Provided by: exmh_2.9.0-6_all 
NAME
exmh - An introduction to the exmh mail user interface.
INTRODUCTION
This man page provides a quick tour through some of the basic features of exmh version 2.0, which
provides a graphical user interface to the MH mail system.
After you read this tutorial you should be able to use exmh for your basic daily mail reading needs. You
will learn how to send mail, read mail, manage your messages in folders, and adjust some of the exmh
features by means of its Preferences user interface.
There is much more documentation available on-line through HTML pages that are viewable from within exmh.
In particular. exmh-use provides information about using the more advanced features of exmh. If you are
already an experienced email user, you may want to just read the GETTING STARTED section here and then
skip to the exmh-use man page. exmh-custom describes how to customize exmh to suit your needs. exmh-ref
lists each button and menu entry in exmh and explains what they do. If you are an experienced exmh user,
this may be the most useful man page for you.
A cleaned up version of these man pages appear in the 3rd edition of the book by Jerry Peek, MH & xmh:
email for users and programmers, which is published by O'Reilly & Associates.
Web versions of the documentation can also be found at
http://www.beedub.com/exmh/
GETTING STARTED
If you are already an MH or xmh user, you can start with the examples given in this tour. If you are a
new user, exmh will set up your basic MH environment. This includes a Mail directory which will have one
subdirectory for each mail folder, plus several files that MH mail uses for its own purposes. You also
get a ~/.mh_profile file that has user settings for MH and exmh.
Exmh uses the regular MH programs to manipulate your mail folders and messages. This means it is
compatible with command-line use of MH programs, and its actions should be familiar if you are an
experienced MH user. If you are a new MH user, then the details of running MH programs is hidden behind
the graphical interface. The MH programs used by exmh are described towards the end of this man page.
When you run exmh for the first time it checks a few things in your MH profile. In particular, it
depends on the Draft-Folder and Unseen-Sequence profile components. If these profile components are not
present, a dialog appears and exmh can set them up for you. If you do not let exmh create them nor set
them up by hand, exmh will not work properly. These profile entries are described in the exmh-ref man
page.
Exmh has been designed to be very flexible, although it will work just fine "out of the box". The
Preference package used to adjust some of the settings in exmh is introduced in this man page, and some
of the important settings are described here. A more complete guide to customizing exmh is given in the
exmh-custom man page.
RUNNING EXMH
The command to start exmh looks like this: exmh -display hostname:0 & If your DISPLAY environment
variable is set up properly, then the -display argument is not needed, and the command is even simpler.
You do not need to specify a -geometry argument, although exmh supports one. Instead, simply position
and size the window using your window manager. When exmh quits, it saves the geometry information so you
don't have to worry about it. It does this with all its top level windows, so you can adjust their
position once and then forget about it. There are more command line options described in the exmh-ref
man page.
You can add the exmh command to your startup X environment by editing your startup file (like .xsession).
You might also want to add it to the main menu of your window manager. The details about this vary from
X system to X system, so ask your local X guru for help. Exmh also supports the window manager session
protocol, which means that session-smart window managers will automatically start exmh for you if you
quit X when exmh is running.
THE EXMH DISPLAY
This section describes the main parts of the exmh display. It probably makes sense to run exmh at this
point so you can follow along. There are three sets of buttons in the interface, and three main
subwindows.
Main Buttons. Along the top of the window is a set of buttons and menus that apply to exmh itself.
Quit, for example, quits exmh. The Help button pops up a menu, and you can select the entries there to
get more on-line information about exmh. Use the left mouse button to select the buttons and menus. A
button will change its appearance when you press it, and it will be invoked when you release the mouse
over the button. If you slide the mouse off the button before releasing it, nothing happens.
Folder Display. Below the main buttons is the folder display subwindow. It has a special button for
each of your top-level folders, and these are called folder labels. As a new user you will see two
folder labels, one for inbox and drafts. The inbox folder is for your new messages, and the drafts
folder is for messages you are writing. If you have used MH (or xmh) before, then you may have many more
folders that will appear in this display. The mouse bindings for folder labels are explained in the
exmh-use man page. The Color Legend from the Help menu also tells you how the folder labels respond to
mouse clicks.
Folder Cache. A second folder display called the folder cache may appear under the main folder display.
This shows the folder labels for recently used folders. If you only have a few folders this wastes
screen real estate. The PREFERENCES section near the end of this man page explains how to turn this off
via the Folder Cache preferences setting. If you are a first-time exmh user, Exmh tries to guess if you
need this display based on the number of folders and nested folders you have.
Folder Buttons. The middle set of buttons is for operations that apply to folders. For example, you can
create a new folder with the New button here. The More... button displays a popup menu with several more
operations you can apply to folders. Some of these buttons will be introduced in this man page. All of
these buttons and menus are explained in detail in the exmh-ref man page.
To the left of the folder buttons, summary information about the current folder is displayed.
Table of Contents. The middle subwindow of the display shows a summary of the messages in the folder.
It shows the message number, the date of the message, the subject of the message, and, space permitting,
the first few words of the message. Left click on a line in the table of contents to view the
corresponding message. The mouse bindings for the table of contents are described in more detail in the
exmh-use man page.
MH experts: The display in this window comes from both the MH scan program or MH inc programs, so it is
affected by the form specification used by these programs.
Color and Monochrome Highlights. Both the folder display and table of contents windows use highlights to
give you visual clues about the state of messages and folders. Your unread messages are highlighted in
the table of contents and the folders that contain unread message are highlighted in the folder display.
Pull down the main Help menu and select Color Legend to display a key to the highlights for your display.
The highlighting is covered in more detail later in the exmh-use man page. The exmh-custom man page
tells how you can control the highlighting yourself.
Status Line. Just below the table of contents is the status line. This has two parts. The left part
shows the name of the folder and the message number for the current message, if any. The right part
gives feedback about what exmh is doing. After it displays a message, the Subject component is displayed
there.
Subwindow Resize Diamond. The black diamond to the right of the status line is used to change the size
of the internal windows. Press the first mouse button on this target and a horizontal line appears.
Drag it up and down to adjust the window sizes. Try dragging it all the way to the top and bottom of the
exmh window to see how the mode changes to adjust different windows.
Message Buttons The bottom row of buttons are for operations that apply to the current message. Several
of these operations will be introduced in this man page. The right hand button labeled More... brings up
a menu with several more advanced message operations.
Hint: Many of these message operations have keyboard shortcuts that make it easy to use exmh with your
hands on the keyboard. Some of the short-cuts are introduced in this man page, and all of them are
listed in the exmh-use man page.
Message Display. The bottom subwindow displays the current message, if any. Some of the less
interesting mail headers start out scrolled off the top of this window.
SENDING MAIL
A good way to test things out is to send a message to yourself. Here are the steps you take to do that:
1. Click the Send button, which is in the Message buttons in the bottom group. A new window will open
that contains the template for your message. The built-in editor, which is called sedit, will start out
with the insert cursor positioned at the end of the first empty header line. Enter your user name after
the To: header. If you want to send the message to more than one person, use a comma to separate the
names.
2. Position the insert cursor on the next header line. You can do this a few different ways. The most
direct way is to click the left mouse button where you want the cursor to be. There are keyboard
shortcuts, too. If you press <Tab> the editor will take you to the end of the next header line. You can
also use the arrow keys or some emacs-like bindings to move the cursor. <Control-n> goes to the next
line, <Control-f> moves the cursor forward a character. <Control-p> moves up a line, and <Control-b>
moves back a character. The Simple Edit menu entry shows you all the keybindings.
3. The next header is the Cc: line. People listed in the Cc: line get a "courtesy" (or "carbon") copy
of the message. By convention, the message is primarily for the people listed in the To: component, and
the people in the Cc: component are getting the message "for information." In this case, you can leave
the Cc: component empty.
Move the insert cursor to the Subject: line and enter a Subject. The people that receive your message
will get an idea of what the message is about from the subject, so take a moment to think of a good one.
For this test, you can type something like "exmh test message".
4. Make sure the headers are OK. In particular, make sure there are no blank lines in the headers. The
mail system treats a blank line as meaning "end-of-headers", so you don't want to prematurely end the
header section. If you have a blank line, position the insert cursor on it and use Backspace to remove
the empty line.
Position the cursor at the start of the message body. You can use the mouse for this, or you can press
<Tab> twice quickly and the editor will position the cursor correctly. When using the default MH message
templates, this will be right after the line of all dashes.
5. Type in your message. When you type in a long message, the lines will wrap automatically at word
boundaries. To get a blank line for paragraph boundaries, press <Return>. The built-in editor supports
several editing commands that are based on the GNU emacs key bindings. If you select the Simple Edit
menu entry under the main Bindings menu, you will bring up a dialog that lets you view and edit the key
bindings.
6. If you are happy with the message, you send it by pressing the Send button at the top-right corner of
the window. The Send button will turn grey, and the window will disappear once the message has been sent
successfully.
If you do not want to send the message, press the Abort button instead. If you want to save the message
draft and continue to work on it later, press the Save&Quit button. Working on a saved draft message is
described in the exmh-use man page.
Send yourself a few messages, or have a friend send you a few test messages. You will use these test
messages to practice moving around in a folder and deleting messages. Make one of the messages pretty
long so you can practice scrolling through it.
Finally, try sending mh-mime-sample@online.ora.com a message. This addresses a program that will return
a MIME message to you. Just put this address in the To field with anything as the message body and
subject. Reading this message will be described below.
MOUSING AROUND
The selection is dragged out with the left mouse button. You can modify the selection by holding the
Shift key while pressing the left button. A double-click begins a word-oriented selection, and a triple-
click begins a line-oriented selection. If you drag a selection off the bottom or top of a window the
text will be scrolled automatically and the selection will be extended.
Paste is done with the middle mouse button. The current insert point is used, not the point at which you
middle-click. If you drag the middle mouse button, then the window is scrolled instead as described
below. There is also a key-binding for paste, which is <Control-y>. Use <Control-w> or the <Delete> key
to delete the selection.
The middle mouse button is used for "drag-scrolling". To scroll, simply press the middle mouse button
over the text and drag the text. If you press the Shift key, the scrolling is faster. Drag-scrolling
works in the text widgets, for vertical scrolling, and the one-line entry widgets, for horizontal
scrolling. The text widgets are used to display the folder contents and the current message. The entry
widgets are used in various dialogs in order to enter values. You can change the scrolling button to the
right button or to only work with shift-middle. Set this up in the Simple Edit Bindings... dialog.
Buttons and menus are also sensitive to which mouse button is pressed. Only the left button activates a
button, and it is the <ButtonRelease> event that is important. If you accidentally move the mouse off of
the button as you release it, nothing will happen. Don't worry, the wrong button will not be invoked.
Press the left button over a menu button to pull down a menu. Most of the menus in exmh are
distinguished with a "..." in their label, e.g. "More...". The menu will go away when the button is
released. Release the mouse button off the menu if you do not want to invoke any menu item. (In some
versions of Tk, the middle button will "tear off" a Tk menu. This is quite handy if you use the menu
often. To get the menu to go away, you must click the left button over the menu button. This will
reattach the menu to the menu button, and another left click will make the menu go away. In the latest
versions of Tk, the first menu entry is a dashed line that invokes this tear-off operation.)
GETTING NEW MAIL
By now you should have some new mail waiting. Press the Inc button from the middle set of buttons that
do Folder operations. This will transfer messages from your system spool file into your inbox folder.
You will hear an audible cue if there was new mail, and the table of contents will be updated to reflect
the new messages in your inbox. New messages will be underlined (on a monochrome screen), or blue (on a
color screen), to indicate that you have not read them yet.
To view the new message, click on its line in the table of contents, or press the Next button in the
bottom group of buttons. The message will be displayed in the bottom subwindow, and the line in the
table of contents will be highlighted to remind you which message is being displayed.
To view the next message, click the Next button. The keyboard shortcut for this is the 'n' key.
The view the previous message, click the Prev button. The keyboard shortcut for this is the 'p' key.
Scrolling through messages. If you get a message that is too long to fit into the message window, then
the scrollbar will change its appearance to indicate how much text is displayed. The scrollbar is Motif-
like. You can click on the arrows at either end to go up and down one line. If you click above or below
the elevator box you go up and down one page. You can drag the elevator box to scroll, too.
You can also scroll text windows in exmh by dragging with the middle mouse button. Press the middle
button over the text area, not the scrollbar, and hold it down while you move the mouse up or down. If
you hold the shift key at the same time, the scrolling is faster. This works in the folder Table of
Contents window, too.
Hint. The space bar is a keyboard short-cut that does a combination of scrolling and advancing to the
next message. If the message is long, then space will scroll by one screen. Once you are at the end of
the message, space will advance to the next message, just like the 'n' key. You can use the BackSpace
key to scroll back through a message.
READING MIME MESSAGES
By now you should have also received the sample MIME message from mh-mime-sample@online.ora.com. The
MIME message has three parts to it, and these are numbered and labeled in the display. The first part is
a multipart/alternative content, which means there are a few different ways to view the content. This is
indicated by the message under the heading 1. that there are alternative views of the following content.
Exmh will go ahead and display what it thinks is the best alternative, and you see the text/enriched
content displayed in part 1.2. If you want to see the other alternatives, then you can press the right
button over section 1 to get a popup menu with some choices.
The next two parts are an audio clip and a picture in GIF format. The audio clip is handled directly by
exmh, and it displays two active text buttons labeled "Play attached audio" and "Save audio file". Click
on either of these with the left mouse button. The part corresponding to the image displays a message
about what the type is, and suggests that you press the right mouse button to display a menu. You can
always press the right button to get a MIME menu that has type-specific options for parts of your
message. If you press the right button over part 2., then the popup menu will offer you these choices:
Decode part as MIME Save Hello from the author... View using mailcap rule... Pass an audio fragment to
metamail... The first item is a checkbox menu item that lets you view the raw content if you want to.
The Save... menu entry displays a file selection box so you can choose a non-temporary file to store the
content. This same function is available through the text button, but not all MIME parts displays
buttons like this. The next two entries should result in the same thing. They use the mailcap
specifications to run another program that displays the content. In the first case, View using mailcap
rule..., exmh runs the program directly. In the other case, Pass to metamail..., the metamail program is
run first, and it decodes the mailcap file and runs the external program. Again, the text button labeled
"Play attached audio" also plays the audio.
REPLYING TO MAIL
Select one of the messages from your friend that you'd like to answer. Press the left button over the
Reply... menu button. A menu with a few entries will be displayed. Select the Reply to sender menu
entry by dragging the mouse down to that entry and letting up over it. The menu entry has a <Key-r> in
it, which means that you could also press the 'r' key to invoke this function.
This time the built-in editor will open a window with a message that is partly filled in. All the
headers are initialized based on the header components from the original message. The built-in editor
will automatically position the cursor at the beginning of the message body. You can enter your reply
message like you did with the previous messages. You should also double-check the header components. In
this case, add yourself to the Cc: component so you will get a copy of the reply message. When you are
done, press the Send button in the editor window to send the message.
There are a number of ways to control the format of your reply messages. The MH repl command has several
formatting options, and because exmh uses repl to set up the reply message, you can customize your reply
format. Exmh lets you define several variations on reply and add them to the Reply... menu. This is
described in the exmh-custom man page.
It should not take long for you to get the copy of the reply message. Wait a minute or so and press the
Inc button. The keyboard short-cut for Inc is the 'i' key.
SELECTING MESSAGES
Before we go on to more things you can do with messages, we need to talk about selecting multiple
messages at once. Several of the message operations in exmh can operate on a set of messages. You can
manually select multiple messages by using the mouse, or you can select messages based on their content.
Using the Mouse. To select messages with the mouse, press the left button and then drag out a selection.
This will select a contiguous range of messages. If the messages you want to select are not so nicely
organized, you can make a disjoint selection by holding down the Shift key while making your selection.
This adds new messages to the selection. If you shift-click on a message that is already selected, then
it becomes unselected. If you need to select a lot of messages, simply drag the mouse off the top or
bottom of the window. It will be scrolled automatically and the selection will be extended.
SEARCHING
The Search... menu has several operations for finding messages and finding text within a message. There
is also a help entry that explains searching in more detail.
If you select "Find in message body" or "Find in table of contents" a small search dialog appears. Enter
the search string and use the Next or Prev buttons to find the next match. When you are searching over
the table of contents, you can select All to select all matching messages.
The other way to search a folder is with "Pick by attributes". The MH pick program is used to search the
current folder for messages that match mail headers like From or Subject. You can build up boolean
expressions among search criteria. This is a much more general search mechanism than the "Find in table
of contents" operation.
Get started in the Pick dialog by pressing the "Choose pick attribute" button. A menu of attribute types
appears, including the Subject, From, To, and Cc header components. You can type a regular expression
pattern in these entries to search for messages that have a matching header component.
The Before and After attributes are dates. You can find all messages before or after a given date by
using these fields. You can specify dates as mm/dd/yy. Be sure to include the year. Dates can also be
keywords like "today", "yesterday", "tomorrow", and any day of the week ("Sunday", "Monday", and so on.)
The Search attribute is used to search for something in the body of a message. This will run little
slower because pick must read through all of your messages, not just their headers.
If you select more than one attribute, pick finds messages that match all the criteria. In other words,
it does the logical and of the search criteria. If you want to search for this or that, then you need to
press the Or button in the dialog. This adds another set of fields to the dialog, and pick will search
for everything that matches the first set or matches the second set.
The "Add to Sel" checkbutton should be set before you do the search. This controls whether or not the
selected messages are added to any existing selection.
Finally, use the "Pick" button to do the search. Once the search has completed you can perform a few
operations on the selection. You can delete and refile messages as described later. You can also
display a new table of contents that only contains the selected messages. Use the "New FTOC" button for
this. You can also clear the unseen state of the messages with the "Mark Seen" button.
The "Clear" button resets the fields.
The two entries in the dialog are used to control MH sequences. The only sequence exmh really supports
well is the "unseen" sequence, although you can define up to 10 sequences in each folder.
If you use New FTOC to get a new scan listing, it would be better if it appeared in a new window, but
currently it replaces the table of contents. You can move around and manipulate messages in this table
of contents. However, if you do another pick, it will only find things in this limited table of
contents, not the whole folder. (Yes, this is a bug.) Use the Rescan Folder menu entry in the folder
More... menu to get a complete folder listing.
FORWARDING MESSAGES
If you want to send someone a copy of a message or messages that you have received, use the Forward
message operation. Select the messages as described in the previous section, then press the Forward
button. The keyboard short-cut for forward is the 'f' key.
The message template will have a copy of the selected messages. You fill in the headers, and you can
also add a short message before the start of the forwarded messages. When you are done, press Send to
forward the messages.
DELETING MESSAGES
After you have read a message, you might want to remove it to keep your mail folders tidy. Exmh uses two
steps to remove mail. In the first step you mark a message as being deleted. In the second step you
commit the operations on all marked messages. It turns out that delete just renames your message files.
They will survive until you get another message by the same number and remove it, too. In addition, exmh
has a "Purge Folder" operation that removes these renamed files if they are more than a week old.
The Delete operation applies to the current message, or you can also select a range of messages by
dragging out a selection in the table of contents. You can delete the current message(s) by pressing the
Delete button. The keyboard short-cut is the 'd' key. The deleted message(s) will be highlighted after
the delete operation so you can easily see the state of the message. On a monochrome screen, a cross
hatching will be drawn through the table of contents line for the message. On a color screen, the table
of contents line will get a dark grey background.
After you mark a message for delete, you are automatically advanced to the next message. This makes it
easy to go through your folder and clean it up. Click 'd' to delete, or click 'n' to leave it alone.
Hint. If you are really in a hurry, use 'D' and 'N' as your keyboard short-cuts. This prevents the next
message from being displayed, which can be slow for complex multi-media messages.
When you are ready to commit the pending delete actions, press the Commit button. The keyboard shortcut
for commit is <Control-Return>.
If you decide you do not want to delete a message you can unmark it. Use the Unmark (Undo) menu entry
that is under the message More... menu. The unmark operation applies to the current message or messages,
so you have to select the messages to unmark first. The keyboard short-cut for unmark is 'u'.
Hint. The minus, '-', keyboard shortcut takes you to the previous message, even if it has been marked
for delete. Ordinarily the Prev operation, and the 'p' short-cut for it, will skip over marked messages.
LEAVING EXMH
Press the Quit button to leave exmh. It will take a few moments to close down because it saves some
state information before quitting. The Quit button will grey out after you click it, and you will see a
few status messages as it shuts itself down.
PREFERENCES
Try out the Preferences by turning off the folder cache. This just takes up display space if you don't
have many folders. If you have lots of nested folders, though, you might even want to make this display
bigger!
Click the Preference button, which brings up a dialog that has buttons for several of the modules that
make up exmh. Click on the Folder Cache button to bring up the preference items that control the folder
cache. In this case there are just two items: the number of lines of labels in the cache, and the names
of folders that are always in the cache. Click in the first field and backspace over the default value
of 1. Type in 0 instead, and press <Return>. Voila! The folder cache disappears.
If you like this setting, press Save on the main Preference dialog and your changes will be saved to a
file named ~/.exmh-defaults. Press Reset if you want to undo your changes. You should be a little
careful here, because you are allowed to Dismiss the preference dialog without saving.
Another useful preference item to set is under Background Processing. You can arrange for exmh to
periodically run inc so your messages are automatically transferred into your inbox. The advantage of
doing this is that the folder label highlighting works best this way. Unfortunately, exmh does not give
you any visual clues when mail is only waiting in your system spool file.
More details about the Preferences dialog are given in the exmh-use man page, and an overview of the
various preference sections is given in the exmh-custom man page..
WHAT IS MH MAIL?
MH is a collection of UNIX programs that store, manipulate, and display your mail. MH originated from
RAND, and it is now in the public domain. Exmh uses these programs to do all the hard work, while it
concentrates on the user interface.
You can use the MH programs to read your mail. Run them from the UNIX command line like you would cd,
ls, cc, or make. They are useful when you are connecting over a slow line or cannot run exmh for some
other reason. For more details, there are individual man pages for each MH program, plus one overview
man page called MH. Below is a short summary of the main MH programs used by exmh.
folder Query or set the current folder.
inc Incorporate mail from your system spool file into your folders.
scan Display a listing of a mail folder.
show Display a mail message.
next Display the next mail message. (Exmh doesn't actually run this.)
prev Display the previous mail message. (Exmh doesn't actually run this.)
rmm Delete a mail message.
refile Move a message into another mail folder.
repl Reply to a mail message
forw Forward one or more mail messages.
comp Compose a new mail message.
MH keeps track of the current folder and the current message in between uses of these MH programs. For
example: % scan +inbox unseen 1713 04/14 foote.PARC@xerox. Have you started blasting cdroms
yet?<<Probably. 1715 04/14 FlashBack Publish 1232: Tactix Introduces Break through in Unix Ad 1716
04/14 FlashBack Publish 1234: CERT Advisory - NCSA HTTP Daemon for UNIX< 1717 M04/15 To:welch
PGP test<<-----BEGIN PGP MESSAGE----- Version: 2 1718 M04/17 flash@flashback.c mime-flashback-w MIME
FlashBack April 13th, 1995 1719 -04/16 Bill Wohler Notes for MH Chapters 20-22<<Brent, I have been
1720+-04/17 "Allen R. Carl" Re: Tabs<<Brent, where is this -tabs resource se % show 1717 (Message 1717
displayed) % next (Message 1718 displayed) % rmm (Message 1718 deleted) % repl 1717 (Set up template for
reply to message 1717, invoke editor)
Each user has a .mh_profile file that stores general MH settings as well as per-command settings. Each
line has a key, and a value. For example, your mail directory is set with the Path profile entry: Path:
Mail
If your old mail system uses that directory already, just edit your .mh_profile to change the name used
for your MH mail folders.
MORE ABOUT EXMH
This man page should get you started with exmh. If you decide you want to know more about it, here are
some of the features described in the other exmh man pages.
MIME support. Exmh can display MIME (Multipurpose Internet Mail Extensions) messages, either directly or
with the help of the metamail package. The built-in editor lets you compose enriched text messages and
insert files as parts of a multipart message.
Mail Folders. You can create other mail folders to hold messages about certain topics or from certain
people. You can create a hierarchical arrangement of folders, just like the hierarchical directory
structure of the file system. The folder display supports these nested folders, and it allows you to
nest folders to any depth.
Mail Filtering. Mail filtering lets you sort mail into different folders before you read it. If you get
lots of mail, this is a great way to avoid plowing through junk mail just to get your important messages.
The folder labels are highlighted to indicate which folders have unread mail in them.
Facesaver bitmap display. If you have a facesaver database on your system, exmh displays the bitmap face
of the person that sent the current message (or their organization).
Background processing. You can set exmh to run inc periodically, check for new messages arriving
asynchronously in folders, run the MH msgchk program, or count up the messages in your mail spool file.
Editor interface. You can hook exmh to your favorite editor using the exmh-async script. Or, Tcl-based
editors such as mxedit can interact with exmh directly.
Keybinding User Interface. You can define new key bindings for Tcl commands that are part of the
implementation.
Aliases User Interface. A browser for your MH aliases lets you define new aliases and insert aliases
into mail messages.
Pretty Good Privacy (PGP). If you have PGP, you can use it from exmh to digitally sign, encrypt, and
decrypt messages.
User Programming. If the preference settings are not enough for you, you can program exmh more directly.
You can define new buttons and menus and add new Tcl code to its implementation.
SEE ALSO
exmh-use, exmh-ref, exmh-custom, mh
AUTHOR
Brent Welch, <welch@acm.org>
THANKS
To Xerox PARC/CSL, for supporting this work initially, to Sun Microsystems Laboratories for continuing
the support, and to all the exmh users that contributed ideas and code.
Exmh 2.0 December 3, 1996 EXMH TOUR(1)