Provided by: gfarm-client_2.7.20+dfsg-1.1ubuntu1_amd64 
NAME
gfpcopy - copy Gfarm files in parallel
SYNOPSIS
gfpcopy [-nqvdpPU] [-X regexp] [-S source-domainname] [-h source-hostfile] [-D destination-domainname]
[-H destination-hostfile] [-j num-of-processes] [-J num-of-processes] [-M limit-byte]
[-z minimum-byte] [-Z maximum-byte] [-w way-of-scheduling] [-W kilobytes-for-threshold]
[-s KB/s-to-simulate] [-F num-for-readahead] [-b bufsize] [-f] [-e] [-k] source-path
destination-path
DESCRIPTION
gfpcopy copies files in parallel.
When the source-path is a directory, files under the directory will be copied recursively.
When the destination-path does not exist, the directory is created. When the destination-path exists, a
directory of the same name as the source-path is created under the destination-path.
A set of source/destination hosts can be specified by a domain name and/or a hostlist file. When both a
domain name and a hostlist file are specified, a set of hosts is determined by both conditions. When a
set of source hosts is specified, only files stored on the source hosts are copied.
gfpcopy also retrieves the directory entries in parallel.
SOURCE PATH
source-path must be one of the following formats. Files on HPSS cannot be copied.
path-name
is a relative path or an absolute path of a local file system. When the path is a mount point on
gfarm2fs, files are copied without passing through the gfarm2fs.
gfarm:...
is a Gfarm URL.
file:...
is an URL of a local file system.
DESTINATION PATH
destination-path must be one of the following formats.
path-name
is a relative path or an absolute path of a local file system. When the path is a mount point on
gfarm2fs, files are copied without passing through the gfarm2fs.
gfarm:...
is a Gfarm URL of a directory.
file:...
is an URL of a directory on a local file system.
hpss:...
is an URL of a directory on HPSS. If the same directory as the source-path exists under this
directory, the source-path cannot be copied. The differential copy is not supported for HPSS.
Relative path such as "hpss:". and "hpss:dir" can be specified.
GFPCOPY OPTIONS
These are options only for gfpcopy.
-b bufsize
Specifies the buffer size in bytes to copy.
The default value is 64 KiB (64 * 1024).
-f
With the -f option, existing files will be overwritten when the size is different or the modification
time (mtime) is different from the source file.
Without the -f option, existing files will be overwritten when they are older than the corresponding
source files in the modification time.
-e
Skips existing files in order to execute gfpcopy simultaneously.
-k
Does not copy symbolic links.
COMMON OPTIONS
The following options are common options for gfprep and gfpcopy.
-X regexp
Skips files matched by the pattern of regexp. When multiple patterns need to be specified, specify -X
options multiple times.
-S source-domainname
Creates file replicas or copies files only stored on the hosts in the specified domain name.
-h source-hostfile
Creates file replicas or copies files only stored on the hosts listed in the specified hostfile. The
source-hostfile consists of a file system node name on each line.
If ``-'' is specified, standard input is used to read the host list.
-L
Creates file replicas or copies files from the hosts specified by the -S or -h option.
-D destination-domainname
Specifies the domain name for destination.
If neither this nor the -H option is specified, replicas may be copied to any available host.
-H destination-hostfile
Specifies a file which describes hostnames for destination. The destination-hostfile consists of a
file system node name on each line.
If ``-'' is specified, standard input is used to read the host list.
-j num-of-processes
Specifies the maximum number of processes to create file replicas (or copy files) simultaneously.
The default value is the parameter of client_parallel_copy in gfarm2.conf. (see man gfarm2.conf)
The maximum number of process per file system node for source or destination is the number of CPUs
(see man gfhost).
-J num-of-processes
Specifies the number of processes to retrieve directory entries in parallel.
The default value is 8.
-M total-byte
Specifies the total file size in bytes to replicate or copy. This option is useful to increase the
available capacity by moving the specified bytes of files.
The default value is unlimited.
-z minimum-byte
Specifies the minimum file size in bytes to replicate or copy. This option is useful not to replicate
or copy small files.
The default value is unlimited.
-Z maximum-byte
Specifies the maximum file size in bytes to replicate or copy. This option is useful not to replicate
or copy large files.
The default value is unlimited.
-w way-of-scheduling
Specifies a scheduling method. ``noplan'' replicates/copies while finding files. ``greedy'' schedules
greedily the order of replication/copy beforehand.
The default behavior is ``noplan''.
``greedy'' scheduling cannot use with the -N option and -m option.
-W kibibytes
Specifies a threshold size/cost(KiB) to flat costs of Connections. A Connection means a scheduling
information to assign files per a child-process
This option is effective with -w greedy.
The default value is 50*1024 KiB (50 MiB).
-I sec-to-update
Specifies the interval in seconds to collect load average and available capacity.
Default is 300 seconds.
-B
Gfarm 2.6.16 or later does not select high loaded file system nodes. This option disables this
feature.
High loaded node is defined by having more CPU load than schedule_busy_load_thresh * number of CPUs.
For details of schedule_busy_load_thresh, refer to a manual page of gfarm2.conf.
-U
Disables checking the available disk space of the selected node every time.
-F num-of-dirents
Specifies the number of readahead entries to retrieve the directory entries.
The default value is 10000.
-s kilobytes-per-second
Specifies a throughput(KB/s) to simulate the replication/copy, and does nothing (gets file
information only).
-n
Does nothing.
-p
Reports the total performance information.
-P
Reports the performance information for each file and all files.
-q
Suppresses non-error messages.
-v
Displays verbose output.
-d
Displays debug output.
-?
Displays a list of command options.
EXAMPLES
To copy files under the directory recursively.
$ gfpcopy gfarm:///dir file:///tmp/dir
$ gfpcopy file:///tmp/dir gfarm:///dir
$ gfpcopy gfarm:///dir1 gfarm:///dir2
$ gfpcopy gfarm:///dir hpss:///tmp/dir
$ cd /mnt/gfarm2fs
$ gfpcopy dir /tmp/dir
To copy a file.
$ gfpcopy gfarm:///dir/file file:///dir
$ cd /mnt/gfarm2fs
$ gfpcopy file /tmp/dir
NOTES
To retrieve the directory entries efficiently, it is better to execute gfpcopy command near the metadata
server. When you need to execute gfpcopy command far from the metadata server, increase the parallelism
by the -j and -J options.
SEE ALSO
gfprep(1), gfreg(1), gfexport(1), gfarm2.conf(5)
Gfarm 27 Aug 2015 GFPCOPY(1)