nov 22 18:15:00 Fri 2 18:30 Fri Nov 15 18:30:00
If $dow is undefined, then a time must be entered, and the date returned is the previous occurrence
of this time. If $curr is non-zero, the current time is returned if it matches the criteria passed
in. In other words, the time returned is the last time that a digital clock (in 24 hour mode) would
have displayed the time you passed in. If you define hours, minutes and seconds default to 0 and you
might jump back as much as an entire day. If hours are undefined, you are looking for the last time
the minutes/seconds appeared on the digital clock, so at most, the time will jump back one hour.
date curr hr min sec returns
Nov 22 18:15:00 0/1 18 undef undef Nov 22 18:00:00
Nov 22 18:15:00 0/1 18 30 0 Nov 21 18:30:00
Nov 22 18:15:00 0 18 15 undef Nov 21 18:15:00
Nov 22 18:15:00 1 18 15 undef Nov 22 18:15:00
Nov 22 18:15:00 0 undef 15 undef Nov 22 17:15:00
Nov 22 18:15:00 1 undef 15 undef Nov 22 18:15:00
Date_GetNext
$date = Date_GetNext($date,$dow, $curr [,$hr,$min,$sec]);
$date = Date_GetNext($date,$dow, $curr [,$time]);
$date = Date_GetNext($date,undef,$curr,$hr,$min,$sec);
$date = Date_GetNext($date,undef,$curr,$time);
Similar to Date_GetPrev.
Date_IsHoliday
$name = Date_IsHoliday($date);
This returns undef if $date is not a holiday, or a string containing the name of the holiday
otherwise. An empty string is returned for an unnamed holiday.
Events_List
$ref = Events_List($date);
$ref = Events_List($date ,0 [,$flag]);
$ref = Events_List($date0,$date1 [,$flag]);
This returns a list of events. Events are defined in the Events section of the config file
(discussed below).
In the first form (a single argument), $date is any string containing a date. A list of events
active at that precise time will be returned. The format is similar to when $flag=0, except only a
single time will be returned.
In all other cases, a range of times will be used. If the 2nd argument evaluates to 0, the range of
times will be the 24 hour period from midnight to midnight containing $date. Otherwise, the range is
given by the two dates.
The value of $flag determines the format of the information that is returned.
With $flag=0, the events are returned as a reference to a list of the form:
[ date, [ list_of_events ], date, [ list_of_events ], ... ]
For example, if the following events are defined (using the syntax discussed below in the description
of the Event section of the config file):
2000-01-01 ; 2000-03-21 = Winter
2000-03-22 ; 2000-06-21 = Spring
2000-02-01 = Event1
2000-05-01 = Event2
2000-04-01-12:00:00 = Event3
might result in the following output:
Events_List("2000-04-01")
=> [ 2000040100:00:00, [ Spring ] ]
Events_List("2000-04-01 12:30");
=> [ 2000040112:30:00, [ Spring, Event3 ] ]
Events_List("2000-04-01",0);
=> [ 2000040100:00:00, [ Spring ],
2000040112:00:00, [ Spring, Event3 ],
2000040113:00:00, [ Spring ] ]
Events_List("2000-03-15","2000-04-10");
=> [ 2000031500:00:00, [ Winter ],
2000032200:00:00, [ Spring ]
2000040112:00:00, [ Spring, Event3 ]
2000040113:00:00, [ Spring ] ]
Much more complicated events can be defined using recurrences.
When $flag is non-zero, the format of the output is changed. If $flag is 1, then a tally of the
amount of time given to each event is returned. Time for which two or more events apply is counted
for both.
Events_List("2000-03-15","2000-04-10",1);
=> { Winter => +0:0:1:0:0:0:0,
Spring => +0:0:2:5:0:0:0,
Event3 => +0:0:0:0:1:0:0 }
When $flag is 2, a more complex tally with no event counted twice is returned.
Events_List("2000-03-15","2000-04-10",2);
=> { Winter => +0:0:1:0:0:0:0,
Spring => +0:0:2:4:23:0:0,
Event3+Spring => +0:0:0:0:1:0:0 }
The hash contains one element for each combination of events.
Date_DayOfWeek
$day = Date_DayOfWeek($m,$d,$y);
Returns the day of the week (1 for Monday, 7 for Sunday).
All arguments must be numeric.
Date_SecsSince1970
$secs = Date_SecsSince1970($m,$d,$y,$h,$mn,$s);
Returns the number of seconds since Jan 1, 1970 00:00 (negative if date is earlier).
All arguments must be numeric.
Date_SecsSince1970GMT
$secs = Date_SecsSince1970GMT($m,$d,$y,$h,$mn,$s);
Returns the number of seconds since Jan 1, 1970 00:00 GMT (negative if date is earlier). If CurrTZ
is "IGNORE", the number will be identical to Date_SecsSince1970 (i.e. the date given will be treated
as being in GMT).
All arguments must be numeric.
Date_DaysSince1BC
$days = Date_DaysSince1BC($m,$d,$y);
Returns the number of days since Dec 31, 1BC. This includes the year 0000.
All arguments must be numeric.
Date_DayOfYear
$day = Date_DayOfYear($m,$d,$y);
Returns the day of the year (001 to 366)
All arguments must be numeric.
Date_NthDayOfYear
($y,$m,$d,$h,$mn,$s) = Date_NthDayOfYear($y,$n);
Returns the year, month, day, hour, minutes, and decimal seconds given a floating point day of the
year.
All arguments must be numeric. $n must be greater than or equal to 1 and less than 366 on non-leap
years and 367 on leap years.
NOTE: When $n is a decimal number, the results are non-intuitive perhaps. Day 1 is Jan 01 00:00.
Day 2 is Jan 02 00:00. Intuitively, you might think of day 1.5 as being 1.5 days after Jan 01 00:00,
but this would mean that Day 1.5 was Jan 02 12:00 (which is later than Day 2). The best way to think
of this function is a time line starting at 1 and ending at 366 (in a non-leap year). In terms of a
delta, think of $n as the number of days after Dec 31 00:00 of the previous year.
Date_DaysInYear
$days = Date_DaysInYear($y);
Returns the number of days in the year (365 or 366)
Date_DaysInMonth
$days = Date_DaysInMonth($m,$y);
Returns the number of days in the month.
Date_WeekOfYear
$wkno = Date_WeekOfYear($m,$d,$y,$first);
Figure out week number. $first is the first day of the week which is usually 1 (Monday) or 7
(Sunday), but could be any number between 1 and 7 in practice.
All arguments must be numeric.
NOTE: This routine should only be called in rare cases. Use UnixDate with the %W, %U, %J, %L formats
instead. This routine returns a week between 0 and 53 which must then be "fixed" to get into the
ISO-8601 weeks from 1 to 53. A date which returns a week of 0 actually belongs to the last week of
the previous year. A date which returns a week of 53 may belong to the first week of the next year.
Date_LeapYear
$flag = Date_LeapYear($y);
Returns 1 if the argument is a leap year Written by David Muir Sharnoff <muir@idiom.com>
Date_DaySuffix
$day = Date_DaySuffix($d);
Add `st', `nd', `rd', `th' to a date (i.e. 1st, 22nd, 29th). Works for international dates.
Date_TimeZone
$tz = Date_TimeZone;
This determines and returns the local time zone. If it is unable to determine the local time zone,
the following error occurs:
ERROR: Date::Manip unable to determine Time Zone.
See The TIME ZONES section below for more information.
Date_ConvTZ
$date = Date_ConvTZ($date);
$date = Date_ConvTZ($date,$from);
$date = Date_ConvTZ($date,"",$to [,$errlev]);
$date = Date_ConvTZ($date,$from,$to [,$errlev]);
This converts a date (which MUST be in the format returned by ParseDate) from one time zone to
another.
If it is called with no arguments, the date is converted from the local time zone to the time zone
specified by the config variable ConvTZ (see documentation on ConvTZ below). If ConvTZ is set to
"IGNORE", no conversion is done.
If called with $from but no $to, the time zone is converted from the time zone in $from to ConvTZ (of
TZ if ConvTZ is not set). Again, no conversion is done if ConvTZ is set to "IGNORE".
If called with $to but no $from, $from defaults to ConvTZ (if set) or the local time zone otherwise.
Although this does not seem immediately obvious, it actually makes sense. By default, all dates that
are parsed are converted to ConvTZ, so most of the dates being worked with will be stored in that
time zone.
If Date_ConvTZ is called with both $from and $to, the date is converted from the time zone $from to
$to.
NOTE: As in all other cases, the $date returned from Date_ConvTZ has no time zone information
included as part of it, so calling UnixDate with the "%z" format will return the time zone that
Date::Manip is working in (usually the local time zone).
Example: To convert 2/2/96 noon PST to CST (regardless of what time zone you are in, do the
following:
$date = ParseDate("2/2/96 noon");
$date = Date_ConvTZ($date,"PST","CST");
Both time zones MUST be in one of the formats listed below in the section TIME ZONES.
If an error occurs, $errlev determines what happens:
0 : the program dies
1 : a warning is produced and nothing is returned
2 : the function silently returns nothing
Date_IsWorkDay
$flag = Date_IsWorkDay($date [,$flag]);
This returns 1 if $date is a work day. If $flag is non-zero, the time is checked to see if it falls
within work hours. It returns an empty string if $date is not valid.
Date_NextWorkDay
$date = Date_NextWorkDay($date,$off [,$flag]);
Finds the day $off work days from now. If $flag is non-zero, we must also take into account the time
of day.
If $flag is zero, day 0 is today (if today is a workday) or the next work day if it isn't. In any
case, the time of day is unaffected.
If $flag is non-zero, day 0 is now (if now is part of a workday) or the start of the very next work
day.
Date_PrevWorkDay
$date = Date_PrevWorkDay($date,$off [,$flag]);
Similar to Date_NextWorkDay.
Date_NearestWorkDay
$date = Date_NearestWorkDay($date [,$tomorrowfirst]);
This looks for the work day nearest to $date. If $date is a work day, it is returned. Otherwise, it
will look forward or backwards in time 1 day at a time until a work day is found. If $tomorrowfirst
is non-zero (or if it is omitted and the config variable TomorrowFirst is non-zero), we look to the
future first. Otherwise, we look in the past first. In other words, in a normal week, if $date is
Wednesday, $date is returned. If $date is Saturday, Friday is returned. If $date is Sunday, Monday
is returned. If Wednesday is a holiday, Thursday is returned if $tomorrowfirst is non-nil or Tuesday
otherwise.
DateManipVersion
$version = DateManipVersion;
Returns the version of Date::Manip.
TIME ZONES
With the release of Date::Manip 6.00, time zones and daylight saving time are now fully supported in
Date::Manip. 6.00 uses information from several standards (most importantly the Olson zoneinfo database)
to get a list of all known time zones.
Unfortunately, 6.00 requires a newer version of perl, so I will continue to support the 5.xx release for
a while. However, the way I will support time zones in 5.xx has changed. Previously, new time zones would
be added on request. That is no longer the case. Time zones for 5.xx are now generated automatically from
those available in 6.00.
The following time zone names are currently understood (and can be used in parsing dates). These are
zones defined in RFC 822.
Universal: GMT, UT
US zones : EST, EDT, CST, CDT, MST, MDT, PST, PDT
Military : A to Z (except J)
Other : +HHMM or -HHMM
ISO 8601 : +HH:MM, +HH, -HH:MM, -HH
In addition, the following time zone abbreviations are also accepted. These do not come from a standard,
but were included in previous releases of Date::Manip 5.xx and are preserved here for backward
compatibility:
IDLW -1200 International Date Line West
NT -1100 Nome
SAT -0400 Chile
CLDT -0300 Chile Daylight
AT -0200 Azores
MEWT +0100 Middle European Winter
MEZ +0100 Middle European
FWT +0100 French Winter
GB +0100 GMT with daylight savings
SWT +0100 Swedish Winter
MESZ +0200 Middle European Summer
FST +0200 French Summer
METDST +0200 An alias for MEST used by HP-UX
EETDST +0300 An alias for eest used by HP-UX
EETEDT +0300 Eastern Europe, USSR Zone 1
BT +0300 Baghdad, USSR Zone 2
IT +0330 Iran
ZP4 +0400 USSR Zone 3
ZP5 +0500 USSR Zone 4
IST +0530 Indian Standard
ZP6 +0600 USSR Zone 5
AWST +0800 Australian Western Standard
ROK +0900 Republic of Korea
AEST +1000 Australian Eastern Standard
ACDT +1030 Australian Central Daylight
CADT +1030 Central Australian Daylight
AEDT +1100 Australian Eastern Daylight
EADT +1100 Eastern Australian Daylight
NZT +1200 New Zealand
IDLE +1200 International Date Line East
All other time zone abbreviations come from the standards. In many cases, an abbreviation may be used for
multiple time zones. For example, NST stands for Newfoundland Standard -0330 and North Sumatra +0630. In
these cases, only 1 of the two is available. I have tried to use the most recent definition, and of those
(if multiple time zones use the abbreviation), the most commonly used. I don't claim that I'm correct in
all cases, but I've done the best I could.
The list of abbreviations available is documented in the Date::Manip::DM5abbrevs document.
Date::Manip must be able to determine the time zone the user is in. It does this by looking in the
following places:
$Date::Manip::TZ (set with Date_Init or in Manip.pm)
$ENV{TZ}
the Unix `date` command (if available)
$main::TZ
/etc/TIMEZONE
/etc/time zone
At least one of these should contain a time zone in one of the supported forms. If none do by default,
the TZ variable must be set with Date_Init.
The time zone may be in the STD#DST format (in which case both abbreviations must be in the table above)
or any of the formats described above. The STD#DST format is NOT available when parsing a date however.
The following forms are also available and are treated similar to the STD#DST forms:
US/Pacific
US/Mountain
US/Central
US/Eastern
Canada/Pacific
Canada/Mountain
Canada/Central
Canada/Eastern
CUSTOMIZING DATE::MANIP
There are a number of variables which can be used to customize the way Date::Manip behaves. There are
also several ways to set these variables.
At the top of the Manip.pm file, there is a section which contains all customization variables. These
provide the default values.
These can be overridden in a global config file if one is present (this file is optional). If the
GlobalCnf variable is set in the Manip.pm file, it contains the full path to a config file. If the file
exists, its values will override those set in the Manip.pm file. A sample config file is included with
the Date::Manip distribution. Modify it as appropriate and copy it to some appropriate directory and set
the GlobalCnf variable in the Manip.pm file.
Each user can have a personal config file which is of the same form as the global config file. The
variables PersonalCnf and PersonalCnfPath set the name and search path for the personal config file.
This file is also optional. If present, it overrides any values set in the global file.
NOTE: if you use business mode calculations, you must have a config file (either global or personal)
since this is the only place where you can define holidays.
Finally, any variables passed in through Date_Init override all other values.
A config file can be composed of several sections. The first section sets configuration variables.
Lines in this section are of the form:
VARIABLE = VALUE
For example, to make the default language French, include the line:
Language = French
Only variables described below may be used. Blank lines and lines beginning with a pound sign (#) are
ignored. All spaces are optional and strings are case insensitive.
A line which starts with an asterisk (*) designates a new section. For example, the HOLIDAY section
starts with a line:
*Holiday
The various sections are defined below.
DATE::MANIP VARIABLES
All Date::Manip variables which can be used are described in the following section.
IgnoreGlobalCnf
If this variable is used (any value is ignored), the global config file is not read. It must be
present in the initial call to Date_Init or the global config file will be read.
EraseHolidays
If this variable is used (any value is ignored), the current list of defined holidays is erased. A
new set will be set the next time a config file is read in. This can be set in either the global
config file or as a Date_Init argument (in which case holidays can be read in from both the global
and personal config files) or in the personal config file (in which case, only holidays in the
personal config file are counted).
PathSep
This is a regular expression used to separate multiple paths. For example, on Unix, it defaults to a
colon (:) so that multiple paths can be written PATH1:PATH2 . For Win32 platforms, it defaults to a
semicolon (;) so that paths such as "c:\;d:\" will work.
GlobalCnf
This variable can be passed into Date_Init to point to a global configuration file. The value must
be the complete path to a config file.
By default, no global config file is read. Any time a global config file is read, the holidays are
erased.
Paths may have a tilde (~) expansion on platforms where this is supported (currently Unix and VMS).
PersonalCnf
This variable can be passed into Date_Init or set in a global config file to set the name of the
personal configuration file.
The default name for the config file is .DateManip.cnf on all Unix platforms and Manip.cnf on all
non-Unix platforms (because some of them insist on 8.3 character filenames :-).
PersonalCnfPath
This is a list of paths separated by the separator specified by the PathSep variable. These paths
are each checked for the PersonalCnf config file.
Paths may have a tilde (~) expansion on platforms where this is supported (currently Unix and VMS).
Language
Date::Manip can be used to parse dates in many different languages. Currently, it is configured to
read the following languages (the version in which they added is included for historical interest):
English (default)
French (5.02)
Swedish (5.05)
German (5.31)
Dutch (5.32) aka Nederlands
Polish (5.32)
Spanish (5.33)
Portuguese (5.34)
Romanian (5.35)
Italian (5.35)
Russian (5.41)
Turkish (5.41)
Danish (5.41)
Others can be added easily. Language is set to the language used to parse dates. If you are
interested in providing a translation for a new language, email me (see the AUTHOR section below) and
I'll send you a list of things that I need.
DateFormat
Different countries look at the date 12/10 as Dec 10 or Oct 12. In the United States, the first is
most common, but this certainly doesn't hold true for other countries. Setting DateFormat to "US"
forces the first behavior (Dec 10). Setting DateFormat to anything else forces the second behavior
(Oct 12).
TZ If set, this defines the local time zone. See the TIME ZONES section above for information on its
format.
ConvTZ
All date comparisons and calculations must be done in a single time zone in order for them to work
correctly. So, when a date is parsed, it should be converted to a specific time zone. This allows
dates to easily be compared and manipulated as if they are all in a single time zone.
The ConvTZ variable determines which time zone should be used to store dates in. If it is left
blank, all dates are converted to the local time zone (see the TZ variable above). If it is set to
one of the time zones listed above, all dates are converted to this time zone. Finally, if it is set
to the string "IGNORE", all time zone information is ignored as the dates are read in (in this case,
the two dates "1/1/96 12:00 GMT" and "1/1/96 12:00 EST" would be treated as identical).
Internal
When a date is parsed using ParseDate, that date is stored in an internal format which is understood
by the Date::Manip routines UnixDate and DateCalc. Originally, the format used to store the date
internally was:
YYYYMMDDHH:MN:SS
It has been suggested that I remove the colons (:) to shorten this to:
YYYYMMDDHHMNSS
The main advantage of this is that some databases are colon delimited which makes storing a date from
Date::Manip tedious.
In order to maintain backwards compatibility, the Internal variable was introduced. Set it to 0 (to
use the old format) or 1 (to use the new format).
FirstDay
It is sometimes necessary to know what day of week is regarded as first. By default, this is set to
Monday, but many countries and people will prefer Sunday (and in a few cases, a different day may be
desired). Set the FirstDay variable to be the first day of the week (1=Monday, 7=Sunday) Monday
should be chosen to to comply with ISO 8601.
WorkWeekBeg, WorkWeekEnd
The first and last days of the work week. By default, Monday and Friday. WorkWeekBeg must come
before WorkWeekEnd numerically. The days are numbered from 1 (Monday) to 7 (Sunday).
There is no way to handle an odd work week of Thu to Mon for example or 10 days on, 4 days off.
WorkDay24Hr
If this is non-nil, a work day is treated as being 24 hours long. The WorkDayBeg and WorkDayEnd
variables are ignored in this case.
WorkDayBeg, WorkDayEnd
The times when the work day starts and ends. WorkDayBeg must come before WorkDayEnd (i.e. there is
no way to handle the night shift where the work day starts one day and ends another). Also, the
workday MUST be more than one hour long (of course, if this isn't the case, let me know... I want a
job there!).
The time in both can be in any valid time format (including international formats), but seconds will
be ignored.
TomorrowFirst
Periodically, if a day is not a business day, we need to find the nearest business day to it. By
default, we'll look to "tomorrow" first, but if this variable is set to 0, we'll look to "yesterday"
first. This is only used in the Date_NearestWorkDay and is easily overridden (see documentation for
that function).
DeltaSigns
Prior to Date::Manip version 5.07, a negative delta would put negative signs in front of every
component (i.e. "0:0:-1:-3:0:-4"). By default, 5.07 changes this behavior to print only 1 or two
signs in front of the year and day elements (even if these elements might be zero) and the sign for
year/month and day/hour/minute/second are the same. Setting this variable to non-zero forces deltas
to be stored with a sign in front of every element (including elements equal to 0).
Jan1Week1
ISO 8601 states that the first week of the year is the one which contains Jan 4 (i.e. it is the first
week in which most of the days in that week fall in that year). This means that the first 3 days of
the year may be treated as belonging to the last week of the previous year. If this is set to non-
nil, the ISO 8601 standard will be ignored and the first week of the year contains Jan 1.
YYtoYYYY
By default, a 2 digit year is treated as falling in the 100 year period of CURR-89 to CURR+10.
YYtoYYYY may be set to any integer N to force a 2 digit year into the period CURR-N to CURR+(99-N).
A value of 0 forces the year to be the current year or later. A value of 99 forces the year to be
the current year or earlier. Since I do no checking on the value of YYtoYYYY, you can actually have
it any positive or negative value to force it into any century you want.
YYtoYYYY can also be set to "C" to force it into the current century, or to "C##" to force it into a
specific century. So, in 1998, "C" forces 2 digit years to be 1900-1999 and "C18" would force it to
be 1800-1899.
It can also be set to the form "C####" to force it into a specific 100 year period. C1950 refers to
1950-2049.
UpdateCurrTZ
If a script is running over a long period of time, the time zone may change during the course of
running it (i.e. when daylight saving time starts or ends). As a result, parsing dates may start
putting them in the wrong time zone. Since a lot of overhead can be saved if we don't have to check
the current time zone every time a date is parsed, by default checking is turned off. Setting this
to non-nil will force time zone checking to be done every time a date is parsed... but this will
result in a considerable performance penalty.
A better solution would be to restart the process on the two days per year where the time zone switch
occurs.
IntCharSet
If set to 0, use the US character set (7-bit ASCII) to return strings such as the month name. If set
to 1, use the appropriate international character set. For example, If you want your French
representation of December to have the accent over the first "e", you'll want to set this to 1.
ForceDate
This variable can be set to a date in the format: YYYY-MM-DD-HH:MN:SS to force the current date to be
interpreted as this date. Since the current date is used in parsing, this string will not be parsed
and MUST be in the format given above.
TodayIsMidnight
If set to a true value (e.g. 1), then "today" will mean the same as "midnight today"; otherwise it
will mean the same as "now".
HOLIDAY SECTION
The holiday section of the config file is used to define holidays. Each line is of the form:
DATE = HOLIDAY
HOLIDAY is the name of the holiday (or it can be blank in which case the day will still be treated as a
holiday... for example the day after Thanksgiving or Christmas is often a work holiday though neither are
named).
DATE is a string which can be parsed to give a valid date in any year. It can be of the form
Date
Date + Delta
Date - Delta
Recur
A valid holiday section would be:
*Holiday
1/1 = New Year's Day
third Monday in Feb = Presidents' Day
fourth Thu in Nov = Thanksgiving
# The Friday after Thanksgiving is an unnamed holiday most places
fourth Thu in Nov + 1 day =
1*0:0:0:0:0:0*EASTER = Easter
1*11:0:11:0:0:0*DWD = Veteran's Day (observed)
1*0:0:0:0:0:0*EASTER,PD5 = Good Friday
In a Date + Delta or Date - Delta string, you can use business mode by including the appropriate string
(see documentation on DateCalc) in the Date or Delta. So (in English), the first workday before
Christmas could be defined as:
12/25 - 1 business day =
The dates may optionally contain the year. For example, the dates
1/1
1/1/1999
refers to Jan 1 in any year or in only 1999 respectively. For dates that refer to any year, the date
must be written such that by simply appending the year (separated by spaces) it can be correctly
interpreted. This will work for everything except ISO 8601 dates, so ISO 8601 dates may not be used in
this case.
Note that the dates are specified in whatever format is set using the Date_Init options, so if the
standard parsing is D/M/YYYY, you would need to specify it as:
25/12/2002 = Christmas
In cases where you are interested in business type calculations, you'll want to define most holidays
using recurrences, since they can define when a holiday is celebrated in the financial world. For
example, Christmas should be defined as:
1*12:0:24:0:0:0*FW1 = Christmas
NOTE: It was pointed out to me that using a similar type recurrence to define New Years does not work.
The recurrence:
1*12:0:31:0:0:0*FW1
fails (worse, it goes into an infinite loop). The problem is that each holiday definition is applied to
a specific year and it expects to find the holiday for that year. When this recurrence is applied to the
year 1995, it returns the holiday for 1996 and fails.
Use the recurrence:
1*1:0:1:0:0:0*NWD
instead.
If you wanted to define both Christmas and Boxing days (Boxing is the day after Christmas, and is
celebrated in some parts of the world), you could do it in one of the following ways:
1*12:0:24:0:0:0*FW1 = Christmas
1*12:0:25:0:0:0*FW1 = Boxing
1*12:0:24:0:0:0*FW1 = Christmas
01*12:0:24:0:0:0*FW1 = Boxing
1*12:0:24:0:0:0*FW1 = Christmas
1*12:0:25:0:0:0*FW1,a = Boxing
The following examples will NOT work:
1*12:0:24:0:0:0*FW1 = Christmas
1*12:0:24:0:0:0*FW2 = Boxing
1*12:0:24:0:0:0*FW1 = Christmas
1*12:0:24:0:0:0*FW1 = Boxing
The reasoning behind all this is as follows:
Holidays go into affect the minute they are parsed. So, in the case of:
1*12:0:24:0:0:0*FW1 = Christmas
1*12:0:24:0:0:0*FW2 = Boxing
the minute the first line is parsed, Christmas is defined as a holiday. The second line then steps
forward 2 work days (skipping Christmas since that's no longer a work day) and define the work day two
days after Christmas, NOT the day after Christmas.
An good alternative would appear to be:
1*12:0:24:0:0:0*FW1 = Christmas
1*12:0:24:0:0:0*FW1 = Boxing
This unfortunately fails because the recurrences are currently stored in a hash. Since these two
recurrences are identical, they fail (the first one is overwritten by the second and in essence,
Christmas is never defined).
To fix this, make them unique with either a fake flag (which is ignored):
1*12:0:24:0:0:0*FW1,a = Boxing
or adding an innocuous 0 somewhere:
01*12:0:24:0:0:0*FW1 = Boxing
The other good alternative would be to make two completely different recurrences such as:
1*12:0:24:0:0:0*FW1 = Christmas
1*12:0:25:0:0:0*FW1 = Boxing
At times, you may want to switch back and forth between two holiday files. This can be done by calling
the following:
Date_Init("EraseHolidays=1","PersonalCnf=FILE1");
...
Date_Init("EraseHolidays=1","PersonalCnf=FILE2");
...
EVENTS SECTION
The Events section of the config file is similar to the Holiday section. It is used to name certain days
or times, but there are a few important differences:
Events can be assigned to any time and duration
All holidays are exactly 1 day long. They are assigned to a period of time from midnight to
midnight.
Events can be based at any time of the day, and may be of any duration.
Events don't affect business mode calculations
Unlike holidays, events are completely ignored when doing business mode calculations.
Whereas holidays were added with business mode math in mind, events were added with calendar and
scheduling applications in mind.
Every line in the events section is of the form:
EVENT = NAME
where NAME is the name of the event, and EVENT defines when it occurs and its duration. An EVENT can be
defined in the following ways:
Date
Date*
Date ; Date
Date ; Delta
Here, Date* refers to a string containing a Date with NO TIME fields (Jan 12, 1/1/2000, 2010-01-01) while
Date does contain time fields. Similarly, Recur* stands for a recurrence with the time fields all equal
to 0) while Recur stands for a recurrence with at least one non-zero time field.
Both Date* and Recur* refer to an event very similar to a holiday which goes from midnight to midnight.
Date and Recur refer to events which occur at the time given and with a duration of 1 hour.
Events given by "Date ; Date", "Date ; Delta", and "Recur ; Delta" contain both the starting date and
either ending date or duration.
Events given as three elements "Date ; Delta ; Delta" or "Recur ; Delta ; Delta" take a date and add both
deltas to it to give the starting and ending time of the event. The order and sign of the deltas is
unimportant (and both can be the same sign to give a range of times which does not contain the base
date).
KNOWN PROBLEMS
The following are not bugs in Date::Manip, but they may give some people problems.
Unable to determine Time Zone
Perhaps the most common problem occurs when you get the error:
Error: Date::Manip unable to determine Time Zone.
Date::Manip tries hard to determine the local time zone, but on some machines, it cannot do this
(especially non-Unix systems). To fix this, just set the TZ variable, either at the top of the
Manip.pm file, in the DateManip.cnf file, or in a call to Date_Init. I suggest using the form
"EST5EDT" so you don't have to change it every 6 months when going to or from daylight saving time.
Windows NT does not seem to set the time zone by default. From the Perl-Win32-Users mailing list:
> How do I get the TimeZone on my NT?
>
> $time_zone = $ENV{'TZ'};
>
You have to set the variable before, WinNT doesn't set it by
default. Open the properties of "My Computer" and set a SYSTEM
variable TZ to your time zone. Jenda@Krynicky.cz
This might help out some NT users.
A minor (false) assumption that some users might make is that since Date::Manip passed all of its
tests at install time, this should not occur and are surprised when it does.
Some of the tests are time zone dependent. Since the tests all include input and expected output, I
needed to know in advance what time zone they would be run in. So, the tests all explicitly set the
time zone using the TZ configuration variable passed into Date_Init. Since this overrides any other
method of determining the time zone, Date::Manip uses this and doesn't have to look elsewhere for the
time zone.
When running outside the tests, Date::Manip has to rely on its other methods for determining the time
zone.
Missing date formats
Please see the Date::Manip::Problems document for a discussion.
Complaining about getpwnam/getpwuid
Another problem is when running on Micro$oft OS's. I have added many tests to catch them, but they
still slip through occasionally. If any ever complain about getpwnam/getpwuid, simply add one of the
lines:
$ENV{OS} = Windows_NT
$ENV{OS} = Windows_95
to your script before
use Date::Manip
Date::Manip is slow
The reasons for this are covered in the SHOULD I USE DATE::MANIP section above.
Some things that will definitely help:
Version 5.21 does run noticeably faster than earlier versions due to rethinking some of the
initialization, so at the very least, make sure you are running this version or later.
ISO-8601 dates are parsed first and fastest. Use them whenever possible.
Avoid parsing dates that are referenced against the current time (in 2 days, today at noon, etc.).
These take a lot longer to parse.
Example: parsing 1065 dates with version 5.11 took 48.6 seconds, 36.2
seconds with version 5.21, and parsing 1065 ISO-8601 dates with version
5.21 took 29.1 seconds (these were run on a slow, overloaded computer with
little memory... but the ratios should be reliable on a faster computer).
Business date calculations are extremely slow. You should consider alternatives if possible (i.e.
doing the calculation in exact mode and then multiplying by 5/7). Who needs a business date more
accurate than "6 to 8 weeks" anyway, right :-)
Never call Date_Init more than once. Unless you're doing something very strange, there should never
be a reason to anyway.
Sorting Problems
If you use Date::Manip to sort a number of dates, you must call Date_Init either explicitly, or by
way of some other Date::Manip routine before it is used in the sort. For example, the following code
fails:
use Date::Manip;
# Date_Init;
sub sortDate {
my($date1, $date2);
$date1 = ParseDate($a);
$date2 = ParseDate($b);
return (Date_Cmp($date1,$date2));
}
@dates = ("Fri 16 Aug 96",
"Mon 19 Aug 96",
"Thu 15 Aug 96");
@i=sort sortDate @dates;
but if you uncomment the Date_Init line, it works. The reason for this is that the first time you
call Date_Init, it initializes a number of items used by Date::Manip. Some of these have to be
sorted (regular expressions sorted by length to ensure the longest match). It turns out that Perl
has a bug in it which does not allow a sort within a sort. At some point, this should be fixed, but
for now, the best thing to do is to call Date_Init explicitly. The bug exists in all versions up to
5.005 (I haven't tested 5.6.0 yet).
NOTE: This is an EXTREMELY inefficient way to sort data (but read the 2nd note below for an easy way
to correct this). Instead, you should parse the dates with ParseDate, sort them using a normal
string comparison, and then convert them back to the format desired using UnixDate.
NOTE: It has been reported to me that you can still use ParseDate to sort dates in this way, and be
quite efficient through the use of Memoize. Just add the following lines to your code:
use Date::Manip;
use Memoize;
memoize('ParseDate');
...
@i=sort sortDate @dates;
Since sortDate would call ParseDate with the same data over and over, this is a perfect application
for the Memoize module. So, sorting with ParseDate is no longer slow for sorting.
RCS Control
If you try to put Date::Manip under RCS control, you are going to have problems. Apparently, RCS
replaces strings of the form "$Date...$" with the current date. This form occurs all over in
Date::Manip. To prevent the RCS keyword expansion, checkout files using "co -ko". Since very few
people will ever have a desire to do this (and I don't use RCS), I have not worried about it.
KNOWN BUGS
Daylight Saving Times
Date::Manip 5.xx does not handle daylight saving time, though it does handle time zones to a certain
extent. Converting from EST to PST works fine. Going from EST to PDT is unreliable.
The following examples are run in the winter of the US East coast (i.e. in the EST time zone).
print UnixDate(ParseDate("6/1/97 noon"),"%u"),"\n";
=> Sun Jun 1 12:00:00 EST 1997
June 1 EST does not exist. June 1st is during EDT. It should print:
=> Sun Jun 1 00:00:00 EDT 1997
Even explicitly adding the time zone doesn't fix things (if anything, it makes them worse):
print UnixDate(ParseDate("6/1/97 noon EDT"),"%u"),"\n";
=> Sun Jun 1 11:00:00 EST 1997
Date::Manip converts everything to the current time zone (EST in this case).
Related problems occur when trying to do date calculations over a time zone change. These
calculations may be off by an hour.
Also, if you are running a script which uses Date::Manip over a period of time which starts in one
time zone and ends in another (i.e. it switches form Daylight Saving Time to Standard Time or vice
versa), many things may be wrong (especially elapsed time).
These problems will not be fixed in Date::Manip 5.xx. Date::Manip 6.xx has full support for time
zones and daylight saving time.
BUGS AND QUESTIONS
Please refer to the Date::Manip::Problems documentation for information on submitting bug reports or
questions to the author.
SEE ALSO
Date::Manip - main module documentation
LICENSE
This script is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.
AUTHOR
Sullivan Beck (sbeck@cpan.org)
perl v5.38.2 2024-03-02 Date::Manip::DM5(3pm)