Provided by: openssl_3.0.13-0ubuntu3.5_amd64 
NAME
openssl-x509 - Certificate display and signing command
SYNOPSIS
openssl x509 [-help] [-in filename|uri] [-passin arg] [-new] [-x509toreq] [-req] [-copy_extensions arg]
[-inform DER|PEM] [-vfyopt nm:v] [-key filename|uri] [-keyform DER|PEM|P12|ENGINE] [-signkey
filename|uri] [-out filename] [-outform DER|PEM] [-nocert] [-noout] [-dateopt] [-text] [-certopt option]
[-fingerprint] [-alias] [-serial] [-startdate] [-enddate] [-dates] [-subject] [-issuer] [-nameopt option]
[-email] [-hash] [-subject_hash] [-subject_hash_old] [-issuer_hash] [-issuer_hash_old] [-ext extensions]
[-ocspid] [-ocsp_uri] [-purpose] [-pubkey] [-modulus] [-checkend num] [-checkhost host] [-checkemail
host] [-checkip ipaddr] [-set_serial n] [-next_serial] [-days arg] [-preserve_dates] [-subj arg]
[-force_pubkey filename] [-clrext] [-extfile filename] [-extensions section] [-sigopt nm:v] [-badsig]
[-digest] [-CA filename|uri] [-CAform DER|PEM|P12] [-CAkey filename|uri] [-CAkeyform DER|PEM|P12|ENGINE]
[-CAserial filename] [-CAcreateserial] [-trustout] [-setalias arg] [-clrtrust] [-addtrust arg]
[-clrreject] [-addreject arg] [-rand files] [-writerand file] [-engine id] [-provider name]
[-provider-path path] [-propquery propq]
DESCRIPTION
This command is a multi-purposes certificate handling command. It can be used to print certificate
information, convert certificates to various forms, edit certificate trust settings, generate
certificates from scratch or from certificating requests and then self-signing them or signing them like
a "micro CA".
Since there are a large number of options they will split up into various sections.
OPTIONS
Input, Output, and General Purpose Options
-help
Print out a usage message.
-in filename|uri
This specifies the input to read a certificate from or the input file for reading a certificate
request if the -req flag is used. In both cases this defaults to standard input.
This option cannot be combined with the -new flag.
-passin arg
The key and certificate file password source. For more information about the format of arg see
openssl-passphrase-options(1).
-new
Generate a certificate from scratch, not using an input certificate or certificate request. So the
-in option must not be used in this case. Instead, the -subj option needs to be given. The public
key to include can be given with the -force_pubkey option and defaults to the key given with the -key
(or -signkey) option, which implies self-signature.
-x509toreq
Output a PKCS#10 certificate request (rather than a certificate). The -key (or -signkey) option must
be used to provide the private key for self-signing; the corresponding public key is placed in the
subjectPKInfo field.
X.509 extensions included in a certificate input are not copied by default. X.509 extensions to be
added can be specified using the -extfile option.
-req
By default a certificate is expected on input. With this option a PKCS#10 certificate request is
expected instead, which must be correctly self-signed.
X.509 extensions included in the request are not copied by default. X.509 extensions to be added can
be specified using the -extfile option.
-copy_extensions arg
Determines how to handle X.509 extensions when converting from a certificate to a request using the
-x509toreq option or converting from a request to a certificate using the -req option. If arg is
none or this option is not present then extensions are ignored. If arg is copy or copyall then all
extensions are copied, except that subject identifier and authority key identifier extensions are not
taken over when producing a certificate request.
The -ext option can be used to further restrict which extensions to copy.
-inform DER|PEM
The input file format; unspecified by default. See openssl-format-options(1) for details.
-vfyopt nm:v
Pass options to the signature algorithm during verify operations. Names and values of these options
are algorithm-specific.
-key filename|uri
This option provides the private key for signing a new certificate or certificate request. Unless
-force_pubkey is given, the corresponding public key is placed in the new certificate or certificate
request, resulting in a self-signature.
This option cannot be used in conjunction with the -CA option.
It sets the issuer name to the subject name (i.e., makes it self-issued) and changes the public key
to the supplied value (unless overridden by -force_pubkey). Unless the -preserve_dates option is
supplied, it sets the validity start date to the current time and the end date to a value determined
by the -days option.
-signkey filename|uri
This option is an alias of -key.
-keyform DER|PEM|P12|ENGINE
The key input format; unspecified by default. See openssl-format-options(1) for details.
-out filename
This specifies the output filename to write to or standard output by default.
-outform DER|PEM
The output format; the default is PEM. See openssl-format-options(1) for details.
-nocert
Do not output a certificate (except for printing as requested by below options).
-noout
This option prevents output except for printing as requested by below options.
Certificate Printing Options
Note: the -alias and -purpose options are also printing options but are described in the "Trust Settings"
section.
-dateopt
Specify the date output format. Values are: rfc_822 and iso_8601. Defaults to rfc_822.
-text
Prints out the certificate in text form. Full details are printed including the public key, signature
algorithms, issuer and subject names, serial number any extensions present and any trust settings.
-certopt option
Customise the print format used with -text. The option argument can be a single option or multiple
options separated by commas. The -certopt switch may be also be used more than once to set multiple
options. See the "Text Printing Flags" section for more information.
-fingerprint
Calculates and prints the digest of the DER encoded version of the entire certificate (see digest
options). This is commonly called a "fingerprint". Because of the nature of message digests, the
fingerprint of a certificate is unique to that certificate and two certificates with the same
fingerprint can be considered to be the same.
-alias
Prints the certificate "alias" (nickname), if any.
-serial
Prints the certificate serial number.
-startdate
Prints out the start date of the certificate, that is the notBefore date.
-enddate
Prints out the expiry date of the certificate, that is the notAfter date.
-dates
Prints out the start and expiry dates of a certificate.
-subject
Prints the subject name.
-issuer
Prints the issuer name.
-nameopt option
This specifies how the subject or issuer names are displayed. See openssl-namedisplay-options(1) for
details.
-email
Prints the email address(es) if any.
-hash
Synonym for "-subject_hash" for backward compatibility reasons.
-subject_hash
Prints the "hash" of the certificate subject name. This is used in OpenSSL to form an index to allow
certificates in a directory to be looked up by subject name.
-subject_hash_old
Prints the "hash" of the certificate subject name using the older algorithm as used by OpenSSL before
version 1.0.0.
-issuer_hash
Prints the "hash" of the certificate issuer name.
-issuer_hash_old
Prints the "hash" of the certificate issuer name using the older algorithm as used by OpenSSL before
version 1.0.0.
-ext extensions
Prints out the certificate extensions in text form. Can also be used to restrict which extensions to
copy. Extensions are specified with a comma separated string, e.g.,
"subjectAltName,subjectKeyIdentifier". See the x509v3_config(5) manual page for the extension names.
-ocspid
Prints the OCSP hash values for the subject name and public key.
-ocsp_uri
Prints the OCSP responder address(es) if any.
-purpose
This option performs tests on the certificate extensions and outputs the results. For a more complete
description see "Certificate Extensions" in openssl-verification-options(1).
-pubkey
Prints the certificate's SubjectPublicKeyInfo block in PEM format.
-modulus
This option prints out the value of the modulus of the public key contained in the certificate.
Certificate Checking Options
-checkend arg
Checks if the certificate expires within the next arg seconds and exits nonzero if yes it will expire
or zero if not.
-checkhost host
Check that the certificate matches the specified host.
-checkemail email
Check that the certificate matches the specified email address.
-checkip ipaddr
Check that the certificate matches the specified IP address.
Certificate Output Options
-set_serial n
Specifies the serial number to use. This option can be used with the -key, -signkey, or -CA options.
If used in conjunction with the -CA option the serial number file (as specified by the -CAserial
option) is not used.
The serial number can be decimal or hex (if preceded by "0x").
-next_serial
Set the serial to be one more than the number in the certificate.
-days arg
Specifies the number of days until a newly generated certificate expires. The default is 30. Cannot
be used together with the -preserve_dates option.
-preserve_dates
When signing a certificate, preserve "notBefore" and "notAfter" dates of any input certificate
instead of adjusting them to current time and duration. Cannot be used together with the -days
option.
-subj arg
When a certificate is created set its subject name to the given value. When the certificate is self-
signed the issuer name is set to the same value.
The arg must be formatted as "/type0=value0/type1=value1/type2=...". Special characters may be
escaped by "\" (backslash), whitespace is retained. Empty values are permitted, but the
corresponding type will not be included in the certificate. Giving a single "/" will lead to an
empty sequence of RDNs (a NULL-DN). Multi-valued RDNs can be formed by placing a "+" character
instead of a "/" between the AttributeValueAssertions (AVAs) that specify the members of the set.
Example:
"/DC=org/DC=OpenSSL/DC=users/UID=123456+CN=John Doe"
This option can be used in conjunction with the -force_pubkey option to create a certificate even
without providing an input certificate or certificate request.
-force_pubkey filename
When a certificate is created set its public key to the key in filename instead of the key contained
in the input or given with the -key (or -signkey) option.
This option is useful for creating self-issued certificates that are not self-signed, for instance
when the key cannot be used for signing, such as DH. It can also be used in conjunction with -new
and -subj to directly generate a certificate containing any desired public key.
-clrext
When transforming a certificate to a new certificate by default all certificate extensions are
retained.
When transforming a certificate or certificate request, the -clrext option prevents taking over any
extensions from the source. In any case, when producing a certificate request, neither subject
identifier nor authority key identifier extensions are included.
-extfile filename
Configuration file containing certificate and request X.509 extensions to add.
-extensions section
The section in the extfile to add X.509 extensions from. If this option is not specified then the
extensions should either be contained in the unnamed (default) section or the default section should
contain a variable called "extensions" which contains the section to use. See the x509v3_config(5)
manual page for details of the extension section format.
-sigopt nm:v
Pass options to the signature algorithm during sign operations. This option may be given multiple
times. Names and values provided using this option are algorithm-specific.
-badsig
Corrupt the signature before writing it; this can be useful for testing.
-digest
The digest to use. This affects any signing or printing option that uses a message digest, such as
the -fingerprint, -key, and -CA options. Any digest supported by the openssl-dgst(1) command can be
used. If not specified then SHA1 is used with -fingerprint or the default digest for the signing
algorithm is used, typically SHA256.
Micro-CA Options
-CA filename|uri
Specifies the "CA" certificate to be used for signing. When present, this behaves like a "micro CA"
as follows: The subject name of the "CA" certificate is placed as issuer name in the new certificate,
which is then signed using the "CA" key given as detailed below.
This option cannot be used in conjunction with -key (or -signkey). This option is normally combined
with the -req option referencing a CSR. Without the -req option the input must be an existing
certificate unless the -new option is given, which generates a certificate from scratch.
-CAform DER|PEM|P12,
The format for the CA certificate; unspecified by default. See openssl-format-options(1) for
details.
-CAkey filename|uri
Sets the CA private key to sign a certificate with. The private key must match the public key of the
certificate given with -CA. If this option is not provided then the key must be present in the -CA
input.
-CAkeyform DER|PEM|P12|ENGINE
The format for the CA key; unspecified by default. See openssl-format-options(1) for details.
-CAserial filename
Sets the CA serial number file to use.
When creating a certificate with this option and with the -CA option, the certificate serial number
is stored in the given file. This file consists of one line containing an even number of hex digits
with the serial number used last time. After reading this number, it is incremented and used, and
the file is updated.
The default filename consists of the CA certificate file base name with .srl appended. For example if
the CA certificate file is called mycacert.pem it expects to find a serial number file called
mycacert.srl.
If the -CA option is specified and neither <-CAserial> or <-CAcreateserial> is given and the default
serial number file does not exist, a random number is generated; this is the recommended practice.
-CAcreateserial
With this option and the -CA option the CA serial number file is created if it does not exist. A
random number is generated, used for the certificate, and saved into the serial number file
determined as described above.
Trust Settings
A trusted certificate is an ordinary certificate which has several additional pieces of information
attached to it such as the permitted and prohibited uses of the certificate and possibly an "alias"
(nickname).
Normally when a certificate is being verified at least one certificate must be "trusted". By default a
trusted certificate must be stored locally and must be a root CA: any certificate chain ending in this CA
is then usable for any purpose.
Trust settings currently are only used with a root CA. They allow a finer control over the purposes the
root CA can be used for. For example, a CA may be trusted for SSL client but not SSL server use.
See openssl-verification-options(1) for more information on the meaning of trust settings.
Future versions of OpenSSL will recognize trust settings on any certificate: not just root CAs.
-trustout
Mark any certificate PEM output as <trusted> certificate rather than ordinary. An ordinary or
trusted certificate can be input but by default an ordinary certificate is output and any trust
settings are discarded. With the -trustout option a trusted certificate is output. A trusted
certificate is automatically output if any trust settings are modified.
-setalias arg
Sets the "alias" of the certificate. This will allow the certificate to be referred to using a
nickname for example "Steve's Certificate".
-clrtrust
Clears all the permitted or trusted uses of the certificate.
-addtrust arg
Adds a trusted certificate use. Any object name can be used here but currently only clientAuth,
serverAuth, emailProtection, and anyExtendedKeyUsage are defined. As of OpenSSL 1.1.0, the last of
these blocks all purposes when rejected or enables all purposes when trusted. Other OpenSSL
applications may define additional uses.
-clrreject
Clears all the prohibited or rejected uses of the certificate.
-addreject arg
Adds a prohibited trust anchor purpose. It accepts the same values as the -addtrust option.
Generic options
-rand files, -writerand file
See "Random State Options" in openssl(1) for details.
-engine id
See "Engine Options" in openssl(1). This option is deprecated.
-provider name
-provider-path path
-propquery propq
See "Provider Options" in openssl(1), provider(7), and property(7).
Text Printing Flags
As well as customising the name printing format, it is also possible to customise the actual fields
printed using the certopt option when the text option is present. The default behaviour is to print all
fields.
compatible
Use the old format. This is equivalent to specifying no printing options at all.
no_header
Don't print header information: that is the lines saying "Certificate" and "Data".
no_version
Don't print out the version number.
no_serial
Don't print out the serial number.
no_signame
Don't print out the signature algorithm used.
no_validity
Don't print the validity, that is the notBefore and notAfter fields.
no_subject
Don't print out the subject name.
no_issuer
Don't print out the issuer name.
no_pubkey
Don't print out the public key.
no_sigdump
Don't give a hexadecimal dump of the certificate signature.
no_aux
Don't print out certificate trust information.
no_extensions
Don't print out any X509V3 extensions.
ext_default
Retain default extension behaviour: attempt to print out unsupported certificate extensions.
ext_error
Print an error message for unsupported certificate extensions.
ext_parse
ASN1 parse unsupported extensions.
ext_dump
Hex dump unsupported extensions.
ca_default
The value used by openssl-ca(1), equivalent to no_issuer, no_pubkey, no_header, and no_version.
EXAMPLES
Note: in these examples the '\' means the example should be all on one line.
Print the contents of a certificate:
openssl x509 -in cert.pem -noout -text
Print the "Subject Alternative Name" extension of a certificate:
openssl x509 -in cert.pem -noout -ext subjectAltName
Print more extensions of a certificate:
openssl x509 -in cert.pem -noout -ext subjectAltName,nsCertType
Print the certificate serial number:
openssl x509 -in cert.pem -noout -serial
Print the certificate subject name:
openssl x509 -in cert.pem -noout -subject
Print the certificate subject name in RFC2253 form:
openssl x509 -in cert.pem -noout -subject -nameopt RFC2253
Print the certificate subject name in oneline form on a terminal supporting UTF8:
openssl x509 -in cert.pem -noout -subject -nameopt oneline,-esc_msb
Print the certificate SHA1 fingerprint:
openssl x509 -sha1 -in cert.pem -noout -fingerprint
Convert a certificate from PEM to DER format:
openssl x509 -in cert.pem -inform PEM -out cert.der -outform DER
Convert a certificate to a certificate request:
openssl x509 -x509toreq -in cert.pem -out req.pem -key key.pem
Convert a certificate request into a self-signed certificate using extensions for a CA:
openssl x509 -req -in careq.pem -extfile openssl.cnf -extensions v3_ca \
-key key.pem -out cacert.pem
Sign a certificate request using the CA certificate above and add user certificate extensions:
openssl x509 -req -in req.pem -extfile openssl.cnf -extensions v3_usr \
-CA cacert.pem -CAkey key.pem -CAcreateserial
Set a certificate to be trusted for SSL client use and change set its alias to "Steve's Class 1 CA"
openssl x509 -in cert.pem -addtrust clientAuth \
-setalias "Steve's Class 1 CA" -out trust.pem
NOTES
The conversion to UTF8 format used with the name options assumes that T61Strings use the ISO8859-1
character set. This is wrong but Netscape and MSIE do this as do many certificates. So although this is
incorrect it is more likely to print the majority of certificates correctly.
The -email option searches the subject name and the subject alternative name extension. Only unique email
addresses will be printed out: it will not print the same address more than once.
BUGS
It is possible to produce invalid certificates or requests by specifying the wrong private key, using
unsuitable X.509 extensions, or using inconsistent options in some cases: these should be checked.
There should be options to explicitly set such things as start and end dates rather than an offset from
the current time.
SEE ALSO
openssl(1), openssl-req(1), openssl-ca(1), openssl-genrsa(1), openssl-gendsa(1), openssl-verify(1),
x509v3_config(5)
HISTORY
The hash algorithm used in the -subject_hash and -issuer_hash options before OpenSSL 1.0.0 was based on
the deprecated MD5 algorithm and the encoding of the distinguished name. In OpenSSL 1.0.0 and later it is
based on a canonical version of the DN using SHA1. This means that any directories using the old form
must have their links rebuilt using openssl-rehash(1) or similar.
The -signkey option has been renamed to -key in OpenSSL 3.0, keeping the old name as an alias.
The -engine option was deprecated in OpenSSL 3.0.
The -C option was removed in OpenSSL 3.0.
COPYRIGHT
Copyright 2000-2023 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance
with the License. You can obtain a copy in the file LICENSE in the source distribution or at
<https://www.openssl.org/source/license.html>.
3.0.13 2025-02-05 OPENSSL-X509(1SSL)