Provided by: scamper_20211212-1.2build1_amd64 
NAME
sc_bdrmap — scamper driver to map first hop border routers of networks
SYNOPSIS
sc_bdrmap [-6ADi] [-a ip2as-file] [-c allyconf] [-C flowid] [-f firsthop] [-l log-file] [-M ipmap-file]
[-o output-file] [-O option] [-p port] [-U unix] [-R unix] [-S srcaddr] [-v vpases]
[-x ixp-file]
sc_bdrmap [-6] [-a ip2as-file] [-d dump] [-g delegated-file] [-M ipmap-file] [-n names-file]
[-r relationships-file] [-v vpases] [-x ixp-file] [file ...]
DESCRIPTION
The sc_bdrmap utility provides the ability to connect to a running scamper(1) instance and use it to map
the first hop border routers of networks using the "bdrmap" technique. sc_bdrmap uses targeted
traceroutes, alias resolution techniques, knowledge of traceroute idiosyncrasies, and codification of
topologicial constraints in a structured set of constraints, to correctly identify interdomain links at
the granularity of individual border routers. sc_bdrmap operates in two distinct modes: data collection,
and data analysis.
In the data collection mode, sc_bdrmap uses Paris traceroute with ICMP-echo probes to trace the paths
towards every distinct address block, using a stop-set to avoid re-probing portions of paths that do not
provide useful constraints for the first hop border routers, as well as alias resolution techniques
(Mercator, Ally, Prefixscan, and the Too-Big-Trick) to collapse the interface graph into a router-level
topology. sc_bdrmap will also use probes with the record-route and pre-specified timestamp IP-level
options to collect additional information on the return path from a router, where the probes are usable.
In the data analysis mode, sc_bdrmap uses the collected data to infer a router-level topology of the
hosting network and the interconnecting routers belonging to the hosting network's neighbors.
The supported options to sc_bdrmap are as follows:
-6 specifies that sc_bdrmap should infer IPv6 border routers, and that the input files are for the
IPv6 topology. This feature is currently work in progress.
-a ip2as-file
specifies the IP prefix to Autonomous System (AS) mapping file that sc_bdrmap should use when
collecting and analysing topology data. See the examples section for a description of how this
file must be formatted.
-A specifies the AS numbers (ASNs) that sc_bdrmap should collect data towards. This option is
useful for testing and debugging.
-c allyconf
specifies the number of times that sc_bdrmap should repeat pair-wise alias inferences that were
made implying a central shared IP-ID counter. By default, each pair of aliases is tested five
additional times at 5 minute intervals because two IP addresses belonging to two different
routers could happen to return IP-ID values that imply a central shared IP-ID counter.
-C flowid
specifies the checksum that scamper should use in ICMP probes, or the source port that scamper
should use in UDP probes, so that traceroutes to the same destination will also use the same
flowid. By default, the flowid is 0x420.
-d dump
specifies the dump ID to use to analyze the collected data. Currently, ID values 1 (routers) and
2 (traces) are valid, which dumps inferred routers and annotated traceroute paths, respectively.
-D causes sc_bdrmap to detach and become a daemon.
-f firsthop
specifies the first hop in a traceroute path that sc_bdrmap should begin at when collecting
traceroute paths. If sc_bdrmap is being run behind a NAT router, the private IP address of that
router is uninteresting, and this option allows that hop to be skipped.
-g delegated-file
specifies an IP address delegations file that can be provided to sc_bdrmap to allow inferences in
the analysis phase of who operates unrouted IP address space.
-i specifies the IP addresses that sc_bdrmap should collect data towards. This option is useful for
testing and debugging.
-l log-file
specifies the name of a file to log progress output from sc_bdrmap generated at run time.
-M ipmap-file
specifies the name of a file containing individual IP address to ASN mappings, which override
heuristics inferring if the IP address is from a reserved address, or an IXP address.
-n names-file
specifies the name of a file containing IP address to domain name system names.
-o output-file
specifies the name of the output file to be written during the data collection phase. The output
file will use the warts(5) format.
-O option
allows the behavior of sc_bdrmap to be further tailored. The current choices for this option
are:
- dumpborders: only dump inferred border routers, not all VP routers.
- dumponedsts: further annotate routers that were only observed towards one AS.
- dumptracesets: dump the traceroutes observed towards networks where no topology was observed
to be routed by a neighbor network.
- impatient: probe the destination ASes in order of number of address blocks, so that the
probing will complete fastest.
- noalias: do not do alias resolution probes when collecting topology data.
- nogss: do not use a global stop set when collecting topology data.
- noipopts: do not probe with IP record route and IP prespecified timestamp options.
- nomerge: do not analytically merge IP interfaces to routers based on common adjacent
neighbor routers.
- noself: do not report links to other routers operated by the network hosting the vantage
point.
- randomdst: probe a random address in each address block, rather than the first.
- udp: probe using UDP traceroute probes.
-p port
specifies the port on the local host where scamper(1) is accepting control socket connections.
-r relationships-file
specifies the AS relationships file which is used in the analysis phase to reason about who owns
each router in the observed topology.
-R unix
specifies the name of a unix domain socket where a remote scamper(1) instance is accepting remote
control socket connections.
-S srcaddr
specifies the source address that scamper(1) should use in probes.
-U unix
specifies the name of a unix domain socket where a local scamper(1) instance is accepting control
socket connections.
-v vpases
specifies the name of a file, or a list of ASes, that represent the network hosting the vantage
point.
-x ixp-file
specifies the name of a file that contains a list of prefixes used by an IXP to enable
interconnection at their facilities.
EXAMPLES
Given a set of prefixes with origin AS in a file named ip2as.txt, a list of VP ases in vpases.txt, a list
of IXP prefixes in ixp.txt, and a scamper(1) instance listening on port 31337 configured to probe at 100
packets per second started as follows:
scamper -P 31337 -p 100
the following command will collect raw topology data to support inference of border routers for the
network hosting the vantage point, storing raw data into bdrmap.warts, and logging run-time information
into logfile1.txt:
sc_bdrmap -p 31337 -o bdrmap.warts -l logfile1.txt -a ip2as.txt -v vpases.txt -x ixp.txt
To infer border routers from the collected data, using the same input files as above, with a set of AS
relationships contained in asrel.txt, and a set of prefix delegations assembled from the Regional
Internet Registry (RIR) Statistics files in delegated.txt:
sc_bdrmap -d routers -a ip2as.txt -g delegated.txt -r asrel.txt -v vpases.txt -x ixp.txt
bdrmap.warts >bdrmap.routers.txt
To view annotated traceroutes stored in bdrmap.warts with IP to DNS names information stored in
names.txt:
sc_bdrmap -d traces -a ip2as.txt -v vpases.txt -x ixp.txt -n names.txt bdrmap.wart
>bdrmap.traces.txt
SEE ALSO
scamper(1), sc_ally(1), sc_speedtrap(1), sc_wartsdump(1), sc_warts2text(1), sc_warts2json(1)
M. Luckie, A. Dhamdhere, B. Huffaker, D. Clark, and k. claffy, bdrmap: Inference of Borders Between IP
Networks, Proc. ACM/SIGCOMM Internet Measurement Conference 2016.
R. Govindan and H. Tangmunarunkit, Heuristics for Internet Map Discovery, Proc. IEEE INFOCOM 2000.
N. Spring, R. Mahajan, and D. Wetherall, Measuring ISP topologies with Rocketfuel, Proc. ACM SIGCOMM
2002.
B. Donnet, P. Raoult, T. Friedman, and M. Crovella, Efficient algorithms for large-scale topology
discovery, Proc. ACM SIGMETRICS 2005.
B. Augustin, X. Cuvellier, B. Orgogozo, F. Viger, T. Friedman, M. Latapy, C. Magnien, and R. Teixeira,
Avoiding traceroute anomalies with Paris traceroute, Proc. ACM/SIGCOMM Internet Measurement Conference
2006.
A. Bender, R. Sherwood, and N. Spring, Fixing Ally's growing pains with velocity modeling, Proc.
ACM/SIGCOMM Internet Measurement Conference 2008.
M. Luckie, Scamper: a Scalable and Extensible Packet Prober for Active Measurement of the Internet, Proc.
ACM/SIGCOMM Internet Measurement Conference 2010.
R. Beverly, W. Brinkmeyer, M. Luckie, and J.P. Rohrer, IPv6 Alias Resolution via Induced Fragmentation,
Proc. Passive and Active Measurement Conference 2013.
M. Luckie, R. Beverly, W. Brinkmeyer, and k claffy, Speedtrap: Internet-scale IPv6 Alias Resolution,
Proc. ACM/SIGCOMM Internet Measurement Conference 2013.
M. Luckie, B. Huffaker, A. Dhamdhere, V. Giotsas, and k claffy, AS Relationships, Customer Cones, and
Validation, Proc. ACM/SIGCOMM Internet Measurement Conference 2013.
AUTHOR
sc_bdrmap was written by Matthew Luckie <mjl@luckie.org.nz>.
Debian September 24, 2019 SC_BDRMAP(1)