Provided by: perl-doc_5.38.2-3.2ubuntu0.1_all 
NAME
utf8 - Perl pragma to enable/disable UTF-8 (or UTF-EBCDIC) in source code
SYNOPSIS
use utf8;
no utf8;
# Convert the internal representation of a Perl scalar to/from UTF-8.
$num_octets = utf8::upgrade($string);
$success = utf8::downgrade($string[, $fail_ok]);
# Change each character of a Perl scalar to/from a series of
# characters that represent the UTF-8 bytes of each original character.
utf8::encode($string); # "\x{100}" becomes "\xc4\x80"
utf8::decode($string); # "\xc4\x80" becomes "\x{100}"
# Convert a code point from the platform native character set to
# Unicode, and vice-versa.
$unicode = utf8::native_to_unicode(ord('A')); # returns 65 on both
# ASCII and EBCDIC
# platforms
$native = utf8::unicode_to_native(65); # returns 65 on ASCII
# platforms; 193 on
# EBCDIC
$flag = utf8::is_utf8($string); # since Perl 5.8.1
$flag = utf8::valid($string);
DESCRIPTION
The "use utf8" pragma tells the Perl parser to allow UTF-8 in the program text in the current lexical
scope. The "no utf8" pragma tells Perl to switch back to treating the source text as literal bytes in
the current lexical scope. (On EBCDIC platforms, technically it is allowing UTF-EBCDIC, and not UTF-8,
but this distinction is academic, so in this document the term UTF-8 is used to mean both).
Do not use this pragma for anything else than telling Perl that your script is written in UTF-8. The
utility functions described below are directly usable without "use utf8;".
Because it is not possible to reliably tell UTF-8 from native 8 bit encodings, you need either a Byte
Order Mark at the beginning of your source code, or "use utf8;", to instruct perl.
When UTF-8 becomes the standard source format, this pragma will effectively become a no-op.
See also the effects of the "-C" switch and its cousin, the "PERL_UNICODE" environment variable, in
perlrun.
Enabling the "utf8" pragma has the following effect:
• Bytes in the source text that are not in the ASCII character set will be treated as being part of a
literal UTF-8 sequence. This includes most literals such as identifier names, string constants, and
constant regular expression patterns.
Note that if you have non-ASCII, non-UTF-8 bytes in your script (for example embedded Latin-1 in your
string literals), "use utf8" will be unhappy. If you want to have such bytes under "use utf8", you can
disable this pragma until the end the block (or file, if at top level) by "no utf8;".
Utility functions
The following functions are defined in the "utf8::" package by the Perl core. You do not need to say
"use utf8" to use these and in fact you should not say that unless you really want to have UTF-8 source
code.
• "$num_octets = utf8::upgrade($string)"
(Since Perl v5.8.0) Converts in-place the internal representation of the string from an octet
sequence in the native encoding (Latin-1 or EBCDIC) to UTF-8. The logical character sequence itself
is unchanged. If $string is already upgraded, then this is a no-op. Returns the number of octets
necessary to represent the string as UTF-8. Since Perl v5.38, if $string is "undef" no action is
taken; prior to that, it would be converted to be defined and zero-length.
If your code needs to be compatible with versions of perl without "use feature 'unicode_strings';",
you can force Unicode semantics on a given string:
# force unicode semantics for $string without the
# "unicode_strings" feature
utf8::upgrade($string);
For example:
# without explicit or implicit use feature 'unicode_strings'
my $x = "\xDF"; # LATIN SMALL LETTER SHARP S
$x =~ /ss/i; # won't match
my $y = uc($x); # won't convert
utf8::upgrade($x);
$x =~ /ss/i; # matches
my $z = uc($x); # converts to "SS"
Note that this function does not handle arbitrary encodings; use Encode instead.
• "$success = utf8::downgrade($string[, $fail_ok])"
(Since Perl v5.8.0) Converts in-place the internal representation of the string from UTF-8 to the
equivalent octet sequence in the native encoding (Latin-1 or EBCDIC). The logical character sequence
itself is unchanged. If $string is already stored as native 8 bit, then this is a no-op. Can be used
to make sure that the UTF-8 flag is off, e.g. when you want to make sure that the substr() or
length() function works with the usually faster byte algorithm.
Fails if the original UTF-8 sequence cannot be represented in the native 8 bit encoding. On failure
dies or, if the value of $fail_ok is true, returns false.
Returns true on success.
If your code expects an octet sequence this can be used to validate that you've received one:
# throw an exception if not representable as octets
utf8::downgrade($string)
# or do your own error handling
utf8::downgrade($string, 1) or die "string must be octets";
Note that this function does not handle arbitrary encodings; use Encode instead.
• utf8::encode($string)
(Since Perl v5.8.0) Converts in-place the character sequence to the corresponding octet sequence in
Perl's extended UTF-8. That is, every (possibly wide) character gets replaced with a sequence of one
or more characters that represent the individual UTF-8 bytes of the character. The UTF8 flag is
turned off. Returns nothing.
my $x = "\x{100}"; # $x contains one character, with ord 0x100
utf8::encode($x); # $x contains two characters, with ords (on
# ASCII platforms) 0xc4 and 0x80. On EBCDIC
# 1047, this would instead be 0x8C and 0x41.
Similar to:
use Encode;
$x = Encode::encode("utf8", $x);
Note that this function does not handle arbitrary encodings; use Encode instead.
• "$success = utf8::decode($string)"
(Since Perl v5.8.0) Attempts to convert in-place the octet sequence encoded in Perl's extended UTF-8
to the corresponding character sequence. That is, it replaces each sequence of characters in the
string whose ords represent a valid (extended) UTF-8 byte sequence, with the corresponding single
character. The UTF-8 flag is turned on only if the source string contains multiple-byte UTF-8
characters. If $string is invalid as extended UTF-8, returns false; otherwise returns true.
my $x = "\xc4\x80"; # $x contains two characters, with ords
# 0xc4 and 0x80
utf8::decode($x); # On ASCII platforms, $x contains one char,
# with ord 0x100. Since these bytes aren't
# legal UTF-EBCDIC, on EBCDIC platforms, $x is
# unchanged and the function returns FALSE.
my $y = "\xc3\x83\xc2\xab"; This has been encoded twice; this
# example is only for ASCII platforms
utf8::decode($y); # Converts $y to \xc3\xab, returns TRUE;
utf8::decode($y); # Further converts to \xeb, returns TRUE;
utf8::decode($y); # Returns FALSE, leaves $y unchanged
Note that this function does not handle arbitrary encodings; use Encode instead.
• "$unicode = utf8::native_to_unicode($code_point)"
(Since Perl v5.8.0) This takes an unsigned integer (which represents the ordinal number of a
character (or a code point) on the platform the program is being run on) and returns its Unicode
equivalent value. Since ASCII platforms natively use the Unicode code points, this function returns
its input on them. On EBCDIC platforms it converts from EBCDIC to Unicode.
A meaningless value will currently be returned if the input is not an unsigned integer.
Since Perl v5.22.0, calls to this function are optimized out on ASCII platforms, so there is no
performance hit in using it there.
• "$native = utf8::unicode_to_native($code_point)"
(Since Perl v5.8.0) This is the inverse of utf8::native_to_unicode(), converting the other direction.
Again, on ASCII platforms, this returns its input, but on EBCDIC platforms it will find the native
platform code point, given any Unicode one.
A meaningless value will currently be returned if the input is not an unsigned integer.
Since Perl v5.22.0, calls to this function are optimized out on ASCII platforms, so there is no
performance hit in using it there.
• "$flag = utf8::is_utf8($string)"
(Since Perl 5.8.1) Test whether $string is marked internally as encoded in UTF-8. Functionally the
same as Encode::is_utf8($string).
Typically only necessary for debugging and testing, if you need to dump the internals of an SV,
Devel::Peek's Dump() provides more detail in a compact form.
If you still think you need this outside of debugging, testing or dealing with filenames, you should
probably read perlunitut and "What is "the UTF8 flag"?" in perlunifaq.
Don't use this flag as a marker to distinguish character and binary data: that should be decided for
each variable when you write your code.
To force unicode semantics in code portable to perl 5.8 and 5.10, call utf8::upgrade($string)
unconditionally.
• "$flag = utf8::valid($string)"
[INTERNAL] Test whether $string is in a consistent state regarding UTF-8. Will return true if it is
well-formed Perl extended UTF-8 and has the UTF-8 flag on or if $string is held as bytes (both these
states are 'consistent'). The main reason for this routine is to allow Perl's test suite to check
that operations have left strings in a consistent state.
"utf8::encode" is like "utf8::upgrade", but the UTF8 flag is cleared. See perlunicode, and the C API
functions "sv_utf8_upgrade", ""sv_utf8_downgrade" in perlapi", ""sv_utf8_encode" in perlapi", and
""sv_utf8_decode" in perlapi", which are wrapped by the Perl functions "utf8::upgrade",
"utf8::downgrade", "utf8::encode" and "utf8::decode". Also, the functions "utf8::is_utf8",
"utf8::valid", "utf8::encode", "utf8::decode", "utf8::upgrade", and "utf8::downgrade" are actually
internal, and thus always available, without a "require utf8" statement.
BUGS
Some filesystems may not support UTF-8 file names, or they may be supported incompatibly with Perl.
Therefore UTF-8 names that are visible to the filesystem, such as module names may not work.
SEE ALSO
perlunitut, perluniintro, perlrun, bytes, perlunicode
perl v5.38.2 2025-04-08 utf8(3perl)