Provided by: distributed-net_2.9112.521+arm64-3_amd64 
NAME
dnetc — distributed.net distributed computing client for Linux
SYNOPSIS
dnetc [-config] [-flush] [-fetch] [-update] [-benchmark [prj]] [-benchmark2 [prj]] [-bench [prj [cn]]]
[-test [prj [cn]]] [-stress [prj [cn]]] [-cpuinfo] [-restart] [-shutdown] [-pause] [-unpause]
[-install [...]] [-uninstall] [-import <filename>] [-forceunlock <fn>] [-help] [-version] [-ini
<filename>] [-e <address>] [-nodisk] [-n <count>] [-runbuffers] [-frequent] [-inbase <fname>]
[-outbase <fname>] [-ckpoint <fname>] [-bin <prj> <n>] [-btime [prj] <n>] [-runoffline]
[-runonline] [-nettimeout <secs>] [-a <address>] [-p <port>] [-nofallback] [-u <method>] [-ha
<address>] [-hp <port>] [-lurk] [-lurkonly] [-interfaces <list>] [-c [prj] <n>] [-numcpu <n>]
[-devicenum <n>] [-priority <0-9>] [-l <filename>] [-smtplen <len>] [-smtpsrvr <host>] [-smtpport
<port>] [-smtpfrom <id>] [-smtpdest <id>] [-h <hours[:min]>] [-until <HH:MM>] [-noexitfilecheck]
[-pausefile <fn>] [-exitfile <fn>] [-multiok[=|:][0|1]] [-percentoff] [-quiet/-hide] [-noquiet]
DESCRIPTION
dnetc is a distributed computing client that coordinates with servers operated by distributed.net to
cooperate with other network-connected computers to work on a common task. It communicates over public
networks and processes work assigned by the distributed.net keyservers. It is designed to run in idle
time so as to not impact the normal operation of the computer.
INSTALLATION
Since you are already reading this, I assume you know how to unpack an archive into a directory of your
choice. :)
Now, simply fire up the client...
If you have never run the client before, it will initiate the menu-driven configuration. Save and quit
when done, the configuration file will be saved in the same directory as the client. Now, simply restart
the client. From that point on it will use the saved configuration.
The configuration options are fairly self-explanatory and can be run at any time by starting the client
with the '-config' option. A list of command line options is listed below.
OPTIONS
In addition to the conventional command line passed to the client from a shell, options may also be
passed to the client using either or both of the following methods:
- using the dnetc_opt= environment variable.
If set, this is parsed before the normal command line.
- using the //etc/distributed-net.conf
command files. If found, these are parsed after the normal
command line.
"Mode commands" (see below) cannot be executed using these methods, and there is no run-time display of
modified settings (unless the settings are also modified using the conventional command line, in which
case the last effective change is displayed).
Mode commands: (the client will execute the option and then exit)
-config start the configuration menu
-flush flush all output buffers
-fetch fill all input buffers
-update fetch + flush
-benchmark [prj]
16-20 sec speed check [optional: only project prj]
-benchmark2 [prj]
half (8-10 sec) and slightly inaccurate -benchmark
-bench [prj [cn]
-benchmark all cores [optional: only project prj]
[optional: only core cn, must be used with prj]
-test [prj [cn]
tests for core errors [optional: only project prj]
[optional: only core cn, must be used with prj]
-stress [prj [cn]
more thorough and longer running variant of -test
-cpuinfo print information about the detected cpu(s)
-restart restart all active clients
-shutdown gracefully shut down all active clients
-pause pause all active clients
-unpause unpause all active clients
-install [...]
install the client in /etc[/rc.d]/init.d/
all [...options...] that follow '-install' serve
as parameters for the installed client.
-uninstall remove the client from /etc[/rc.d]/init.d/
-import <filename>
import packets from file <filename> into client buffers
-forceunlock <fn>
unlock buffer file <fn>
-help display this text
-version print version information
Project and buffer related options:
-ini <filename>
override default name of INI file
-e <address>
the email id by which you are known to distributed.net
-nodisk don't use disk buffer files
-n <count> packets to complete. -1 forces exit when buffer is empty.
-runbuffers
set -n == -1 (exit when buffers are empty)
-frequent frequently check if buffers need topping-up
-inbase <fname>
input buffer basename (ie without 'extension'/suffix)
-outbase <fname>
output buffer basename (ie without 'extension'/suffix)
-ckpoint <fname>
set the name of the checkpoint file
-bin <prj> <n>
set fetch buffer threshold to <n> work units
-btime [prj <n>]
set fetch time threshold to <n> hours
If not specified, project name <prj> defaults to RC5
Network update related options:
-runoffline
disable network access
-runonline enable network access
-nettimeout <secs>
set the network timeout. Use -1 to force blocking mode
-a <address>
keyserver name or IP address
-p <port> keyserver port number
-nofallback
don't fallback to a distributed.net keyserver
-u <method>
use this UUE/HTTP encoding method (see -config)
-ha <address>
http/socks proxy name or IP address
-hp <port> http/socks proxy port
-lurk automatically detect modem connections
-lurkonly perform buffer updates only when a connection is detected
-interfaces <list>
limit the interfaces to monitor for online/offline status
Performance related options:
-c [prj <n>]
core number (run -config for a list of valid core numbers)
project name 'prj' defaults to RC5
-numcpu <n>
run <n> threads/run on <n> cpus. 0 forces single-threading.
-devicenum <n>
run on device <n> only.
-priority <0-9>
scheduling priority from 0 (lowest/idle) to 9 (normal/user)
Logging options:
-l <filename>
name of the log file
-smtplen <len>
max size (in bytes) of a mail message (0 means no mail)
-smtpsrvr <host>
name or IP address of mail (SMTP) server
-smtpport <port>
mail (SMTP) server port number
-smtpfrom <id>
who the client should say is sending the message
-smtpdest <id>
who the client should send mail to
Miscellaneous runtime options:
-h <hours[:min]>
time limit in hours
-until <HH:MM>
quit at HH:MM (eg 07:30)
-noexitfilecheck
override .ini exit flagfile setting
-pausefile <fn>
name of file that causes the client to pause
-exitfile <fn>
name of file that causes the client to exit
-multiok[=|:][0|1]
allow/disallow multiple instances of the client to run
The default is 'allow' for all platforms but Windows.
-percentoff
don't display work completion as a running percentage
-quiet/-hide
suppress screen output (== detach for some clients)
-noquiet don't suppress screen output (override ini quiet setting)
BUGS
distributed.net maintains a database to assist with the tracking and resolution of bugs in dnetc and
related software.
If you believe you have found a bug, please submit it to the distributed.net bug tracking database at
http://bugs.distributed.net/
Please provide the entire version descriptor as displayed on client start when doing so. For example, the
client version this manpage was generated for was "dnetc v2.9112-521-CFR-16020313 for Linux".
ENVIRONMENT
dnetc_opt (or the upper-case version thereof)
Additional source of command line options (parsed first)
FILES
/etc/distributed-net.conf
Additional sources of command line options (parsed last)
SEE ALSO
Client documentation: dnetc.txt and http://faq.distributed.net/
AUTHOR
distributed.net http://www.distributed.net/
Wed Feb 3 16:09:14 2016 DNETC(1)