Provided by: pagure-doc_5.11.3+dfsg-2.1ubuntu0.1_all 
NAME
pagure - Pagure Documentation
Pagure is a light-weight git-centered forge based on pygit2.
Features:
• Open-sources: Web-interface for the git repositories
• Flexibility: Ability to create any project you want
• One place: Keep your documentation and tickets in pagure
• Collaboration: Fork a project and make a pull-request
• Integration: Create pull-request from a fork hosted somewhere else than in pagure
• Open data: Sources, doc, ticket and pull-requests meta-data are available in the web interface but also
in git repos which can thus be cloned and changed locally.
• Freedom: Pagure is fully Free and Open-Source Software!
Resources:
• Home page
• Git repository
• Github mirror
Contents:
OVERVIEW
Pagure is split over multiple components, each having their purpose and all but two (the core web
application and its workers) being optional.
These components are:
Contents
• Overview
• Pagure core application
• Pagure workers
• Gitolite
• Pagure doc server
• Pagure milter
• Pagure EventSource Server
• Pagure web-hook Server
• Pagure load JSON service
• Pagure log com service
Before going into the overall picture, one should realize that most of the components listed above are
optional.
Here is a diagram representing pagure without all the optional components:
And here is a diagram of all the components together: .SS Pagure core application
The core application is the flask application interacting with gitolite to provide a web UI to the git
repositories as well as tickets and pull-requests. This is the main application for the forge.
Pagure workers
Interacting with git repos can be a long process, it varies depending on the size of the repository
itself but also based on hardware performances or simply the load on the system. To make pagure capable
of handling more load, since pagure 3.0 the interactions with the git repositories from the web UI is
performed by dedicated workers, allowing async processing of the different tasks.
The communication between the core application and its worker is based on celery and defaults to using
redis but any of the queueing system supported by celery could be used instead.
Gitolite
Currently pagure uses gitolite to grant or deny ssh access to the git repositories, in other words to
grant or deny read and/or write access to the git repositories.
Pagure supports cloning over both ssh and http, but writing can only be done via ssh, through gitolite.
Pagure doc server
While integrated into the main application at first, it has been split out for security concern,
displaying information directly provided by the user without a clear/safe way of filtering for unsafe
script or hacks is a security hole. For this reason we also strongly encourage anyone wanting to deploy
their own instance of pagure with the doc server, to run this application on a completely different
domain name (not just a sub-domain) in order to reduce the cross-site forgery risks.
Pagure can be run just fine without the doc server, all you need to do is to not define the variable
DOC_APP_URL in the configuration file.
Pagure milter
The milter is a script, receiving an email as input and performing an action with it.
In the case of pagure, the milter is used to allow replying on a comment of a ticket or a pull-request by
directly replying to the notification sent. No need to go to the page anymore to reply to a comment
someone made.
The milter integrates with a MTA such as postfix or sendmail that you will have running and have access
to in order to change its configuration.
Pagure EventSource Server
Eventsource or Server Sent Events are messages sent from a server to a browser.
For pagure this technology is used to allow live-refreshing of a page when someone is viewing it. For
example, while you are reading a ticket if someone comments on it, the comment will automatically show up
on the page without the need for you to reload the entire page.
The flow is: the main pagure server does an action, sends a message over redis, the eventsource server
picks it up and send it to the browsers waiting for it, then javascript code is executed to refresh the
page based on the information received.
Pagure web-hook Server
Sends notifications to third party services using POST http requests.
This is the second notifications system in pagure with fedmsg. These notifications are running on their
own service to prevent blocking the main web application in case the third part service is timing-out or
just being slow.
The flow is: the main pagure server does an action, sends a message over redis, the web-hook server picks
it up, build the query and performs the POST request to the specified URLs.
Pagure load JSON service
The load JSON service is an async service updating the database based on information pushed to the ticket
or pull-request git repositories. This allows updating the database with information pushed to the git
repositories without keeping the connection open with the client.
Pagure log com service
The log com (for log commit) service is an async service updating the log table of the database on every
pushed made to any repository allowing to build the data for the calendar heatmap graph displayed on
every user's page.
USAGE
Using pagure should come fairly easily, especially to people already used to forges such as GitHub or
GitLab. There are however some tips and tricks which can be useful to know and that this section of the
doc covers.
One of the major difference with GitHub and GitLab is that for each project on pagure, four git
repositories are made available:
• A git repository containing the source code, displayed in the main section of the pagure project.
• A git repository for the documentation
• A git repository for the issues and their metadata
• A git repository for the metadata for pull-requests
Issues and pull-requests repositories contain the meta-data (comments, notifications, assignee...) from
the issues and pull-request. They are are not public and only available to admins and committers of the
project, since they may contain private information.
You can use these repositories for offline access to your tickets or pull-requests (the pag-off project
for example relies on a local copy of the issue git repository). They are designed to allow you to have
full access to all the data about your project. One of the original idea was also to allow syncing a
project between multiple pagure instances by syncing these git repositories between the instances.
You can find the URLs to access or clone these git repositories on the overview page of the project. On
the top right of the page, in the drop-down menu entitled Clone. Beware that if documentation, the issue
tracker or the pull-requests are disabled on the project, the corresponding URL will not be shown.
Contents:
First Steps on pagure
When coming to pagure for the first time there are a few things one should do or check to ensure all
works as desired.
Login to pagure or create your account
Pagure has its own user account system.
For instances of pagure such as the one at pagure.io where the authentication is delegated to a third
party (in the case of pagure.io, the Fedora Account System) via OpenID, the local user account is created
upon login.
This means, you cannot be added to a group or a project before you login for the first time as the system
will simply not know you.
If you run your own pagure instance which uses the local authentication system, then you will find on the
login page an option to create a new account.
Upload your SSH key
Pagure uses gitolite to manage who has read/write access to which git repository via ssh.
An ssh key is composed of two parts:
• a private key, which you must keep to yourself and never share with anyone.
• a public key, which is public and therefore can be shared with anyone.
If you have never generated a ssh key, you can do so by running:
ssh-keygen
or alternatively on GNOME using the application seahorse.
This will create two files in ~/.ssh/ (~ is the symbol for your home folder).
These two files will be named (for example) id_rsa and id_rsa.pub. The first one is the private key that
must never be shared. The second is the public key that can be uploaded on pagure to give you ssh access.
To upload your public key onto pagure:
1. Login into pagure and click on the user icon on the top right corner, there, select My settings.
2. In the authentication section of your user settings copy the content of your id_rsa.pub file in the
Public SSH key text box and save your ssh key settings. .sp NOTE:
Pagure supports multiple ssh keys per user. To add more than one ssh key to your user account just add
your new ssh key in your authentication settings (one key per row), this way you will be able to push
commits to your repository from a different computer.
Configure the default email address
If the pagure instance you use is using local user authentication, you can choose whichever email address
you prefer to use during account creation. But in the case (like pagure.io) where the pagure instance
relies on an external authentication service, the email address provided by this service may be different
from the one you prefer.
The settings page of your account (see above for how to access the page) allows you to add multiple email
addresses and set one as default.
Your default email address is the address that will be used to send you notifications and also as the
email address in the git commit if you merge a pull-request with a merge commit.
For online editing, when doing the commit, you will be presented with the list of valid email addresses
associated with your account and you will be able to choose which one you wish to use.
NOTE:
All email addresses will need to be confirmed to be activated, this is done via a link sent by email
to the address. If you do not receive this link, don't forget to check your spam folder!
Forks
A fork in Pagure is a copy of a repository. When contributing to a project on Pagure, the first step is
to fork it. This gives you a place to make changes to the project and, if you so wish, contribute back to
the original project. If you're not already familiar with Git's distributed workflow, the Pro Git book
has an excellent introduction.
You can see a list of projects you've forked on your home page.
Create a Fork on Pagure
To fork a project, simply navigate to the project on Pagure and click the fork button. You will then be
redirected to your new fork.
Configure your Local Git Repository
Now that you have forked the project on Pagure, you're ready to configure a local copy of the repository
so you can get to work. First, clone the repository. The URL for the repository is on the right-hand side
of the project overview page. For example:
$ git clone ssh://git@pagure.io/forks/jcline/pagure.git
$ cd pagure
After cloning your fork locally, it's a good idea to add the upstream repository as a git remote. For
example:
$ git remote add -f upstream ssh://git@pagure.io/pagure.git
This lets you pull in changes that the upstream repository makes after you forked. Consult Git's
documentation for more details.
Pushing Changes
After you Configure your Local Git Repository you're ready to make your changes and contribute them
upstream. First, start a new branch:
$ git checkout -b my-feature-or-bugfix
It's a good idea to give the branch a descriptive name so you can find it later. Next, make your
changes. Once you're satisfied, add the changes to Git's staging area and commit the changes:
$ git add -A # add all changes
$ git commit -s # prepare changes for upload
Your text editor of choice will open and you can write your commit message. If you have not done so
already Upload your SSH key now. Afterwards, you are ready to push your changes to your remote fork:
$ git push -u origin my-feature-or-bugfix # upload changes
In case you cloned the repo via HTTP, for example using a command like git clone https://..., the push
will fail. Pagure.io does not support pushing over HTTP. An easy workaround is to use:
$ git push -u origin my-feature-or-bugfix ssh://git@pagure.io/forks/jcline/pagure.git
You are now ready to Open a Pull Request.
Understanding Read Only Mode of projects
If a project is in Read Only Mode, the users of the project may not be able to modify the git repository
of the project. Let's say you forked a project, then the forked project goes into a read only mode. You
won't be able to modify the git repository of the forked project in that mode. After the read only mode
is gone, you can begin to use the git repository again. Let's say you decide to add another user to your
fork, this time the project will go in read only mode again but, you still will be able to use the git
repository while the new user will have to wait for read only mode to get over. This is also true when
you remove a user from your project. The removed user can still access the project's git repository,
given that he had at least commit access, until the read only mode is over.
In Pagure, we use gitolite for Access Control Lists when using SSH. Modifying gitolite may be a time
taking task (depending on number of projects hosted on the pagure instance) that's why Pagure does it
outside of HTTP Request-Response Cycle.
Whenever you fork a project or add/remove a new user/group to project, gitolite needs to be refreshed in
order to put those changes in effect for ssh based git usage.
Actions that put the project in read only mode
All the actions that needs gitolite to be compiled, will bring the project in read only mode.
• Creating/Forking a project. (only the fork will be in read only mode)
• Adding/Removing a user/group from a project.
HTTP PUSH
When using git push over http against a pagure instance, there are two situations to distinguish.
Git push over http with API token
This is going to be the most supported approach. Any user can generate API tokens with the commit ACL
which reads in the UI as: Commit to a git repository via http(s). These API tokens can be specific to a
project if generated in the settings page of the project, or generic to all projects if generated in the
user's settings page. In either case, they will no work if the user does not have at commit access to
the project.
Once the API token has been generate, the user needs to enter it with git prompts for a password (instead
of their actual password).
For example:
$ git push
username: pingou
password: ABC123...
Git push over http with Username & Password
This is only supported on pagure instance that are using the local authentication system (ie: where
pagure manages the registration of the user accounts, email confirmation, etc).
For these pagure instances and for these only, when being prompted by git for an username and password
the user can choose to enter either their username and actual password or their username and an API
token.
Storing the password/token
If you interact with git regularly, typing you password or API token will quickly become tiring.
Thanksfully, git has a built-in mechanism named git credential store which can take care of this for you.
You can use two modes for the store, either cache or store. - cache will cache your credential in memory
for 15 minutes (by default) - store will actually store your credentials in plain text on disk
You can set this using either:
$ git config credential.helper store
$ git config credential.helper cache
The timeout of the cache can be configured using:
$ git config credential.helper 'cache --timeout=3600'
Where the timeout value is a number of seconds (so here the cache is extended to one hour).
Finally, if you wish to use this configuration on multiple project, you can add the --global argument to
these commands which will make the configuration work for all your git repo instead of just the one in
which you run the command.
Pull Requests
Pagure uses the concept of pull requests to contribute changes from your fork of a project back to the
upstream project. To contribute a change to a project you first open a pull request with original
project. The project maintainer then merges the pull request if they are satisfied with the changes you
have proposed.
Open a Pull Request
Before you can open a pull request, you need to complete the First Steps on pagure and Create a Fork on
Pagure of the project you would like to contribute to. Once you have a fork and you have pushed a git
branch containing one or more commits, you are ready to contribute to the project.
Pagure to Pagure pull request
You can create a pull request from a pagure project, using one of the following options
From the project overview
1. Go the the overview tab of your fork.
2. Locate your feature branch (Right hand side), and press the button New PR button.
3. Fill the Create a pull request form (Title and Description) and create your pull request.
Notes: The New PR button appears only if there are commits not available in the main branch. .SS From
the commits history
1. Go to the commit tab of your fork and select your feature branch.
2. Press the create pull request button (above the latest commits).
3. Fill the Create a pull request form (Title and Description) and create your pull request.
.SS From the pull requests list
1. Go to the main project's (not your fork) pull requests list and press the File Pull Request button.
2. Select the feature branch containing your changes from the dropdown menu.
3. Fill the Create a pull request form (Title and Description) and create your pull request.
.SS Remote Git to Pagure pull request
You can create a pull request from another git hosting platform (e.g. GitHub, GitLab). This is a remote
pull request.
From the pull requests list
1. Go to the main project's (not your fork) pull requests list and press the File Pull Request button.
2. Select the Remote pull-request option from the dropdown menu.
3. Fill the New remote pull-request form (Title, Git repo address and Git branch) and create your remote
pull request.
Congratulations! It is now up to the project maintainer to accept your changes by merging them.
Updating Your Pull Request
It is likely that project maintainers will request changes to your proposed code by commenting on your
pull request. Don't be discouraged! This is an opportunity to improve your contribution and for both
reviewer and reviewee to become better programmers.
Adding to your pull request is as simple as pushing new commits to the branch you used to create the pull
request. These will automatically be displayed in the commit list for the pull request.
Rebasing
You may encounter a situation where you want to include changes from the master branch that were made
after you created your pull request. You can do this by rebasing your pull request branch and pushing it
to your remote fork.
Working with Pull Requests
It's quite common to work with a pull request locally, either to build on top of it or to test it. You
can do this easily using git fetch to download the pull request followed by git checkout to work with it
as you would any local branch. The syntax for git fetch is:
git fetch $REMOTE pull/$PR_NUMBER/head:$BRANCHNAME
For example, if you have PR#1 which "adds support for foo" you might run:
git fetch origin pull/1/head:add-foo-support
Then you can work with the add-foo-support normally:
git checkout add-foo-support
NOTE:
You may use / characters in your branch name if you want to group your pull requests by the submitter
name, bug number, etc. For example, you could name your local branch user/add-foo-support.
If you want to allow working with all of your pull requests locally, you can do so by editing your git
configuration as follows. Locate your remote in the .git/config file, for example:
[remote "origin"]
url = ssh://git@pagure.io/pagure.git
fetch = +refs/heads/*:refs/remotes/origin/*
Now add this line:
fetch = +refs/pull/*/head:refs/remotes/origin/pr/*
to that section as the first fetch line, like this:
[remote "origin"]
url = ssh://git@pagure.io/pagure.git
fetch = +refs/pull/*/head:refs/remotes/origin/pr/*
fetch = +refs/heads/*:refs/remotes/origin/*
Obviously, the remote URL should be matching the URL of your project (pagure project in this example).
Now you can fetch the all the pull requests:
$ git fetch origin
From ssh://pagure.io/pagure
* [new ref] refs/pull/2541/head -> origin/pr/2541
* [new ref] refs/pull/2540/head -> origin/pr/2540
* [new ref] refs/pull/2538/head -> origin/pr/2538
To checkout a particular pull request:
$ git checkout pr/25413
Branch pr/2541 set up to track remote branch pr/2541 from origin.
Switched to a new branch 'pr/2541'
You will now be able to use this branch to work from or on this pull requests.
If you are only interested in one particular pull request and do not want to fetch all the project PRs,
you can add to your ~/.bashrc the following function:
function pullpr {
remote="${2:-origin}"
git fetch $remote pull/$1/head:pr_$1
git checkout pr_$1
}
Then after sourcing your ~/.bashrc or restarting your shell, you can use the pullpr function to checkout
a pull request from within the clone of the git repository. For example checkout pull request number 58
from current git clone (here the infra-docs project)
$ source ~/.bashrc
$ pullpr 58
remote: Counting objects: 393, done.
remote: Compressing objects: 100% (238/238), done.
remote: Total 365 (delta 231), reused 255 (delta 127)
Receiving objects: 100% (365/365), 71.36 KiB | 63.00 KiB/s, done.
Resolving deltas: 100% (231/231), completed with 20 local objects.
From ssh://pagure.io/infra-docs
* [new ref] refs/pull/58/head -> pr_58
Switched to branch 'pr_58'
Using Markdown in Pagure
Pagure uses Markdown syntax highlighting as the base for formatting comments in issues, pull requests,
and in Markdown files in repositories. For basic formatting, Pagure follows common Markdown formatting,
but it also has some unique syntax for more advanced formatting. This help page helps demonstrate how to
use Markdown in Pagure.
Pagure relies on the Markdown python module to do the conversion. It has enabled a few extensions:
• Definition Lists
• Fenced Code Blocks
• Tables
• Smart Strong
• Admonition
• CodeHilite
• Sane lists
README files can also rely on:
• Abbreviations
• Footnotes
• Table of Contents
While comments use:
• New Line to Break
WARNING:
Pagure does not support linking to remote images, if you want to link to an image on a ticket, you
will have to upload it to pagure.
Styling
You can mark up text with bold, italics, or strikethrough.
•
Style: Bold
• Syntax: ** ** or __ __
• Example: **This is bold text**
• Output: This is bold text
•
Style: Italics
• Syntax: * * or _ _
• Example: _This is italicized text_
• Output: This is italicized text
•
Style: Strikethrough
• Syntax: ~~ ~~
• Example: ~~This text is no longer relevant~~
• Output: This text is no longer relevant
•
Style: Bold and italics
• Syntax: ** ** and _ _
• Example: ** This text is the _most important thing ever_ **
• Output: ** This text is the most important thing ever **
Quoting
You can show text as being quoted with the > character.
Before merging this pull request, remember Clark Kent mentioned this:
> Double-check there's no reference to the Kryptonite library in the program since we removed that a few versions ago.
Before merging this pull request, remember Clark Kent mentioned this:
Double-check there's no reference to the Kryptonite library in the program since we removed that a few
versions ago.
You can also make a line-wrapping blockquote using <br/>.
Remember what Solomon said:
> I don't want to survive. <br/> I want to live.
Remember what Solomon said:
I don't want to survive.
I want to live.
For more details regarding Blockquote, refer Blockquote.
Code
You can highlight parts of a line as code or create entire code blocks in your Markdown documents. You
can do this with the backtick character (`). Text inside of backticks will not be formatted.
When running the program for the first time, use `superman --initialize`.
When running the program for the first time, use superman --initialize.
To format multiple lines of code into its own block, you can wrap the text block with four tilde (~)
characters
Install the needed system libraries:
`~~~~`
sudo dnf install git python-virtualenv libgit2-devel \
libjpeg-devel gcc libffi-devel redhat-rpm-config
`~~~~`
Install the needed system libraries:
sudo dnf install git python-virtualenv libgit2-devel \
libjpeg-devel gcc libffi-devel redhat-rpm-config
Hyperlinks
Regular links
Need to embed a link to somewhere else? No problem! You can create an in-line link by wrapping the text
in [ ] and appending the URL in parentheses ( ) immediately after.
Pagure is used by the [Fedora Project](https://fedoraproject.org).
Pagure is used by the Fedora Project.
Links to ticket/PR of the same project
You want to link to a ticket or a pull-request in the current project? Easy just use # immediately
followed by the identifier of the ticket or pull-request.
This is an example for #2921
This is an example for #2921
Links to ticket/PR of another project
You want to link to a ticket or a pull-request of a different project? Simply add the project name in
front of the # and immediately followed by the identifier of the ticket or pull-request.
This is an example for pagure#2921
This is an example for pagure#2921
Lists
Unordered lists
You can make unordered lists spanning multiple lines with either - or *.
* Superman
* Batman
* Protector of Gotham City!
* Superwoman
* Harley Quinn
* Something on this list is unlike the others...
• Superman
•
Batman
• Protector of Gotham City!
• Superwoman
•
Harley Quinn
• Something on this list is unlike the others...
Ordered lists
You can make ordered lists by preceding each line with a number.
1. Superman
2. Batman
1. Protector of Gotham City!
2. He drives the Batmobile!
3. Superwoman
4. Harley Quinn
1. Something on this list is unlike the others...
2. Somebody evil lurks on this list!
1. Superman
2.
Batman
1. Protector of Gotham City!
2. He drives the Batmobile!
3. Superwoman
4.
Harley Quinn
1. Something on this list is unlike the others...
2. Somebody evil lurks on this list!
Tagging users
You can tag other users on Pagure to send them a notification about an issue or pull request. To tag a
user, use the @ symbol followed by their username. Typing the @ symbol in a comment will bring up a list
of users that match the username. The list searches as you type. Once you see the name of the person you
are looking for, you can click their name to automatically complete the tag.
@jflory7, could you please review this pull request and leave feedback?
@jflory7, could you please review this pull request and leave feedback?
Tagging issues or pull requests
In a comment, you can automatically link a pull request or issue by its number. To link it, use the #
character followed by its number. Like with tagging users, Pagure will provide suggestions for issues or
pull requests as you type the number. You can select the issue in the drop-down to automatically tag the
issue or pull request.
If you need to tag an issue or pull request that is outside of the current project, you are also able to
do this. For cross-projects links, you can tag them by typing <project name>#id or <username>/<project
name>#id.
Emoji
Pagure natively supports emoji characters. To use emoji, you can use two colons wrapped around the emoji
keyword (:emoji:). Typing a colon by itself will bring up a list of suggested emoji with a small preview.
If you see the one you are looking for, you can click it to automatically complete the emoji.
I reviewed the PR and it looks good to me. :+1: Good to merge! :clapper:
I reviewed the PR and it looks good to me. 👍 Good to merge! 🎬
Improve this documentation!
Notice anything that can be improved in this documentation? Find a mistake? You can improve this page!
Find it in the official Pagure repository.
Project settings
Each project have a number of options that can be tweaked in the settings page of the project which is
accessible to the person having full commits to the project.
This page presents the different settings and there effect.
Always merge
This Boolean enables or disables always making a merge commit when merging a pull-request.
When merging a pull-request in pagure there are three states:
• fast-forward: when the commits in the pull-request can be fast-forwarded pagure signals it and just
fast-forward the commit, keeping the history linear.
• merge: when the commits in the pull-request cannot be merged without a merge commit, pagure signals it
and performs this merge commit.
• conflicts: when the commits in the pull-request cannot be merged at all automatically due to one or
more conflicts. Then pagure signals it and prevent merging.
If the Always merge option is on, then the fast-forward option above is disabled in favor of the merge
option.
Comment editing
This Boolean enables or disables editing comments.
After commenting on a ticket or a pull-request, the admins of the project and the author of the comment
may be allowed to edit the comment. This allows them to adjust the wording or the style as they wish.
NOTE:
notification about a comment is only sent once with the original text, changes performed later will
not trigger a new notification.
Some project may not want to allow editing comments after they were posted and this setting allows
turning it on or off.
Enforce signed-off commits in pull-request
This Boolean enables or disables checking for a 'Signed-off-by' line (case insensitive) in the commit
messages of the pull-requests.
If this line is missing, pagure will display a message near the Merge button, allowing project admin to
request the PR to be updated.
NOTE:
This setting does not prevent commits without this 'signed-off-by' line to be pushed directly, it only
work at the pull-request level.
Issue tracker
This Boolean simply enables or disables the issue tracker for the project. So if you are tracking your
ticket on a different system, you can simply disable reporting issue on pagure by un-checking this
option.
Minimum score to merge pull-request
This option can be used for project wishing to enforce having a minimum number of people reviewing a
pull-request before it can be merged.
If this option is enabled, anyone can vote in favor or against a pull-request and the sum of the votes in
favor minus the sum of the votes against give the pull-request a score that should be equal or greater
than the value entered in this option for the pull-request to be allowed to be merged.
NOTE:
Only the main comments (i.e.: not in-line) are taken into account to calculate the score of the
pull-request.
To vote in favor of a pull-request, use either: * +1 * :thumbsup:
To vote against a pull-request, use either: * -1 * :thumbsdown:
NOTE:
Pull-Request not reaching the minimum score are not automatically merged
NOTE:
Anyone can vote on the pull-request, not only the contributors.
NOTE:
Only one vote per person is taken into account to compute the final score.
Only assignee can merge pull-request
This option can be used for project wishing to institute a strong review workflow where pull-request are
first assigned then merged.
If this option is enabled, only the person assigned to the pull-request can merge it.
Project documentation
Pagure offers the option to have a git repository specific for the documentation of the project.
This repository is then accessible under the Docs tab in the menu of the project.
If you prefer to store your documentation elsewhere or maybe even within the sources of the project, you
can disable the Docs tab by un-checking this option.
Pull requests
Pagure offers the option to fork a project, make changes to it and then ask the developer to merge these
changes into the project. This is similar to the pull-request mechanism on GitHub or GitLab.
However, some projects may prefer receiving patches by email on their list or via another hosting
platform or simply do not wish to use the pull-request mechanism at all. Un-checking this option will
therefore prevent anyone from opening a pull-request against this project.
NOTE:
disabling pull-requests does not disable forking the projects.
Web-hooks
Pagure offers the option of sending notification about event happening on a project via
[web-hooks|https://en.wikipedia.org/wiki/Webhook]. This option is off by default and can be turned on for
a pagure instance in its configuration file.
The URL of the web-hooks can be entered in this field.
NOTE:
See the notifications documentation to learn more about web-hooks in pagure and how to use them.
Tags
Pagure allows you to define "tags" that can be added to Issues. Tags are unique to each project, and
they can only be defined in the project settings page. The Tag color can also be customized for a more
robust visual representation of the tag.
Deploy keys
Deploy keys are SSH keys that have access to pull/push only to a single project. Upon creation, admins
can determine whether this particular key has read/write access or read-only.
Project Level Access Control
Till release 2.12, pagure had a very simple user model. If we added a new user or a new group to a
project, the user/group would be an admin of the project. The user/group could do everything from
changing the status of an issue to adding or removing any user on the project. With project ACL feature,
we allow a more fine grained control over what a new user/group has access to, what things it can add or
what actions it can take.
With Project ACL feature, We can now have three levels of access:
• Ticket: A user or a group with this level of access can only edit metadata of an issue. This includes
changing the status of an issue, adding/removing tags from them, adding/removing assignees and every
other option which can be accessed when you click "Edit Metadata" button in an issue page. However,
this user can not "create" a new tag or "delete" an existing tag because, that would involve access to
settings page of the project which this user won't have. It also won't be able to "delete" the issue
because, it falls outside of "Edit Metadata".
• Commit: A user or a group with this level of access can do everything what a user/group with ticket
access can do + it can do everything on the project which doesn't include access to settings page. It
can "Edit Metadata" of an issue just like a user with ticket access would do, can merge a pull request,
can push to the main repository directly, delete an issue, cancel a pull request etc.
• Admin: The user/group with this access has access to everything on the project. All the "users" of the
project that have been added till now are having this access. They can change the settings of the
project, add/remove users/groups on the project.
Add/Update Access
• Every time you add a new user or a new group to the project, you will be asked to provide the level of
access you want to give to that user or group. It's a required field in the form.
• To add a user or a group to a project, go to settings page of the project. There are buttons with text:
Add User and Add Group. It will take you to a different page where you will have to select the user or
group (depending on whether you clicked Add User or Add Group) and the access you want the user/group
to have.
• If you want to update a user or a group's access, go to settings page of the project. There is a
section which lists users associated with the project with the buttons to edit their access and a
different button to remove them from the project. If you click the edit button, you will be taken to a
different page where you can change the access and then click on Update button.
Points to be noted
• The creator of a project in pagure holds a more unique position than a normal user with admin access.
The creator can not be removed by an admin. His access level can not be changed. But, an admin's access
can be updated by a fellow admin or the creator himself.
• All the members of a group will have same access over the project except for the case mentioned in the
next point.
• In cases when, a user is added to a project with an access level of "A" and a group is also added to
the same project with access level "B" and that user is also present in the group then, the user will
enjoy the access of higher of "A" and "B". Meaning, if the user earlier had access of ticket and the
group had access of commit, the user will enjoy the access of a committer. And, if the user earlier had
access of commit and the group had access of ticket, the user will still be a committer.
Using the roadmap feature
Pagure allows building the roadmap of the project using the tickets and their milestones.
The principal is as follow:
• For each milestones defined in the settings of the project, the roadmap will group tickets with the
corresponding milestone.
• If your project has an unplanned milestone, this milestone will be shown at the bottom of the roadmap
page. This allowing you to put something on the roadmap without assigning a real milestone to it.
Example
For a project named test on pagure.io.
• First, go to the settings page of the project, create the milestones you like, for example: v1.0 and
v2.0.
• For the tickets you want to be on these milestones, go through each of them and set their milestone to
either v1.0 or v2.0, or none of them if the ticket is not on the roadmap. You can set the milestone on
the metadata panel on the right side of the issue page.
• And this is how it will look like
.SS Flags
Pagure offers the possibility to flag pull-requests and commits. A flag is a way for a third-party tool
to provide feedback on a pull-request or a commit.
This feedback can be as simple as the outcome of running the tests, or some lint tool, or test coverage
evolution.
Add a flag
Flags can be set via the API, see the /api/ URL in your pagure instance or at pagure.io/api/ and look for
the endpoints with the titles: Flag a commit or Flag a pull-request.
• uid: the API endpoints to add flag have an optional UID argument. It is a unique identifier (of maximum
32 characters) that is unique the commit or pull-request that is being/has been flagged. If it is not
specified by the user/tool adding the flag, it will be automatically generated and in either case, will
be returned in the JSON data returned by the API endpoints. Note that this is the only time you would
be able to retrieve this identifier if you do not specify it yourself.
• status: this field indicates the status of the task in the system running it. Pagure supports the
following statuses:
• success: the task ended successfully.
• canceled: the task was canceled.
• failure: the task ended but failed.
• error: the task did not end at all.
• pending: the results of this task are pending. (for failure vs error think of the test system ran
the tests but they failed vs the test system did not get to run the tests)
• percent: this is an optional field which can be used to provide some more details about the outcome of
the task. For example this could be used for test coverage, or the number of test that failed/passed.
• username: the name of the system running the tests. While not being restricted in length, a shorter
name will render better in the interface.
• comment: a free text form not restricted in length (however, here as well if the comment is too long it
may render off in the interface).
• url: the URL the flag is linked to and where the user should be able to retrieve more information about
the task and its outcome.
Example of two flags on a commit:
.SS Example of two flags on a pull-request: .SS Magic Words
Magic words are words and constructs you can use in your commit message to make pagure act on tickets or
pull-requests.
Enabling magic words
These magic words are enabled if the pagure git hook is enable. To do so, go to your project's settings
page, open the Hooks tab and activate there the Pagure hook.
Using magic words
To reference an issue/PR you need to use one of recognized keywords followed by a reference to the issue
or PR, separated by whitespace and and optional colon. Such references can be either:
• The issue/PR number preceded by the # symbol
• The full URL of the issue or PR
If using the full URL, it is possible to reference issues in other projects.
The recognized keywords are:
• fix/fixed/fixes
• relate/related/relates
• merge/merges/merged
• close/closes/closed
• resolve/resolves/resolved
Examples:
• Fixes #21
• related: https://pagure.io/myproject/issue/32
• this commit merges #74
• Merged: https://pagure.io/myproject/pull-request/74
Capitalization does not matter; neither does the colon (:) between keyword and number.
Using the doc repository of your project
In this section of the documentation, we are interested in the doc repository.
The doc repository is a simple Git repo. It can be displayed as a subfolder of a project or as a
dedicated Git repo. Either way its content can be displayed in 2 ways:
• inline under the Docs tab in Pagure:
• https://pagure.io/docs/<project>/ or
• https://pagure.io/docs/<namespace>/<project>/
• standalone:
• https://docs.pagure.org/<project>/ or
• https://docs.pagure.org/<namespace>.<project>/
By default the Docs tab in the project's menu is disabled, you will have to visit the project's settings
page and turn it on in the Project options section.
The URL to clone the doc repo is:
• https://pagure.io/docs/<namespace>/<project>.git
To view the doc source files in the browser:
• if the doc repo is kept in the project's sources, use the project's website
• if the doc repo is a dedicated repo, use https://pagure.io/<namespace>/<name>
Different file types can be used for your documentation in this repo:
• simple text files
Pagure will display them as plain text. If one of these is named index it will be presented as the
front page.
• RST or markdown files
Pagure will convert them to HTML on the fly and display them as such. The RST files must end with .rst
and the markdown ones must end with .mk, .md or simply .markdown.
• HTML files
Pagure will simply show them as such.
Updating documentation hosted in a dedicated repo is like using other repos.
Example
Pagure's documentation is kept in pagure's sources, in the doc folder there. You can see it at:
https://pagure.io/pagure/blob/master/f/doc. This doc can be built with Sphinx to make it HTML and
prettier.
The built documentation is available at: https://docs.pagure.org/pagure/.
This is how it is built/updated:
• Clone pagure's sources:
git clone https://pagure.io/pagure.git
• Move into its doc folder:
cd pagure/doc
• Build the doc:
make html
• Clone pagure's doc repository:
git clone ssh://git@pagure.io/docs/pagure.git
• Copy the result of sphinx's build to the doc repo:
cp -r _build/html/* pagure/
• Go into the doc repo and update it:
cd pagure
git add .
git commit -am "Update documentation"
git push
• Clean the sources:
cd ..
rm -rf pagure # remove the doc repo
rm -rf _build # remove the output from the sphinx's build
To make things simpler, the following script (name update_doc.sh) can be used:
#!/bin/bash
make html
git clone "ssh://git@pagure.io/docs/$1.git"
cp -r _build/html/* $1/
(
cd $1
git add .
git commit -av
git push
)
rm -rfI _build
rm -rfI $1
It can be used by running update_doc.sh <project> from within the folder containing the doc.
So for pagure it would be something like:
cd pagure/doc
update_doc.sh pagure
Using web-hooks
Web-hooks are a notification system that could be compared to a callback. Basically, pagure will make a
HTTP POST request to one or more third party server/application with information about what is or just
happened.
Activating web-hooks notifications
To set-up a web-hook, simply go to the settings page of your project and enter the URL to the
server/endpoint that will receive the notifications. If you wish to enter multiple URLs, enter one per
line. To stop all notifications, clear out that field.
Pagure will send a notification to this/these URL(s) for every action made on this project: new issue,
new pull-request, new comments, new commits...
NOTE:
The notifications sent via web-hooks have the same payload as the notifications sent via fedmsg.
Therefore, the list of pagure topics as well as example messages can be found in the fedmsg
documentation about pagure
Authenticating the notifications
There is, in the settings page, a web-hook key which is used by the server (here pagure) to sign the
message sent and which you can use to ensure the notifications received are coming from the right source.
Each POST request made contains some specific headers:
X-Pagure
X-Pagure-Project
X-Pagure-Signature
X-Pagure-Signature-256
X-Pagure-Topic
X-Pagure contains URL of the pagure instance sending this notification.
X-Pagure-Project contains the name of the project on that pagure instance.
X-Pagure-Signature contains the signature of the message allowing to check that the message comes from
pagure.
X-Pagure-Signature-256 contains the SHA-256 signature of the message allowing to check that the message
comes from pagure.
NOTE:
These headers are present to allow you to verify that the webhook was actually sent by the correct
Pagure instance. These are not included in the signed data.
X-Pagure-Topic is a global header giving a clue about the type of action that just occurred. For example
issue.edit.
WARNING:
The headers X-Pagure, X-Pagure-Project and X-Pagure-Topic are present for convenience only, they are
not signed and therefore should not be trusted. Rely on the payload after checking the signature to
make any decision.
Pagure relies on hmac to sign the content of its messages. If you want to validate the message, in
python, you can do something like the following:
import hmac
import hashlib
payload = # content you received in the POST request
headers = # headers of the POST request
project_web_hook_key = # private web-hook key of the project
hashhex = hmac.new(
str(project_web_hook_key), payload, hashlib.sha1).hexdigest()
if hashhex != headers.get('X-Pagure-Signature'):
raise Exception('Message received with an invalid signature')
Templates for ticket input
Pagure offers the possibility to add templates for ticket's input. These templates do not enforce
anything, users will have the possibility to simply ignore it, or even to not follow it, but it also
helps structuring the ticket opened against a project and highlighting the information that are often
requested/needed.
The templates are provided in the git repository containing the meta-data for the tickets. They must be
placed under a templates folder in this git repository, end with .md and as the extension suggests can be
formatted as markdown.
If you create a template templates/default.md, it will be shown by default when someone ask to create a
new ticket.
Example
For a project named test on pagure.io.
• First, clone the ticket git repo [1] and move into it
git clone ssh://git@pagure.io/tickets/test.git
cd test
• Create the templates folder
mkdir templates
• Create a default template
vim templates/default.md
And place in this file the following content:
##### Issue
##### Steps to reproduce
1.
2.
3.
##### Actual results
##### Expected results
• Commit and push the changes to the git repo
git add templates
git commit -m "Add a default template for tickets"
git push
• And this is how it will look like
[1] The URLs to the different git repositories can be found on the main page of the project, on the
right-side menu, under the section Source GIT URLs. Click on more to see them if you are logged in
and have access to the repository (the ticket and request git repositories require a commit access
or higher).
Customize the PR page
Pagure offers the possibility to customize the page that creates pull-request to add your specific
information, such as: please follow the XYZ coding style, run the tests or whatever you wish to inform
contributors when they open a new pull-request.
The customization is done via a file in the git repository containing the meta-data for the
pull-requests. This file must be placed under a templates folder, be named contributing.md and can be
formatted as you wish using markdown.
Example
For a project named test on pagure.io.
• First, clone the pull-request git repo [1] and move into it
git clone ssh://git@pagure.io/requests/test.git
cd test
• Create the templates folder
mkdir templates
• Create the customized PR info
vim templates/contributing.md
And place in this file the following content:
Contributing to test
====================
When creating a pull-request against test, there are couple of items to do
that will speed up the review process:
* Ensure the unit-tests are all passing (cf the ``runtests.py`` script at the
top level of the sources)
* Check if your changes are [pep8](https://www.python.org/dev/peps/pep-0008/)
compliant for this you can install ``python-pep8`` and run the ``pep8`` CLI
tool
• Commit and push the changes to the git repo
git add templates
git commit -m "Customize the PR page"
git push
• And this is how it will look like
[1] All the URLs to the different git repositories can be found on the main page of the project, on the
right-side menu, under the section Source GIT URLs, click on more to see them.
Theming Guide
Pagure is built on Flask, and uses Jinja2 for templates. Pagure also includes the ability to apply
different themes that control the look and feel of your pagure instance, or add or remove elements from
the interface.
Setting a theme
The theme is set in the Pagure configuration file. The theme name is defined by the name of the directory
in the /themes/ folder that contains the theme. For example to enable the theme that is used on
Pagure.io, add the following line to your Pagure configuration:
THEME = "pagureio"
Theme contents
A theme requires two directories (templates and static) in the directory that contains the theme. The
only other required file is theme.html which is placed in the templates directory
templates/
The templates directory is where pagure will look for the theme.html template. Additionally, if you wish
to override any template in Pagure, place it in the theme templates/ directory, and pagure will use that
template rather than the standard one.
WARNING:
Take care when overriding templates, as any changes to Pagure upstream will need to be backported to
your theme template override.
static/
The static directory contains all the static elements for the theme, including additional a favicon,
images, Javascript, and CSS files. To reference a file in the theme static directory use the jinja2 tag
{{ url_for('theme.static', filename='filename')}}. For example:
<link href="{{ url_for('theme.static', filename='theme.css') }}"
rel="stylesheet" type="text/css" />
templates/theme.html
The theme.html file defines a subset of items in the Pagure interface that are commonly changed when
creating a new theme. Theming is a new feature in Pagure, so this set is currently small, but please file
issues or PRs against pagure with ideas of new items to include.
The current items configurable in theme.html are:
masthead_class variable
A string of additional CSS class(es) to be added to the navbar element. This navbar element is the
topbar in Pagure. For example:
{% set masthead_class = "navbar-dark bg-dark" %}
masthead_navbar_items() macro
A Jinja macro that allows themes to inject custom items in the Pagure navigation bar. Example:
{% macro masthead_navbar_items() %}
<li class="nav-item ml-3">
<a class="nav-link font-weight-bold" href="...">
Foobar
</a>
</li>
{% endmacro %}
site_title variable
A string containing the text to append at the end of the html title on every page on the site. Usage:
{% set site_title = "Pagure" %}
projectstring(Bool:plural) macro
A macro that returns a string used to refer to Projects in Pagure The plural parameter informs if the
string to be returned is the plural form. This macro is optional. Usage:
{% macro projectstring(plural=False) -%}
{% if plural %}
Repositories
{% else %}
Repository
{% endif %}
{% endmacro -%}
projecticon variable
A string containing the name of the fontawesome icon to use for Projects. This variable is optional.
Usage:
{% set projecticon = "Package" %}
head_imports() macro
A Jinja macro that defines the additional items in the html head to be imported. The base templates do
not include the bootstrap CSS, so this needs to be included in this macro in your theme. Additionally,
include your favicon here, and a link to any additional CSS files your theme uses. Example:
{% macro head_imports() %}
<link rel="shortcut icon" type="image/vnd.microsoft.icon"
href="{{ url_for('theme.static', filename='favicon.ico')}}"/>
<link rel="stylesheet" href="{{ url_for('theme.static', filename='bootstrap/bootstrap.min.css')}}" />
<link href="{{ url_for('theme.static', filename='theme.css') }}" rel="stylesheet" type="text/css" />
{% endmacro %}
js_imports() macro
A Jinja macro that defines the additional javascript files to be imported. The base templates do not
include the bootstrap JS, so this needs to be included in this macro in your theme. Example:
{% macro js_imports() %}
<script src="{{ url_for('theme.static', filename='bootstrap/bootstrap.bundle.min.js')}}"></script>
{% endmacro %}
browseheader_message(select) macro
An optional Jinja macro that defines the welcome message that is shown above the tabs on the Browse Pages
(Projects, Users, and Groups). The select parameter is a string with the name of the page being shown
Example:
{% macro browseheader_message(select) %}
{% if select == 'projects' %}
<div class="row justify-content-around">
<div class="col-md-8">
<div class="jumbotron bg-transparent m-0 py-4 text-center">
<h1 class="display-5">Welcome to my Pagure</h1>
<p class="lead">Pagure is an Open Source software code hosting system.</p>
</div>
</div>
</div>
{% endif %}
{% endmacro %}
footer() macro
A Jinja macro that defines the footer of the Pagure site. Example:
{% macro footer() %}
<div class="footer py-3 bg-light border-top text-center">
<div class="container">
<p class="text-muted credit">
Powered by
<a href="https://pagure.io/pagure">Pagure</a>
{{ g.version }}
</p>
<p><a href="{{ url_for('ui_ns.ssh_hostkey') }}">SSH Hostkey/Fingerprint</a> | <a href="https://docs.pagure.org/pagure/usage/index.html">Documentation</a></p>
</div>
</div>
{% endmacro %}
about_page() macro
A Jinja macro that defines the content of the About page (available at /about). You may want to replace
the links to contact links for your own instance. Example:
{% macro about_page() %}
<div class="container mt-5">
<h1>About</h1>
<p>This is an instance of Pagure, a git forge.</p>
<p>If you experience a bug or security concern, please <a href="https://pagure.io/pagure/issues">submit an issue</a>.</p>
<p>You may also post questions to the Pagure Development list by emailing: <a href="mailto:pagure-devel@lists.pagure.io">pagure-devel@lists.pagure.io</a> or <a href="https://lists.pagure.io/admin/lists/pagure-devel.lists.pagure.io/">subscribe to the list</a>.</p>
<p><a href="https://lists.pagure.io/admin/lists/pagure-announce.lists.pagure.io/">Subscribe to announcements</a> about Pagure.</p>
</div>
{% endmacro %}
Upgrade a database
For changes to the database schema, we rely on Alembic. This allows us to do upgrade and downgrade of
schema migration, kind of like one would do commits in a system like git.
To upgrade the database to the latest version simply run:
alembic upgrade head
NOTE:
if pagure's configuration file isn't in /etc/pagure/pagure.cfg you will have to specify it to alembic
using the command:
PAGURE_CONFIG=/path/to/pagure.cfg alembic upgrade head
This allow applies for the command specified below.
This may fail for different reasons:
• The change was already made in the database
This can be because the version of the database schema saved is incorrect. It can be debugged using the
following commands:
• Find the current revision:
alembic current
• See the entire history:
alembic history
Once the revision at which your database should be is found (in the history) you can declare that your
database is at this given revision using:
alembic stamp <revision id>
Eventually, if you do not know where your database is or should be, you can do an iterative process
stamping the database for every revision, one by one trying every time to alembic upgrade until it works.
• The database used does not support some of the changes
SQLite is handy for development but does not support all the features of a real database server.
Upgrading a SQLite database might therefore not work, depending on the changes done.
In some cases, if you are using a SQLite database, you will have to destroy it and create a new one.
Pagure CI
Pagure CI is a service integrating the results of Continuous Integration (CI) services, such as jenkins
or travis-ci, into pull-requests opened against your project on pagure.
NOTE:
By default pagure-ci is off, an admin of your pagure instance will need to configure it to support one
or more CI services. Check the configuration section on how to do that.
Contents:
Jenkins with Pagure-ci
Jenkins is a Continuous Integration service that can be configured to be integrated with pagure.
This document describe the steps needed to make it work.
How does it work?
The principal is:
• pagure will trigger a build on jenkins when a pull-request is created, updated or when someone
explicitly asks pagure to do so or when a new commit is pushed (if pagure-ci is configured to trigger
on commit).
• pagure will send a few information to jenkins when triggering a build: REPO, BRANCH, BRANCH_TO, cause.
• jenkins will do its work and, using webhook, report to pagure that it has finished its task
• pagure will query jenkins to know the outcome of the task and flag the PR accordingly
REPO corresponds to the url of the repository the pull-request originates from (so most often it will be
a fork of the main repository).
BRANCH corresponds to the branch the pull-request originates from (the branch of the fork).
BRANCH_TO corresponds to the targeted branch in the main repository (the branch of the main project in
which the PR is to be merged).
cause is the reason the build was triggered (ie: the pull-request id or the commit hash).
How to enable Pagure CI
• Visit the settings page of your project
• Scroll down to the Hooks section and click on Pagure CI
• Select the type of CI service you want
• Enter the URL of the CI service. For example http://jenkins.fedoraproject.org
• Enter the name of the job the CI service will trigger. For example pagure-ci
• Tick the checkbox activating the hook. Either trigger on every commits, trigger only on pull-requests
or both every commits and pull-requests.
These steps will activate the hook, after reloading the page or the tab, you will be given access to two
important values: the token used to trigger the build on jenkins and the URL used by jenkins to report
the status of the build. Keep these two available when configuring jenkins for your project.
Configure Jenkins
These steps can only be made by the admins of your jenkins instance, but they only need to be made once.
• Download the following plugins:
• Git Plugin
• Notification Plugin
Configure your project on Jenkins
• Go to the Configure page of your project
• Under Job Notification click Add Endpoint
• Fields in Endpoint will be :
FORMAT: JSON
PROTOCOL: HTTP
EVENT: All Events
URL: <The URL provided in the Pagure CI hook on pagure>
TIMEOUT: 3000
LOG: 1
• Tick the checkbox This build is parameterized
• Add two String Parameters named REPO and BRANCH
• Source Code Management select Git and give the URL of the pagure project
• Under Build Trigger click on Trigger build remotely and specify the token given by pagure.
• Under Build -> Add build step -> Execute Shell
• In the box given enter the shell steps you want for testing your project.
Example Script
# Script specific for Pull-Request build
if [ -n "$REPO" -a -n "$BRANCH" ]; then
git remote rm proposed || true
git remote add proposed "$REPO"
git fetch proposed
git checkout origin/master
git config --global user.email "you@example.com"
git config --global user.name "Your Name"
git merge --no-ff "proposed/$BRANCH" -m "Merge PR"
fi
# Part of the script specific to how you run the tests on your project
Tips and tricks
• How to re-trigger a run of pagure-ci on a pull-request?
To manually trigger a run of pagure-ci on a given pull-request, simply add a comment saying: pretty
please pagure-ci rebuild.
NOTE:
To always have this handy, you can save it in the Quick Replies!
NOTE:
This trigger can also be configured per pagure instance via the configuration file.
Quick replies
Quick replies are reusable pieces of text that you can use to start a comment on an issue or pull
request. They are meant to remove the hassle of typing a similar response again and again.
Examples where this can be handy:
• asking for a rebase of a pull request
• asking a person to add a Signed-off-by line to their commit
All these requests might be accompanied by a description on why it's requested. With quick replies you
can prepare the descriptions and the just use them with a click of a button.
Using quick replies
Any user that can comment will be able to use the quick reply. They are offered in a drop down menu next
to the Preview button above comment form. [image]
The button is only visible if the project has some quick replies defined.
Additionally, the button will become insensitive when you type something into the comment box or switch
to preview. This should avoid writing over your carefully crafted comment by accident. If you remove the
text from the field, the button will work again.
Creating and modifying quick replies
Project admins can create them in the settings section. There are no length limits on the reply, but only
the first 50 characters will be displayed in the menu for users to choose from. This limitation should
encourage you to put the most important message at the beginning.
The order in which you define the replies will be preserved on the chooser menu. This can be used to put
the most frequently used ones on the top of the list.
Troubleshooting
This page lists some of the potential issues one may have in pagure as well as their solution(s).
Contents:
Inaccessible pull-requests
The symptoms
When trying to open a pull-request, if you run into this error:
The branch into which this pull-request was to be merged: XXX seems to
no longer be present in this repo
(Where XXX is a branch name).
(Here XXX is m2).
This means that the pull-request was opened against a branch on your repo and that this branch no longer
exists. Pagure is therefore unable to compute the diff between the sources and the target of the
pull-request.
The pull-request is thus inaccessible but remains in the list of open pull-requests.
The solution
The easiest solution to solve this problem is to re-create the target branch in your repo.
This can be done using git simply by doing:
git checkout -b <branch_name>
git push origin <branch_name>
It will create the branch named <branch_name> in pagure, allowing the diff to be computed for that
pull-request and thus allowing it to be displayed. It is then up to you to see if this pull-request is
still relevant and should be merged or closed.
Tips and tricks
This page contains some tips and tricks on how to use pagure. These do not fit in their own page but are
worth mentioning.
Place image onto your overview page
You can only use images that come from the Pagure host itself.
Example
Text in the square brackets will be used as an alt description.
Pre-fill issue using the URL
When creating issues for a project pagure supports pre-filling the title and description input text using
URL parameters.
Example:
https://pagure.io/pagure/new_issue/?title=<Issue>&content=<Issue Content>
The above URL will autofill the text boxes for Title and Description field with Title set to <Issue> and
Description set to <Issue Content>.
Pre-fill issue template using the URL
When creating issues for a project pagure supports pre-filling the title and description input text using
URL parameters.
Example:
https://pagure.io/pagure/new_issue/?template=<TemplateName>
The above URL will autofill the ticket with the specified template. The TemplateName should be the name
of the template file on disk (in the templates directory of the ticket git repository).
Filter for issues not having a certain tag
Very much in the same way pagure allows you to filter for issues having a certain tag, pagure allows one
to filter for issues not having a certain tag. To do this, simply prepend a ! in front of the tag.
Example:
https://pagure.io/pagure/issues?tags=!easyfix
Local user creation without email verification
If you set EMAIL_SEND to `False` from the configuration file, you will get the emails printed to the
console instead of being sent. The admin of the instance can then access the URL to manually validate the
account from there. This is generally used for development where we don't need to send any emails.
Filter an user's projects by their access
When watching a user's page, the list of all the project that user is involved in is presented regardless
of whether the user has ticket, commit, admin access or is the main admin of the project.
You can specify an acl= argument to the URL to filter the list of projects by access.
NOTE:
This also works for your home page when you are logged in.
Examples:
https://pagure.io/user/pingou?acl=main admin https://pagure.io/user/pingou?acl=admin
https://pagure.io/user/pingou?acl=commit
Filter issues by (custom) fields
Via the project's settings page, admins can set custom keys to be used in issues. You can search them
using the URL via the arguments ckeys and cvalue or simpler, using the search field at the top of the
issue page.
This also works for the following regular fields: tags, milestones, author, assignee, status, priority
(but tags and milestones despite their name only support a single value).
Examples:
https://pagure.io/SSSD/sssd/issues?status=Open&search_pattern=review%3ATrue
https://pagure.io/pagure/issues?status=Open&search_pattern=tags%3Aeasyfix
Search the comments of issues
One can search all the comments made on an issue tracker using content:<keyword> in the search field.
This is going to search all the comments (including the descriptions) of all the tickets and thus can be
quite slow on large project. This is why this feature isn't being pushed much forward.
Examples:
https://pagure.io/pagure/issues?status=Open&search_pattern=content%3Aeasyfix
Pagure API
The API documentation can be found at https://pagure.io/api/0/ or in /api/0/ of you local pagure
instance.
INSTALLING PAGURE
There are two ways to install pagure:
• via the RPM package (recommended if you are using a RPM-based GNU/Linux distribution)
• via the setup.py
Installing pagure via RPM
Here as well there are two ways of obtaining the RPM:
• From the main repositories
Pagure is packaged for Fedora since Fedora 21 and is available for RHEL and its derivative via the EPEL
repository <https://fedoraproject.org/wiki/EPEL>. So installing it is as easy as:
dnf install pagure pagure-milters pagure-ev pagure-webhook
or
yum install pagure pagure-milters pagure-ev pagure-webhook
The pagure package contains the core of the application and the doc server. (See the Overview page for a
global overview of the structure of the project).
The pagure-milters package contains, as the name says, the milter (a mail filter to hook into a MTA).
The pagure-ev package contains the eventsource server.
The pagure-webhook package contains the web-hook server.
NOTE:
The last three packages are optional, pagure would work fine without them but the live-update, the
webhook and the comment by email services will not work.
• From the sources
If you wish to run a newer version of pagure than what is in the repositories you can easily rebuild it
as RPM.
Simply follow these steps: # Clone the sources:
git clone https://pagure.io/pagure.git
# Go to the folder:
cd pagure
# Build a tarball of the latest version of pagure:
python setup.py sdist
# Build the RPM:
rpmbuild -ta dist/pagure*.tar.gz
This will build pagure from the version present in your clone.
Once, the RPM is installed the services pagure_milter and pagure_ev are ready to be used but the database
and the web-application parts still need to be configured.
Installing pagure via setup.py
Pagure includes in its sources a setup.py automating the installation of the web applications of pagure
(ie: the core + the doc server).
To install pagure via this mechanism simply follow these steps: # Clone the sources:
git clone https://pagure.io/pagure.git
# Go to the folder:
cd pagure
# Install the latest version of pagure:
python setup.py build
sudo python setup.py install
NOTE:
To install the eventsource server or the milter, refer to their respective documentations.
# Install the additional files as follow:
┌───────────────────────────────────────┬──────────────────────────────────────┐
│ Source | │ │
│ Destination │ │
├───────────────────────────────────────┼──────────────────────────────────────┤
│ files/pagure.cfg.sample | │ │
│ /etc/pagure/pagure.cfg │ │
├───────────────────────────────────────┼──────────────────────────────────────┤
│ files/alembic.ini │ /etc/pagure/alembic.ini │
├───────────────────────────────────────┼──────────────────────────────────────┤
│ files/pagure.conf │ /etc/httpd/conf.d/pagure.conf │
├───────────────────────────────────────┼──────────────────────────────────────┤
│ files/pagure.wsgi │ /usr/share/pagure/pagure.wsgi │
├───────────────────────────────────────┼──────────────────────────────────────┤
│ createdb.py │ /usr/share/pagure/pagure_createdb.py │
└───────────────────────────────────────┴──────────────────────────────────────┘
Set-up pagure
Once pagure's files are installed, you still need to set up some things.
• Create the folder release
This folder is used by project maintainers to upload the tarball of the releases of their project.
This folder must be accessible by the user under which the application is running (in our case: git).
mkdir -p /var/www/releases
chown git:git /var/www/releases
• Create the folders where the repos, forks and checkouts will be stored
Pagure stores the sources of a project in a git repo, offers a place to store the project's documentation
in another repo, stores a JSON dump of all issues and of all pull-requests in another two repos, and
keeps a local checkout of remote projects when asked to do remote pull-requests. All these repositories
are stored in different folders that must be created manually.
For example you can place them under /srv/git/repositories/ which would make /srv/git the home of your
gitolite user.
You would then create the folders with:
mkdir /srv/git/repositories/{docs,forks,tickets,requests,remotes}
• Configure apache
If installed by RPM, you will find an example apache configuration file at:
/etc/httpd/conf.d/pagure.conf.
If not installed by RPM, the example file is present in the sources at: files/pagure.conf.
Adjust it for your needs.
• Configure the WSGI file
If you installed by RPM, you will find example WSGI files at: /usr/share/pagure/pagure.wsgi for the core
server and /usr/share/pagure/doc_pagure.wsgi for the doc server.
If you did not install by RPM, these files are present in the sources at: files/pagure.wsgi and
files/doc_pagure.wsgi.
Adjust them for your needs
• Give apache permission to read the repositories owned by the git user.
For the sake of this document, we assume that the web application runs under the git user, the same user
as your gitolite user, but apache itself runs under the httpd (or apache2) user. So by default, apache
will not be allowed to read git repositories created and managed by gitolite.
To give apache this permission (required to make git clone via http work), we use file access control
lists (aka FACL):
setfacl -m user:apache:rx --default
setfacl -Rdm user:apache:rx /srv/git
setfacl -Rm user:apache:rx /srv/git
Where /srv/git is the home of your gitolite user (which will thus need to be adjusted for your
configuration).
• Set up the configuration file of pagure
This is an important step which concerns the file /etc/pagure/pagure.cfg. If you have installed pagure
by RPM, this file is already there, otherwise you can find an example one in the sources at:
files/pagure.cfg.sample that you will have to copy to the right location.
Confer the Configuration section of this documentation for a full explanation of all the options of
pagure.
• Create the database
You first need to create the database itself. For this, since pagure can work with: PostgreSQL, MySQL or
MariaDB, we would like to invite you to consult the documentation of your database system for this
operation.
Once you have specified in the configuration file the to url used to connect to the database, and create
the database itself, you can now create the tables, the database scheme.
For changes to existing tables, we rely on Alembic. It uses revisions to perform the upgrades, but to
know which upgrades are needed and which are already done, the current revision needs to be saved in the
database. This will allow alembic to know and apply the new revision when running it.
In the alembic.ini file, one of the configuration key is most important: script_location which is the
path to the versions folder containing all the alembic migration files. The sqlalchemy.url configuration
key if missing will be replaced by the url filled in the configuration file of pagure.
To create the database tables, you need to run the script /usr/share/pagure/pagure_createdb.py and
specify the configuration to use for pagure and for alembic.
For example:
python /usr/share/pagure/pagure_createdb.py -c /etc/pagure/pagure.cfg -i /etc/pagure/alembic.ini
This will tell /usr/share/pagure/pagure_createdb.py to use the database information specified in the file
/etc/pagure/pagure.cfg and to stamp the database at the last alembic revision.
WARNING:
Pagure's default configuration is using sqlite. This is fine for development purpose but not for
production use as sqlite does not support all the operations needed when updating the database schema.
Do use PostgreSQL, MySQL or MariaDB in production.
For changes to existing tables, we rely on Alembic. It uses revisions to perform the upgrades, but to
know which upgrades are needed and which are already done, the current revision needs to be saved in the
database. This will allow alembic to know apply the new revision when running it.
In the alembic.ini file, one of the configuration key is most important: script_location which is the
path to the versions folder containing all the alembic migration files. The sqlalchemy.url configuration
key if missing will be replaced by the url filled in the configuration file of pagure.
WARNING:
Calling pagure_createdb.py is asked regularly in the UPGRADING.rst documentation, especially to handle
database schema changes upon upgrades, but the --initial argument should only be used the first time
as it will otherwise break upgrading the database schema via alembic.
NOTE:
When install from source the script is called createdb.py and not pagure_createdb.py.
If you installed by RPM, then enable and start the worker services
systemctl enable --now pagure_worker.service pagure_gitolite_worker.service
Set up virus scanning
Pagure can automatically scan uploaded attachments for viruses using Clam. To set this up, first install
clamav-data-empty, clamav-server, clamav-server-systemd and clamav-update.
Then edit /etc/freshclam.conf, removing the Example line and run freshclam once to get an up to date
database.
Copy /usr/share/doc/clamav-server/clamd.conf to /etc/clamd.conf and edit that too, again making sure to
remove the Example line. Make sure to set LocalSocket to a file in a directory that exists, and set User
to an existing system user.
Then start the clamd service and set VIRUS_SCAN_ATTACHMENTS = True in the Pagure configuration.
INSTALLING PAGURE'S MILTER
A milter is a script that is ran by a Mail Transfer Agent (MTA) upon receiving an email via either a
network or an unix socket.
If you want more information feel free to check out the corresponding page on wikipedia:
https://en.wikipedia.org/wiki/Milter.
Configure your system
• Install the required dependencies
python-pymilter
NOTE:
We ship a systemd unit file for pagure_milter but we welcome patches for scripts for other init
systems.
NOTE:
It also requires a MTA, we used postfix.
• Create an alias reply
This can be done in /etc/aliases, for example:
reply: /dev/null
• Activate the ability of your MTA, to split users based on the character +. This way all the emails
sent to reply+...@example.com will be forwarded to your alias for reply.
In postfix this is done via:
recipient_delimiter = +
• Hook the milter in the MTA
In postfix this is done via:
non_smtpd_milters = unix:/var/run/pagure/paguresock
smtpd_milters = unix:/var/run/pagure/paguresock
• Install the files of the milter as follow:
┌────────────────────────────────────────┬───────────────────────────────────────────┐
│ Source │ Destination │
├────────────────────────────────────────┼───────────────────────────────────────────┤
│ pagure-milters/comment_email_milter.py │ /usr/share/pagure/comment_email_milter.py │
├────────────────────────────────────────┼───────────────────────────────────────────┤
│ pagure-milters/milter_tempfile.conf │ /usr/lib/tmpfiles.d/pagure-milter.conf │
├────────────────────────────────────────┼───────────────────────────────────────────┤
│ pagure-milters/pagure_milter.service │ /etc/systemd/system/pagure_milter.service │
└────────────────────────────────────────┴───────────────────────────────────────────┘
The first file is the script of the milter itself.
The second file is a file specific for systemd and ensuring the temporary folders needed by the milter
are re-created if needed at each boot.
The third file is the systemd service file.
• Activate the service and ensure it's started upon boot:
systemctl enable pagure_milter
systemctl start pagure_milter
INSTALLING PAGURE'S EVENTSOURCE SERVER
Eventsource or Server Sent Events are messages sent from a server to a web browser. It allows one to
refresh a page "live", ie, without the need to reload it entirely.
Configure your system
The eventsource server is easy to set-up.
• Install the required dependencies
python-redis
python-trololio
NOTE:
We ship a systemd unit file for pagure_milter but we welcome patches for scripts for other init
systems.
• Install the files of the SSE server as follow:
┌───────────────────────────────────┬────────────────────────────────────────────────┐
│ Source │ Destination │
├───────────────────────────────────┼────────────────────────────────────────────────┤
│ pagure-ev/pagure_stream_server.py │ /usr/libexec/pagure-ev/pagure_stream_server.py │
├───────────────────────────────────┼────────────────────────────────────────────────┤
│ pagure-ev/pagure_ev.service │ /etc/systemd/system/pagure_ev.service │
└───────────────────────────────────┴────────────────────────────────────────────────┘
The first file is the script of the SSE server itself.
The second file is the systemd service file.
• Finally, activate the service and ensure it's started upon boot:
systemctl enable redis
systemctl start redis
systemctl enable pagure_ev
systemctl start pagure_ev
INSTALLING PAGURE'S WEB-HOOKS NOTIFICATION SYSTEM
Web-hooks are a notification system upon which a system makes a http POST request with some data upon
doing an action. This allows notifying a system that an action has occurred.
If you want more information feel free to check out the corresponding page on wikipedia:
https://en.wikipedia.org/wiki/Webhook.
Configure your system
• Install the required dependencies
python-redis
python-trololio
NOTE:
We ship a systemd unit file for pagure_webhook but we welcome patches for scripts for other init
systems.
• Install the files of the web-hook server as follow:
┌─────────────────────────────────────────┬──────────────────────────────────────────────────────┐
│ Source │ Destination │
├─────────────────────────────────────────┼──────────────────────────────────────────────────────┤
│ pagure-webhook/pagure-webhook-server.py │ /usr/libexec/pagure-webhook/pagure-webhook-server.py │
├─────────────────────────────────────────┼──────────────────────────────────────────────────────┤
│ pagure-webhook/pagure_webhook.service │ /etc/systemd/system/pagure_webhook.service │
└─────────────────────────────────────────┴──────────────────────────────────────────────────────┘
The first file is the script of the web-hook server itself.
The second file is the systemd service file.
• Activate the service and ensure it's started upon boot:
systemctl enable redis
systemctl start redis
systemctl enable pagure_webhook
systemctl start pagure_webhook
INSTALLING PAGURE-CI
A CI stands for Continuous Integration. Pagure can be configured to integrate results coming from CI
services, such as Jenkins on pull-request opened against the project.
Configure your system
• Install the required dependencies
python-jenkins
python-redis
python-trololio
NOTE:
We ship a systemd unit file for pagure_ci but we welcome patches for scripts for other init systems.
• Install the files of pagure-ci as follow:
┌───────────────────────────────┬────────────────────────────────────────────┐
│ Source │ Destination │
├───────────────────────────────┼────────────────────────────────────────────┤
│ pagure-ci/pagure_ci_server.py │ /usr/libexec/pagure-ci/pagure_ci_server.py │
├───────────────────────────────┼────────────────────────────────────────────┤
│ pagure-ci/pagure_ci.service │ /etc/systemd/system/pagure_ci.service │
└───────────────────────────────┴────────────────────────────────────────────┘
The first file is the pagure-ci service itself, triggering the build on the CI service when there is a
new pull-request or a change to an existing one.
The second file is the systemd service file.
• Configure your pagure instance to support CI, add the following to your configuration file
PAGURE_CI_SERVICES = ['jenkins']
• Activate the service and ensure it's started upon boot:
systemctl enable redis
systemctl start redis
systemctl enable pagure_ci
systemctl start pagure_ci
INSTALLING PAGURE-LOADJSON
pagure-loadjson is the service that updates the database based on the content of the JSON blob pushed
into the ticket git repository (and in the future for pull-requests as well).
Configure your system
• Install the required dependencies
python-redis
python-trololio
NOTE:
We ship a systemd unit file for pagure_loadjson but we welcome patches for scripts for other init
systems.
• Install the files of pagure-loadjon as follow:
┌───────────────────────────────────────────┬─────────────────────────────────────────────────┐
│ Source │ Destination │
├───────────────────────────────────────────┼─────────────────────────────────────────────────┤
│ pagure-loadjson/pagure_loadjson_server.py │ /usr/libexec/pagure-loadjson/pagure_loadjson.py │
├───────────────────────────────────────────┼─────────────────────────────────────────────────┤
│ pagure-loadjson/pagure_loadjson.service │ /etc/systemd/system/pagure_loadjson.service │
└───────────────────────────────────────────┴─────────────────────────────────────────────────┘
The first file is the pagure-loadjson service itself, triggered by the git hook (shipped with pagure
itself) and loading the JSON files into the database.
The second file is the systemd service file.
• Activate the service and ensure it's started upon boot:
systemctl enable redis
systemctl start redis
systemctl enable pagure_loadjson
systemctl start pagure_loadjson
INSTALLING PAGURE-LOGCOM
pagure-logcom is the service that updates the log table in the database for every commit made to the main
branch of a repository allowing to build the calendar heatmap presented on every user's page.
Configure your system
• Install the required dependencies
python-redis
python-trololio
NOTE:
We ship a systemd unit file for pagure_logcom but we welcome patches for scripts for other init
systems.
• Install the files of pagure-loadjon as follow:
┌────────────────────────────────────────────────────┬─────────────┐
│ Source │ Destination │
├────────────────────────────────────────────────────┼─────────────┤
│ pagure-logcom/pagure_logcom_server.py │ │
│ | │ │
│ /usr/libexec/pagure-logcom/pagure_logcom_server.py │ │
├────────────────────────────────────────────────────┼─────────────┤
│ pagure-logcom/pagure_logcom.service | │ │
│ /etc/systemd/system/pagure_logcom.service │ │
└────────────────────────────────────────────────────┴─────────────┘
The first file is the pagure-logcom service itself, triggered by the git hook (shipped with pagure
itself) and logging the commits into the database.
The second file is the systemd service file.
• Activate the service and ensure it's started upon boot:
systemctl enable redis
systemctl start redis
systemctl enable pagure_logcom
systemctl start pagure_logcom
CRON JOBS
Some actions in pagure are meant to the run via a cron job.
API key expiration reminder
One of the cron job sending reminder about API keys that are about to expire. It will send an email 10
days, then 5 days and finally the day before the key expires to the person who has created.
The cron job can be found in the sources in:
files/api_key_expire_mail.py
In the RPM it is installed in:
/usr/share/pagure/api_key_expire_mail.py
This cron job is meant to be run daily using a syntax similar to:
10 0 * * * root python /usr/share/pagure/api_key_expire_mail.py
which will make the script run at 00:10 every day.
CONFIGURATION
Pagure offers a wide varieties of options that must or can be used to adjust its behavior.
All of these options can be edited or added to your configuration file. If you have installed pagure,
this configuration file is likely located in /etc/pagure/pagure.cfg. Otherwise, it will depend on your
setup/deployment.
Must options
Here are the options you must set up in order to get pagure running.
SECRET_KEY
This configuration key is used by flask to create the session. It should be kept secret and set as a long
and random string.
SALT_EMAIL
This configuration key is used to ensure that when sending notifications to different users, each one of
them has a different, unique and unfakeable Reply-To header. This header is then used by the milter to
find out if the response received is a real one or a fake/invalid one.
DB_URL
This configuration key indicates to the framework how and where to connect to the database server. Pagure
uses SQLAchemy to connect to a wide range of database server including MySQL, PostgreSQL, and SQLite.
Examples values:
DB_URL = 'mysql://user:pass@host/db_name'
DB_URL = 'postgres://user:pass@host/db_name'
DB_URL = 'sqlite:////var/tmp/pagure_dev.sqlite'
Defaults to sqlite:////var/tmp/pagure_dev.sqlite
APP_URL
This configuration key indicates the URL at which this pagure instance will be made available.
Defaults to: http://localhost.localdomain/
EMAIL_ERROR
Pagure sends email when it catches an unexpected error (which saves you from having to monitor the logs
regularly; but if you like, the error is still present in the logs). This configuration key allows you
to specify to which email address to send these error reports.
GIT_URL_SSH
This configuration key provides the information to the user on how to clone the git repos hosted on
pagure via SSH.
The URL should end with a slash /.
Defaults to: 'ssh://git@llocalhost.localdomain/'
NOTE:
If you are using a custom setup for your deployment where every user has an account on the machine you
may want to tweak this URL to include the username. If that is the case, you can use {username} in the
URL and it will be expanded to the username of the user viewing the page when rendered. For example:
'ssh://{username}@pagure.org/'
GIT_URL_GIT
This configuration key provides the information to the user on how to clone the git repos hosted on
pagure anonymously. This access can be granted via the git:// or http(s):// protocols.
The URL should end with a slash /.
Defaults to: 'git://localhost.localdomain/'
BROKER_URL
This configuration key is used to point celery to the broker to use. This is the broker that is used to
communicate between the web application and its workers.
Defaults to: 'redis://%s' % APP.config['REDIS_HOST']
NOTE:
See the Redis options for the REDIS_HOST configuration key
Repo Directories
Each project in pagure has 2 to 4 git repositories, depending on configuration of the Pagure instance
(see below):
• the main repo for the code
• the doc repo showed in the doc server (optional)
• the ticket repo storing the metadata of the tickets (optional)
• the request repo storing the metadata of the pull-requests
There are then another 3 folders: one for specifying the locations of the forks, one for the remote git
repo used for the remotes pull-requests (ie: those coming from a project not hosted on this instance of
pagure), and one for user-uploaded tarballs.
GIT_FOLDER
This configuration key points to the folder where the git repos are stored. For every project, two to
four repos are created:
• a repo with source code of the project
• a repo with documentation of the project (if ENABLE_DOCS is True)
• a repo with metadata of tickets opened against the project (if ENABLE_TICKETS is True)
• a repo with metadata of pull requests opened against the project
Note that gitolite config value GL_REPO_BASE (if using gitolite 3) or $REPO_BASE (if using gitolite 2)
must have exactly the same value as GIT_FOLDER.
REMOTE_GIT_FOLDER
This configuration key points to the folder where the remote git repos (ie: not hosted on pagure) that
someone used to open a pull-request against a project hosted on pagure are stored.
UPLOAD_FOLDER_PATH
This configuration key points to the folder where user-uploaded tarballs are stored and served from.
ATTACHMENTS_FOLDER
This configuration key points to the folder where attachments can be cached for easier access by the
web-server (allowing to not interact with the git repo having it to serve it).
UPLOAD_FOLDER_URL
Full URL to where the uploads are available. It is highly recommended for security reasons that this URL
lives on a different domain than the main application (an entirely different domain, not just a
sub-domain).
Defaults to: /releases/, unsafe for production!
WARNING:
both UPLOAD_FOLDER_PATH and UPLOAD_FOLDER_URL must be specified for the upload release feature to work
SESSION_COOKIE_SECURE
When this is set to True, the session cookie will only be returned to the server via ssl (https). If you
connect to the server via plain http, the cookie will not be sent. This prevents sniffing of the cookie
contents. This may be set to False when testing your application but should always be set to True in
production.
Defaults to: False for development, must be True in production with https.
SESSION_TYPE
Enables the flask-session extension if set to a value other than None. The flask-session package needs to
be installed and proper configuration needs to be included in the Pagure config file.
This is useful when the Pagure server needs to be scaled up to multiple instances, which requires the
flask session keys to be shared between those. Flask-session allows you to use Redis, Memcached,
relational database or MongoDB for storing shared session keys.
FROM_EMAIL
This configuration key specifies the email address used by this pagure instance when sending emails
(notifications).
Defaults to: pagure@localhost.localdomain
DOMAIN_EMAIL_NOTIFICATIONS
This configuration key specifies the domain used by this pagure instance when sending emails
(notifications). More precisely, it is used when building the msg-id header of the emails sent.
Defaults to: localhost.localdomain
VIRUS_SCAN_ATTACHMENTS
This configuration key configures whether attachments are scanned for viruses on upload. For more
information, see the install.rst guide.
Defaults to: False
GIT_AUTH_BACKEND
This configuration key allows specifying which git auth backend to use.
Git auth backends can either be static (like gitolite), where a file is generated when something changed
and then used on login, or dynamic, where the actual ACLs are checked in a git hook before being applied.
By default pagure provides the following backends:
• test_auth: simple debugging backend printing and returning the string Called
GitAuthTestHelper.generate_acls()
• gitolite2: allows deploying pagure on the top of gitolite 2
• gitolite3: allows deploying pagure on the top of gitolite 3
• pagure: Pagure git auth implementation (using keyhelper.py and aclchecker.py) that is used via sshd
AuthorizedKeysCommand
• pagure_authorized_keys: Pagure git auth implementation that writes to authorized_keys file
Defaults to: gitolite3
NOTE:
The option GITOLITE_BACKEND is the legacy name, and for backwards compatibility reasons will override
this setting
NOTE:
These options can be expended, cf Customize the gitolite configuration.
Configure Pagure Auth
Pagure offers a simple, but extensible internal authentication mechanism for Git repositories. It relies
on SSH for authentication. In other words, SSH lets you in and Pagure checks if you are allowed to do
what you are trying to do once you are inside.
This authentication mechanism uses keyhelper.py and aclchecker.py to check the Pagure database for user
registered SSH keys to do the authentication.
The integrated authentication mechanism has two modes of operation: one where it is configured as the
AuthorizedKeysCommand for the SSH user (preferred) and one where it is configured to manage the
authorized_keys file for the SSH user.
In the preferred mode, when you attempt to do an action with a remote Git repo over SSH (e.g. git clone
ssh://git@localhost.localdomain/repository.git), the SSH server will ask Pagure to validate the SSH user
key. This has the advantage of performance (no racey and slow file I/O) but has the disadvantage of
requiring changes to the system's sshd_config file to use it.
To use this variant, set the following in pagure.cfg:
GIT_AUTH_BACKEND = "pagure"
HTTP_REPO_ACCESS_GITOLITE = None
SSH_KEYS_USERNAME_EXPECT = "git"
SSH_COMMAND_NON_REPOSPANNER = ([
"/usr/bin/%(cmd)s",
"/srv/git/repositories/%(reponame)s",
], {"GL_USER": "%(username)s"})
Setting the following in /etc/ssh/sshd_config is also required:
Match User git
AuthorizedKeysCommand /usr/libexec/pagure/keyhelper.py "%u" "%h" "%t" "%f"
AuthorizedKeysCommandUser git
If you do not have the ability to modify the sshd configuration to set up the pagure backend, then you
need to use the pagure_authorized_keys alternative backend. This backend will write to the git user's
authorized_keys file instead. This is slower than the preferred mode and also has the disadvantage of
making it impossible to scale to multiple Pagure frontend instances on top of a shared Git storage
without causing races and triggering inconsistencies. It also adds to the I/O contention on a heavily
used system, but for most smaller setups with few users, the trade-off is not noticeable.
To use this variant, enable the pagure_authorized_keys_worker service and set the following to
pagure.cfg:
SSH_FOLDER = "/srv/git/.ssh"
GIT_AUTH_BACKEND = "pagure_authorized_keys"
HTTP_REPO_ACCESS_GITOLITE = None
SSH_COMMAND_NON_REPOSPANNER = ([
"/usr/bin/%(cmd)s",
"/srv/git/repositories/%(reponame)s",
], {"GL_USER": "%(username)s"})
Configure Gitolite
Pagure can use gitolite as an authorization layer. Gitolite relies on SSH for the authentication. In
other words, SSH lets you in and gitolite checks if you are allowed to do what you are trying to do once
you are inside.
Pagure supports both gitolite 2 and gitolite 3 and the code generating the gitolite configuration can be
customized for easier integration with other systems (cf Customize the gitolite configuration).
Using Gitolite also requires setting the following in pagure.cfg:
HTTP_REPO_ACCESS_GITOLITE = "/usr/share/gitolite3/gitolite-shell"
SSH_COMMAND_NON_REPOSPANNER = (
[
"/usr/share/gitolite3/gitolite-shell",
"%(username)s",
"%(cmd)s",
"%(reponame)s",
],
{},
)
This ensures that the Gitolite environment is used for interacting with Git repositories. Further
customizations are listed below.
gitolite 2 and 3
GITOLITE_HOME
This configuration key points to the home directory of the user under which gitolite is ran.
GITOLITE_KEYDIR
This configuration key points to the folder where gitolite stores and accesses the public SSH keys of all
the user have access to the server.
Since pagure is the user interface, it is pagure that writes down the files in this directory,
effectively setting up the users to be able to use gitolite.
GITOLITE_CONFIG
This configuration key points to the gitolite.conf file where pagure writes the gitolite repository
access configuration.
GITOLITE_CELERY_QUEUE
This configuration is useful for large pagure deployment where recompiling the gitolite config file can
take a long time. By default the compilation of gitolite's configuration file is done by the
pagure_worker, which spawns by default 4 concurrent workers. If it takes a while to recompile the
gitolite configuration file, these workers may be stepping on each others' toes. In this situation, this
configuration key allows you to direct the messages asking for the gitolite configuration file to be
compiled to a different queue which can then be handled by a different service/worker.
Pagure provides a pagure_gitolite_worker.service systemd service file pre-configured to handles these
messages if this configuration key is set to gitolite_queue.
gitolite 2 only
GL_RC
This configuration key points to the file gitolite.rc used by gitolite to record who has access to what
(ie: who has access to which repo/branch).
GL_BINDIR
This configuration key indicates the folder in which the gitolite tools can be found. It can be as simple
as /usr/bin/ if the tools have been installed using a package manager or something like /opt/bin/ for a
more custom install.
gitolite 3 only
GITOLITE_HAS_COMPILE_1
By setting this configuration key to True, you can turn on using the gitolite compile-1 binary. This
speeds up gitolite task when it recompiles configuration after new project is created. In order to use
this, you need to have the compile-1 gitolite command.
There are two ways to have it,
1. You distribution already has the file installed for you and you can then just use it.
2. You need to download and install it yourself. We are describing what needs to be done for this here
below.
Installing the compile-1 command:
• You also have to make sure that your distribution of gitolite contains patch which makes gitolite
respect ALLOW_ORPHAN_GL_CONF configuration variable, if this patch isn't already present, you will have
to make the change yourself.
• In your gitolite.rc set ALLOW_ORPHAN_GL_CONF to 1 (you may have to add it yourself).
• Still in your gitolite.rc file, uncomment LOCAL_CODE file and set it to a full path of a directory that
you choose (for example /usr/local/share/gitolite3).
• Create a subdirectory commands under the path you picked for LOCAL_CODE (in our example, you will need
to do: mkdir -p /usr/local/share/gitolite3/commands)
• Finally, install the compile-1 command in this commands subdirectory If your installation doesn't ship
this file, you can download it. (Ensure the file is executable, otherwise gitolite will not find it)
Defaults to: False
EventSource options
EVENTSOURCE_SOURCE
This configuration key indicates the URL at which the EventSource server is available. If not defined,
pagure will behave as if there are no EventSource server running.
EVENTSOURCE_PORT
This configuration key indicates the port at which the EventSource server is running.
NOTE:
The EventSource server requires a redis server (see Redis options below)
Web-hooks notifications
WEBHOOK
This configuration key allows turning on or off web-hooks notifications for this pagure instance.
Defaults to: False.
NOTE:
The Web-hooks server requires a redis server (see Redis options below)
Redis options
REDIS_HOST
This configuration key indicates the host at which the redis server is running.
Defaults to: 0.0.0.0.
REDIS_PORT
This configuration key indicates the port at which the redis server can be contacted.
Defaults to: 6379.
REDIS_DB
This configuration key indicates the name of the redis database to use for communicating with the
EventSource server.
Defaults to: 0.
Authentication options
ADMIN_GROUP
List of groups, either local or remote (if the openid server used supports the group extension), that are
the site admins. These admins can regenerate the gitolite configuration, the ssh key files, and the
hook-token for every project as well as manage users and groups.
PAGURE_ADMIN_USERS
List of local users that are the site admins. These admins have the same rights as the users in the admin
groups listed above as well as admin rights to all projects hosted on this pagure instance.
Celery Queue options
In order to help prioritize between tasks having a direct impact on the user experience and tasks needed
to be run on the background but not directly impacting the users, we have split the generic tasks
triggered by the web application into three possible queues: Fast, Medium, Slow. If none of these
options are set, a single queue will be used for all tasks.
FAST_CELERY_QUEUE
This configuration key can be used to specify a dedicated queue for tasks that are triggered by the web
frontend and need to be processed quickly for the best user experience.
This will be used for tasks such as creating a new project, forking or merging a pull-request.
Defaults to: None.
MEDIUM_CELERY_QUEUE
This configuration key can be used to specify a dedicated queue for tasks that are triggered by the web
frontend and need to be processed but aren't critical for the best user experience.
This will be used for tasks such as updating a file in a git repository.
Defaults to: None.
SLOW_CELERY_QUEUE
This configuration key can be used to specify a dedicated queue for tasks that are triggered by the web
frontend, are slow and do not impact the user experience in the user interface.
This will be used for tasks such as updating the ticket git repo based on the content posted in the user
interface.
Defaults to: None.
Stomp Options
Pagure integration with Stomp allows you to emit messages to any stomp-compliant message bus.
STOMP_NOTIFICATIONS
This configuration key can be used to turn on or off notifications via stomp protocol. All other
stomp-related settings don't need to be present if this is set to False.
Defaults to: False.
STOMP_BROKERS
List of 2-tuples with broker domain names and ports. For example [('primary.msg.bus.com', 6543),
('backup.msg.bus.com`, 6543)].
STOMP_HIERARCHY
Base name of the hierarchy to emit messages to. For example /queue/some.hierarchy.. Note that this must
end with a dot. Pagure will append queue names such as project.new to this value, resulting in queue
names being e.g. /queue/some.hierarchy.project.new.
STOMP_SSL
Whether or not to use SSL when connecting to message brokers.
Defaults to: False.
STOMP_KEY_FILE
Absolute path to key file for SSL connection. Only required if STOMP_SSL is set to True.
STOMP_CERT_FILE
Absolute path to certificate file for SSL connection. Only required if STOMP_SSL is set to True.
STOMP_CREDS_PASSWORD
Password for decoding STOMP_CERT_FILE and STOMP_KEY_FILE. Only required if STOMP_SSL is set to True and
credentials files are password-encoded.
ALWAYS_STOMP_ON_COMMITS
This configuration key can be used to enforce stomp notifications on commits made on all projects in a
pagure instance.
Defaults to: False.
API token ACLs
ACLS
This configuration key lists all the ACLs that can be associated with an API token with a short
description of what the ACL allows one to do. This key it not really meant to be changed unless you
really know what you are doing.
USER_ACLS
This configuration key can be used to list which of the ACLs listed in ACLS can be associated with an API
token of a project in the (web) user interface.
Use this configuration key in combination with ADMIN_API_ACLS to disable certain ACLs for users while
allowing admins to generate keys with them.
Defaults to: [key for key in ACLS.keys() if key != 'generate_acls_project']
(ie: all the ACLs in ACLS except for generate_acls_project)
ADMIN_API_ACLS
This configuration key can be used to list which of the ACLs listed in ACLS can be generated by the
pagure-admin CLI tool by admins.
Defaults to: ['issue_comment', 'issue_create', 'issue_change_status', 'pull_request_flag',
'pull_request_comment', 'pull_request_merge', 'generate_acls_project', 'commit_flag', 'create_branch']
CROSS_PROJECT_ACLS
This configuration key can be used to list which of the ACLs listed in ACLS can be associated with a
project-less API token in the (web) user interface. These project-less API tokens can be generated in
the user's settings page and allows action in multiple projects instead of being restricted to a specific
one.
Defaults to: ['create_project', 'fork_project', 'modify_project']
Optional options
Theming
THEME
This configuration key allows you to specify the theme to be used. The string specified is the name of
the theme directory in pagure/themes/
For more information about theming see the Theming Guide
Default options:
• chameleon The OpenSUSE theme for pagure
• default The default theme for pagure
• pagureio The theme used at https://pagure.io
• srcfpo The theme used at https://src.fedoraproject.org
Defaults to: default
Git repository templates
PROJECT_TEMPLATE_PATH
This configuration key allows you to specify the path to a git repository to use as a template when
creating new repository for new projects. This template will not be used for forks nor any of the git
repository but the one used for the sources (ie: it will not be used for the tickets, requests or docs
repositories).
FORK_TEMPLATE_PATH
This configuration key allows you to specify the path to a git repository to use as a template when
creating new repository for new forks. This template will not be used for any of the git repository but
the one used for the sources of forks (ie: it will not be used for the tickets, requests or docs
repositories).
SSH_KEYS
It is a good practice to publish the fingerprint and public SSH key of a server you provide access to.
Pagure offers the possibility to expose this information based on the values set in the configuration
file, in the SSH_KEYS configuration key.
See the SSH hostkeys/Fingerprints page on pagure.io.
Where <foo> and <bar> must be replaced by your values.
CSP_HEADERS
Content Security Policy (CSP) is a computer security standard introduced to prevent cross-site scripting
(XSS), clickjacking and other code injection attacks resulting from execution of malicious content in the
trusted web page context
Source: https://en.wikipedia.org/wiki/Content_Security_Policy
Defaults to:
CSP_HEADERS = (
"default-src 'self' https:; "
"script-src 'self' 'nonce-{nonce}'; "
"style-src 'self' 'nonce-{nonce}'"
)
Where {nonce} is dynamically set by pagure.
LOGGING_GIT_HOOKS
This configuration key allows to have a different logging configuration for the web application and the
git hooks.
If un-specified (default), the logging configuration used by the git hooks will be the same as the one
for the web application (i.e.: defined in LOGGING here below).
Defaults to: None.
LOGGING
This configuration key allows you to set up the logging of the application. It relies on the standard
python logging module.
The default value is:
LOGGING = {
"version": 1,
"disable_existing_loggers": False,
"formatters": {
"standard": {
"format": "%(asctime)s [%(levelname)s] %(name)s: %(message)s"
},
"email_format": {"format": MSG_FORMAT},
},
"filters": {"myfilter": {"()": ContextInjector}},
"handlers": {
"console": {
"formatter": "standard",
"class": "logging.StreamHandler",
"stream": "ext://sys.stdout",
},
"auth_handler": {
"formatter": "standard",
"class": "logging.StreamHandler",
"stream": "ext://sys.stdout",
},
"email": {
"level": "ERROR",
"formatter": "email_format",
"class": "logging.handlers.SMTPHandler",
"mailhost": "localhost",
"fromaddr": "pagure@localhost",
"toaddrs": "root@localhost",
"subject": "ERROR on pagure",
"filters": ["myfilter"],
},
},
# The root logger configuration; this is a catch-all configuration
# that applies to all log messages not handled by a different logger
"root": {"level": "INFO", "handlers": ["console"]},
"loggers": {
"pagure": {
"handlers": ["console"],
"level": "DEBUG",
"propagate": True,
},
"pagure_auth": {
"handlers": ["auth_handler"],
"level": "DEBUG",
"propagate": False,
},
"flask": {
"handlers": ["console"],
"level": "INFO",
"propagate": False,
},
"sqlalchemy": {
"handlers": ["console"],
"level": "WARN",
"propagate": False,
},
"binaryornot": {
"handlers": ["console"],
"level": "WARN",
"propagate": True,
},
"MARKDOWN": {
"handlers": ["console"],
"level": "WARN",
"propagate": True,
},
"PIL": {"handlers": ["console"], "level": "WARN", "propagate": True},
"chardet": {
"handlers": ["console"],
"level": "WARN",
"propagate": True,
},
"pagure.lib.encoding_utils": {
"handlers": ["console"],
"level": "WARN",
"propagate": False,
},
},
}
NOTE:
as you can see there is an email handler defined. It's not used anywhere by default but you can use it
to get report of errors by email and thus monitor your pagure instance. To do this the easiest is to
set, on the root logger:
'handlers': ['console', 'email'],
NOTE:
The pagure_auth logger is a special one logging all activities regarding read/write access to git
repositories. It will be a pretty important log for auditing if needed. You can separate this log
into its own file if you like by using the following handler:
"auth_handler": {
"formatter": "standard",
"class": "logging.handlers.TimedRotatingFileHandler",
"filename": "/var/log/pagure/pagure_auth.log",
"backupCount": 10,
"when": "midnight",
"utc": True,
},
This snippet will automatically make the logs rotate at midnight each day, keep the logs for 10 days
and use UTC as timezone for the logs. Depending on how your pagure instance is set-up, you may have to
tweak the filesystem permissions on the folder and file so the rotation works properly.
ITEM_PER_PAGE
This configuration key allows you to configure the length of a page by setting the number of items on the
page. Items can be commits, users, groups, or projects for example.
Defaults to: 50.
PR_TARGET_MATCHING_BRANCH
If set to True, the default target branch for all pull requests in UI is the branch that is longest
substring of the branch that the pull request is created from. For example, a mybranch branch in original
repo will be the default target of a pull request from branch mybranch-feature-1 in a fork when opening a
new pull request. If this is set to False, the default branch of the repo will be the default target of
all pull requests.
Defaults to: False.
SSH_ACCESS_GROUPS
Some instances of pagure are deployed in such a way that only the members of certain groups are allowed
to commit via ssh. This configuration key allows to specify which groups have commit access and thus let
pagure hide the ssh URL from the drop-down "Clone" menu for all the person who are not in one of these
groups. If this configuration key is not defined or left empty, it is assume that there is no such group
restriction and everyone can commit via ssh (default behavior).
Defaults to: []
SMTP configuration
SMTP_SERVER
This configuration key specifies the SMTP server to use when sending emails.
Defaults to: localhost.
See also the SMTP_STARTTLS section.
SMTP_PORT
This configuration key specifies the SMTP server port.
SMTP by default uses TCP port 25. The protocol for mail submission is the same, but uses port 587. SMTP
connections secured by SSL, known as SMTPS, default to port 465 (nonstandard, but sometimes used for
legacy reasons).
Defaults to: 25
SMTP_SSL
This configuration key specifies whether the SMTP connections should be secured over SSL.
Defaults to: False
SMTP_STARTTLS
This configuration key specifies instructs pagure to starts connecting to the SMTP server via a starttls
command.
When enabling STARTTLS in conjunction with a local smtp server, you should replace localhost with a host
name that is included in the server's certificate. If the server only relays messages originating from
localhost, then you should also ensure that the above host name resolves to the same tcp address as
localhost, for instance by adding an appropriate record to /etc/hosts.
Defaults to: False
SMTP_KEYFILE
This configuration key allows to specify a key file to be used in the starttls command when connecting to
the smtp server.
Defaults to: None
SMTP_CERTFILE
This configuration key allows to specify a certificate file to be used in the starttls command when
connecting to the smtp server.
Defaults to: None
SMTP_USERNAME
This configuration key allows usage of SMTP with auth.
Note: Specify SMTP_USERNAME and SMTP_PASSWORD for using SMTP auth
Defaults to: None
SMTP_PASSWORD
This configuration key allows usage of SMTP with auth.
Note: Specify SMTP_USERNAME and SMTP_PASSWORD for using SMTP auth
Defaults to: None
SHORT_LENGTH
This configuration key specifies the length of the commit ids or file hex displayed in the user
interface.
Defaults to: 6.
BLACKLISTED_PROJECTS
This configuration key specifies a list of project names that are forbidden. This list is used for
example to avoid conflicts at the URL level between the static files located under /static/ and a project
that would be named static and thus be located at /static.
Defaults to:
[
'static', 'pv', 'releases', 'new', 'api', 'settings',
'logout', 'login', 'users', 'groups', 'about'
]
CHECK_SESSION_IP
This configuration key specifies whether to check the user's IP address when retrieving its session. This
makes things more secure but under certain setups it might not work (for example if there are proxies in
front of the application).
Defaults to: True.
PAGURE_AUTH
This configuration key specifies which authentication method to use. Valid options are fas, openid,
oidc, or local.
• fas uses the Fedora Account System FAS <https://admin.fedoraproject.org/accounts> to provide user
authentication and enforces that users sign the FPCA.
• openid uses OpenID authentication. Any provider may be used by changing the FAS_OPENID_ENDPOINT
configuration key. By default FAS (without FPCA) will be used.
• oidc enables OpenID Connect using any provider. This provider requires the configuration options
starting with OIDC_ (see below) to be provided.
• local causes pagure to use the local pagure database for user management.
Defaults to: local.
OIDC Settings
NOTE:
Pagure uses flask-oidc to support OIDC authentication. This extension has a number of configuration
keys that may be useful depending on your set-up
OIDC_CLIENT_SECRETS
Provide a path to client secrets file on local filesystem. This file can be obtained from your OpenID
Connect identity provider. Note that some providers don't fill in userinfo_uri. If that is the case, you
need to add it to the secrets file manually.
OIDC_ID_TOKEN_COOKIE_SECURE
When this is set to True, the cookie with OpenID Connect Token will only be returned to the server via
ssl (https). If you connect to the server via plain http, the cookie will not be sent. This prevents
sniffing of the cookie contents. This may be set to False when testing your application but should
always be set to True in production.
Defaults to: True for production with https, can be set to False for convenient development.
OIDC_SCOPES
List of OpenID Connect scopes http://openid.net/specs/openid-connect-core-1_0.html#ScopeClaims to request
from identity provider.
OIDC_PAGURE_EMAIL
Name of key of user's email in userinfo JSON returned by identity provider.
OIDC_PAGURE_FULLNAME
Name of key of user's full name in userinfo JSON returned by identity provider.
OIDC_PAGURE_USERNAME
Name of key of user's preferred username in userinfo JSON returned by identity provider.
OIDC_PAGURE_SSH_KEY
Name of key of user's ssh key in userinfo JSON returned by identity provider.
OIDC_PAGURE_GROUPS
Name of key of user's groups in userinfo JSON returned by identity provider.
OIDC_PAGURE_USERNAME_FALLBACK
This specifies fallback for getting username assuming OIDC_PAGURE_USERNAME is empty - can be email (to
use the part before @) or sub (IdP-specific user id, can be a nickname, email or a numeric ID depending
on identity provider).
IP_ALLOWED_INTERNAL
This configuration key specifies which IP addresses are allowed to access the internal API endpoint.
These endpoints are accessed by the milters for example and allow performing actions in the name of
someone else which is sensitive, thus the origin of the request using these endpoints is validated.
Defaults to: ['127.0.0.1', 'localhost', '::1'].
MAX_CONTENT_LENGTH
This configuration key specifies the maximum file size allowed when uploading content to pagure (for
example, screenshots to a ticket).
Defaults to: 4 * 1024 * 1024 which corresponds to 4 megabytes.
ENABLE_TICKETS
This configuration key activates or deactivates the ticketing system for all the projects hosted on this
pagure instance.
Defaults to: True
ENABLE_TICKETS_NAMESPACE
This configuration key can be used to restrict the namespace in which the ticketing system is enabled.
So if your pagure instance has ENABLE_TICKETS as True and sets ENABLE_TICKETS_NAMESPACE to ['tests',
'infra'] only the projects opened in these two namespaces will have the ticketing system enabled. All the
other namespaces will not.
Defaults to: []
ENABLE_DOCS
This configuration key activates or deactivates creation of git repos for documentation for all the
projects hosted on this pagure instance.
Defaults to: True
ENABLE_NEW_PROJECTS
This configuration key permits or forbids creation of new projects via the user interface and the API of
this pagure instance.
Defaults to: True
ENABLE_UI_NEW_PROJECTS
This configuration key permits or forbids creation of new projects via the user interface (only) of this
pagure instance. It allows forbidding to create new project in the user interface while letting a set of
trusted person to create projects via the API granted they have the API token with the corresponding ACL.
Defaults to: True
ENABLE_DEL_PROJECTS
This configuration key permits or forbids deletion of projects via the user interface of this pagure
instance.
Defaults to: True
ENABLE_DEL_FORKS
This configuration key permits or forbids deletion of forks via the user interface of this pagure
instance.
Defaults to: ENABLE_DEL_PROJECTS
GIT_HOOK_DB_RO
This configuration key specifies if the git hook have a read-only (RO) access to the database or not.
Some pagure deployment provide an actual shell account on the host and thus the git hook called upon git
push are executed under that account. If the user manages to by-pass git and is able to access the
configuration file, they could have access to "private" information. So in those deployments the git
hooks have a specific configuration file with a database access that is read-only, making pagure behave
differently in those situations.
Defaults to: False
EMAIL_SEND
This configuration key enables or disables all email notifications for this pagure instance. This can be
useful to turn off when developing on pagure, or for test or pre-production instances.
Defaults to: False.
NOTE:
This does not disable emails to the email address set in EMAIL_ERROR.
FEDMSG_NOTIFICATIONS
This configuration key can be used to turn on or off notifications via fedmsg.
Defaults to: False.
FEDORA_MESSAGING_NOTIFICATIONS
This configuration key can be used to turn on or off sending notifications via fedora-messaging.
Defaults to: False.
ALWAYS_FEDMSG_ON_COMMITS
This configuration key can be used to enforce fedmsg notifications on commits made on all projects in a
pagure instance.
Defaults to: True.
ALLOW_DELETE_BRANCH
This configuration keys enables or disables allowing users to delete git branches from the user
interface. In sensible pagure instance you may want to turn this off and with a customized gitolite
configuration you can prevent users from deleting branches in their git repositories.
Defaults to: True.
ALLOW_ADMIN_IGNORE_EXISTING_REPOS
This enables a checkbox "Ignore existing repos" for admins when creating a new project. When this is
checkbox is checked, existing repositories will not cause project creation to fail. This could be used
to assume responsibility of existing repositories.
Defaults to: False.
USERS_IGNORE_EXISTING_REPOS
List of users who can al create a project while ignoring existing repositories.
Defaults to: [].
LOCAL_SSH_KEY
This configuration key can be used to let pagure administrate the user's ssh keys or have a third party
tool do it for you. In most cases, it will be fine to let pagure handle it.
Defaults to True.
DEPLOY_KEY
This configuration key can be used to disable the deploy keys feature of an entire pagure instance. This
feature enable to add extra public ssh keys that a third party could use to push to a project.
Defaults to True.
OLD_VIEW_COMMIT_ENABLED
In version 1.3, pagure changed its URL scheme to view the commit of a project in order to add support for
pseudo-namespaced projects.
For pagure instances older than 1.3, who care about backward compatibility, we added an endpoint
view_commit_old that brings URL backward compatibility for URLs using the complete git hash (the 40
characters). For URLs using a shorter hash, the URLs will remain broken.
This configuration key enables or disables this backward compatibility which is useful for pagure
instances running since before 1.3 but is not for newer instances.
Defaults to: False.
DISABLE_REMOTE_PR
In some pagure deployments remote pull requests need to be disabled due to legal / policy reasons.
Defaults to: False.
PAGURE_CI_SERVICES
Pagure can be configure to integrate results of a Continuous Integration (CI) service to pull-requests
open against a project.
To enable this integration, follow the documentation on how to install pagure-ci and set this
configuration key to ['jenkins'] (Jenkins being the only CI service supported at the moment).
Defaults to: None.
WARNING:
Requires Redis to be configured and running.
INSTANCE_NAME
This allows giving a name to this running instance of pagure. The name is then used in the welcome screen
shown upon first login.
Defaults to: Pagure
ADMIN_EMAIL
This configuration key allows you to change the default administrator email which is displayed on the
"about" page. It can also be used elsewhere.
Defaults to: root@localhost.localdomain
USER_NAMESPACE
This configuration key can be used to enforce that project are namespaced under the user's username,
behaving in this way in a similar fashion as github.com or gitlab.com.
Defaults to: False
DOC_APP_URL
This configuration key allows you to specify where the documentation server is running (preferably in a
different domain name entirely). If not set, the documentation page will show an error message saying
that this pagure instance does not have a documentation server.
Defaults to: None
PRIVATE_PROJECTS
This configuration key allows you to host private repositories. These repositories are visible only to
the creator of the repository and to the users who are given access to the repository. No information is
leaked about the private repository which means redis doesn't have the access to the repository and even
fedmsg doesn't get any notifications.
Defaults to: True
EXCLUDE_GROUP_INDEX
This configuration key can be used to hide project an user has access to via one of the groups listed in
this key.
The use-case is the following: the Fedora project is deploying pagure has a front-end for the git repos
of the packages in the distribution, that means about 17,000 git repositories in pagure. The project has
a group of people that have access to all of these repositories, so when viewing the user's page of one
member of that group, instead of seeing all the project that this user works on, you can see all the
projects hosted in that pagure instance. Using this configuration key, pagure will hide all the projects
that this user has access to via the specified groups and thus return only the groups of forks of that
users.
Defaults to: []
TRIGGER_CI
A run of pagure-ci can be manually triggered if some key sentences are added as comment to a
pull-request, either manually or via the "Rerun CI" dropdown. This allows one to re-run a test that
failed due to some network outage or other unexpected issues unrelated to the test suite.
This configuration key can be used to define all the sentences that can be used to trigger this pagure-ci
run. The format is following: {"<sentence>": {"name": "<name of the CI>", "description": "<short
description>"}}
Sentences which have None as value won't show up in the "Rerun CI" dropdown. Additionally, it's possible
to add a requires_project_hook_attr key to the dict with data about a sentence. For example, having
"requires_project_hook_attr": ("ci_hook", "active_pr", True) would make the "Rerun CI" dropdown have a
button for this specific CI only if the project has ci_hook activated and its active_pr value is True.
In versions before 5.2, this was a list containing just the sentences.
Defaults to: {"pretty please pagure-ci rebuild": {"name": "Default CI", "description": "Rerun default
CI"}}
NOTE:
The sentences defined in this configuration key should be lower case only!
FLAG_STATUSES_LABELS
By default, Pagure has success, failure, error, pending and canceled statuses of PR and commit flags.
This setting allows you to define a custom mapping of statuses to their respective Bootstrap labels.
FLAG_SUCCESS
Holds name of PR/commit flag that is considered a success.
Defaults to: success
FLAG_FAILURE
Holds name of PR/commit flag that is considered a failure.
Defaults to: failure
FLAG_PENDING
Holds name of PR/commit flag that is considered a pending state.
Defaults to: pending
EXTERNAL_COMMITTER
The external committer feature is a way to allow members of groups defined outside pagure (and provided
to pagure upon login by the authentication system) to be consider committers on pagure.
This feature can give access to all the projects on the instance, all but some or just some.
Defaults to: {}
To give access to all the projects to a group named fedora-altarch use a such a structure:
EXTERNAL_COMMITTER = {
'fedora-altarch': {}
}
To give access to all the projects but one (named rpms/test) to a group named provenpackager use a such a
structure:
EXTERNAL_COMMITTER = {
'fedora-altarch': {},
'provenpackager': {
'exclude': ['rpms/test']
}
}
To give access to just some projects (named rpms/test and modules/test) to a group named testers use a
such a structure:
EXTERNAL_COMMITTER = {
'fedora-altarch': {},
'provenpackager': {
'exclude': ['rpms/test']
},
'testers': {
'restrict': ['rpms/test', 'modules/test']
}
}
REQUIRED_GROUPS
The required groups allows one to specify in which group an user must be to be added to a project with
commit or admin access.
Defaults to: {}
Example configuration:
REQUIRED_GROUPS = {
'rpms/kernel': ['packager', 'kernel-team'],
'modules/*': ['module-packager', 'packager'],
'rpms/*': ['packager'],
'*': ['contributor'],
}
With this configuration (evaluated in the provided order):
• only users that are in the groups packager and kernel-team will be allowed to be added the rpms/kernel
project (where rpms is the namespace and kernel the project name).
• only users that are in the groups module-packager and packager will be allowed to be added to projects
in the modules namespace.
• only users that are in the group packager will be allowed to be added to projects in the rpms
namespace.
• only users in the contributor group will be allowed to be added to any project on this pagure instance.
GITOLITE_PRE_CONFIG
This configuration key allows you to include some content at the top of the gitolite configuration file
(such as some specific group definition), thus allowing to customize the gitolite configuration file with
elements and information that are outside of pagure's control.
This can be used in combination with GITOLITE_POST_CONFIG to further customize gitolite's configuration
file. It can also be used with EXTERNAL_COMMITTER to give commit access to git repos based on external
information.
Defaults to: None
GITOLITE_POST_CONFIG
This configuration key allows you to include some content at the end of the gitolite configuration file
(such as some project definition or access), thus allowing to customize the gitolite configuration file
with elements and information that are outside of pagure's control.
This can be used in combination with GITOLITE_PRE_CONFIG to further customize gitolite's configuration
file. It can also be used with EXTERNAL_COMMITTER to give commit access to git repos based on external
information.
Defaults to: None
GIT_GARBAGE_COLLECT
This configuration key allows for explicit running of git gc --auto after every operation that adds new
objects to any git repository - that is after pushing and merging. The reason for having this
functionality in Pagure is that gc is not guaranteed to be run by git after every object-adding
operation.
The garbage collection run by Pagure will respect git settings, so you can tweak gc.auto and
gc.autoPackLimit to your liking and that will have immediate effect on the task that runs the garbage
collection. These values can be configured system-wide in /etc/gitconfig. See
https://git-scm.com/docs/git-gc#git-gc---auto for more details.
This is especially useful if repositories are stored on NFS (or similar network storage), where file
metadata access is expensive - having unpacked objects in repositories requires a lot of metadata reads.
Note that the garbage collection is only run on repos that are not on repoSpanner.
Defaults to: False
CELERY_CONFIG
This configuration key allows you to tweak the configuration of celery for your needs. See the
documentation about celery configuration for more information.
Defaults to: {}
CASE_SENSITIVE
This configuration key can be used to make this pagure instance case sensitive instead of its default:
case-insensitive.
Defaults to: False
PROJECT_NAME_REGEX
This configuration key can be used to customize the regular expression used to validate new project name.
Defaults to: ^[a-zA-z0-9_][a-zA-Z0-9-_]*$
APPLICATION_ROOT
This configuration key is used in the path of the cookie used by pagure.
Defaults to: '/'
ALLOWED_PREFIX
This configuration key can be used to specify a list of allowed namespaces that will not require creating
a group for users to create projects in.
Defaults to: []
ADMIN_SESSION_LIFETIME
This configuration key allows specifying the lifetime of the session during which the user won't have to
re-login for admin actions. In other words, the maximum time between which an user can access a
project's settings page without re-login.
Defaults to: timedelta(minutes=20)
where timedelta comes from the python datetime module
BLACKLISTED_GROUPS
This configuration key can be used to blacklist some group names.
Defaults to: ['forks', 'group']
ENABLE_GROUP_MNGT
This configuration key can be used to turn on or off managing (ie: creating a group, adding or removing
users in that group) groups in this pagure instance. If turned off, groups and group members are to be
managed outside of pagure and synced upon login.
Defaults to: True
ENABLE_USER_MNGT
This configuration key can be used to turn on or off managing users (adding or removing them from a
project) in this pagure instance. If turned off, users are managed outside of pagure.
Defaults to: True
SESSION_COOKIE_NAME
This configuration key can be used to specify the name of the session cookie used by pagure.
Defaults to: 'pagure'
SHOW_PROJECTS_INDEX
This configuration key can be used to specify what is shown in the index page of logged in users.
Defaults to: ['repos', 'myrepos', 'myforks']
EMAIL_ON_WATCHCOMMITS
By default pagure sends an email to every one watch commits on a project when a commit is made. However
some pagure instances may be using a different notification mechanism on commits and thus may not want
this feature to double the notifications received. This configuration key can be used to turn on or off
email being sent to people watching commits on a project upon commits.
Defaults to: True
ALLOW_HTTP_PULL_PUSH
This configuration key controls whether any HTTP access to repositories is provided via the support for
that that's embedded in Pagure. This provides HTTP pull access via <pagureurl>/<reponame>.git if nothing
else serves this URL.
Defaults to: True
ALLOW_HTTP_PUSH
This configuration key controls whether pushing is possible via the HTTP interface. This is disabled by
default, as it requires setting up an authentication mechanism on the webserver that sets REMOTE_USER.
Defaults to: False
HTTP_REPO_ACCESS_GITOLITE
This configuration key configures the path to the gitolite-shell binary. If this is set to None, Git
http-backend is used directly. Only set this to None if you intend to provide HTTP push access via
Pagure, and are using a dynamic ACL backend.
Defaults to: /usr/share/gitolite3/gitolite-shell
MIRROR_SSHKEYS_FOLDER
This configuration key specificies where pagure should store the ssh keys generated for the mirroring
feature. This folder should be properly backed up and kept secure.
Defaults to: /var/lib/pagure/sshkeys/
LOG_ALL_COMMITS
This configuration key will make pagure log all commits pushed to all branches of all repositories
instead of logging only the once that are pushed to the default branch.
Defaults to: False
DISABLE_MIRROR_IN
This configuration key allows a pagure instance to not support mirroring in projects (from third party
git server).
Defaults to: False
SYNTAX_ALIAS_OVERRIDES
This configuration key can be used to force highlight.js to use a certain logic on certain files based on
their extensions.
It should be a dictionary containing the file extensions as keys and the highlighting language/category
to use as values.
Defaults to: {".spec": "specfile", ".patch": "diff"}
ALLOW_API_UPDATE_GIT_TAGS
This configuration key determines whether users are allowed to update existing git tags via the API.
When set to False, this essentially makes the API ignore whether the force argument is set or not.
Default to: True
RepoSpanner Options
Pagure can be integrated with repoSpanner allowing to deploy pagure in a load-balanced environment since
the git repositories are then synced across multiple servers simultaneously.
Support for this integration has been included in Pagure version 5.0 and higher.
Here below are the different options one can/should use to integrate pagure with repoSpanner.
REPOBRIDGE_BINARY
This should contain the path to the repoBridge binary, which is used for pushing and pulling to/from
repoSpanner.
Defaults to: /usr/libexec/repobridge.
REPOSPANNER_NEW_REPO
This configuration key instructs pagure to create new git repositories on repoSpanner or not. Its value
should be the region in which the new git repositories should be created on.
Defaults to: None.
REPOSPANNER_NEW_REPO_ADMIN_OVERRIDE
This configuration key can be used to let pagure admin override the default region used when creating new
git repositories on repoSpanner. Its value should be a boolean.
Defaults to: False
REPOSPANNER_NEW_FORK
This configuration key instructs pagure on where/how to create new git repositories for the forks with
repoSpanner. If None, git repositories for forks are created outside of repoSpanner entirely. If True,
git repositories for forks are created in the same region as the parent project. Otherwise, a region can
be directly specified where git repositories for forks will be created.
Defaults to: True
REPOSPANNER_ADMIN_MIGRATION
This configuration key can be used to let admin manually migrate individual project into repoSpanner once
it is set up.
Defaults to: False
REPOSPANNER_REGIONS
This configuration key can be used to specify the different region where repoSpanner is deployed and thus
with which this pagure instance can be integrated.
An example entry could look like:
REPOSPANNER_REGIONS = {
'default': {'url': 'https://nodea.regiona.repospanner.local:8444',
'repo_prefix': 'pagure/',
'hook': None,
'ca': '/etc/pki/repospanner/pki/ca.crt',
'admin_cert': {'cert': '/etc/pki/repospanner/pki/admin.crt',
'key': '/etc/pki/repospanner/pki/admin.key'},
'push_cert': {'cert': '/etc/pki/repospanner/pki/pagure.crt',
'key': '/etc/pki/repospanner/pki/pagure.key'}}
}
If this configuration key is not defined, pagure will consider that it is not set to be integrated with
repoSpanner.
Defaults to: {}
SSH_KEYS_USERNAME_LOOKUP
This configuration key is used by the keyhelper script to indicate that the git username should be used
and looked up. Use this if the username that is sent to ssh is specific for a unique Pagure user (i.e.
not using a single "git@" user for all git operations).
SSH_KEYS_USERNAME_FORBIDDEN
A list of usernames that are exempted from being verified via the keyhelper.
SSH_KEYS_USERNAME_EXPECT
This configuration key should contain the username that is used for git if a single SSH user is used for
all git ssh traffic (i.e. "git").
SSH_KEYS_OPTIONS
This configuration key provides the options added to keys as they are returned to sshd, in the same
format as AuthorizedKeysFile (see "AUTHORIZED_KEYS FILE FORMAT" in sshd(8)).
SSH_ADMIN_TOKEN
If not set to None, aclchecker and keyhelper will use this api admin token to get authorized to internal
endpoints that they use. The token must have the internal_access ACL.
This is useful when the IP address of sshd service is not predictable (e.g. because of running in a
distributed cloud environment) and so it's not possible to use the IP_ALLOWED_INTERNAL address list.
Defaults to: None
SSH_COMMAND_REPOSPANNER
The command to run if a repository is on repospanner when aclchecker is in use.
SSH_COMMAND_NON_REPOSPANNER
The command to run if a repository is not on repospanner when aclchecker is in use.
MQTT Options
If approprietly configured pagure supports sending messages to an MQTT message queue.
Here below are the different configuration options to make it so.
MQTT_NOTIFICATIONS
Global configuration key to turn on or off the code to send notifications to an MQTT message queue.
Defaults to: False
MQTT_HOST
Host name of the MQTT server to send the MQTT notifications to.
Defaults to: None
MQTT_PORT
Port of the MQTT server to use to send the MQTT notifications to.
Defaults to: None
MQTT_USERNAME
Username to authenticate to the MQTT server as.
Defaults to: None
MQTT_PASSWORD
Password to authenticate to the MQTT server with.
Defaults to: None
MQTT_CA_CERTS
When using SSL-based authentication to the MQTT server, use this configuration key to point to the CA
cert to use.
Defaults to: None
MQTT_CERTFILE
When using SSL-based authentication to the MQTT server, use this configuration key to point to the cert
file to use.
Defaults to: None
MQTT_KEYFILE
When using SSL-based authentication to the MQTT server, use this configuration key to point to the key
file to use.
Defaults to: None
MQTT_CERT_REQS
When using SSL-based authentication to the MQTT server, use this configuration key to specify if the CERT
is required.
Defaults to: ssl.CERT_REQUIRED (from python's ssl library)
MQTT_TLS_VERSION
When using SSL-based authentication to the MQTT server, use this configuration key to specify the TLS
protocols to support/use.
Defaults to: ssl.PROTOCOL_TLSv1_2 (from python's ssl library)
MQTT_CIPHERS
When using SSL-based authentication to the MQTT server, use this configuration key to specify the
ciphers.
Defaults to: None
MQTT_TOPIC_PREFIX
This configuration key can be used to specify a prefix to the mqtt messages sent. This prefix will be
added to the topic used by pagure thus allowing the mqtt admins to specify a parent topic for all
pagure-related messages.
Defaults to: None
ALWAYS_MQTT_ON_COMMITS
This configuration key can be used to enforce mqtt notifications on commits made on all projects in a
pagure instance.
Defaults to: False.
PAGURE_PLUGINS_CONFIG
This option can be used to specify the configuration file used for loading plugins. It is not set by
default, instead if must be declared explicitly. Also see the documentation on plugins at Plugins.
Deprecated configuration keys
FORK_FOLDER
This configuration key used to be use to specify the folder where the forks are placed. Since the release
2.0 of pagure, it has been deprecated, forks are now automatically placed in a sub-folder of the folder
containing the mains git repositories (ie GIT_FOLDER).
See the UPGRADING.rst file for more information about this change and how to handle it.
UPLOAD_FOLDER
This configuration key used to be use to specify where the uploaded releases are available. It has been
replaced by UPLOAD_FOLDER_PATH in the release 2.10 of pagure.
GITOLITE_VERSION
This configuration key specifies which version of gitolite you are using, it can be either 2 or 3.
Defaults to: 3.
This has been replaced by GITOLITE_BACKEND in the release 3.0 of pagure.
DOCS_FOLDER, REQUESTS_FOLDER, TICKETS_FOLDER
These configuration values were removed. It has been found out that due to how Pagure writes repo names
in the gitolite configuration file, these must have fixed paths relative to GIT_FOLDER. Specifically,
they must occupy subdirectories docs, requests and tickets under GIT_FOLDER. They are now computed
automatically based on value of GIT_FOLDER. Usage of docs and tickets can be triggered by setting
ENABLE_DOCS and ENABLE_TICKETS to True (this is the default).
FILE_SIZE_HIGHLIGHT
This configuration key can be used to specify the maximum number of characters a file or diff should have
to have syntax highlighting. Everything above this limit will not have syntax highlighting as this is a
memory intensive procedure that easily leads to out of memory error on large files or diff.
Defaults to: 5000
BOOTSTRAP_URLS_CSS
This configuration key can be used to specify the URL where are hosted the bootstrap CSS file since the
files hosted on apps.fedoraproject.org used in pagure.io are not restricted in browser access.
Defaults to: 'https://apps.fedoraproject.org/global/fedora-bootstrap-1.1.1/fedora-bootstrap.css'
This has been deprecated by the new way of theming pagure, see the theming documentation
BOOTSTRAP_URLS_JS
This configuration key can be used to specify the URL where are hosted the bootstrap JS file since the
files hosted on apps.fedoraproject.org used in pagure.io are not restricted in browser access.
Defaults to: 'https://apps.fedoraproject.org/global/fedora-bootstrap-1.1.1/fedora-bootstrap.js'
This has been deprecated by the new way of theming pagure, see the theming documentation
HTML_TITLE
This configuration key allows you to customize the HTML title of all the pages, from ... - pagure
(default) to ... - <your value>.
Defaults to: Pagure
This has been deprecated by the new way of theming pagure, see the theming documentation
GITOLITE_BACKEND
This configuration key allowed specifying the gitolite backend. This has now been replaced by
GIT_AUTH_BACKEND, please see that option for information on valid values.
PAGURE_PLUGIN
This configuration key allows to specify the path to the plugins configuration file. It is set as an
environment variable. It has been replaced by PAGURE_PLUGINS_CONFIG. The new variable does not modify the
behavior of the old variable, however unlike PAGURE_PLUGIN it can be set in the main Pagure
configuration.
PLUGINS
Pagure provides a mechanism for loading 3rd party plugins in the form of Flask Blueprints. The plugins
are loaded from a separate configuration file that is specified using the PAGURE_PLUGINS_CONFIG option.
There are at least two reasons for keeping plugins initialization outside the main pagure configuration
file:
1. avoid circular dependencies errors. For example if the pagure configuration imports a plugin, which in
turn imports the pagure configuration, the plugin could try to read a configuration option that has
not been imported yet and thus raise an error
2. the pagure configuration is also loaded by other processes such as Celery workers. The Celery tasks
might only be interested in reading the configuration settings without having to load any external
plugin
Loading the configuration
The configuration file can be loaded by setting the variable PAGURE_PLUGINS_CONFIG inside the pagure main
configuration file, for example inside /etc/pagure/pagure.cfg. Alternatively, it is also possible to set
the environment variable PAGURE_PLUGINS_CONFIG before starting the pagure server. If both variables are
set, the environment variable takes precedence over the configuration file.
The configuration file
After Pagure has imported the configuration file defined in PAGURE_PLUGINS_CONFIG it will look for Flask
Blueprints in a variable called PLUGINS defined in the same file, for example PLUGINS = [
plugin1.blueprint, plugin2.blueprint, ... ]. Pagure will then proceed to register any Blueprint into the
main Flask app, in the same order as they are listed in PLUGINS.
An example configuration can be seen in files/plugins.cfg.sample inside the Pagure repository.
CUSTOMIZE THE GITOLITE CONFIGURATION
Pagure provides a mechanism to allow customizing the creation and compilation of the configuration file
of gitolite.
To customize the gitolite configuration file, we invite you to look at the sources of the module
pagure.lib.git_auth.
As you can see it defines the following class:
class GitAuthHelper(object):
__metaclass__ = abc.ABCMeta
@staticmethod
@abc.abstractmethod
def generate_acls():
pass
@classmethod
@abc.abstractmethod
def remove_acls(self, session, project):
pass
This will be the class you will have to inherit from in order to inject your own code. You will then
declare an entry point in your setup.py following this template:
entry_points="""
[pagure.git_auth.helpers]
my_git_auth = my_pagure.my_module:MyGitAuthTestHelper
"""
Then you can adjust pagure's configuration file to say:
GITOLITE_BACKEND = 'my_git_auth'
DEVELOPMENT
Get the sources
Anonymous:
git clone https://pagure.io/pagure.git
Contributors:
git clone ssh://git@pagure.io/pagure.git
Dependencies
Install the build dependencies of pagure:
sudo dnf install git python-virtualenv libgit2-devel \
libjpeg-devel gcc libffi-devel redhat-rpm-config
The python dependencies of pagure are listed in the file requirements.txt at the top level of the
sources.
virtualenv pagure_env
source ./pagure_env/bin/activate
pip install pygit2==<version of libgit2 found>.* # e.g. 0.23.*
pip install -r requirements.txt
NOTE:
working in a virtualenv is tricky due to the dependency on pygit2 and thus on libgit2 but the pygit2
documentation has a solution for this.
How to run pagure
There are several options when it comes to a development environment. Vagrant will provide you with a
virtual machine which you can develop on, you can use a container to run pagure or you can install it
directly on your host machine. The README has detailed instructions for the different options.
Run pagure for development
Adjust the configuration file (secret key, database URL, admin group...) See Configuration for more
detailed information about the configuration.
Create the database scheme:
./createdb.py
Create the folder that will receive the different git repositories:
mkdir {repos,docs,forks,tickets,requests,remotes}
Run the server:
./runserver.py
If you want to change some configuration key you can create a file, place the configuration change in it
and use it with
./runserver.py -c <config_file>
For example, create the file config with in it:
from datetime import timedelta
# Makes the admin session longer
ADMIN_SESSION_LIFETIME = timedelta(minutes=20000000)
# Use a postgresql database instead of sqlite
DB_URL = 'postgresql://user:pass@localhost/pagure'
# Change the OpenID endpoint
FAS_OPENID_ENDPOINT = 'https://id.stg.fedoraproject.org'
APP_URL = '*'
EVENTSOURCE_SOURCE = 'http://localhost:8080'
EVENTSOURCE_PORT = '8080'
DOC_APP_URL = '*'
# Avoid sending email when developing
EMAIL_SEND = False
and run the server with:
./runserver.py -c config
To get some profiling information you can also run it as:
./runserver.py --profile
You should be able to access the server at http://localhost:5000
Every time you save a file, the project will be automatically restarted so you can see your change
immediately.
Create a pull-request for testing
When working on pagure, it is pretty often that one wanted to work on a feature or a bug related to
pull-requests needs to create one.
Making a pull-request for development purposes isn't hard, if you remember that since you're running a
local instance, the git repos created in your pagure instance are also local.
So here are in a few steps that one could perform to create a pull-request in a local pagure instance.
• Create a project on your pagure instance, let's say it will be called test
• Create a folder clones somewhere in your system (you probably do not want it in the repos folder
created above, next to it is fine though):
mkdir clones
• Clone the repo of the test project into this clones folder and move into it:
cd clones
git clone ~/path/to/pagure/repos/test.git
cd test
• Add and commit some files:
echo "*~" > .gitignore
git add .gitignore
git commit -m "Add a .gitignore file"
echo "BSD" > LICENSE
git add LICENSE
git commit -m "Add a LICENSE file"
• Push these changes:
git push -u origin master
• Create a new branch and add a commit in it:
git branch new_branch
git checkout new_branch
touch test
git add test
git commit -m "Add file: test"
• Push this new branch:
git push -u origin new_branch
Then go back to your pagure instance running in your web-browser, check the test project. You should see
two branches: master and new_branch. From there you should be able to open a new pull-request, either
from the front page or via the File Pull Request button in the Pull Requests page.
Coding standards
We are trying to make the code PEP8-compliant. There is a flake8 tool that can automatically check your
source.
We run the source code through black as part of the tests, so you may have to do some adjustments or run
it yourself (which is simple: black /path/to/pagure).
NOTE:
flake8 and black are available in Fedora:
dnf install python3-flake8 python3-black
or
yum install python3-flake8 python3-black
Send patch
The easiest way to work on pagure is to make your own branch in git, make your changes to this branch,
commit whenever you want, rebase on master, whenever you need and when you are done, send the patch
either by email, via the trac or a pull-request (using git or github).
The workflow would therefore be something like:
git branch <my_shiny_feature>
git checkout <my_shiny_feature>
<work>
git commit file1 file2
<more work>
git commit file3 file4
git checkout master
git pull
git checkout <my_shiny_feature>
git rebase master
git format-patch -2
This will create two patch files that you can send by email to submit in a ticket on pagure, by email or
after forking the project on pagure by submitting a pull-request (in which case the last step above git
format-patch -2 is not needed.
NOTE:
Though not required, it’s a good idea to begin the commit message with a single short (less than 50
character) line summarizing the change, followed by a blank line and then a more thorough description.
The text up to the first blank line in a commit message is treated as the commit title, and that title
is used throughout Git. For example, git-format-patch turns a commit into email, and it uses the
title on the Subject line and the rest of the commit in the body. Pagure uses lines that contain only
'Fixes #number' as references to issues. If for example a commit message of a pagure patch has a line
'Fixes #3547' and a pullrequest (PR) gets created in pagure, this PR will be linked to from
https://pagure.io/pagure/issue/3547
Unit-tests
Pagure has a number of unit-tests.
We aim at having a full (100%) coverage of the whole code (including the Flask application) and of course
a smart coverage as in we want to check that the functions work the way we want but also that they fail
when we expect it and the way we expect it.
Tests checking that function are failing when/how we want are as important as tests checking they work
the way they are intended to.
So here are a few steps that one could perform to run unit-tests in a local pagure instance.
• Install the dependencies:
pip install -r requirements-testing.txt
• Run it:
tox ./test/
If you want to run a single interpreter, cou can use:
tox -e py38 ./test/
Each unit-tests files (located under tests/) can be called by alone, allowing easier debugging of the
tests. For example:
pytest-3 tests/test_pagure_lib.py
NOTE:
In order to have coverage information you might have to install python-coverage
dnf install python3-pytest-cov
To run the unit-tests, there is also a container available with all the dependencies needed. Use the
following command to run the tests
$ ./dev/run-tests-container.py
This command will build a fedora based container and execute the test suite. You can also limit the
tests to unit-test files or single tests similar to the options described above. You need set the
environment variables REPO and BRANCH if the tests are not yet available in the upstream pagure master
branch.
CONTRIBUTING
If you're submitting patches to pagure, please observe the following:
• Check that your python code is PEP8-compliant. There is a flake8 tool that automatically checks the
sources as part of the tests.
• We run the source code through black as part of the tests, so you may have to do some adjustments or
run it yourself (which is simple: black /path/to/pagure).
• Check that your code doesn't break the test suite. The test suite can be run using tox at the top of
the sources, you mayuse tox -e py38 ./test/ to run a single version of python. You can also run a
single file by calling pytest directly: pytest-3 tests/test_style.py. See Development for more
information about the test suite.
• If you are adding new code, please write tests for them in tests/, tox . will run the tests and show
you the coverage of the code by the unit-tests.
• If your change warrants a modification to the docs in doc/ or any docstrings in pagure/ please make
that modification.
NOTE:
You have a doubt, you don't know how to do something, you have an idea but don't know how to implement
it, you just have something bugging you?
Come to see us on IRC: #pagure or #fedora-apps on irc.freenode.net or directly on the project.
CONTRIBUTORS TO PAGURE
Pagure would be nothing without its contributors.
On May 14, 2019 (release 5.10.0) the list looks as follow:
─────────────────────────────────────────────────────────────
Number of commits Contributor
─────────────────────────────────────────────────────────────
6799 Pierre-Yves Chibon <‐
pingou@pingoured.fr>
─────────────────────────────────────────────────────────────
328 Ryan Lerch <rlerch@redhat.com>
─────────────────────────────────────────────────────────────
172 Vivek Anand <‐
vivekanand1101@gmail.com>
─────────────────────────────────────────────────────────────
144 Julen Landa Alustiza <‐
jlanda@fedoraproject.org>
─────────────────────────────────────────────────────────────
139 farhaanbukhsh <‐
farhaan.bukhsh@gmail.com>
─────────────────────────────────────────────────────────────
134 Clement Verna <cverna@tutanota.com>
─────────────────────────────────────────────────────────────
133 Patrick Uiterwijk <‐
puiterwijk@redhat.com>
─────────────────────────────────────────────────────────────
98 Patrick Uiterwijk <‐
patrick@puiterwijk.org>
─────────────────────────────────────────────────────────────
88 Farhaan Bukhsh <‐
farhaan.bukhsh@gmail.com>
─────────────────────────────────────────────────────────────
64 Slavek Kabrda <bkabrda@redhat.com>
─────────────────────────────────────────────────────────────
59 Johan Cwiklinski <johan@x-tnd.be>
─────────────────────────────────────────────────────────────
52 Karsten Hopp <karsten@redhat.com>
─────────────────────────────────────────────────────────────
47 Mark Reynolds <mreynolds@redhat.com>
─────────────────────────────────────────────────────────────
36 Neal Gompa <ngompa13@gmail.com>
─────────────────────────────────────────────────────────────
33 Lubomír Sedlář <lsedlar@redhat.com>
─────────────────────────────────────────────────────────────
32 Matt Prahl <mprahl@redhat.com>
─────────────────────────────────────────────────────────────
32 Pradeep CE (cep) <‐
breathingcode@gmail.com>
─────────────────────────────────────────────────────────────
25 Lubomír Sedlář <‐
lubomir.sedlar@gmail.com>
─────────────────────────────────────────────────────────────
23 rahul Bajaj <you@example.com>
─────────────────────────────────────────────────────────────
20 Jeremy Cline <jeremy@jcline.org>
─────────────────────────────────────────────────────────────
19 Aurélien Bompard <‐
aurelien@bompard.org>
─────────────────────────────────────────────────────────────
19 Fabien Boucher <fboucher@redhat.com>
─────────────────────────────────────────────────────────────
19 Gaurav Kumar <aavrug@gmail.com>
─────────────────────────────────────────────────────────────
19 Lenka Segura <lenka@sepu.cz>
─────────────────────────────────────────────────────────────
18 Abhijeet Kasurde <‐
akasurde@redhat.com>
─────────────────────────────────────────────────────────────
18 Sayan Chowdhury <‐
sayan.chowdhury2012@gmail.com>
─────────────────────────────────────────────────────────────
17 Adam Williamson <awilliam@redhat.com>
─────────────────────────────────────────────────────────────
17 Brian Stinson <brian@bstinson.com>
─────────────────────────────────────────────────────────────
17 Ralph Bean <rbean@redhat.com>
─────────────────────────────────────────────────────────────
15 Igor Gnatenko <‐
ignatenkobrain@fedoraproject.org>
─────────────────────────────────────────────────────────────
15 Vibhor Verma <vibhcool@gmail.com>
─────────────────────────────────────────────────────────────
14 Justin W. Flory <git@jwf.io>
─────────────────────────────────────────────────────────────
13 Ghost-script <subho.prp@gmail.com>
─────────────────────────────────────────────────────────────
13 Martin Basti <mbasti@redhat.com>
─────────────────────────────────────────────────────────────
13 Mathieu Bridon <‐
bochecha@fedoraproject.org>
─────────────────────────────────────────────────────────────
11 Shengjing Zhu <zsj950618@gmail.com>
─────────────────────────────────────────────────────────────
9 Michael Watters <‐
michael.watters@dart.biz>
─────────────────────────────────────────────────────────────
9 mprahl <mprahl@redhat.com>
─────────────────────────────────────────────────────────────
8 Lei Yang <yltt1234512@gmail.com>
─────────────────────────────────────────────────────────────
8 Paul W. Frields <stickster@gmail.com>
─────────────────────────────────────────────────────────────
7 René Genz <liebundartig@freenet.de>
─────────────────────────────────────────────────────────────
7 Sergio Durigan Junior <‐
sergiodj@sergiodj.net>
─────────────────────────────────────────────────────────────
7 zPlus <zplus@peers.community>
─────────────────────────────────────────────────────────────
6 Michael Scherer <misc@redhat.com>
─────────────────────────────────────────────────────────────
6 ymdatta <ymdatta@protonmail.com>
─────────────────────────────────────────────────────────────
5 Fabio Valentini <‐
decathorpe@gmail.com>
─────────────────────────────────────────────────────────────
5 Lukas Holecek <hluk@email.cz>
─────────────────────────────────────────────────────────────
5 Mike McLean <mikem@redhat.com>
─────────────────────────────────────────────────────────────
5 Oliver Gutierrez <‐
ogutierrez@redhat.com>
─────────────────────────────────────────────────────────────
5 Shaily <shaily15297@yahoo.com>
─────────────────────────────────────────────────────────────
5 Till Maas <opensource@till.name>
─────────────────────────────────────────────────────────────
5 jingjing <sanri.ok@163.com>
─────────────────────────────────────────────────────────────
5 vanzhiganov <vanzhiganov@ya.ru>
─────────────────────────────────────────────────────────────
5 yangl1996 <yltt1234512@gmail.com>
─────────────────────────────────────────────────────────────
4 Alex Gleason <alex@alexgleason.me>
─────────────────────────────────────────────────────────────
4 Eric Barbour <ebarbour@redhat.com>
─────────────────────────────────────────────────────────────
4 Maciej Lasyk <maciek@lasyk.info>
─────────────────────────────────────────────────────────────
4 clime <clime@redhat.com>
─────────────────────────────────────────────────────────────
3 Akanksha <‐
akanksha_mishra01@yahoo.com>
─────────────────────────────────────────────────────────────
3 Andrew Engelbrecht <‐
andrew@engelbrecht.io>
─────────────────────────────────────────────────────────────
3 Ankush Behl <cloudbehl@gmail.com>
─────────────────────────────────────────────────────────────
3 Anthony Lackey <alackey96@gmail.com>
─────────────────────────────────────────────────────────────
3 Chenxiong Qi <cqi@redhat.com>
─────────────────────────────────────────────────────────────
3 Dhriti Shikhar <‐
dhriti.shikhar.rokz@gmail.com>
─────────────────────────────────────────────────────────────
3 Eric Barbour <emb4gu@virginia.edu>
─────────────────────────────────────────────────────────────
3 FeRD (Frank Dana) <ferdnyc@gmail.com>
─────────────────────────────────────────────────────────────
3 Jan Pokorný <jpokorny@redhat.com>
─────────────────────────────────────────────────────────────
3 Jason Tibbitts <tibbs@math.uh.edu>
─────────────────────────────────────────────────────────────
3 Kushal Khandelwal <‐
kushal124@gmail.com>
─────────────────────────────────────────────────────────────
3 Michal Konečný <mkonecny@redhat.com>
─────────────────────────────────────────────────────────────
3 Miro Hrončok <miro@hroncok.cz>
─────────────────────────────────────────────────────────────
3 Pedro Lima <pedro.lima@gmail.com>
─────────────────────────────────────────────────────────────
3 Pierre-YvesChibon <‐
pingou@fedoraproject.org>
─────────────────────────────────────────────────────────────
3 Ricky Elrod <ricky@elrod.me>
─────────────────────────────────────────────────────────────
3 Ryan Lerch <‐
rlerch@localhost.localdomain>
─────────────────────────────────────────────────────────────
3 Stefan Bühler <stbuehler@web.de>
─────────────────────────────────────────────────────────────
3 bill auger <mr.j.spam.me@gmail.com>
─────────────────────────────────────────────────────────────
3 cep <breathingcode@gmail.com>
─────────────────────────────────────────────────────────────
3 shivani <smshivani579@gmail.com>
─────────────────────────────────────────────────────────────
3 skrzepto <shims506@gmail.com>
─────────────────────────────────────────────────────────────
3 tenstormavi <‐
avi.avinash3008@gmail.com>
─────────────────────────────────────────────────────────────
2 Akshay Gaikwad <‐
akgaikwad001@gmail.com>
─────────────────────────────────────────────────────────────
2 Anatoli Babenia <‐
anatoli@rainforce.org>
─────────────────────────────────────────────────────────────
2 Björn Persson <Bjorn@Rombobjörn.se>
─────────────────────────────────────────────────────────────
2 Carlos Mogas da Silva <‐
r3pek@r3pek.org>
─────────────────────────────────────────────────────────────
2 Daniel Mach <dmach@redhat.com>
─────────────────────────────────────────────────────────────
2 Fabian Arrotin <‐
fabian.arrotin@arrfab.net>
─────────────────────────────────────────────────────────────
2 Hervé Beraud <hberaud@redhat.com>
─────────────────────────────────────────────────────────────
2 Kamil Páral <kparal@redhat.com>
─────────────────────────────────────────────────────────────
2 Luis Guzman <ark@switnet.org>
─────────────────────────────────────────────────────────────
2 MR <mrx@mailinator.com>
─────────────────────────────────────────────────────────────
2 Neha Kandpal <iec2015048@iiita.ac.in>
─────────────────────────────────────────────────────────────
2 Nuno Maltez <nuno@cognitiva.com>
─────────────────────────────────────────────────────────────
2 Ompragash <om.apsara@gmail.com>
─────────────────────────────────────────────────────────────
2 Peter Oliver <git@mavit.org.uk>
─────────────────────────────────────────────────────────────
2 Rahul Bajaj <rahulrb0509@gmail.com>
─────────────────────────────────────────────────────────────
2 Richard Marko <‐
rmarko@fedoraproject.org>
─────────────────────────────────────────────────────────────
2 Simo Sorce <simo@redhat.com>
─────────────────────────────────────────────────────────────
2 Stasiek Michalski <‐
hellcp@opensuse.org>
─────────────────────────────────────────────────────────────
2 Tim Flink <tflink@fedoraproject.org>
─────────────────────────────────────────────────────────────
2 Tim Landscheidt <‐
tim@tim-landscheidt.de>
─────────────────────────────────────────────────────────────
2 Todd Zullinger <tmz@pobox.com>
─────────────────────────────────────────────────────────────
2 William Moreno Reyes <‐
williamjmorenor@gmail.com>
─────────────────────────────────────────────────────────────
2 Your Name <jlanda@fedoraproject.org>
─────────────────────────────────────────────────────────────
2 bruno <bruno@wolff.to>
─────────────────────────────────────────────────────────────
2 dhrish20 <dhrish20@gmail.com>
─────────────────────────────────────────────────────────────
2 hellcp <hellcp@opensuse.org>
─────────────────────────────────────────────────────────────
2 yadneshk <yadnesh45@gmail.com>
─────────────────────────────────────────────────────────────
2 “AnjaliPardeshi” <“‐
anjalipardeshi92@gmail.com”>
─────────────────────────────────────────────────────────────
1 Akanksha Mishra <‐
akanksha_mishra01@yahoo.com>
─────────────────────────────────────────────────────────────
1 Aleksandra Fedorova (bookwar) <‐
afedorova@mirantis.com>
─────────────────────────────────────────────────────────────
1 Alexander Scheel <ascheel@redhat.com>
─────────────────────────────────────────────────────────────
1 Alois Mahdal <amahdal@redhat.com>
─────────────────────────────────────────────────────────────
1 Amol Kahat <akahat@redhat.com>
─────────────────────────────────────────────────────────────
1 Anthony Lackey <‐
alackey@localhost.localdomain>
─────────────────────────────────────────────────────────────
1 Antoni Segura Puimedon <‐
celebdor@gmail.com>
─────────────────────────────────────────────────────────────
1 Arti Laddha <artiladdha53@gmail.com>
─────────────────────────────────────────────────────────────
1 Brian (bex) Exelbierd <bex@pobox.com>
─────────────────────────────────────────────────────────────
1 Carl George <carl@george.computer>
─────────────────────────────────────────────────────────────
1 Charelle Collett <‐
ccollett@redhat.com>
─────────────────────────────────────────────────────────────
1 David Caro <dcaroest@redhat.com>
─────────────────────────────────────────────────────────────
1 Devesh Kumar Singh <‐
deveshkusingh@gmail.com>
─────────────────────────────────────────────────────────────
1 Eashan <eashankadam@gmail.com>
─────────────────────────────────────────────────────────────
1 Felix Yan <felixonmars@users.sf.net>
─────────────────────────────────────────────────────────────
1 Filip Valder <fvalder@redhat.com>
─────────────────────────────────────────────────────────────
1 Frank Dana (FeRD) <ferdnyc@gmail.com>
┌───────────────────┬───────────────────────────────────────┐
│ 1 │ Haikel Guemar <‐ │
│ │ hguemar@fedoraproject.org> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Hazel Smith <hazel@hazelesque.uk> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Jeremy Cline <jcline@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Jingjing Shao <sanri.ok@163.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ John Florian <jflorian@doubledog.org> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Jun Aruga <jaruga@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Ken Dreyer <kdreyer@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Kunaal Jain <kunaalus@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Mary Kate Fain <mk@marykatefain.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Mathew Robinson <‐ │
│ │ mathew.robinson3114@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Michal Srb <michal@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Mohan Boddu <mboddu@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Nils Philippsen <nils@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Pavel Raiskup <praiskup@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Peter Kolínek <fedora@pessoft.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Petr Šplíchal <psplicha@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Randy Barlow <‐ │
│ │ randy@electronsweatshop.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Robert Bost <rbost@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Romain DEP. <rom1dep@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Ryan Lerch <ryanlerch@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Sachin Kamath <sskamath96@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Snehal Karale <skarale@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Stanislav Laznicka <‐ │
│ │ slaznick@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Stanislav Ochotnicky <‐ │
│ │ sochotnicky@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Stephen Gallagher <‐ │
│ │ sgallagh@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Tiago M. Vieira <tiago@tvieira.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Till Hofmann <‐ │
│ │ hofmann@kbsg.rwth-aachen.de> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Vadim Rutkovsky <vrutkovs@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Vyacheslav Anzhiganov <‐ │
│ │ vanzhiganov@ya.ru> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ Yves Martin <ymartin1040@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ abhishek <abhishekarora12@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ abhishek goswami <‐ │
│ │ abhishekg785@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ alunux <fadlun.net@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ anar <anaradilovab@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ anatoly techtonik <‐ │
│ │ techtonik@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ anshukira <aks.anshu03@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ chocos10 <iec2015048@iiita.ac.in> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ d3prof3t <saurabhpysharma@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ ishcherb <ishcherb@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ jcvicelli <jcvicelli@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ josef radinger <‐ │
│ │ cheese@nosuchhost.net> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ midipix <writeonce@midipix.org> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ mrx@mailinator.com <‐ │
│ │ mrx@mailinator.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ pingou <pingou@fedoraproject.org> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ prasad0896 <shendep@yahoo.co.in> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ rishika7000 <rishika7000@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ ryanlerch <rlerch@redhat.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ sclark <‐ │
│ │ simon.richard.clark@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ skrzepto <skrzepto@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ smit thakkar <‐ │
│ │ smitthakkar96@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ smurfix <matthias@urlichs.de> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ vibhcool <vibhcool@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ vivekanand1101 <‐ │
│ │ vivekanand1101@gmail.com> │
├───────────────────┼───────────────────────────────────────┤
│ 1 │ waifu <heweyo6819@ualmail.com> │
└───────────────────┴───────────────────────────────────────┘
This list is generated using
git shortlog -s -n -e
The old pagure logo has been created by Micah Denn <micah.denn@gmail.com>, the new one, as well as the
entire version 2 of the user interface (using bootstrap) is the work of Ryan Lerch <rlerch@redhat.com>
many thanks to them for their work and understanding during the process.
RUNS HERE
List of locations where Pagure is currently used
Please add yourself here if you run a local version of Pagure. Please also describe what you are using it
for.
┌───┬──────────┬───────────────────────────────┬────────────────────────┐
│ # │ Project │ Site Name │ Used for │
├───┼──────────┼───────────────────────────────┼────────────────────────┤
│ 0 │ Fedora │ https://src.fedoraproject.org │ Development of Fedora │
│ │ │ │ Linux distribution │
├───┼──────────┼───────────────────────────────┼────────────────────────┤
│ 1 │ CentOS │ https://git.centos.org │ Development of CentOS │
│ │ │ │ Linux distribution │
├───┼──────────┼───────────────────────────────┼────────────────────────┤
│ 2 │ Midipix │ https://dev.midipix.org │ Development of Midipix │
│ │ │ │ and related projects │
├───┼──────────┼───────────────────────────────┼────────────────────────┤
│ 3 │ Cool Bug │ https://repo.coolbug.org │ Development of │
│ │ │ │ personal projects │
└───┴──────────┴───────────────────────────────┴────────────────────────┘
This documentation is generated from the doc folder in the pagure's sources. Feel free to report issues
about the documentation on the pagure issue tracker or even better, contribute to it!
• Index
• Module Index
• Search Page
AUTHOR
Pierre-Yves Chibon <pingou@pingoured.fr>
COPYRIGHT
2024, Red Hat Inc, Pierre-Yves Chibon <pingou@pingoured.fr>
5.11.3 Aug 25, 2024 PAGURE(1)