Provided by: mupdf-tools_1.23.10+ds1-1build3_amd64 
NAME
mutool - all purpose tool for dealing with PDF files
SYNOPSIS
mutool <sub-command> [options]
DESCRIPTION
mutool is a tool based on MuPDF for dealing with document files in various manners. There are several
sub commands available, as described below.
DRAW
mutool draw [options] file [pages]
The draw command will render a document to image files, convert to another vector format, or extract the
text content.
The supported input document formats are: pdf, xps, cbz, and epub.
The supported output image formats are: pbm, pgm, ppm, pam, png, pwg, pcl and ps. The supported output
vector formats are: svg, pdf, and debug trace (as xml). The supported output text formats are: plain
text, html, and structured text (as xml).
-p password
Use the specified password if the file is encrypted.
-o output
The output format is inferred from the output filename. Embed %d in the name to indicate the page
number (for example: "page%d.png"). Printf modifiers are supported, for example "%03d". If no
output is specified, the output will go to stdout.
-F format
Enforce a specific output format. Only necessary when outputting to stdout since normally the
output filename is used to infer the output format.
-R angle
Rotate clockwise by given number of degrees.
-r resolution
Render the page at the specified resolution. The default resolution is 72 dpi.
-w width
Render the page at the specified width (or, if the -r flag is used, render with a maximum width).
-h height
Render the page at the specified height (or, if the -r flag is used, render with a maximum
height).
-f Fit exactly; ignore the aspect ratio when matching specified width/heights.
-B bandheight
Render in banded mode with each band no taller than the given height. This uses less memory during
rendering. Only compatible with pam, pgm, ppm, pnm and png output formats. Banded rendering and
md5 checksumming may not be used at the same time.
-W width
Page width in points for EPUB layout.
-H height
Page height in points for EPUB layout.
-S size
Font size in points for EPUB layout.
-U filename
User CSS stylesheet for EPUB layout.
-c colorspace
Render in the specified colorspace. Supported colorspaces are: mono, gray, grayalpha, rgb,
rgbalpha, cmyk, cmykalpha. Some abbreviations are allowed: m, g, ga, rgba, cmyka. The default is
chosen based on the output format.
-G gamma
Apply gamma correction. Some typical values are 0.7 or 1.4 to thin or darken text rendering.
-I Invert colors.
-s [mft5]
Show various bits of information: m for glyph cache and total memory usage, f for page features
such as whether the page is grayscale or color, t for per page rendering times as well statistics,
and 5 for md5 checksums of rendered images that can be used to check if rendering has changed.
-A bits
Specify how many bits of anti-aliasing to use. The default is 8.
-D Disable use of display lists. May cause slowdowns, but should reduce the amount of memory used.
-i Ignore errors.
-L Low memory mode (avoid caching objects by clearing cache after each page).
-P Run interpretation and rendering at the same time.
pages Comma separated list of page numbers and ranges (for example: 1,5,10-15,20-N), where the character
N denotes the last page. If no pages are specified, then all pages will be rendered.
CLEAN
mutool clean [options] input.pdf [output.pdf] [pages]
The clean command pretty prints and rewrites the syntax of a PDF file. It can be used to repair broken
files, expand compressed streams, filter out a range of pages, etc.
If no output file is specified, it will write the cleaned PDF to "out.pdf" in the current directory.
-p password
Use the specified password if the file is encrypted.
-g Garbage collect objects that have no references from other objects. Give the option twice to also
renumber all objects and compact the cross reference table. Give it three times to also merge and
reuse duplicate objects. Give it four times to also merge and reuse duplicate streams.
-s Rewrite content streams.
-d Decompress streams. This will make the output file larger, but provides easy access for reading
and editing the contents with a text editor.
-l Linearize output. Create a "Web Optimized" output file.
-i Toggle decompression of image streams. Use in conjunction with -d to leave images compressed.
-f Toggle decompression of font streams. Use in conjunction with -d to leave fonts compressed.
-a ASCII Hex encode binary streams. Use in conjunction with -d and -i or -f to ensure that although
the images and/or fonts are compressed, the resulting file can still be viewed and edited with a
text editor.
-z Deflate uncompressed streams. If combined with -d, any decompressed streams will be recompressed.
If combined with -a, the streams will also be hex encoded after compression.
pages Comma separated list of page numbers and ranges (for example: 1,5,10-15,20-N), where the character
N denotes the last page. If no pages are specified, then all pages will be included.
EXTRACT
mutool extract [options] file.pdf [object numbers]
The extract command can be used to extract images and font files from a PDF. If no object numbers are
given on the command line, all images and fonts will be extracted.
-p password
Use the specified password if the file is encrypted.
-r Convert images to RGB when extracting them.
INFO
mutool info [options] file.pdf [pages]
The info command lists the resources used on each page in a PDF file. The default is to list all
resource types, but if one or more flags are given, only the flagged types will be shown.
-p password
Use the specified password if the file is encrypted.
-F List fonts.
-I List images.
-M List page dimensions.
-S List shadings.
-P List patterns.
-X List form and postscript XObjects.
pages Comma separated list of page numbers and ranges (for example: 1,5,10-15,20-N), where the character
N denotes the last page. If no pages are specified, then all pages will be included.
CREATE
mutool create [-o output.pdf] [options] page1.txt [page2.txt ...]
The create command creates a new PDF file with the contents created from one or more input files
containing graphics commands.
-o output
If no output file is specified, it will write the created PDF to "out.pdf" in the current
directory.
page.txt
A page is created for each input file, with the contents of the file copied into the content
stream. Special comments in the input files are parsed to define the page dimensions and font and
image resources:
%%MediaBox 0 0 500 800
%%Rotate 90
%%Font Tm Times-Roman
%%Font Fn0 path/to/font/file.ttf
%%Image Im0 path/to/image.png
-O Comma separated list of format specific output options:
decompress
Decompress all object streams.
compress
Compress all object streams.
compress-fonts
Compress object streams for embedded fonts.
compress-images
Compress object streams for images.
ascii
Encode object streams using ASCII hex encoding.
pretty
Pretty-print objects with indentation.
linearize
Optimize document for progressive loading in viewers.
sanitize
Clean up graphics command in content streams.
garbage[=compact|deduplicate]
Garbage collect unused objects. With compact the cross-reference table will also be compacted.
With deduplicate duplicate objects will also be recombined.
PAGES
mutool pages [options] input.pdf [pages ...]
The pages command dumps information about the size and orientation of pages within the document.
-p password
Use the specified password if the file is encrypted.
pages Comma separated list of page numbers and ranges (for example: 1,5,10-15,20-N), where the character
N denotes the last page. If no pages are specified, then all pages will be included.
POSTER
mutool poster [options] input.pdf [output.pdf]
The poster command splits each page into tiles, and puts each tile on a page of its own. It's useful for
printing a large page onto smaller pieces of paper that can then be glued together to create a large
poster.
-p password
Use the specified password if the file is encrypted.
-x factor
Split the page into this many horizontal pieces.
-y factor
Split the page into this many vertical pieces.
The output will have x times y number of pages for each input page.
SHOW
mutool show [options] file.pdf [object numbers ...]
The show command will print the specified objects and streams to stdout. Streams are decoded and non-
printable characters are represented with a period by default.
-p password
Use the specified password if the file is encrypted.
-o file
Write output to file instead of stdout.
-b Print streams as binary data and omit the object header.
-e Print streams in their original encoded (or compressed) form.
Specify objects by number, or use one of the following special names:
'xref' Print the cross reference table.
'trailer'
Print the trailer dictionary.
'encrypt'
Print the encryption dictionary.
'pagetree'
List the object numbers for every page.
'grep' Print all the objects in the file in a compact one-line format suitable for piping to grep.
'outline'
Print the outline (table of contents).
RUN
mutool run script.js [arguments]
Executes a Javascript program which has access to most of the features of the MuPDF library. The command
supports ECMAScript 5 syntax in strict mode. All of the MuPDF constructors and function live in the
global object, and the command line arguments are accessible from the global argv object.
If invoke without any arguments, it will drop you into an interactive REPL (read-eval-print-loop). On the
interactive prompt, if you prefix a line with an equal character it will automatically print the results
of the line.
See the MuPDF documentation for details about the Javascript interfaces.
CONVERT
mutool convert [options] file [pages]
The convert command is used to convert a file from one format to another.
-p password
Use the specified password if the file is encrypted.
-A bits
Specify how many bits of anti-aliasing to use. The default is 8.
-W width
Page width in points for EPUB layout.
-H height
Page height in points for EPUB layout.
-S size
Font size in points for EPUB layout.
-U filename
User CSS stylesheet for EPUB layout.
-o output
The output format is inferred from the output filename. Embed %d in the name to indicate the page
number (for example: "page%d.png"). Printf modifiers are supported, for example "%03d". If no
output is specified, the output will go to stdout.
-F format
Enforce a specific output format. Only necessary when outputting to stdout since normally the
output filename is used to infer the output format.
-O Comma separated list of format specific output options:
MERGE
mutool merge [options] file1 [pages] file2 [pages] ...
The merge command is used to pick out pages from two or more files and merge them in order into a new
output file.
-o output
The output filename.
-O See mutool create for details on this option.
VERSION
mutool -v
Shows the MuPDF version used to build mutool.
SEE ALSO
mupdf(1),
AUTHOR
MuPDF is Copyright 2006-2017 Artifex Software, Inc.
January 12, 2016 MUTOOL(1)