Ubuntu Manpage: makepp_rules -- How to tell makepp to build something

NAME

       makepp_rules -- How to tell makepp to build something

DESCRIPTION

?: &,
-,
@, B: :build_cache,
:build_check, D: :dispatch, E: :env, I: "ignore_error",
:include, L: :last_chance, M: makeperl, N: "noecho", P: :parser,
"perl", S: :signature

A rule is what tells makepp how to build a file or a class of files. Makepp supports the same rule
syntax as other implementations of make, plus some additions of its own.

A rule has the general format

target_expression : dependency_expression [ : optional arguments]
actions

The list of targets may not contain any automatic variables (except "$(foreach)"). The dependency list
may contain only automatic variables referring to the target (i.e., "$(output)", "$(outputs)", or their
synonyms). The action may contain any automatic variables.

If makepp decides that the rule needs to be executed, each line of the rule is executed sequentially, and
if any returns a non-zero status, the remainder are not executed (and makepp aborts with an error unless
you specified the "-k" option on the command line.) Each action should be only one line. If an action
is too long to write conveniently on a single line, you can split it into several lines and put a
backslash to indicate that the several lines should be combined into one.

In order to distinguish actions from the next rule, the action should be indented more than the line
containing the targets and dependencies. Unlike other implementations of make, makepp doesn't really
care how much you indent it or whether you use tab characters rather than spaces. To keep backward
compatibility with traditional make, the rules makepp uses to decide when actions end and the next rule
begins are somewhat complicated:

• The first action line must be indented more than the line containing the target.

• If a line is indented by one tab character or 8 spaces or more, then it is considered an action line.

• A blank line or a comment line with the "#" character at the right margin ends the rule, unless the
next non-blank line is indented more than 8 spaces (or more than one tab).

• If a line is indented as much or more than the first action line, then it is considered an additional
action line.

There are a few special action items:

& This symbol shall be followed by a command name and any number of arguments. Shell syntax is not
understood fully here, only single and double quotes and backslashed characters within, as throughout
makepp. The command name either leads to a function "c_name" to be called with the remaining strings
as arguments. If such a function can not be found, this is identical to calling "run" from a "perl"
block.

This allows efficiently calling a built-in, makefile-provided or external command. The prefix "&"
has been chosen because it is the function invoker in Perl, and because at the beginning it is
illegal in Shell.

$(ROOT)/include/%.h: %.h
&ln $(input) $(output)

noecho
@ Normally, each shell command is printed as it is executed. However, if the first word of the action
is "noecho" (or if it begins with the character "@"), then the command is not printed. For example,

%.o: %.cxx
noecho $(LIBTOOL) --mode=compile $(CC) -c $(input)

This means that when the libtool command is executed, it is not printed. (Libtool itself usually
prints the modified command that it executes, so it's redundant to print it twice.)

ignore_error
- Normally, if the shell command returns a non-zero status, then makepp aborts because the command
failed. However, some programs incorrectly set the status on exit, or there may be an error which
really isn't fatal and shouldn't abort the whole compilation. You can cause makepp to ignore the
return status by specifying "ignore_error" as the first word of the command line (or "-" as the first
character). For example,

$(phony distribution):
ignore_error rm -r my_program-$(VERSION) # Get rid of previous junk.
&mkdir my_program-$(VERSION)
&cp $(FILES) my_program-$(VERSION)
tar cf my_program-$(VERSION).tar my_program-$(VERSION)

This command makes a directory, copies a bunch of files into it, and then puts everything into a tar
file for distribution. It's a good idea to clean out the previous contents of the directory, if
there was anything there previously, and that's what the first line does. The "rm" might fail, but
its return status is ignored.

perl
makeperl
This is essentially the same as the perl statement, but it is performed each time when running the
rule, not when reading the makefile. The first variant is plain Perl code, while the second variant
first passes the statement through Make-style variable expansion.

For the two possibilities of putting the braces of the body, see the explanation at "perl_perlcode"
in makepp_statements. Note that the third variant explained there makes no sence here, because all
action lines must be indented. You must signal failure in Perl statements, by calling "die".

Per rule the Perl statements are currently evaluated in a common subprocess, except on Windows. That
means they have only read access to any makefile variables. It is also the process which executes
non-Perl actions. So calling exec or exit will confuse makepp. But this may change in the future.
For an efficient way to call Perl scripts, see the previous item "&" or "run".

$(phony version):
noecho perl {{ # $(target) & $(VERSION) from Perl:
print "This is ".f_target()." $VERSION\n";
}}
echo You can mix this with Shell commands
-makeperl { print "This is $(target) $(VERSION)\n" }

There are several different kinds of rules, each with different purposes.

Explicit Rules
target1 target2: dependency1 dependency2 ...
actions to be performed

This syntax specifies that in order to make either target1 or target2, all the files dependency1,
dependency2, etc., must already have been made. Then the given actions are executed by the shell to make
the targets.

The first explicit rule in a file is the default target, and is made if you do not specify any targets on
the command line.

Unlike traditional make programs, makepp usually assumes that one invocation of the action makes all of
the targets (unless there are no dependencies). For example, one invocation of yacc creates both output
files for this rule:

y.tab.c y.tab.h : parser.y
$(YACC) -d parser.y

Note that other implementations of make do not have a concept of a single command producing multiple
output files, and so when you specify multiple targets they will execute the rule once per target.
Makepp will revert to this behavior if it looks like this is an old-style makefile. Specifically, it
will execute the rule once per target, instead of just once overall, if all of the following are true:

• The rule action mentions the automatic variable $@. (The synonyms "$(output)" or "$(target)" do not
trigger this behavior.)

• The rule action does not mention the automatic variable "$(outputs)" (or its synonym "$(targets)").

• This is not a pattern rule, and there is no foreach clause.

For example,

all test install:
for subdir in $(SUBDIRS); do cd $$subdir && $(MAKE) $@; cd ..; done

is a common idiom in makefiles, and makepp supports it. (Note that you should never use recursive make
in any new makefiles you write--use the "load_makefile" statement, or implicit makefile loading instead.)

If you want to have the same rule executed once for each target (e.g., because the targets have similar
commands), it's preferable to use either a pattern rule (see below) or a "foreach" clause. For example,
if with a traditional make program you would write:

a b c d:
do_something to build $@ > $@

in makepp, you would probably want to write it like this:

$(foreach) : : foreach a b c d
do_something to build $(output) > $(output)

Phony targets

A phony target is a target that will never actually exist in the file system; it's just a way of getting
makepp to build some targets and possibly execute some additional commands.

A typical phony target is "all", which usually is used to cause everything that can be built to be built,
like this:

all: prog1 prog2 subdir/prog3 subdir2/libmine.a
@&echo "All done!"

If you type "makepp all", or if you put all as the first explicit target in your makefile (which is
typical) and just type "makepp", then it will cause all the dependencies to be built, then it will print
"All done!". At this point, makepp will look for the file ./all and will discover that it doesn't exist.
It will complain loudly.

To keep makepp from expecting the file ./all to exit, you need to tell it that it's a phony target. Just
put a line like the following in your makefile (it makes no difference where):

.PHONY: all

An equivalent alternative which is sometimes more convenient is to use the "$(phony )" function, like
this:

$(phony all): prog1 prog2 subdir/prog3 subdir2/libmine.a

Phony targets in one makefile can refer to phony targets in another makefile. This is often done with
the "clean" target, like this:

# Top level makefile:
# lots of rules and stuff here
# ....
$(phony clean): subdir1/clean subdir2/clean
&rm -fm my_program

Then in the subdirectories, the makefiles might read like this:

# Makefile in a subdirectory
# ...
$(phony clean):
&rm -fm $(wildcard *.o *.a)

But nowadays you would use the "makeppclean" command, instead of a clean target.

Wildcards

It is safe to specify wildcards in the dependency list. Wildcards match not only files that exist, but
files which can be created given the rules in the makefile. For example, to build a library from all .o
files in a directory, you could write this:

libmine.a: *.o
&rm -f $(output)
ar cr $(output) $(inputs)

This will work even if none of the ".o" files have been created yet, because makepp's wildcards match
files which do not yet exist but can be built. This will even pick up files whose rule is discovered
later (in the same makefile, or one not yet read). In this last point it differs from the "wildcard"
function, which is limited to the known rules, as it must return its result when it is expanded.

Makepp supports all the usual shell wildcards ("*", "?", and "[]"). It also has a wildcard "**" which
matches any number of intervening directories. (This idea was stolen from zsh.) For example, "**/*.c"
matches all the .c files in the entire source tree. "objects/**/*.o" matches all the .o files contained
anywhere in the subdirectory objects or any of its subdirectories or any of their subdirectories. The
"**" wildcard will not follow soft links to directories at any level. It also will never return phony
targets.

Makepp's wildcards will ignore files or directories which exist but cannot be read. After all, such
files cannot be used in the build process anyway. Putting unreadable files in a directory is primarily
useful to inhibit the automatic import of the given file from a repository.

The initial assertion was that this is safe. This is in the sence that it works whether the files
already exist, or need to be built first. However it is unsafe in the sence that it will still match
files that were built by makepp, but no longer have a rule (e.g. you removed the .c file, but the .o file
is still there.) To prevent this, use the "--rm-stale" option.

Pattern rules
A pattern rule is a rule that is applied based on some textual pattern. This is used to apply the same
rule to a whole class of files. The syntax is the same as GNU make's pattern rules:

%.o: %.c
$(CC) -c $(input) -o $(output)

This says that any file in the current directory which matches "*.c" can be converted into the
corresponding .o file using the given command.

Note that several pattern dependencies may be supplied. For example, if your xyz.o file depends on the
corresponding xyz.cpp file, and also on a file called moc_xyz.cflags which contains the compiler options,
this could be expressed with:

%.o: %.cpp %.cflags
$(CXX) `cat $(stem).cflags` -c $(inputs) -o $(output)

You may also have several pattern targets. For example,

%.tab.h %.tab.c : %.y
yacc -d $(input)
&mv y.tab.h $(stem).tab.h
&mv y.tab.c $(stem).tab.c

Ordinarily, pattern rules only look for files in the current directories. You can force them to search
in the current directory and all directories beneath it by setting

makepp_percent_subdirs := 1

before the first pattern rule in your makefile or on the command line for example.

There is a clear difference between "%" and the wildcard "*", though both match any string: The wildcard
returns a list of files that is completely used at that point. So this depends on all .o files buildable
here:

prog: *.o
$(LD) $(LDFLAGS) $(inputs) -o $(output)

This could not be achieved by replacing "*" with "%", because the latter is for one-by-one matching of
input to output, producing internally one rule for each matched stem.

Static pattern rules
A static pattern rule is a pattern rule that is applied only to a limited set of files:

$(SPECIAL_MODULES).o : %.o : %.cpp
$(CXX) -c $(input) -o $(output)

This says that the pattern rule applies only to the files in "$(SPECIAL_MODULES).o".

This is mostly for compatibility with GNU make; foreach rules (see below) are a more powerful way of
doing the same thing.

Foreach rules
The above pattern rule syntax is powerful enough to support almost all builds, but occasionally it is
necessary to do something more complicated. Makepp provides a more powerful syntax: the ":foreach"
clause for the rule.

target_expression : dependency_expression : foreach file-list
actions

The simplest kind of foreach rule is just a pattern rule whose application is restricted to a specific
list of files. For example, suppose you have a pattern rule that tells makepp how to compile all .c
files. However, you have a list of .c files for which you want to do something different. You could do
something like this:

# Here's the rule that applies to everything:
%.o : %.c
$(CC) $(CFLAGS) -c $(input) -o $(output)

%.o : %.c : foreach $(SPECIAL_MODULES)
$(CC) $(SPECIAL_CFLAGS) -c $(input) -o $(output)

An even more powerful use of foreach rules takes advantage of the fact that the variable "$(foreach)" is
set in turn to each file matching the file list and the target and dependency expressions are evaluated.
The file-list may contain wildcards, and these match even files which don't exist yet but which can be
built (see "Wildcards" in makepp_rules).

This is an unwieldy syntax but it is extremely flexible, because the "$(foreach)" variable may appear in
any way in the expression. First, note that pattern rules are in fact a special case of foreach rules;
the pattern rule

%.o : %.c
$(CC) $(CFLAGS) -c $(input) -o $(output)

is exactly equivalent to:

$(patsubst %.c, %.o, $(foreach)) : $(foreach) : foreach *.c
$(CC) $(CFLAGS) -c $(input) -o $(output)

(In fact, it's converted to approximately that internally.)

As an example of how you would use a ":foreach" clause where a pattern rule isn't sufficient, suppose you
have some .c files which are built using some kind of preprocessor which takes as input files with a .k
extension. You want to compile those .c files with a different set of compilation options than the usual
.c files which are ordinary source files. You could do something like this:

# Rule for ordinary .c files:
%.o : %.c
$(CC) $(CFLAGS) -c $(input) -o $(output)

# Rule to make .c files from .k files:
%.c : %.k
$(preprocessor) $(input) > $(output)

# Special build rules for .c files which are made from .k files:
$(foreach:%.k=%.o) : $(foreach:%.c=%.k) : foreach *.k
$(CC) $(SPECIAL_CFLAGS) -c $(input) -o $(output)

(This uses the slightly more concise substitution reference syntax rather than calling "patsubst"
explicitly.)

Note that if all you want to do is to change the value of a variable ("CFLAGS" in this case) it's
sometimes more convenient to use target-specific variables.

Legacy suffix rules
For backward compatibility, makepp supports the old-style suffix rules.

.suffix1.suffix2:
actions

is equivalent to

%.suffix2: %.suffix1
actions

but much harder to remember. (Which suffix comes first?) Typically, a rule will appear in a legacy
makefile like this:

.c.o:
$(CC) $(CFLAGS) -c $*.c -o $*.o

which is exactly equivalent to

%.o : %.c
$(CC) $(CFLAGS) -c $(input) -o $(output)

Conflicting rules
When there is more than one way to make a file, makepp uses a simple procedure to determine which rule to
use.

• It is an error to have conflicting explicit rules for building a file.

• Pattern rules and foreach rules with wildcards never override explicit rules. Thus explicit rules
can be used to specify exceptions for pattern rules. (Note that simply using a ":foreach" clause
doesn't make something a pattern rule. It must have a wildcard (like "*" or "?") as part of the
filename in the ":foreach" clause. If it is just an explicit list of files, it is treated as an
explicit rule for each of those files.)

• When conflicting pattern rules come from different makefiles, rules from "nearer" makefiles override
rules from "farther" makefiles. "Nearer" means that the makefile is located closer to the target in
the directory hierarchy (i.e., the file name of the target relative to the directory the makefile is
run from is shorter). If this doesn't distinguish the makefiles, then the rule from the makefile
which is loaded latest is used.

This means that you can specify a pattern rule that applies to all files in your entire directory
tree in just the top-level makefile, but then you can override it in a lower-level makefile. For
example, your top-level makefile could contain:

%.o : %.c : foreach **/*.c
$(CC) $(CFLAGS) -c $(input) -o $(output)

and you could have a makefile in one of the subdirectories that says:

%.o : %.c
$(CC) $(SPECIAL_CFLAGS) -c $(input) -o $(output)

• Pattern rules that have a shorter chain of inference are preferred over other pattern rules. For
example, if you had the following rules (based on an example from the Linux kernel):

%.s: %.c
$(CC) -s $(input) -o $(output)

%.o: %.s
$(AS) $(input) -o $(output)

%.o: %.c
$(CC) -c $(input) -o $(output)

If we need to build "xyz.o", we could either build the intermediate ".s" file and then run that
through the assembler using the first two rules, or we could go directly to a ".o" file using the
last rule. The last rule is preferred because there are fewer steps in the chain of inference (one
instead of two).

• Pattern rules later in a makefile override pattern rules that are earlier. (This is backwards from
GNU make.) This means that you should put your more general rules earlier, and your more specific
rules later. For example,

%.o: %.c # General compilation rule.
action

special_%.o: special_%.c # Special rule for files with a
different action # "special_" prefix.

Rule options
Sometimes it is necessary to supply additional options to modify how makepp executes the rule. These
options are specified as ":optionname value", either on the line containing the dependencies, or on the
next line.

Supplying the options on separate lines may make it possible for you to use the same makefile with makepp
and a traditional make. For example,

target : dependencies
: signature target_newer
actions

will work fine with a traditional Unix make, because it interprets the ": signature" line as a shell
command, and a command beginning with a colon does nothing.

:build_cache /path/to/build/cache
target : dependencies
: build_cache /put/cache/files/over/there
actions

Specifies the path to a build cache to be used for files produced by this rule. This overrides the
effect of the "build_cache" statement or the "--build-cache" command line option, if any, for this
rule. See makepp_build_cache for details about build caches.

If you specify "none" instead of a path, you disable the build cache for this particular rule. This
can be useful to avoid wasting disk space on files that you know aren't useful to cache, either
because you are very sure they will never be reused or because they are built so fast that it's not
worth caching them.

:build_check build_check_method
target : dependencies
: build_check target_newer
actions

This tells makepp what algorithm to use to decide if the targets need to be rebuilt. See
makepp_build_check for more details. This overrides the effect of the "build_check" statement or the
"--build-check-method" command line option, if any, for this rule.

:env VARIABLE ...
Add a dependency on the values of the named environment variables. If any of them differ from the
previous build, then the targets are considered out of date, if the build_check method so dictates.
(All of the built-in build check methods except for target_newer respect this.)

VARIABLE may be of the form "filename in PATH_VARIABLE" (in quotes), in which case the targets are
considered out of date if the first directory from the colon-delimited value of PATH_VARIABLE in
which filename exists is different from the last build. This can be used to avoid rebuilding the
targets when PATH_VARIABLE changes in an irrelevant way.

:dispatch command ...
Enclose each shell action (but not Perl actions nor Perl commands) in a "sh -c '...'" and prefix it
with command, but assume that the target doesn't depend on command. This is useful if you want to
send actions to a job queuing system, but the result is assumed to be independent of the queuing
parameters, as well as to whether the queuing system is used at all.

:include file_or_pattern
Rule varies depending on compiler:

%.o : %.c
: include %.d : signature C
gcc -MD -c ...

%.o : %.c
: include %.u : signature C # IBM uses a different suffix
xlc -M -c ...

sub dependify { # Turn Microsoft's chatter into useful format
s/\$/\$\$/g;
s/(Note: including file: *)?(.+?)\r?\n/$1 ? "'$2' " : "'".f_output()."': "/e;
}
%.o : %.c
: include %.d : signature C
cl -showIncludes -c ... >$(stem).d
&sed &dependify -o +<$(stem).d

Some compilers (Intel's icc just like gcc above, or IBM's xlc) can produce dependency files on the
fly. That is, while they compile, they write a makefile that makepp can include. The advantage over
makepp's scanner is that it is guaranteed to be 100% correct, where we may only come close.

This option harnesses that in a special way: If the file is not present, i.e. typically on the 1st
build, normal scanning occurs. But if the file is present, no scanning occurs (which is why we
specify a smart signature above -- not scanning falls back to the dumb default of timestamp and
size). Instead it includes the file, before executing the rule. After successfully executing the
rule, it forgets whatever it read the first time, given that the file might have been outdated.
Instead it reads the file again, if it changed, for having up-to-date build info.

WARNING: This is inherently unreliable. The dependency file gets produced by the very rule for which
it is a dependency. On the other hand, the compiler knows about all it's internal sub-includes,
which makepp usually ignores. This is a reliability advantage only for the case where a compiler
patch fixes only the sub-includes. The price is that makepp ends up looking at many more files,
which takes time.

There is a catch when you remove an "#include" statement and the corresponding file: It will still be
mentioned in the dependency file from the last time, when it was needed. In such a case you must
edit the dependency file to remove the dependency which is no longer fulfillable.

This feature can not be used with a build cache because fetching a file from there requires knowing
everything about the file. But a dependency file depends on those files makepp learns about by
reading it. Such a circular dependency is not normally possible in a reliable build system. This is
an exception because after rebuilding and rereading a dependency file everything is correct again.

If you build in your repositories, makepp will pick up the dependency file from the 1st repository
which contains one. This is unlike other files, where it takes the 1st with the expected signature.
This is better than for build caches, where for lack of signature, it can't even find the file.

:last_chance
Enable an open-ended rule, such as

%.foo foo%.bar: :last_chance
&echo $@ -o $@
&cp $(outputs)

Because a rule such as this could generate an essentially infinite number of targets, a target of
this rule will not match a $(wildcard) function or pattern rule unless something else has already
instanced the rule by referencing the target specifically. Furthermore, if "--rm-stale" is
specified, then a target left over from a previous makepp run will appear stale if the only way to
build it is via a last_chance rule that hasn't been instanced for the target yet, which is a
desirable behavior because the build will fail more consistently when it erroneously relies on a
wildcard to match targets from a previous run.

The ":last_chance" option is intended to call attention to the special behavior of the rule with
respect to matching wildcards.

:parser parser
This tells makepp how to parse the command for detecting (include) files. Usually, makepp guesses
how to do this based on the words in the command itself (see makepp_scanning for details). However,
if makepp guesses wrongly, you may want to explicitly indicate the parser, like this:

%.o: %.abc
: parser c_compilation
action here

This causes makepp to perform the same parsing and scanning that it does for C/C++ build commands,
even if it doesn't recognize the action as a C compilation.

The default parser depends on the command. If you do not specify a ":parser" option, then the first
word of each command is examined. For example for a compile or link command, makepp will use the
"c_compilation" parser; or if the command looks like the GNU variant, "gcc_compilation". If no
parser is found it uses the "none" parser. For more details on this, or if you want to write your
own parser or change makepp's default parsers, see makepp_scanning.

Note that this applies to every command in the rule, which may not be what you want:

%.o: %.c : parser c-compilation
@echo 'Building $(output)'
@funny_cc ...

This will also interpret "echo" as a compiler and deduce its argument 'Building mymodule.o' as an
implicit dependency. This will lead to the complaint that it doesn't know how to build such a file.
In this case you would be better off with "register_parser". There you find an explanation how
parser can be given either as a classname or as a function name.

:signature signature_method
target : dependencies
: signature md5
actions

This tells makepp what algorithm to use to determine if the dependencies have changed. See
makepp_signatures for more details. Signature methods which are included with the makepp
distribution are are "plain", "md5", "C" or "c_compilation_md5", and "shared_object". This overrides
any signature method specified with the "-m" or "--signature-method" command line options, or with
the "signature" statement.

Special characters
Makepp can support filenames that have special characters in them like a colon or a space. Suppose, for
example, you want to create a file called "a:thing" from the file "b:thing". You can't write the rule
this way:

a:thing : b:thing # This is a syntax error
&cat $(input) -o $(output)

because makepp won't know which colons separate targets from dependencies and which are part of the
filenames. Instead, simply enclose the name in quotes, like this:

"a:thing" : "b:thing"
&cat $(input) -o $(output)

Now the rule is unambiguous.

Makepp's quoting syntax is quite similar to the shell's. You can, for example, use single quotes instead
of double quotes, or you can escape special characters with a backslash:

a\:thing : 'b:thing'
&cat $(input) -o $(output)

Suppose, for example, that your filename is "'"!;\$". Now why you'd want such a filename I don't know,
but here are several ways you could specify it to makepp (and the shell):

\''"!;\$$'
"'\"!;\\$$"

Pay attention as to when makepp strips quotes and when the shell does. Makepp looks at quotes only in
the following cases:

• in the "ifeq" family of tests

• before and after the rule colon

• in a makepp builtin command

• in a function that pertains to files

Unlike the shell, makepp doesn't expand quotes while assigning them to a variable. Thus the following
rules are identical:

FILE = 'name with spaces'
x := $(print $(FILE)) # just to check that quotes are still there
$(FILE): # quotes around single file stripped by makepp
&echo hello -o$(FILE) # quotes around single file stripped by makepp
echo there >>$(FILE) # quotes around single file stripped by Shell
'name with spaces':
&echo hello -o'name with spaces'
echo there >>'$(output)' # quotes were stripped above, add them again

Note that (unlike the Shell) variables beginning with "$" are expanded even inside single quotes. Dollar
signs cannot be protected by quotes or backslashes. To get a literal dollar sign, use a double dollar
sign, e.g.,

$(phony all):
@&echo This is a dollar sign: $$
@for val in a b c d; do echo $$val; done

Generally, you should be able to deal with just about any special character by quoting it in some way.
This includes spaces, control characters, etc. However, be aware that at present, makepp's comment
stripping is somewhat simplistic, and any "#" characters preceded by whitespace will be interpreted as
comments no matter how they are quoted.

When a target or dependency name is put into an automatic variable like "$(output)", then the quotes and
any backslashes are stripped. This means that if you want to reference the filename in the actions, you
will probably have to quote it again, like this:

"a file name with spaces":
echo "Special contents" > "$@"

If you don't put the quotes around $@, then the shell will see the command

echo "Special contents" > a file name with spaces

which writes the string "Special contents file name with spaces" to the file called a. This is probably
not what you want.

AUTHOR

       Gary Holt (holt-makepp@gholt.net)

perl v5.32.0                                       2021-01-06                                    MAKEPP_RULES(1)