NAME

       can_player - CAN data player

DESCRIPTION

       usage: player.py [-h] [-c CHANNEL]

              [-i
              {canalystii,cantact,etas,gs_usb,iscan,ixxat,kvaser,neousys,neovi,nican,nixnet,pcan,robotell,seeedstudio,serial,slcan,socketcan,socketcand,systec,udp_multicast,usb2can,vector,virtual}]
              [-b  BITRATE]  [--fd]  [--data_bitrate  DATA_BITRATE]  [-f  LOG_FILE]  [-v]  [--ignore-timestamps]
              [--error-frames] [-g GAP] [-s SKIP] ... input-file

       Replay CAN traffic.

   positional arguments:
       extra_args
              The remaining arguments will be used for  the  interface  and  logger/player  initialisation.  For
              example,  `-i  vector  -c  1  --app-name=MyCanApp`  is  the  equivalent  to  opening  the bus with
              `Bus('vector', channel=1, app_name='MyCanApp')

       input-file
              The file to replay. For supported types see can.LogReader.

   options:
       -h, --help
              show this help message and exit

       -c CHANNEL, --channel CHANNEL
              Most backend interfaces require some sort of channel.  For example with the serial  interface  the
              channel  might  be  a  rfcomm  device:  "/dev/rfcomm0". With the socketcan interface valid channel
              examples include: "can0", "vcan0".

       -i
       {canalystii,cantact,etas,gs_usb,iscan,ixxat,kvaser,neousys,neovi,nican,nixnet,pcan,robotell,seeedstudio,serial,slcan,socketcan,socketcand,systec,udp_multicast,usb2can,vector,virtual},
       --interface
       {canalystii,cantact,etas,gs_usb,iscan,ixxat,kvaser,neousys,neovi,nican,nixnet,pcan,robotell,seeedstudio,serial,slcan,socketcan,socketcand,systec,udp_multicast,usb2can,vector,virtual}
              Specify the backend CAN interface to use. If left blank, fall back to reading  from  configuration
              files.

       -b BITRATE, --bitrate BITRATE
              Bitrate to use for the CAN bus.

       --fd   Activate CAN-FD support

       --data_bitrate DATA_BITRATE
              Bitrate to use for the data phase in case of CAN-FD.

       -f LOG_FILE, --file_name LOG_FILE
              Path and base log filename, for supported types see can.LogReader.

       -v     Also print can frames to stdout. You can add several of these to enable debugging

       --ignore-timestamps
              Ignore timestamps (send all frames immediately with minimum gap between frames)

       --error-frames
              Also send error frames to the interface.

       -g GAP, --gap GAP
              <s> minimum time between replayed frames

       -s SKIP, --skip SKIP
              <s> skip gaps greater than 's' seconds

can_player 4.3.1                                  December 2023                                    CAN_PLAYER(1)