Provided by: fasd_1.0.1-3_all 
NAME
fasd - quick access to files and directories
SYNOPSIS
fasd [options] [query ...]
[f|a|s|d|z] [options] [query ...]
fasd [-A|-D] [paths ...]
OPTIONS
-s list paths with ranks
-l list paths without ranks
-i interactive mode
-e <cmd> set command to execute on the result file
-b <name> only use <name> backend
-B <name> add additional backend <name>
-a match files and directories
-d match directories only
-f match files only
-r match by rank only
-t match by recent access only
-R reverse listing order
-h show a brief help message
-[0-9] select the nth entry
DESCRIPTION
Fasd keeps track of files and directories you access in your shell and gives you quick access to them.
You can use fasd to reference files or directories by just a few key identifying characters. You can use
fasd to boost your command line productivity by defining your own aliases to launch programs on files or
directories. Fasd, by default, provides some basic aliases, including a shell function "z" that
resembles the functionality of "z" and "autojump."
The name "fasd" comes from the default suggested aliases f(files), a(files/directories),
s(show/search/select), d(directories).
Fasd ranks files and directories by "frecency," that is, by both "frequency" and "recency." The term
"frecency" was first coined by Mozilla and used in Firefox.
EXAMPLES
z bundle
f -e vim nginx conf
f -i rc$
vi `f nginx conf`
cp update.html `d www`
open `sf pdf`
SHELL INITIALIZATION
To get fasd working in a shell, some initialization code must be run. Put lines below in your POSIX
compatible shell rc.
eval "$(fasd --init auto)"
This will setup a command hook that executes on every command and advanced tab completion for zsh and
bash.
If you want more control over what gets into your shell environment, you can pass customized set of
arguments to fasd --init.
zsh-hook # define _fasd_preexec and add it to zsh preexec array
zsh-ccomp # zsh command mode completion definitions
zsh-ccomp-install # setup command mode completion for zsh
zsh-wcomp # zsh word mode completion definitions
zsh-wcomp-install # setup word mode completion for zsh
bash-hook # add hook code to bash $PROMPT_COMMAND
bash-ccomp # bash command mode completion definitions
bash-ccomp-install # setup command mode completion for bash
posix-alias # define aliases that applies to all posix shells
posix-hook # setup $PS1 hook for shells that's posix compatible
tcsh-alias # define aliases for tcsh
tcsh-hook # setup tcsh precmd alias
Example for a minimal zsh setup (no tab completion):
eval "$(fasd --init posix-alias zsh-hook)"
Note that this method will slightly increase your shell start-up time, since calling binaries has
overhead. You can cache fasd init code if you want minimal overhead. Example code for bash (to be put
into .bashrc):
fasd_cache="$HOME/.fasd-init-bash"
if [ "$(command -v fasd)" -nt "$fasd_cache" -o ! -s "$fasd_cache" ]; then
fasd --init posix-alias bash-hook bash-ccomp bash-ccomp-install >| "$fasd_cache"
fi
source "$fasd_cache"
unset fasd_cache
Optionally, if you can also source fasd if you want fasd to be a shell function instead of an executable.
You can tweak initialization code. For instance, if you want to use "c" instead of "z" to do directory
jumping, you can use the alias below:
alias c='fasd_cd -d'
# `-d' option present for bash completion
# function fasd_cd is defined in posix-alias
MATCHING
Fasd has three matching modes: default, case-insensitive, and fuzzy.
For a given set of queries (the set of command-line arguments passed to fasd), a path is a match if and
only if:
1. Queries match the path in order.
2. The last query matches the last segment of the path.
If no match is found, fasd will try the same process ignoring case. If still no match is found, fasd
will allow extra characters to be placed between query characters for fuzzy matching.
Tips:
• If you want your last query not to match the last segment of the path, append `/' as the last query.
• If you want your last query to match the end of the filename, append `$' to the last query.
COMPATIBILITY
Fasd's basic functionalities are POSIX compliant, meaning that you should be able to use fasd in all
POSIX compliant shells. Your shell need to support command substitution in $PS1 in order for fasd to
automatically track your commands and files. This feature is not specified by the POSIX standard, but
it's nonetheless present in many POSIX compliant shells. In shells without prompt command or prompt
command substitution (tcsh for instance), you can add entries manually with "fasd -A". You are very
welcomed to contribute shell initialization code for not yet supported shells.
TAB COMPLETION
Fasd offers two completion modes, command mode completion and word mode completion. Command mode
completion works in bash and zsh. Word mode completion only works in zsh.
Command mode completion is just like completion for any other commands. It is triggered when you hit tab
on a fasd command or its aliases. Under this mode your queries can be separated by a space. Tip: if you
find that the completion result overwrites your queries, type an extra space before you hit tab.
Word mode completion can be triggered on any command. Word completion is triggered by any command line
argument that starts with "," (all), "f," (files), or "d," (directories), or that ends with ",," (all),
",,f" (files), or ",,d" (directories). Examples:
$ vim ,rc,lo<Tab>
$ vim /etc/rc.local
$ mv index.html d,www<Tab>
$ mv index.html /var/www/
There are also three zle widgets: "fasd-complete", "fasd-complete-f", "fasd-complete-d". You can bind
them to keybindings you like:
bindkey '^X^A' fasd-complete # C-x C-a to do fasd-complete (fils and directories)
bindkey '^X^F' fasd-complete-f # C-x C-f to do fasd-complete-f (only files)
bindkey '^X^D' fasd-complete-d # C-x C-d to do fasd-complete-d (only directories)
BACKENDS
Fasd can take advantage of different sources of recent / frequent files. Most desktop environments (like
Gtk) and some editors (like Vim) keep a list of accessed files. Fasd can use them as additional backends
if the data can be converted into fasd's native format. As of now, fasd supports Gtk's recently-
used.xbel and Vim's viminfo backends. You can define your own backend by declaring a function by that
name in your .fasdrc. You set default backend with _FASD_BACKENDS variable in our .fasdrc.
TWEAKS
Upon every execution, fasd will source "/etc/fasdrc" and "$HOME/.fasdrc" if they are present. Below are
some variables you can set:
$_FASD_DATA
Path to the fasd data file, default "$HOME/.fasd".
$_FASD_BLACKLIST
List of blacklisted strings. Commands matching them will not be processed.
Default is "--help".
$_FASD_SHIFT
List of all commands that needs to be shifted, defaults to "sudo busybox".
$_FASD_IGNORE
List of all commands that will be ignored, defaults to "fasd ls echo".
$_FASD_TRACK_PWD
Fasd defaults to track your "$PWD". Set this to 0 to disable this behavior.
$_FASD_AWK
Which awk to use. fasd can detect and use a compatible awk.
$_FASD_SINK
File to log all STDERR to, defaults to "/dev/null".
$_FASD_MAX
Max total score / weight, defaults to 2000.
$_FASD_SHELL
Which shell to execute. Some shells will run faster than others. fasd
runs faster with dash and ksh variants.
$_FASD_BACKENDS
Default backends.
$_FASD_RO
If set to any non-empty string, fasd will not add or delete entries from
database. You can set and export this variable from command line.
$_FASD_FUZZY
Level of "fuzziness" when doing fuzzy matching. More precisely, the number of
characters that can be skipped to generate a match. Set to empty or 0 to
disable fuzzy matching. Default value is 2.
$_FASD_VIMINFO
Path to .viminfo file for viminfo backend, defaults to "$HOME/.viminfo"
$_FASD_RECENTLY_USED_XBEL
Path to XDG recently-used.xbel file for recently-used backend, defaults to
"$HOME/.local/share/recently-used.xbel"
DEBUGGING
Fasd is hosted on GitHub: https://github.com/clvv/fasd
If fasd does not work as expected, please file a bug report on GitHub describing the unexpected behavior
along with your OS version, shell version, awk version, sed version, and a log file.
You can set _FASD_SINK in your .fasdrc to obtain a log.
_FASD_SINK="$HOME/.fasd.log"
COPYING
Fasd is originally written based on code from z (https://github.com/rupa/z) by rupa deadwyler under the
WTFPL license. Most if not all of the code has been rewritten. Fasd is licensed under the "MIT/X11"
license.
AUTHORS
Wei Dai <x@wei23.net>.
fasd user manual Jul 16, 2012 FASD(1)