Provided by: multistrap_2.2.11_all 
Name
multistrap - multiple repository bootstraps
Synopsis
multistrap [-a ARCH] [-d DIR] -f CONFIG_FILE
multistrap [--simulate] -f CONFIG_FILE
multistrap -?|-h|--help|--version
Options
-?|-h|--help|--version - output the help text and exit successfully.
--dry-run - collate all the configuration settings and output a bare summary.
--simulate - same as --dry-run
(The following options can also be set in the configuration file.)
-a|--arch - architecture of the packages to put into the multistrap.
-d|--dir - directory into which the bootstrap will be installed.
-f|--file - configuration file for multistrap [required]
-s|--shortcut - shortened version of -f for files in known locations.
--tidy-up - remove apt cache data, downloaded Packages files and the apt package cache. Same as
cleanup=true.
--no-auth - allow the use of unauthenticated repositories. Same as noauth=true
--source-dir DIR - move the contents of var/cache/apt/archives/ from inside the chroot to the specified
external directory, then add the Debian source packages for each used binary. Same as retainsources=DIR
If the specified directory does not exist, nothing is done. Requires --tidy-up in order to calculate the
full list of source packages, including dependencies.
Description
multistrap provides a debootstrap-like method based on apt and extended to provide support for multiple
repositories, using a configuration file to specify the relevant suites, architecture, extra packages and
the mirror to use for each bootstrap.
The aim is to create a complete bootstrap / root filesystem with all packages installed and configured,
instead of just the base system.
In most cases, users will need to create a configuration file for each different multistrap usage.
Example configuration:
[General]
arch=armel
directory=/opt/multistrap/
# same as --tidy-up option if set to true
cleanup=true
# same as --no-auth option if set to true
# keyring packages listed in each bootstrap will
# still be installed.
noauth=false
# extract all downloaded archives (default is true)
unpack=true
# whether to add the /suite to be explicit about where apt
# needs to look for packages. Default is false.
explicitsuite=false
# enable MultiArch for the specified architectures
# default is empty
multiarch=
# aptsources is a list of sections to be used
# the /etc/apt/sources.list.d/multistrap.sources.list
# of the target. Order is not important
aptsources=Debian
# the bootstrap option determines which repository
# is used to calculate the list of Priority: required packages
# and which packages go into the rootfs.
# The order of sections is not important.
bootstrap=Debian
[Debian]
packages=
source=http://ftp.uk.debian.org/debian
keyring=debian-archive-keyring
suite=jessie
This will result in a completely normal bootstrap of Debian Jessie from the specified mirror, for armel
in '/opt/multistrap/'. (This configuration is retained in the package as
/usr/share/multistrap/jessie.conf)
Specify a package to extend the multistrap to include that package and all dependencies of that package.
Specify more repositories for the bootstrap by adding new sections. Section names need to be listed in
the bootstrap general option for the packages to be included in the bootstrap.
Specify which repositories will be available to the final system at boot by listing the section names in
the aptsources general option, e.g. to exclude some internal sources or when using a local mirror when
building the rootfs.
Section names are case-insensitive.
All dependencies are resolved only by apt, using all bootstrap repositories, to use only the most recent
and most suitable dependencies. Note that multistrap turns off Install-Recommends so if the multistrap
needs a package that is only a Recommended dependency, the recommended package needs to be specified in
the packages line explicitly. See "Explicit suite specification" for more information on getting specific
packages from specific suites.
'Architecture' and 'directory' can be overridden on the command line. Some other general options also
have command line options.
Online examples and documentation
"multistrap" supports a range of permutations, see the wiki and the emdebian website for more information
and example configurations:
http://wiki.debian.org/Multistrap
http://www.emdebian.org/multistrap/
"multistrap" includes an example configuration file with a full list of all supported config file
options: /usr/share/doc/multistrap/examples/full.conf
Shortcuts
In a similar manner to "debootstrap", "multistrap" supports referring to configuration files in known
locations by shortcuts. When using the "--shortcut" option, "multistrap" will look for files in
/usr/share/multistrap and then /etc/multistrap.d/, appending a '.conf' suffix to the specified shortcut.
These two commands are equivalent:
$ sudo multistrap -s sid
$ sudo multistrap -f /usr/share/multistrap/sid.conf
Note that "multistrap" will still fail if the configuration file itself does not set the directory or the
architecture.
Repositories
"aptsources" lists the sections which should be used to create the
/etc/apt/sources.list.d/multistrap.list apt sources in the final system. Not all "aptsources" have to
appear in the "bootstrap" section if you have some internal or local sources which are not accessible to
the installed root filesystem.
"bootstrap" lists the sections which will be used to create the multistrap itself. Only packages listed
in "bootstrap" will be downloaded and unpacked by multistrap.
Make sure "bootstrap" lists all sections you need for apt to be able to find all the packages to be
unpacked for the multistrap.
(Older versions of multistrap supported the same option under the "debootstrap" name - this spelling is
still supported but new configuration files should be "bootstrap" instead.
General settings:
'arch' can be overridden on the command line using the "--arch" option.
'directory' specifies the top level directory where the bootstrap will be created - it is not packed into
a .tgz once complete.
'bootstrap' lists the Sections which will be used to specify the packages which will be downloaded (and
optionally unpacked) into the bootstrap.
'aptsources' lists the Sections which will be used to specify the apt sources in the final system, e.g.
if you need to use a local repository to generate the rootfs which will not be available to the device at
runtime, list that section in "bootstrap" but not in "aptsources".
If you want a package to be in the rootfs, it must be specified in the "bootstrap" list under General.
The order of section names in either list is not important.
If "markauto" is set to true, "multistrap" will request apt to mark all packages specified in the
combined "packages" list as manually installed and all dependencies not explicitly listed as
automatically installed in the APT extended state database. "markauto" can be used independently of
"unpack".
As with debootstrap, multistrap will continue after errors, as long as the configuration file can be
correctly parsed.
multistrap also implements the machine:variant support originally used in Emdebian Crush, although in a
different implementation. Using the cascading configuration support, particular machine:variant
combinations can be supported by simple changes on the command line.
Setting "tarballname" to true also packs up the final filesystem into a tarball.
Note that multistrap ignores any unrecognised options in the config file - this allows for backwards-
compatible behaviour as well as overloading the multistrap config files to support other tools (like
pbuilder). Use the "--simulate" option to see the combined configuration settings.
However, if the config file itself cannot be parsed, multistrap will abort. Check that the config file
has a key and a value for each line, other than comments. Values must all on the same line as the key.
Section settings
[Debian]
packages=
source=http://ftp.uk.debian.org/debian
keyring=debian-archive-keyring
suite=jessie
The section name (in [] brackets) needs to be unique for this configuration file and any configuration
files which this file includes. Section names are case insensitive (all comparisons happen after
conversion to lower case).
'packages' is the list of packages to be added when this Section is listed in "bootstrap" - all package
names must be listed on a single line or the file will fail to parse. One alternative is to define your
list of packages as multiple groups with packages separated on a functional / dependency basis, e.g.
base, Xorg, networking etc. and list each group under 'bootstrap'.
bootstrap=base networking
[base]
packages=udev mtd-utils
source=http://http.debian.net/debian
keyring=debian-archive-keyring
suite=jessie
[networking]
packages=netbase ifupdown iproute net-tools samba
source=http://http.debian.net/debian
keyring=debian-archive-keyring
suite=jessie
As a special case, "multistrap" also supports multiple packages keys per section, one line for each.
Other keys cannot be repeated in this manner.
[Emdebian]
packages=udev mtd-utils netbase ifupdown iproute
packages=busybox net-tools samba
source=http://http.debian.net/debian
keyring=debian-archive-keyring
suite=jessie
'source' is the apt source to use for this Section. To use a local source on the same machine, ensure you
use "copy://" not "file://", so that apt is told to copy the packages into the rootfs instead of assuming
it can try to download them later - because that "later" will never actually happen.
'keyring' lists the package which contains the key used by the source listed in this Section. If no
keyring is specified, the "noauth" option must be set to true. See Secure Apt.
'suite' is the suite to use from this source. Note that this should be the suite, not the codename.
Suites change from time to time: (oldstable, stable, testing, sid) The codename (squeeze, wheezy, jessie,
sid) does not change.
Secure Apt
To use authenticated apt repositories, multistrap needs to be able to install an appropriate keyring
package from the existing apt sources outside the multistrap environment into the destination system.
Unfortunately, keyring packages cannot be downloaded from the repositories specified in the multistrap
configuration - this is because "apt" needs the keyring to be updated before being able to use
repositories not previously known.
If relevant packages exist, specify them in the 'keyring' option for each repository. multistrap will
then check that apt has already installed this package so that the repository can be authenticated before
any packages are downloaded from it.
Note that all repositories to be used with multistrap must be authenticated or apt will fail. Similarly,
secure apt can only be disabled for all repositories (by using the --no-auth command line option or
setting the general noauth option in the configuration file), even if only one repository does not have a
suitable keyring available.
The keyring package(s) will also be installed inside the multistrap environment to match the installed
apt sources for the multistrap.
State
multistrap is stateless - if the directory exists, it will simply proceed as normal and apt will try to
pick up where it left off.
Root Filesystem Configuration
multistrap unpacks the downloaded packages but other stages of system configuration are not attempted.
Examples include:
/etc/inittab
/etc/fstab
/etc/hosts
/etc/securetty
/etc/modules
/etc/hostname
/etc/network/interfaces
/etc/init.d
/etc/dhcp3
Any device-specific device nodes will also need to be created using MAKEDEV or "device-table.pl" - a
helper script that can work around some of the issues with MAKEDEV. device-table.pl requires a device
table file along the lines of the one in the mtd-utils source package. See
/usr/share/doc/multistrap/examples/device_table.txt
Once multistrap has successfully created the basic file and directory layout, other device-specific
scripts are needed before the filesystem can be packaged up and installed onto the target device.
Once installed, the packages themselves need to be configured using the package maintainer scripts and
"dpkg --configure -a", unless this is a native multistrap.
For "dpkg" to work, /proc and /sysfs must be mounted (or mountable), /dev/pts is also recommended.
See also: http://wiki.debian.org/Multistrap
Environment
To configure the unpacked packages (whether in native or cross mode), certain environment variables are
needed:
Debconf needs to be told to accept that user interaction is not desired:
DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true
Perl needs to be told to accept that no locales are available inside the chroot and not to complain:
LC_ALL=C LANGUAGE=C LANG=C
Then, dpkg can configure the packages:
chroot method (PATH = top directory of chroot):
DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true \
LC_ALL=C LANGUAGE=C LANG=C chroot /PATH/ dpkg --configure -a
at a login shell:
# export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true
# export LC_ALL=C LANGUAGE=C LANG=C
# dpkg --configure -a
(As above, dpkg needs /proc and /sysfs mounted first.)
Native mode - multistrap
multistrap was not intended for native support, it was developed for cross architecture support. In order
for multiple repositories to be used, multistrap only unpacks the packages selected by apt.
In native mode, various post-multistrap operations are likely to be needed that debootstrap would do for
you:
1. copy /etc/hosts into the chroot
2. clean the environment to unset LANGUAGE, LC_ALL and LANG
to silence nuisance perl warnings that obscure other errors
(An alternative to unset the localisation variables is to add locales to your multistrap configuration
file in the 'packages' option.
A native multistrap can be used directly with chroot, so "multistrap" runs "dpkg --configure -a" at the
end of the multistrap process, unless the ignorenativearch option is set to true in the General section
of the configuration file.
Daemons in chroots
Depending on which system you using to provide the packages for "multistrap", native chroots should
generally not allow daemons to start inside the chroot. Use the /usr/share/multistrap/chroot.sh as your
"setupscript" or include that script in your own setup script.
setupscript=/usr/share/multistrap/chroot.sh
chroot.sh copes with systems using sysvinit and upstart.
See also
http://people.debian.org/~hmh/invokerc.d-policyrc.d-specification.txt
Cascading configuration
To support multiple variants of a basic (common) configuration, "multistrap" allows configuration files
to include other (more general) configuration files. i.e. the most detailed / specific configuration file
is specified on the command line and that file includes another file which is shared by other
configurations.
Base file:
/usr/share/multistrap/crosschroot.conf
Variations:
/usr/share/multistrap/armel.conf
Specifying just the armel.conf file will get the rest of the settings from crosschroot.conf so that
common changes only need to be made in a single file.
It is strongly recommended that any changes to the configuration files involved in any particular cascade
are tested using the "--simulate" option to multistrap which will output a summary of the options that
have been set once the cascade is complete. Note that multistrap does not warn you if a configuration
file contains an unrecognised option (for future compatibility with backported configurations), so a
simple typo can result in an option not being set.
Machine:variant support
The old packages.conf variables from emsandbox can all be converted into "multistrap" configuration
variables. The machine:variant support in "multistrap" concentrates on the scripts, config.sh and
setup.sh
Note: machine:variant support is likely to be replaced by the hook functionality described below.
Once "multistrap" has unpacked the downloaded packages, the "setup.sh" can be called, passing the
location and architecture of the root filesystem, so that other fine tuning can take place. At this
stage, any operations inside a foreign architecture rootfs must not try to execute any binaries within
the rootfs. As the final stage of the multistrap process, "config.sh" is copied into the root directory
of the rootfs.
One advantage of using machine:variant support is that the entire rootfilesystem can be managed by a
single call to multistrap - this is useful when building root filesystems in userspace.
To enable machine:variant support, specify the path to the scripts to be called in the variant
configuration file (General section):
[General]
include=/path/to/general.conf
setupscript=/path/to/setup.sh
configscript=/path/to/config.sh
Ensure that both the setupscript and the configscript are executable or "multistrap" will ignore the
script.
Example configscript.sh
#!/bin/sh
set -e
export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true
export LC_ALL=C LANGUAGE=C LANG=C
/var/lib/dpkg/info/dash.preinst install
dpkg --configure -a
mount proc -t proc /proc
dpkg --configure -a
umount /proc
For more information, see the Wiki: http://wiki.debian.org/Multistrap
Mounting /dev and /proc for chroot configuration
/proc can be mounted inside the chroot, as above:
mount proc -t proc /proc
However, /dev should be mounted from outside the chroot, before running any "configscript.sh" in the
chroot:
cd /path/chroot/
sudo tar -xzf /path/multistrap.tgz
sudo mount /dev -o bind ./dev/
sudo chroot . ./configscript.sh || true
Restricting package selection
"multistrap" includes Required packages by default, the current list of packages on your own machine can
be seen using:
grep-available -FPriority 'required' -sPackage
(The actual list is calculated from the downloaded Packages files and may differ from the output of
"grep-available".)
If the OmitRequired option is set to true, these packages will not be added - whilst useful, this option
can easily lead to a useless rootfs. Only the packages specified manually in the configuration files will
be used in the calculations - dependencies of those packages will be added but no others.
Adding Priority: important packages
"multistrap" can imitate "debootstrap" by automatically adding all packages from all sections where the
downloaded Packages file lists the package as Priority: important. The default is not to add such
packages unless individually included in a "packages=" option in a section specified in the "bootstrap"
general option. To add all such packages, set the addimportant option to true in the general section.
addimportant=true
Priority: important can only operate for all sections listed in the "bootstrap" option. This may cause
some confusion when mixing suites.
It is not possible to enable addimportant and omitrequired in the same configuration. "multistrap" will
exit with error code 7 if any configuration results in addimportant and omitrequired both being set to
true. (This includes the effects of including other configuration files.)
Recommends behaviour
The Debian default behaviour after the Lenny release was to consider recommended packages as extra
packages to be installed when any one package is selected. Recommended packages are those which the
maintainer considers that would be present on "most" installations of that package and allowing
Recommends means allowing Recommends of recommended packages and so on.
The multistrap default is to turn recommends OFF.
Set the allowrecommends option to true in the General section to use typical Debian behaviour.
Default release
"multistrap" supports an option to explicitly set the default release to use with apt:
"aptdefaultrelease". This determines which release apt will use for the base system packages and is not
the same as pinning (which relates to the use of apt after installation). Multistrap sets the default-
release to the wildcard * unless a release is named in the "aptdefaultrelease" field. Any release
specified here must also be defined in a stanza referenced in the bootstrap list or apt will fail.
To install a specific version of a package from a newer release than the one specified as default,
"explicitsuite" must also be set to true if the package exists at any version in the default release.
Also, any packages upon which that package has a strict dependency (i.e. = rather than >=) must also be
explicitly added to the packages line in the stanza for the desired version, even though that package
does not need to be listed to get it from the default release. This is typical apt behaviour and is not a
bug in multistrap.
The combination of default release, explicit suite and apt preferences can quickly become complex and
bugs can be very hard to identify. "multistrap" always outputs the complete apt command line, so test
this command yourself (using the files written out by "multistrap") to see what is going on. Remember
that all dependency resolution and all the logic to determine which version of a specific package gets
installed in your "multistrap" chroot is entirely down to apt and all "multistrap" can do is pass files
and command line options to apt.
See also: apt preferences.
Explicit suite specification
Sometimes, apt needs to be told to get a particular package from a particular suite, ignoring a more
recent version in another suite in the same set of sources.
"multistrap" can operate with and without the explicit suite option, the default is to let apt use the
most recent version from the collection of specified bootstrap sources.
Explicit suite specification has no effect on the final installed system - if your aptsources includes a
repository which in turn includes a newer version of the package(s) specified explicitly, the next
"apt-get upgrade" on the device will bring in the newer version.
Also, when specifying packages to get from a specific suite, apt will also try and ensure that the
dependencies for that package are also from the same suite and this can cause apt to be unable to resolve
the complete set of dependencies. In this situation, being explicit about one package selection may
require being explicit about some (not necessarily all) of the dependencies of that package as well.
When using explicitsuite, take care in using stable-proposed-updates or other temporary locations - if
the package migrates into another suite and is removed from the temporary suite (as with
*-proposed-updates), multistrap will not be able to find the package.
Explicit suite handling can be very hard to get right. In general, it is best to create a small bootstrap
chroot of your native arch, then chroot into it, add the relevant apt sources and work out exactly what
commands are necessary to get the correct mix of packages. Avoid specifying explicit versions to sort out
problems, work with suites only. Apt preferences / pinning may be useful here, see Apt preferences.
Apt preferences
If a suitable file is listed in the aptpreferences option of the General section of the configuration
file, this file will be copied into the apt preferences directory of the bootstrap before apt is first
used.
When an apt preferences file is provided, the "Default-Release" behaviour of "multistrap" is disabled.
As with other external scripts and files, the content of the apt preferences file is beyond the scope of
this manpage. "multistrap" does not try to verify the supplied file other than ensuring that it can be
read.
Omitting deb-src listings
Some multistrap environments do not need access to the Debian sources of packages being installed,
typically this is required when preparing a build (or cross-build) chroot using multistrap.
To turn off this additional source (and save both download time and apt-cache size), use the omitdebsrc
field in each Section.
[Baked]
packages=
source=http://www.emdebian.org/baked
keyring=emdebian-archive-keyring
suite=testing
omitdebsrc=true
omitdebsrc is necessary when using packages from debian-ports where packages do not have sources, except
"unreleased".
fakeroot
Foreign architecture bootstraps can operate under "fakeroot" ("multistrap" is designed to do as much as
it can within a single call to make this easier) but the configuration stage which normally happens with
a native architecture bootstrap requires "chroot" and "chroot" itself will not operate under "fakeroot".
Therefore, if "multistrap" detects that "fakeroot" is in use, native mode configuration is skipped with a
reminder warning.
The same problem applies to "apt-get install" and therefore the installation of the keyring package on
the host system is also skipped if fakeroot is detected.
Handling problematic packages
Sometimes, a particular package will fail to even unpack properly if other packages have not already been
unpacked. This can happen if dpkg diversions are not setup correctly or if the package Pre-Depends on an
executable in another package.
Multistrap offers two ways to handle these problems. A package can be listed as "reinstall" or as
"additional". Each section in the "multistrap" configuration file can have a single "reinstall" or
"additional" listing or both.
Reinstall means that the package will be downloaded and unpacked as normal - alongside all the other
packages, but will then be reinstalled at the end by running the "preinst" maintainer script with the
"upgrade" argument. "dpkg" will then continue the rest of the configuration of that package.
Additional adds a second round of "apt-get install" to the multistrap process - after the initial
unpacking. The additional package will then be downloaded and unpacked. If running natively, the
additional package is downloaded, unpacked and configured after all the rest of the packages have been
downloaded, unpacked and configured.
Neither "reinstall" nor "additional" should be seen as more than just workarounds and wishlist bugs
should be filed in Debian against packages which require the use of these mechanisms (or the packages
which would prevent the particular package from operating normally).
Debconf preseeding
Adding a debconf seed can help in configuring packages to a particular setting instead of the package
default when running the configuration non-interactively. See
http://www.debian-administration.org/articles/394 for information on how to create seed files.
Multiple seed files can be specified using the debconfseed field in the [General] section, separated by
spaces:
debconfseed=seed1 seed2
Files which do not exist or which cannot be opened will be silently ignored. Check the results of the
parsing using the "--simulate" option to "multistrap". The preseeding files will be copied to a preseed
directory in /tmp inside the rootfs.
To use the preseeding, add a section to the configscript.sh, prior to any calls to dpkg --configure -a.
e.g. :
#!/bin/sh
set -e
export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true
export LC_ALL=C LANGUAGE=C LANG=C
if [ -d /tmp/preseeds/ ]; then
for file in `ls -1 /tmp/preseeds/*`; do
debconf-set-selections $file
done
fi
dpkg --configure -a
Hooks
If a hook directory (hookdir=) is specified in the General section of the "multistrap" configuration
file, the hook scripts which are executable will be run from outside the multistrap directory at the
following stages:
download hooks
Executed before unpacking is started, immediately after the packages have been downloaded. Download
hooks are executable scripts in the specified hook directory with a filename beginning with download.
native hooks
Native hook scripts are executed only in native mode, immediately before starting the configuration of
the downloaded packages and again upon completion of the package configuration. Native hooks will be
called the absolute path and the current progress state, start or end.
Native scripts are executable scripts in the specified hook directory with a filename beginning with
native.
completion hooks
Executed immediately before the tarball is created or "multistrap" exits if not configured to create a
tarball.
Completion scripts are executable scripts in the specified hook directory with a filename beginning with
completion.
Hooks are passed the absolute path to the directory which will be the top level directory of the chroot
or multistrap system. Hooks which cannot be resolved using realpath or which are not executable will be
ignored.
All hooks of one type are sorted into alphabetical order before being run.
Note that "multistrap" does not rollback the effects of hooks in the case of errors. However,
"multistrap" will report the accumulated errors as warnings. If a hook exits non-zero, the exit value is
converted to a positive number and added to the total warning count, reported at the end of the
operation.
Output
"multistrap" can produce a lot of output - informational messages appear on STDOUT, errors and warnings
on STDERR. Calls to "apt" and "dpkg" respect the same pattern, so it is simple to trim the combined
"multistrap" output to just the errors, if desired.
"multistrap" accumulates error states from non-fatal processes within the operation and reports these as
warnings on STDERR as well as exiting with the accumulated error count. This includes hooks which report
non-zero exit values.
Bugs
As "multistrap" gets more complex, bugs will creep into the package. Please report all bugs to the
Debian BTS using the "reportbug" tool and please attach all configuration files. If your configuration
needs to access local or private apt repositories, please check your configuration with the latest
version of "multistrap" in Debian using the "--simulate" option and include that report in your bug
report.
The "--simulate" option output is regularly expanded to help users debug problems in the configuration
files.
Please also check (and update) the Multistrap wiki at http://wiki.debian.org/Multistrap and the
Multistrap webpage content at http://www.emdebian.org/multistrap/ before filing bugs. Various people on
the debian-embedded@lists.debian.org mailing list and #emdebian IRC channel on irc.oftc.net can also help
if your config file does not parse correctly. You would need to put the "--simulate" output on a pastebin
website and put the URL in your message.
MultiArch support
Multiarch support is experimental - please report issues and file bugs with full details of your setup,
the full multistrap config file and the errors reported.
"multistrap" overrides the existing multiarch support of the external system so that a MultiArch aware
system can still create a non-MultiArch chroot from repositories which do not support all of the
architectures supported by the external dpkg.
If multiarch is enabled within the multistrap chroot, "multistrap" writes out the list into
/var/lib/dpkg/arch inside the chroot.
For multiple architectures, specify the option once and use a space separated list for the architecture
list. Ensure you include what will be the host architecture of the chroot.
See also http://wiki.debian.org/Multiarch/
[General]
...
multiarch=i386 armel armhf
Each Section will install packages from the base architecture unless the "Architecture" option is
specified for particular sections.
[Foreign]
packages=libgcc1 libc6
architecture=armel
source=http://ftp.uk.debian.org/debian
keyring=debian-archive-keyring
suite=sid
In the "--simulate" output, the architecture(s) specified in the MultiArch option will be listed under
the "Foreign architectures" listing. Packages for a specific architecture will be listed as the package
name followed by a colon followed by the architecture.
libgcc1:armel libc6:armel
perl v5.30.0 2020-03-22 MULTISTRAP(1)