Provided by: debtree_1.1.2_all 
NAME
debtree - show relationships between packages
SYNOPSIS
debtree [options] package
DESCRIPTION
Generates dependency graphs (in `dot' syntax) for the specified package. The output is written to STDOUT
and can be used as input for the command dot(1) from the package `graphviz'.
Dependency graphs will by default show (pre-)dependencies, recommended packages, unversioned conflicts,
and virtual packages provided by the requested package. Optionally also suggested packages and versioned
conflicts can be included.
Besides graphs showing regular dependencies, debtree can also generate graphs showing the reverse
dependencies of and the build dependencies for a package.
Dependency types
The type of dependency between packages is by line type and the color of the arrow indicating the
dependency:
Build-Depends: dark gold, bold
Build-Depends-Indep: light gold
Pre-Depends: purple, bold
Depends: blue
Recommends: black
Suggests: black, dotted
Conflicts: red
Provides: green, inverted arrow
By default the version requirements for versioned dependencies and conflicts will be shown alongside the
arrow.
Alternative dependencies
Alternative dependencies will be shown within a single node (a rectangular shape with horizontal lines
separating the packages).
An alternative dependency will be indicated by a single arrow, unless one or more of the dependencies are
versioned. In that case a separate arrow (ending at the relevant package) showing the version requirement
is drawn. Arrows for dependencies on a package in a set of alternatives will originate at the correct
package in the set, though in some cases this may be on the separation line between two alternatives.
If a package included in an alternative dependency also needs to be displayed separately or is also part
of some other alternative dependency set, its dependencies will only be included once, with the package's
first occurrence. For the secondary occurrences the package name will be shown between square brackets:
`[...]'.
See also the --show-installed option below.
Virtual packages
Virtual packages will be shown as an octagonal shape with a green inverted arrow from the providing
package(s).
If only a single package provides the virtual package, this package (and its dependencies) will be
displayed in the graph.
If there are multiple packages that provide the virtual package, they will be shown within a single node
with rounded corners but only if there are less than three (or the number set by the --max-providers
option). If there are more than that number, this will be indicated by an ellipsis (`...') in the node;
no individual packages will be shown but the number of providing packages is indicated alongside the
arrow. Dependencies of the providing packages will not be shown.
A regular dependency graph will by default also show any virtual packages provided by the requested
binary package.
Unknown packages
Packages that are listed as dependency, but that are unknown in the package database will be displayed
with a reddish shade. In the case of alternative dependencies, the package name will be shown between
question marks: `?...?'.
Package versions
If multiple versions of a package are available, the dependency information for the highest available
version will be used, with one exception. If the --show-installed option is used, the installed version
will be used for packages that are installed on the system.
Managing graph size and complexity
debtree offers several mechanisms to help reduce the size of dependency graphs of packages with large or
complex dependency trees. The first mechanism is to limit what types of dependencies are included, for
example excluding Recommended or Conflicting packages from the graph. The second mechanism is the
configuration of lists of skip and end packages; see the section CONFIGURATION below for details. The
last mechanism is to place a hard limit on the depth of the dependency tree.
It is not possible to include the dependencies of suggested packages. Doing so would in almost all cases
result in an explosion of the size of graphs.
For some packages it is unfortunately almost impossible to generate a usable dependency graph due to the
number of dependencies they have. This is often the case for meta packages, for example those for KDE or
GNOME.
OPTIONS
This program follows the usual GNU command line syntax, with long options starting with two dashes (`-').
An overview of supported options is included below.
--show-installed, -I
Show which packages are installed on the system.
The nodes for packages which are installed on the system will be colored light green. For
alternative dependencies, only installed packages will be included (an ellipsis is used to
indicate omitted alternatives); for unsatisfied alternative dependencies, all alternatives will be
included.
--show-rdeps, -R
Also show reverse dependencies of the package and any virtual packages it provides.
Reverse dependencies that are not installed will be colored light yellow; installed ones light
blue. Displaying reverse dependencies of type Suggests is not supported.
Use of the option --show-installed in combination with this option is recommended. See also the
options --rdeps-depth and --max-rdeps. This option is ignored if --build-dep is also specified.
--build-dep, -b
Show build dependencies instead of package dependencies.
Suggested packages will never be included in a build dependency graph. If there are alternative
packages to satisfy a dependency, normally only the first alternative will be shown. However, when
used in combination with the --show-installed option, all already installed alternatives will be
included for satisfied dependencies (unless the --no-alternatives option is also given).
--arch=architecture
Specify the architecture (or `all') for the build dependency graph. If the option --buildep option
is not present, this option will be ignored. Default is the architecture of the system on which
the command is being run.
If architecture `all' is specified, all build dependencies will be shown. If any build
dependencies have `architecture conditions', those will be displayed in a graph.
If an architecture is specified (including the default), only build dependencies that are relevant
for that architecture will be shown; build dependencies for other architectures will be ignored.
--with-suggests, -S
Include suggested packages; dependencies of suggested packages are never included.
--no-recommends
Don't show recommended packages.
This option will be ignored if used in combination with the --with-suggests option.
--no-alternatives
Only show the first package from a set of alternative dependencies. Effectively this shows what
package would be installed by default (in most cases).
--no-provides
Don't show virtual packages provided by the requested package.
--max-providers=number
When there are multiple packages providing a virtual package, only show the providing packages if
there are less than this number. Default is 3.
--no-versions
Don't show the versions for versioned dependencies.
--no-conflicts
Don't show unversioned conflicts.
--versioned-conflicts, -VC
Include versioned conflicts; by default only unversioned conflicts are shown.
This option will be ignored if used in combination with the --no-conflicts option.
--max-depth=number
Limit the number of levels of dependencies that is traversed.
This option sets a limit to the number of levels debtree will recurse when determining
dependencies. Packages at the specified level will be treated as end packages (see section
CONFIGURATION below).
The option can be used both to reduce the size of graphs.
--rdeps-depth=number
The maximum number of levels for reverse dependencies.
By default only one level is displayed. Use this option to display more levels. Implies
--show-rdeps.
--max-rdeps=number
Limit the display of indirect reverse dependencies.
When displaying multiple levels of reverse dependencies, a reverse dependency that itself has a
lot of reverse dependencies can really explode the graph. By default up to 5 indirect reverse
dependencies are shown individually.
--no-skip
Also display dependencies that are suppressed by default (e.g. libc6).
When selected, skip packages will be treated as end packages instead. This means that
dependencies that by default are not included in graphs, will now be shown, but their dependencies
will not. See also the section CONFIGURATION below.
--skiplist=file
File with the list of custom skip packages. This overrides global skiplist configuration. See
also the section CONFIGURATION.
--endlist=file
File with the list of custom end packages. This overrides global endlist configuration. See also
the section CONFIGURATION
--show-all
Display the full dependency tree.
When selected, all default limits in the form of end and skip packages are disabled and the full
dependency graph for the package will be generated. See also the section CONFIGURATION below.
This option implies the --no-skip option, but can be used in combination with the --max-depth
option. Note that this option does not affect the types of dependencies that are included.
--rotate, -r
Draw the graph top-town instead of left-to-right.
--condense
Activates an option of dot(1) that can help reduce the clutter in dense graphs by concentrating
lines (relationships) between packages together for parts of their paths.
--quiet, -q
Suppress any informational/warning messages.
--verbose, -v
Increase verbosity.
Displays additional informational and debug messages; can be repeated up to three times.
CONFIGURATION
debtree can be configured to limit the size and complexity of dependency graphs. This is done using two
lists:
/etc/debtree/skiplist, ~/.debtree/skiplist
List of skip packages. Packages included in this list are completely excluded from graphs. The
list should only contain dependencies that are so common that including them in graphs only
clutters the graph and does not really add any information. Examples are libc6 and zlib1g. If an
alternative dependency contains only skip packages it will be omitted; if it contains a mix of
skip and non-skip packages, the presence of the skip packages will be shown using an ellipsis
('...').
/etc/debtree/endlist, ~/.debtree/endlist
List of end packages. Packages included in this list are shown in the graph, but their
dependencies will not be shown. A diamond shape is used to indicate an end package; in the case of
alternative dependencies, the package name will be shown between braces: `{...}'.
Preferably only packages that offer a functionality that is somewhat distinct from its reverse
dependencies should be included in this list. In some cases it may be necessary to also include
packages because their dependency tree is just too big or complex.
If a list is present under the HOME directory of the user, that file will be used instead of the default
file in /etc/debtree/.
See also the options --no-skip, --show-all and --max-depth, --skiplist, --endlist.
EXAMPLES
Below are some basic usage examples for debtree. For more extensive examples of graphs and additional
information, please see the debtree website: https://salsa.debian.org/debian/debtree.
$ debtree dpkg >dpkg.dot
Generate the dependency graph for package dpkg and save the output to a file `dpkg.dot'.
$ dot -Tsvg -o dpkg.svg dpkg.dot
Use dot(1) to generate an SVG image from the `.dot' file.
$ debtree dpkg | dot -Tpng >dpkg.png
Generate the dependency graph for package dpkg as PNG image and save the resulting output to a
file.
$ debtree -b dpkg | dot -Tps | kghostview - &
Generate the build dependency graph for package dpkg in postscript format and view the result
using KDE's kghostview(1).
SEE ALSO
dot(1). prune(1). gvpr(1).
AUTHOR
Frans Pop <elendil@planet.nl>.
Debian Project 2009-09-12 DEBTREE(1)