Ubuntu Manpage: tiptop - display hardware performance counters for Linux tasks

NAME

       tiptop - display hardware performance counters for Linux tasks

SYNOPSIS

       tiptop [OPTION]

       tiptop [OPTION] -- command  (EXPERIMENTAL)

       ptiptop PATTERN [OPTIONS]

DESCRIPTION

The tiptop program provides a dynamic real-time view of the tasks running in the system. tiptop is very
similar to top (1), but the information displayed comes from hardware counters.

tiptop has two running modes: live-mode and batch-mode. In both modes, the system is periodically queried
for the values of hardware counters, and various ratios are printed for each task. In live-mode, the
display is regularly updated with new values at constant time intervals. In batch-mode, the same
information is emitted to stdout. Batch-mode is appropriate for saving to a file or for further
processing. No interaction is possible in batch-mode.

Unless tiptop is run by root, or the executable is setuid-root, a user can only monitor the tasks it
owns.

The results produced by tiptop are organized in screens. A screen consists in rows representing tasks,
and columns reporting various values and ratios collected from hardware counters. Many screens can be
defined. Only one screen is displayed at a time. The default screen (number 0) reports target independent
values as defined in the file /usr/include/linux/event_counter.h. Other screens may rely on target-
dependent counters.

When an expression would result in a division by zero, a '-' sign is printed. When a counter involved in
an expression could not be read, a '?' sign is printed.

If -- appears in the command line, tiptop treats the rest of the line as a command. A new process is
forked, and hardware counters are attached just before execvp is called. This makes it possible to trace
an application from the first instruction. Only the child is traced, and idle-mode is enabled (in live
mode, this can be overridden by hitting keys 'p' and 'i'). This is commonly used in combination with
sticky mode to track a command from start to finish. This is experimental!

ptiptop is simply a shortcut for tiptop -p.

tiptop requires Linux 2.6.31+.

COMMAND-LINE OPTIONS

Command line options with a parameter override values specified in the configuration file. Toggles set
the value or invert the value read in the configuration file (if any).

-b Start tiptop in batch-mode. Output is sent to stdout, and no interactive command is accepted. tiptop
will run forever, or until the number of iterations specified by -n.

-c display the command line of the task instead of its name. (toggle)

--cpu-min VALUE
%CPU activity threshold. Below this value, a task is considered
idle and is not reported (unless idle-mode is on, see flag -i).

-d VALUE
Specify the delay between refreshes. VALUE can be fractional. It must be larger than 0.01.

-E FILENAME
Specify file where errors are logged. By default errors are logged to stderr in batch-mode, and a
temporary file in live-mode.

--epoch
Print the Epoch at each refresh. In batch-mode, it is printed at the beginning of each row. In live-
mode, it is at the bottom of the display. (toggle)

-h --help
Print a brief help message and exit.

-H Show threads. (toggle)

-i Show idle tasks. (toggle)

-K --kernel
Include kernel activity in the reported values. This is only possible is the user is root, the tiptop
executable is setuid root, or the paranoia level is low enough. (toggle)
See file /proc/sys/kernel/perf_event_paranoid
(perf_counter_paranoid on Linux 2.6.31).

--list-screens
List available screens and exit.

-n VALUE
Automatically exit after VALUE iterations.

--no-collect
By default, when the maximum number of open files is reached, and new processes appear, tiptop
searches for idle processes and closes the files in order to make room for the new ones. This flag
disables this behavior: in case of file shortage, new processes will not get more chances than older
ones.

-o FILENAME
Specify the filename for the output of batch mode.

--only-conf
Only screens defined in configuration file displayed (no default).

-p --pid VALUE
Filters processes according to VALUE. VALUE can be either the numeric value PID, or a string. In case
of a string, all tasks whose names or command lines (depending on the display, see -c) contain VALUE
are reported.

-S VALUE
Start tiptop with screen number VALUE if VALUE is an integer. Otherwise looks for the first screen
whose name contains VALUE.

--sticky
Start in sticky mode: tasks stay in the list after they die. In live-mode, they appear in a different
color (when supported). In batch-mode, the word DEAD is appended. (toggle)

--timestamp
Print a timestamp at the beginning of each row. The timestamp is the number of refreshes so far. In
batch-mode, it is printed at the beginning of each row. In live-mode, it is at the bottom of the
display. (toggle)

-u USER
Only show tasks owned by USER. USER can be either a login name, or the numeric value UID.

-U Show the owner of each task. (toggle)

-v Display build information and exit.

--version
Display version information and disclaimer and exit.

-w VALUE
Watch the task specified by VALUE. VALUE can be either the numeric value PID, or a string. In case of
a string, all tasks whose names or command lines (depending on the display, see -c) contain VALUE are
reported. In live-mode, watched tasks are shown in a different color (when supported). In batch-mode,
an ASCII arrow points to the watched tasks.

-W PATH
Directory where the configuration file is located.

INTERACTIVE COMMANDS

In live-mode, tiptop accepts single-key commands.

LEFT, RIGHT
Rotate through available screens.

<, >
Change the reference column for sorting to the left or to the right.

c Toggle between showing task names and command lines.

d Change the refresh interval. The new value is queried. Fractional values larger than 0.01 are
accepted.

e Display the errors encoutered so far. Scroll with UP, DOWN, PAGE_UP, PAGE_DOWN, HOME and END.

h Display a brief description of the screen and each column.

H Toggle between showing individual threads and accumulating values per process.

i Toggle between showing only active tasks and showing also idle tasks.

K Toggle between showing kernel activity and only user activity. Kernel mode is only available to root.
Switching to and from kernel mode resets all counters.

k Kill a process. The user is asked for the PID, and the signal to send.

p Filter tasks by name or PID. The user is asked for a PID or string. In case a string is entered, only
the tasks whose name or command line contain the string are displayed. Changing the filter resets all
counters.

q Quit.

R Change sorting order: ascending or descending.

S Toggle sticky mode.

s Same as d.

u Filter tasks by user. The user name or PID is queried. Note that, unless tiptop is run by root or
setuid root, tasks owned by somebody else cannot be monitored. Changing the filter resets all
counters.

U Toggle displaying each task's owner.

w Used to track a particular task. The user is asked for a PID or string. In case a string is entered,
all tasks whose name or command line contain the string are highlighted.

W Writes a configuration file for the current state in the current directory.

FILES

       During startup, tiptop attempts to read a configuration file. The file must be named .tiptoprc. This file
       is  first  searched  in  the current directory, then in the directory defined by the environment variable
       TIPTOP if it exists, finally in the user's home.

   Syntax
       The file is structured in XML. The syntax is as follows.

       Root of tree
              The root of the xml tree is tiptop.  <tiptop> ... </tiptop>

       Options
              Options can be specified on an <options> block.

              <options>
                <option name="option1" value="value_option1"/>
                <option name="option2" value="value_option2"/>
                     ...  </options>

              Recognized options listed below, with their corresponding command line option.

              cpu_threshold (--cpu-min), delay (-d), idle (-i), max_iter  (-n),  show_cmdline  (-c),  show_epoch
              (--epoch),  show_kernel  (-K),  show_timestamp  (--timestamp),  show_threads (-H), show_user (-U),
              watch_name (-w), sticky (--sticky), watch_uid (-w)

       Screens
              Screens are defined inside a <screen> block. A screen is made of counters and  columns.  A  screen
              has a name and an optional description.

              <screen name="my_screen" desc="what this screen is about">
                     ....  </screen>

              Counters must provide an alias (used for further reference) and a configuration. The configuration
              is  either  a  predefined  value,  or the actual value that must be provided to the perf_even_open
              system call (typically found in vendor architecture manuals).

              Predefined    values    are:    CPU_CYCLES,    INSTRUCTIONS,    CACHE_REFERENCES,    CACHE_MISSES,
              BRANCH_INSTRUCTIONS, BRANCH_MISSES, and BUS_CYCLES.

              <counter alias="instr" config="INSTRUCTIONS" />

              For  non-predefined  configs,  a  type  must  be  provided.  Currently,  only RAW and HW_CACHE are
              supported.

              Optionally, a counter may be restricted to a specific architecture (such as "x86"), and  a  model.
              The   definition   of   the   model   is   architecture-dependent.  For  x86,  it  is  defined  as
              DisplayFamily_DisplayModel as computed by the instruction CPUID.  A counter for  issued  micro-ops
              on Sandy Bridge may look like the following:

              <counter alias="uops_issued" config="0x010e"
                       type="RAW" arch="x86" model="06_2A" />

              For the x86 architecture, a single counter can be valid for several models.

              <counter alias="uOP" config="0x1c2" type="RAW"
                       arch="x86" model="06_1A;06_1E;06_1F;06_2E" />

              When  the type is HW_CACHE, the config is specified by shifting and ORing predefined values. The 8
              least significant bits represent the cache level (possible values L1D, L1I, LL, DTLB, ITLB,  BPU).
              The  next  8  bits  represent the type of access (OP_READ, OP_WRITE, OP_PREFETCH). The last 8 bits
              represent are one of RESULT_ACCESS or RESULT_MISS.

              Note that "shift left" is expressed as shl (the usual << does not fit well in xml).

              <counter alias="L1Rmiss" type="HW_CACHE"
                       config="L1D | (OP_READ shl 8) | (RESULT_MISS shl 16)" />

              See also /usr/include/linux/perf_events.h for more on config and type.

              A column defines its header, the printf-like format for values,  and  an  expression.  Expressions
              evaluate as double precision. A description is optional.

              <counter alias="instr" config="INSTRUCTIONS" />
              <counter alias="cycle" config="CPU_CYCLES" />
              <column header=" IPC" format="%4.2f"
                      desc="Total instructions per cycle"
                      expr="instr/cycle"/>
              <column header=" ipc" format="%4.2f"
                      desc="Total instructions per cycle"
                      expr="instr/cycle" />

              The  syntax  of  expressions  supports  basic  arithmetic (+ - * / parentheses and constants). The
              special notation "delta(counter)" evaluates as the variation of  the  counter  between  refreshes.
              Expressions  can  also  refer to predefined variables such as CPU_TOT (CPU usage), CPU_SYS (system
              CPU usage), CPU_USER (user CPU usage), PROC_ID (processor where the process was last seen).

              <column header=" ipc" format="%4.2f"
                    desc="Average IPC over last period"
                    expr="delta(instr) / delta(cycle)" />

       Sample config file

              <tiptop>

                <options>
                  <option name="delay" value="2.0" />
                  <option name="stick" value="1" />
                </options>

                <screen name="example" desc="Sample config file">
                  <counter alias="cycle" config="CPU_CYCLES"  />
                  <counter alias="instr" config="INSTRUCTIONS" />
                  <counter alias="miss" config="CACHE_MISSES" />
                  <counter alias="br_miss" config="BRANCH_MISSES" />

                  <!-- Sandy Bridge only -->
                  <counter alias="uops_issued" config="0x010e"
                           type="RAW" arch="x86" model="06_2A" />

                  <column header=" %CPU" format="%5.1f"
                          desc="CPU usage" expr="CPU_TOT" />
                  <column header="   P" format="  %2.0f"
                          desc="Processor where last seen" expr="PROC_ID" />
                  <column header="  Mcycle" format="%8.2f"
                          desc="Cycles (millions)"
                          expr="delta(cycle) / 1e6" />
                  <column header="  Minstr" format="%8.2f"
                          desc="Instructions (millions)"
                          expr="delta(instr) / 1e6" />
                  <column header=" IPC" format="%4.2f"
                          desc="Executed instructions per cycle"
                          expr="delta(instr) / delta(cycle)" />
                  <column header=" %MISS" format="%6.2f"
                          desc="Cache miss per instructions (in %)"
                          expr="100 * delta(miss) / delta(instr)" />
                  <column header=" %BMIS" format="%6.2f"
                          desc="Branch misprediction per instruction (in %)"
                          expr="100 * delta(br_miss) / delta(instr)" />
                  <column header="uops/inst" format="     %4.1f"
                          desc="Number of issued uops per instruction"
                          expr="delta(uops_issued) / delta(instr)" />
                </screen>
              </tiptop>

CAVEATS

       tiptop does not seem to work within a virtualized environment.

       Attaching counters to processes may fail for various reasons, such as asking for more than  available  in
       hardware  (tiptop  does  not  implement sampling), or reaching the maximum number of open files. In these
       cases, you may consider filtering the processes (see flags -u, -p).

       To mitigate the limitation of the maximum number of open files, tiptop tries to close the events attached
       to idle processes. If this is a problem, see the flag --no-collect.

BUGS

       Send bug reports to:
          Erven Rohou <erven.rohou@inria.fr>

AUTHOR

       Written by Erven Rohou.