Provided by: libqmi-utils_1.35.2-0ubuntu2_amd64 
NAME
qmicli - Control QMI devices
DESCRIPTION
Usage:
qmicli [OPTION?] - Control QMI devices
Help Options:
-h, --help
Show help options
--help-all
Show all help options
--help-dms
Show Device Management Service options
--help-nas
Show Network Access Service options
--help-wds
Show Wireless Data Service options
--help-pbm
Show Phonebook Management options
--help-pdc
Show platform device configurations options
--help-uim
Show User Identity Module options
--help-sar
Show Specific Absorption Rate options
--help-wms
Show Wireless Messaging Service options
--help-wda
Show Wireless Data Administrative options
--help-voice
Show Voice Service options
--help-loc
Show location options
--help-qos
Show Quality of Service options
--help-gas
Show General Application Service options
--help-gms
Show General Modem Service options
--help-dsd
Show Data System Determination options
--help-dpm
Show Data Port Mapper Service options
--help-fox
Show Foxconn Modem Service options
--help-atr
Show AT Relay Service options
--help-imsp
Show IP Multimedia Subsystem Presence Service options
--help-imsa
Show IP Multimedia Subsystem Application Service options
--help-ims
Show IP Multimedia Subsystem Settings Service options
--help-link-management
Show link management specific options
--help-qmiwwan
Show qmi_wwan driver specific options
DMS options:
--dms-get-ids
Get IDs
--dms-get-capabilities
Get capabilities
--dms-get-manufacturer
Get manufacturer
--dms-get-model
Get model
--dms-get-revision
Get revision
--dms-get-msisdn
Get MSISDN
--dms-get-power-state
Get power state
--dms-uim-set-pin-protection=[(PIN|PIN2),(disable|enable),(current PIN)]
Set PIN protection in the UIM
--dms-uim-verify-pin=[(PIN|PIN2),(current PIN)]
Verify PIN
--dms-uim-unblock-pin=[(PIN|PIN2),(PUK),(new PIN)]
Unblock PIN
--dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)]
Change PIN
--dms-uim-get-pin-status
Get PIN status
--dms-uim-get-iccid
Get ICCID
--dms-uim-get-imsi
Get IMSI
--dms-uim-get-state
Get UIM State
--dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]
Get CK Status
--dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]
Disable CK protection
--dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]
Unblock CK
--dms-get-hardware-revision
Get the HW revision
--dms-get-operating-mode
Get the device operating mode
--dms-set-operating-mode=[(Operating mode)]
Set the device operating mode
--dms-get-time
Get the device time
--dms-get-prl-version
Get the PRL version
--dms-get-activation-state
Get the state of the service activation
--dms-activate-automatic=[Activation Code]
Request automatic service activation
--dms-activate-manual=[SPC,SID,MDN,MIN]
Request manual service activation
--dms-get-user-lock-state
Get the state of the user lock
--dms-set-user-lock-state=[(disable|enable),(current lock code)]
Set the state of the user lock
--dms-set-user-lock-code=[(old lock code),(new lock code)]
Change the user lock code
--dms-read-user-data
Read user data
--dms-write-user-data=[(User data)]
Write user data
--dms-read-eri-file
Read ERI file
--dms-restore-factory-defaults=[(Service Programming Code)]
Restore factory defaults
--dms-validate-service-programming-code=[(Service Programming Code)]
Validate the Service Programming Code
--dms-set-firmware-id
Set firmware id
--dms-get-band-capabilities
Get band capabilities
--dms-get-factory-sku
Get factory stock keeping unit
--dms-list-stored-images
List stored images
--dms-select-stored-image=[modem#,pri#] where # is the index
Select stored image
--dms-delete-stored-image=[modem#|pri#] where # is the index
Delete stored image
--dms-get-firmware-preference
Get firmware preference
--dms-set-firmware-preference=["key=value,..."]
Set firmware preference (required keys: firmware-version, config-version, carrier; optional keys:
modem-storage-index, override-download=yes)
--dms-get-boot-image-download-mode
Get boot image download mode
--dms-set-boot-image-download-mode=[normal|boot-and-recovery]
Set boot image download mode
--dms-get-software-version
Get software version
--dms-set-fcc-authentication
Set FCC authentication
--dms-get-supported-messages
Get supported messages
--dms-hp-change-device-mode=[fastboot]
Change device mode (HP specific)
--dms-swi-get-current-firmware
Get Current Firmware (Sierra Wireless specific)
--dms-swi-get-usb-composition
Get current and supported USB compositions (Sierra Wireless specific)
--dms-swi-set-usb-composition=[#]
Set USB composition (Sierra Wireless specific)
--dms-foxconn-change-device-mode=[fastboot-ota|fastboot-online]
Change device mode (Foxconn specific)
--dms-foxconn-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps]
Get firmware version (Foxconn specific)
--dms-foxconn-set-fcc-authentication=[magic]
Set FCC authentication (Foxconn specific)
--dms-foxconn-set-fcc-authentication-v2=[magic-string,magic-number]
Set FCC authentication (Foxconn specific, v2)
--dms-get-mac-address=[wlan|bt]
Get default MAC address
--dms-reset
Reset the service state
--dms-noop
Just allocate or release a DMS client. Use with `--client-no-release-cid' and/or `--client-cid'
NAS options:
--nas-get-signal-strength
Get signal strength
--nas-get-signal-info
Get signal info
--nas-get-tx-rx-info=[(Radio Interface)]
Get TX/RX info
--nas-get-home-network
Get home network
--nas-get-serving-system
Get serving system
--nas-get-system-info
Get system info
--nas-get-technology-preference
Get technology preference
--nas-get-preferred-networks
Get preferred networks
--nas-set-preferred-networks=[[MCCMNC,access_tech],...]
Set preferred networks list
--nas-get-system-selection-preference
Get system selection preference
--nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma][,[automatic|manual=MCCMNC]]
Set system selection preference
--nas-network-scan
Scan networks
--nas-get-cell-location-info
Get Cell Location Info
--nas-force-network-search
Force network search
--nas-get-operator-name
Get operator name data
--nas-get-plmn-name=[mccmnc]
Get plmn name data
--nas-get-lte-cphy-ca-info
Get LTE Cphy CA Info
--nas-get-rf-band-info
Get RF Band Info
--nas-get-drx
Get DRX
--nas-get-supported-messages
Get supported messages
--nas-swi-get-status
Get status ((Sierra Wireless specific)
--nas-reset
Reset the service state
--nas-noop
Just allocate or release a NAS client. Use with `--client-no-release-cid' and/or `--client-cid'
WDS options:
--wds-start-network=["key=value,..."]
Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile, auth (PAP|CHAP|BOTH), username,
password, autoconnect=yes, ip-type (4|6))
--wds-follow-network
Follow the network status until disconnected. Use with `--wds-start-network'
--wds-stop-network=[Packet data handle] OR [disable-autoconnect]
Stop network
--wds-get-current-settings
Get current settings
--wds-get-packet-service-status
Get packet service status
--wds-get-packet-statistics
Get packet statistics
--wds-get-data-bearer-technology
Get data bearer technology
--wds-get-current-data-bearer-technology
Get current data bearer technology
--wds-go-dormant
Make the active data connection go dormant
--wds-go-active
Make the active data connection go active
--wds-get-dormancy-status
Get the dormancy status of the active data connection
--wds-create-profile=["(3gpp|3gpp2)[,key=value,...]"]
Create new profile using first available profile index (optional keys: name, apn, pdp-type
(IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes,
disabled=yes)
--wds-swi-create-profile-indexed=["(3gpp|3gpp2),#[,key=value,...]"]
Create new profile at specified profile index [Sierra Wireless specific] (optional keys: name,
apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num,
no-roaming=yes, disabled=yes)
--wds-modify-profile=["(3gpp|3gpp2),#,key=value,..."]
Modify existing profile (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth
(NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)
--wds-delete-profile=[(3gpp|3gpp2),#]
Delete existing profile
--wds-get-profile-list=[3gpp|3gpp2]
Get profile list
--wds-get-default-profile-number=[3gpp|3gpp2]
Get default profile number
--wds-set-default-profile-number=[(3gpp|3gpp2),#]
Set default profile number
--wds-get-default-settings=[3gpp|3gpp2]
Get default settings
--wds-get-autoconnect-settings
Get autoconnect settings
--wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roaming-allowed|home-only)]]
Set autoconnect settings (roaming settings optional)
--wds-get-supported-messages
Get supported messages
--wds-reset
Reset the service state
--wds-bind-data-port=[a2-mux-rmnet0-7|#]
Bind data port to controller device to be used with `--client-no-release-cid'
--wds-bind-mux-data-port=["key=value,..."]
Bind qmux data port to controller device (allowed keys: mux-id, ep-type
(undefined|hsusb|pcie|embedded|bam-dmux), ep-iface-number) to be used with
`--client-no-release-cid'
--wds-set-ip-family=[4|6]
Set IP family
--wds-get-channel-rates
Get channel data rates
--wds-get-lte-attach-parameters
Get LTE attach parameters
--wds-get-max-lte-attach-pdn-num
Get the maximum number of LTE attach PDN
--wds-get-lte-attach-pdn-list
Get the list of LTE attach PDN
--wds-set-lte-attach-pdn-list=[#,#,...]
Set the list of LTE attach PDN
--wds-noop
Just allocate or release a WDS client. Use with `--client-no-release-cid' and/or `--client-cid'
PBM options:
--pbm-get-all-capabilities
Get all phonebook capabilities
--pbm-noop
Just allocate or release a PBM client. Use with `--client-no-release-cid' and/or `--client-cid'
PDC options:
--pdc-list-configs=[(platform|software)]
List all configs
--pdc-delete-config=[(platform|software),ConfigId]
Delete config
--pdc-activate-config=[(platform|software),ConfigId]
Activate config
--pdc-deactivate-config=[(platform|software),ConfigId]
Deactivate config
--pdc-load-config=[Path to config]
Load config to device
--pdc-monitor-refresh
Watch for refresh indications
--pdc-noop
Just allocate or release a PDC client. Use with `--client-no-release-cid' and/or `--client-cid'
UIM options:
--uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current PIN)]
Set PIN protection
--uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)]
Verify PIN
--uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)]
Unblock PIN
--uim-change-pin=[(PIN1|PIN2|UPIN),(old PIN),(new PIN)]
Change PIN
--uim-read-transparent=[0xNNNN,0xNNNN,...]
Read a transparent file given the file path
--uim-get-file-attributes=[0xNNNN,0xNNNN,...]
Get the attributes of a given file
--uim-read-record=["key=value,..."]
Read a record from given file (allowed keys: record-number, record-length, file
([0xNNNN-0xNNNN,...])
--uim-get-card-status
Get card status
--uim-get-supported-messages
Get supported messages
--uim-sim-power-on=[(slot number)]
Power on SIM card
--uim-sim-power-off=[(slot number)]
Power off SIM card
--uim-change-provisioning-session=["key=value,..."]
Change provisioning session (allowed keys: session-type, activate, slot, aid)
--uim-get-slot-status
Get slot status
--uim-switch-slot=[(slot number)]
Switch active physical slot
--uim-monitor-slot-status
Watch for slot status indications
--uim-reset
Reset the service state
--uim-monitor-refresh-file=[0xNNNN,0xNNNN,...]
Watch for REFRESH events for given file paths
--uim-monitor-refresh-all
Watch for REFRESH events for any file
--uim-get-configuration
Get personalization status of the modem
--uim-depersonalization=[(feature),(operation),(control key)[,(slot number)]]
Deactivates or unblocks personalization feature
--uim-remote-unlock=[XX:XX:...]
Updates the SimLock configuration data
--uim-noop
Just allocate or release a UIM client. Use with `--client-no-release-cid' and/or `--client-cid'
SAR options:
--sar-rf-get-state
Get RF state
--sar-rf-set-state=[(state number)]
Set RF state.
--sar-noop
Just allocate or release a SAR client. Use with `--client-no-release-cid' and/or `--client-cid'
WMS options:
--wms-get-supported-messages
Get supported messages
--wms-get-routes
Get SMS route information
--wms-set-routes=["key=value,..."]
Set SMS route information (keys: type, class, storage, receipt-action)
--wms-reset
Reset the service state
--wms-noop
Just allocate or release a WMS client. Use with `--client-no-release-cid' and/or `--client-cid'
WDA options:
--wda-set-data-format=["key=value,..."]
Set data format (allowed keys: link-layer-protocol (802-3|raw-ip), ul-protocol
(disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5), dl-protocol
(disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5), dl-datagram-max-size, dl-max-datagrams, ep-type
(undefined|hsusb|pcie|embedded), ep-iface-number, ul-datagram-max-size, ul-max-datagrams)
--wda-get-data-format=["key=value,..."]
Get data format (allowed keys: ep-type (undefined|hsusb|pcie|embedded), ep-iface-number); also
allows empty key list
--wda-get-supported-messages
Get supported messages
--wda-noop
Just allocate or release a WDA client. Use with `--client-no-release-cid' and/or `--client-cid'
VOICE options:
--voice-get-config
Get Voice service configuration
--voice-get-supported-messages
Get supported messages
--voice-noop
Just allocate or release a VOICE client. Use with `--client-no-release-cid' and/or `--client-cid'
LOC options:
--loc-session-id=[ID]
Session ID for the LOC session
--loc-start
Start location gathering
--loc-stop
Stop location gathering
--loc-get-position-report
Get position reported by the location module
--loc-get-gnss-sv-info
Show GNSS space vehicle info
--loc-timeout=[SECS]
Maximum time to wait for information in `--loc-get-position-report' and `--loc-get-gnss-sv-info'
(default 30s)
--loc-follow-position-report
Follow all position updates reported by the location module indefinitely
--loc-follow-gnss-sv-info
Follow all GNSS space vehicle info updates reported by the location module indefinitely
--loc-follow-nmea
Follow all NMEA trace updates reported by the location module indefinitely
--loc-delete-assistance-data
Delete positioning assistance data
--loc-get-nmea-types
Get list of enabled NMEA traces
--loc-set-nmea-types=[type1|type2|type3...]
Set list of enabled NMEA traces
--loc-get-operation-mode
Get operation mode
--loc-set-operation-mode=[default|msb|msa|standalone|cellid|wwan]
Set operation mode
--loc-get-engine-lock
Get engine lock status
--loc-set-engine-lock=[none|mi|mt|all]
Set engine lock status
--loc-noop
Just allocate or release a LOC client. Use with `--client-no-release-cid' and/or `--client-cid'
QoS options:
--qos-get-flow-status=[QoS ID]
Get QoS flow status
--qos-get-network-status
Gets the network status
--qos-swi-read-data-stats=[APN ID]
Read data stats (Sierra Wireless specific)
--qos-reset
Reset the service state
--qos-noop
Just allocate or release a QOS client. Use with `--client-no-release-cid' and/or `--client-cid'
GAS options:
--gas-dms-set-usb-composition=[pid]
Sets the USB composition
--gas-dms-get-usb-composition
Gets the current USB composition
--gas-dms-get-firmware-list
Gets the list of stored firmware
--gas-dms-get-active-firmware
Gets the currently active firmware
--gas-dms-set-active-firmware=[index]
Sets the active firmware index
--gas-noop
Just allocate or release a GAS client. Use with `--client-no-release-cid' and/or `--client-cid'
GMS options:
--gms-test-get-value
Gets test value
--gms-test-set-value=[mandatory-value][,[optional-value]]
Sets test value
--gms-noop
Just allocate or release a GMS client. Use with `--client-no-release-cid' and/or `--client-cid'
DSD options:
--dsd-get-apn-info=[(type)]
Gets the settings associated to a given APN type
--dsd-set-apn-type=[(name), (type1|type2|type3...)]
Sets the types associated to a given APN name
--dsd-get-system-status
Gets system status
--dsd-noop
Just allocate or release a DSD client. Use with `--client-no-release-cid' and/or `--client-cid'
DPM options:
--dpm-open-port=["key=value,..."]
Open port (allowed-keys: ctrl-ep-type, ctrl-ep-iface-number, ctrl-port-name, hw-data-ep-type,
hw-data-ep-iface-number, hw-data-rx-id, hw-data-tx-id, sw-data-ep-type, sw-data-ep-iface-number,
sw-data-port-name)
--dpm-close-port
Close port
--dpm-noop
Just allocate or release a DPM client. Use with `--client-no-release-cid' and/or `--client-cid'
FOX options:
--fox-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps]
Get firmware version
--fox-noop
Just allocate or release a FOX client. Use with `--client-no-release-cid' and/or `--client-cid'
ATR options:
--atr-send=[AT command]
Send an AT command and wait for the reply
--atr-send-only=[AT command]
Send an AT command without waiting for the reply
--atr-monitor
Watch for unsolicited indications
--atr-noop
Just allocate or release an ATR client. Use with `--client-no-release-cid' and/or `--client-cid'
IMSP options:
--imsp-get-enabler-state
Get IMSP enabler state
--imsp-noop
Just allocate or release a IMSP client. Use with `--client-no-release-cid' and/or `--client-cid'
IMSA options:
--imsa-get-ims-registration-status
Get IMS registration status
--imsa-get-ims-services-status
Get IMS services status
--imsa-noop
Just allocate or release a IMSA client. Use with `--client-no-release-cid' and/or `--client-cid'
IMS options:
--ims-get-ims-services-enabled-setting
Get IMS Services Enabled Setting
--ims-noop
Just allocate or release a IMS client. Use with `--client-no-release-cid' and/or `--client-cid'
Link management options:
--link-list=[IFACE]
List links created from a given interface
--link-add=[iface=IFACE,prefix=PREFIX[,mux-id=N][,flags=FLAGS]]
Create new network interface link
--link-delete=[link-iface=IFACE][,[mux-id=N]]
Delete a given network interface link
--link-delete-all=[IFACE]
Delete all network interface links from the given interface
qmi_wwan specific options:
-w, --get-wwan-iface
Get the associated WWAN iface name
-e, --get-expected-data-format
Get the expected data format in the WWAN iface
-E, --set-expected-data-format=[802-3|raw-ip|qmap-pass-through]
Set the expected data format in the WWAN iface
Application Options:
-d, --device=[PATH|URI]
Specify device path or QRTR URI (e.g. qrtr://0)
--get-service-version-info
Get service version info
--device-set-instance-id=[Instance ID]
Set instance ID
--device-open-version-info
Run version info check when opening device
--device-open-sync
Run sync operation when opening device
-p, --device-open-proxy
Request to use the 'qmi-proxy' proxy
--device-open-qmi
Open a cdc-wdm device explicitly in QMI mode
--device-open-mbim
Open a cdc-wdm device explicitly in MBIM mode
--device-open-auto
Open a cdc-wdm device in either QMI or MBIM mode (default)
--device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header]
Open device with specific link protocol and QoS flags
--client-cid=[CID]
Use the given CID, don't allocate a new one
--client-no-release-cid
Do not release the CID when exiting
-v, --verbose
Run action with verbose logs, including the debug ones
--verbose-full
Run action with verbose logs, including the debug ones and personal info
--silent
Run action with no logs; not even the error/warning ones
-V, --version
Print version
COPYRIGHT
Copyright © 2012-2023 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later
<http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent
permitted by law.
SEE ALSO
The full documentation for qmicli is maintained as a Texinfo manual. If the info and qmicli programs are
properly installed at your site, the command
info qmicli
should give you access to the complete manual.
qmicli 1.35.2 March 2024 QMICLI(1)