Provided by: freebsd-manpages_12.2-1_all 
NAME
crypto — API for cryptographic services in the kernel
SYNOPSIS
#include <opencrypto/cryptodev.h>
int32_t
crypto_get_driverid(device_t dev, size_t session_size, int flags);
int
crypto_register(uint32_t driverid, int alg, uint16_t maxoplen, uint32_t flags);
int
crypto_kregister(uint32_t driverid, int kalg, uint32_t flags);
int
crypto_unregister(uint32_t driverid, int alg);
int
crypto_unregister_all(uint32_t driverid);
void
crypto_done(struct cryptop *crp);
void
crypto_kdone(struct cryptkop *krp);
int
crypto_find_driver(const char *match);
int
crypto_newsession(crypto_session_t *cses, struct cryptoini *cri, int crid);
int
crypto_freesession(crypto_session_t cses);
int
crypto_dispatch(struct cryptop *crp);
int
crypto_kdispatch(struct cryptkop *krp);
int
crypto_unblock(uint32_t driverid, int what);
struct cryptop *
crypto_getreq(int num);
void
crypto_freereq(struct cryptop *crp);
#define CRYPTO_SYMQ 0x1
#define CRYPTO_ASYMQ 0x2
#define EALG_MAX_BLOCK_LEN 16
struct cryptoini {
int cri_alg;
int cri_klen;
int cri_mlen;
caddr_t cri_key;
uint8_t cri_iv[EALG_MAX_BLOCK_LEN];
struct cryptoini *cri_next;
};
struct cryptodesc {
int crd_skip;
int crd_len;
int crd_inject;
int crd_flags;
struct cryptoini CRD_INI;
#define crd_iv CRD_INI.cri_iv
#define crd_key CRD_INI.cri_key
#define crd_alg CRD_INI.cri_alg
#define crd_klen CRD_INI.cri_klen
struct cryptodesc *crd_next;
};
struct cryptop {
TAILQ_ENTRY(cryptop) crp_next;
crypto_session_t crp_session;
int crp_ilen;
int crp_olen;
int crp_etype;
int crp_flags;
caddr_t crp_buf;
caddr_t crp_opaque;
struct cryptodesc *crp_desc;
int (*crp_callback) (struct cryptop *);
caddr_t crp_mac;
};
struct crparam {
caddr_t crp_p;
u_int crp_nbits;
};
#define CRK_MAXPARAM 8
struct cryptkop {
TAILQ_ENTRY(cryptkop) krp_next;
u_int krp_op; /* ie. CRK_MOD_EXP or other */
u_int krp_status; /* return status */
u_short krp_iparams; /* # of input parameters */
u_short krp_oparams; /* # of output parameters */
uint32_t krp_hid;
struct crparam krp_param[CRK_MAXPARAM];
int (*krp_callback)(struct cryptkop *);
};
DESCRIPTION
crypto is a framework for drivers of cryptographic hardware to register with the kernel so “consumers”
(other kernel subsystems, and users through the /dev/crypto device) are able to make use of it. Drivers
register with the framework the algorithms they support, and provide entry points (functions) the
framework may call to establish, use, and tear down sessions. Sessions are used to cache cryptographic
information in a particular driver (or associated hardware), so initialization is not needed with every
request. Consumers of cryptographic services pass a set of descriptors that instruct the framework (and
the drivers registered with it) of the operations that should be applied on the data (more than one
cryptographic operation can be requested).
Keying operations are supported as well. Unlike the symmetric operators described above, these
sessionless commands perform mathematical operations using input and output parameters.
Since the consumers may not be associated with a process, drivers may not sleep(9). The same holds for
the framework. Thus, a callback mechanism is used to notify a consumer that a request has been completed
(the callback is specified by the consumer on a per-request basis). The callback is invoked by the
framework whether the request was successfully completed or not. An error indication is provided in the
latter case. A specific error code, EAGAIN, is used to indicate that a session handle has changed and
that the request may be re-submitted immediately with the new session. Errors are only returned to the
invoking function if not enough information to call the callback is available (meaning, there was a fatal
error in verifying the arguments). For session initialization and teardown no callback mechanism is
used.
The crypto_find_driver() returns the driver id of the device whose name matches match. match can either
be the exact name of a device including the unit or the driver name without a unit. In the latter case,
the id of the first device with the matching driver name is returned. If no matching device is found,
the value -1 is returned.
The crypto_newsession() routine is called by consumers of cryptographic services (such as the ipsec(4)
stack) that wish to establish a new session with the framework. The cri argument points to a cryptoini
structure containing all the necessary information for the driver to establish the session. The crid
argument is either a specific driver id or a bitmask of flags. The flags are CRYPTOCAP_F_HARDWARE, to
select hardware devices, or CRYPTOCAP_F_SOFTWARE, to select software devices. If both are specified,
hardware devices are preferred over software devices. On success, the opaque session handle of the new
session will be stored in *cses. The cryptoini structure pointed to by cri contains these fields:
cri_alg An algorithm identifier. Currently supported algorithms are:
CRYPTO_AES_128_NIST_GMAC
CRYPTO_AES_192_NIST_GMAC
CRYPTO_AES_256_NIST_GMAC
CRYPTO_AES_CBC
CRYPTO_AES_CCM_16
CRYPTO_AES_CCM_CBC_MAC
CRYPTO_AES_ICM
CRYPTO_AES_NIST_GCM_16
CRYPTO_AES_NIST_GMAC
CRYPTO_AES_XTS
CRYPTO_ARC4
CRYPTO_BLAKE2B
CRYPTO_BLAKE2S
CRYPTO_BLF_CBC
CRYPTO_CAMELLIA_CBC
CRYPTO_CAST_CBC
CRYPTO_CHACHA20
CRYPTO_DEFLATE_COMP
CRYPTO_DES_CBC
CRYPTO_3DES_CBC
CRYPTO_MD5
CRYPTO_MD5_HMAC
CRYPTO_MD5_KPDK
CRYPTO_NULL_HMAC
CRYPTO_NULL_CBC
CRYPTO_POLY1305
CRYPTO_RIPEMD160
CRYPTO_RIPEMD160_HMAC
CRYPTO_SHA1
CRYPTO_SHA1_HMAC
CRYPTO_SHA1_KPDK
CRYPTO_SHA2_224
CRYPTO_SHA2_224_HMAC
CRYPTO_SHA2_256
CRYPTO_SHA2_256_HMAC
CRYPTO_SHA2_384
CRYPTO_SHA2_384_HMAC
CRYPTO_SHA2_512
CRYPTO_SHA2_512_HMAC
CRYPTO_SKIPJACK_CBC
cri_klen For variable-size key algorithms, the length of the key in bits.
cri_mlen If non-zero, truncate the calculated hash to this many bytes.
cri_key The key to be used.
cri_iv An explicit initialization vector if it does not prefix the data. This field is ignored during
initialization (crypto_newsession). If no IV is explicitly passed (see below on details), a
random IV is used by the device driver processing the request.
cri_next Pointer to another cryptoini structure. This is used to establish dual-algorithm sessions,
such as combining a cipher with a MAC.
The cryptoini structure and its contents will not be modified or referenced by the framework or any
cryptographic drivers. The memory associated with cri can be released once crypto_newsession() returns.
crypto_freesession() is called with the session handle returned by crypto_newsession() to free the
session.
crypto_dispatch() is called to process a request. The various fields in the cryptop structure are:
crp_session The session handle.
crp_ilen The total length in bytes of the buffer to be processed.
crp_olen On return, contains the total length of the result. For symmetric crypto operations, this
will be the same as the input length. This will be used if the framework needs to allocate
a new buffer for the result (or for re-formatting the input).
crp_callback Callback routine invoked when a request is completed via crypto_done(). The callback
routine should inspect the crp_etype to determine if the request was successfully
completed.
crp_etype The error type, if any errors were encountered, or zero if the request was successfully
processed. If the EAGAIN error code is returned, the session handle has changed (and has
been recorded in the crp_session field). The consumer should record the new session handle
and use it in all subsequent requests. In this case, the request may be re-submitted
immediately. This mechanism is used by the framework to perform session migration (move a
session from one driver to another, because of availability, performance, or other
considerations).
This field is only valid in the context of the callback routine specified by crp_callback.
Errors are returned to the invoker of crypto_process() only when enough information is not
present to call the callback routine (i.e., if the pointer passed is NULL or if no callback
routine was specified).
crp_flags A bitmask of flags associated with this request. Currently defined flags are:
CRYPTO_F_IMBUF The buffer is an mbuf chain pointed to by crp_mbuf.
CRYPTO_F_IOV The buffer is a uio structure pointed to by crp_uio.
CRYPTO_F_BATCH Batch operation if possible.
CRYPTO_F_CBIMM Do callback immediately instead of doing it from a dedicated kernel
thread.
CRYPTO_F_DONE Operation completed.
CRYPTO_F_CBIFSYNC Do callback immediately if operation is synchronous (that the driver
specified the CRYPTOCAP_F_SYNC flag).
CRYPTO_F_ASYNC Try to do the crypto operation in a pool of workers if the operation is
synchronous (that is, if the driver specified the CRYPTOCAP_F_SYNC
flag). It aims to speed up processing by dispatching crypto operations
on different processors.
CRYPTO_F_ASYNC_KEEPORDER
Dispatch callbacks in the same order they are posted. Only relevant if
the CRYPTO_F_ASYNC flag is set and if the operation is synchronous.
crp_buf Data buffer unless CRYPTO_F_IMBUF or CRYPTO_F_IOV is set in crp_flags. The length in bytes
is set in crp_ilen.
crp_mbuf Data buffer mbuf chain when CRYPTO_F_IMBUF is set in crp_flags.
crp_uio struct uio data buffer when CRYPTO_F_IOV is set in crp_flags.
crp_opaque Cookie passed through the crypto framework untouched. It is intended for the invoking
application's use.
crp_desc A linked list of descriptors. Each descriptor provides information about what type of
cryptographic operation should be done on the input buffer. The various fields are:
crd_iv When the flag CRD_F_IV_EXPLICIT is set, this field contains the IV.
crd_key When the CRD_F_KEY_EXPLICIT flag is set, the crd_key points to a buffer with
encryption or authentication key.
crd_alg An algorithm to use. Must be the same as the one given at newsession time.
crd_klen The crd_key key length.
crd_skip The offset in the input buffer where processing should start.
crd_len How many bytes, after crd_skip, should be processed.
crd_inject The crd_inject field specifies an offset in bytes from the beginning of the
buffer. For encryption algorithms, this may be where the IV will be inserted
when encrypting or where the IV may be found for decryption (subject to
crd_flags). For MAC algorithms, this is where the result of the keyed hash
will be inserted.
crd_flags The following flags are defined:
CRD_F_ENCRYPT
For encryption algorithms, this bit is set when encryption is required
(when not set, decryption is performed).
CRD_F_IV_PRESENT
For encryption, if this bit is not set the IV used to encrypt the packet
will be written at the location pointed to by crd_inject. The IV length
is assumed to be equal to the blocksize of the encryption algorithm. For
encryption, if this bit is set, nothing is done. For decryption, this
flag has no meaning. Applications that do special “IV cooking”, such as
the half-IV mode in ipsec(4), can use this flag to indicate that the IV
should not be written on the packet. This flag is typically used in
conjunction with the CRD_F_IV_EXPLICIT flag.
CRD_F_IV_EXPLICIT
This bit is set when the IV is explicitly provided by the consumer in the
crd_iv field. Otherwise, for encryption operations the IV is provided for
by the driver used to perform the operation, whereas for decryption
operations the offset of the IV is provided by the crd_inject field. This
flag is typically used when the IV is calculated “on the fly” by the
consumer, and does not precede the data.
CRD_F_KEY_EXPLICIT
For encryption and authentication (MAC) algorithms, this bit is set when
the key is explicitly provided by the consumer in the crd_key field for
the given operation. Otherwise, the key is taken at newsession time from
the cri_key field. As calculating the key schedule may take a while, it
is recommended that often used keys are given their own session.
CRD_F_COMP
For compression algorithms, this bit is set when compression is required
(when not set, decompression is performed).
CRD_INI This cryptoini structure will not be modified by the framework or the device
drivers. Since this information accompanies every cryptographic operation
request, drivers may re-initialize state on-demand (typically an expensive
operation). Furthermore, the cryptographic framework may re-route requests as
a result of full queues or hardware failure, as described above.
crd_next Point to the next descriptor. Linked operations are useful in protocols such
as ipsec(4), where multiple cryptographic transforms may be applied on the same
block of data.
crypto_getreq() allocates a cryptop structure with a linked list of num cryptodesc structures.
crypto_freereq() deallocates a structure cryptop and any cryptodesc structures linked to it. Note that
it is the responsibility of the callback routine to do the necessary cleanups associated with the opaque
field in the cryptop structure.
crypto_kdispatch() is called to perform a keying operation. The various fields in the cryptkop structure
are:
krp_op Operation code, such as CRK_MOD_EXP.
krp_status Return code. This errno-style variable indicates whether lower level reasons for operation
failure.
krp_iparams Number of input parameters to the specified operation. Note that each operation has a
(typically hardwired) number of such parameters.
krp_oparams Number of output parameters from the specified operation. Note that each operation has a
(typically hardwired) number of such parameters.
krp_kvp An array of kernel memory blocks containing the parameters.
krp_hid Identifier specifying which low-level driver is being used.
krp_callback Callback called on completion of a keying operation.
DRIVER-SIDE API
The crypto_get_driverid(), crypto_get_driver_session(), crypto_register(), crypto_kregister(),
crypto_unregister(), crypto_unblock(), and crypto_done() routines are used by drivers that provide
support for cryptographic primitives to register and unregister with the kernel crypto services
framework.
Drivers must first use the crypto_get_driverid() function to acquire a driver identifier, specifying the
flags as an argument. One of CRYPTOCAP_F_SOFTWARE or CRYPTOCAP_F_HARDWARE must be specified. The
CRYPTOCAP_F_SYNC may also be specified, and should be specified if the driver does all of it's operations
synchronously. Drivers must pass the size of their session structure as the second argument. An
appropriately sized memory will be allocated by the framework, zeroed, and passed to the driver's
newsession() method.
For each algorithm the driver supports, it must then call crypto_register(). The first two arguments are
the driver and algorithm identifiers. The next two arguments specify the largest possible operator
length (in bits, important for public key operations) and flags for this algorithm.
crypto_unregister() is called by drivers that wish to withdraw support for an algorithm. The two
arguments are the driver and algorithm identifiers, respectively. Typically, drivers for PCMCIA crypto
cards that are being ejected will invoke this routine for all algorithms supported by the card.
crypto_unregister_all() will unregister all algorithms registered by a driver and the driver will be
disabled (no new sessions will be allocated on that driver, and any existing sessions will be migrated to
other drivers). The same will be done if all algorithms associated with a driver are unregistered one by
one. After a call to crypto_unregister_all() there will be no threads in either the newsession or
freesession function of the driver.
The calling convention for the driver-supplied routines are:
int (*newsession)(device_t, crypto_session_t, struct cryptoini *);
void (*freesession)(device_t, crypto_session_t);
int (*process)(device_t, struct cryptop *, int);
int (*kprocess)(device_t, struct cryptkop *, int);
On invocation, the first argument to all routines is the device_t that was provided to
crypto_get_driverid(). The second argument to newsession() is the opaque session handle for the new
session. The third argument is identical to that of crypto_newsession().
Drivers obtain a pointer to their session memory by invoking crypto_get_driver_session() on the opaque
crypto_session_t handle.
The freesession() routine takes as arguments the opaque data value and the session handle. It should
clear any context associated with the session (clear hardware registers, memory, etc.). If no resources
need to be released other than the contents of session memory, the method is optional. The crypto
framework will zero and release the allocated session memory (after running the freesession() method, if
one exists).
The process() routine is invoked with a request to perform crypto processing. This routine must not
block or sleep, but should queue the request and return immediately or process the request to completion.
In case of an unrecoverable error, the error indication must be placed in the crp_etype field of the
cryptop structure. When the request is completed, or an error is detected, the process() routine must
invoke crypto_done(). Session migration may be performed, as mentioned previously.
In case of a temporary resource exhaustion, the process() routine may return ERESTART in which case the
crypto services will requeue the request, mark the driver as “blocked”, and stop submitting requests for
processing. The driver is then responsible for notifying the crypto services when it is again able to
process requests through the crypto_unblock() routine. This simple flow control mechanism should only be
used for short-lived resource exhaustion as it causes operations to be queued in the crypto layer. Doing
so is preferable to returning an error in such cases as it can cause network protocols to degrade
performance by treating the failure much like a lost packet.
The kprocess() routine is invoked with a request to perform crypto key processing. This routine must not
block, but should queue the request and return immediately. Upon processing the request, the callback
routine should be invoked. In case of an unrecoverable error, the error indication must be placed in the
krp_status field of the cryptkop structure. When the request is completed, or an error is detected, the
kprocess() routine should invoked crypto_kdone().
RETURN VALUES
crypto_register(), crypto_kregister(), crypto_unregister(), crypto_newsession(), crypto_freesession(),
and crypto_unblock() return 0 on success, or an error code on failure. crypto_get_driverid() returns a
non-negative value on error, and -1 on failure. crypto_getreq() returns a pointer to a cryptop structure
and NULL on failure. crypto_dispatch() returns EINVAL if its argument or the callback function was NULL,
and 0 otherwise. The callback is provided with an error code in case of failure, in the crp_etype field.
FILES
sys/opencrypto/crypto.c most of the framework code
SEE ALSO
crypto(4), ipsec(4), crypto(7), malloc(9), sleep(9)
HISTORY
The cryptographic framework first appeared in OpenBSD 2.7 and was written by Angelos D. Keromytis
<angelos@openbsd.org>.
BUGS
The framework currently assumes that all the algorithms in a crypto_newsession() operation must be
available by the same driver. If that is not the case, session initialization will fail.
The framework also needs a mechanism for determining which driver is best for a specific set of
algorithms associated with a session. Some type of benchmarking is in order here.
Multiple instances of the same algorithm in the same session are not supported.
Debian December 17, 2019 CRYPTO(9)