Provided by: libconfig-apacheformat-perl_1.2-6_all 
NAME
Config::ApacheFormat - use Apache format config files
SYNOPSIS
Config files used with this module are in Apache's format:
# comment here
RootDir /path/foo
LogDir /path/foo/log
Colors red green orange blue \
black teal
<Directory /path/foo>
# override Colors inside block
Colors red blue black
</Directory>
Code to use this config file might look like:
use Config::ApacheFormat;
# load a conf file
my $config = Config::ApacheFormat->new();
$config->read("my.conf");
# access some parameters
$root_dir = $config->get("RootDir");
$log_dir = $config->get("LogDir");
@colors = $config->get("colors");
# using the autoloaded methods
$config->autoload_support(1);
$root_dir = $config->RootDir;
$log_dir = $config->logdir;
# access parameters inside a block
my $block = $config->block(Directory => "/path/foo");
@colors = $block->get("colors");
$root_dir = $block->get("root_dir");
DESCRIPTION
This module is designed to parse a configuration file in the same syntax used by the Apache web server
(see http://httpd.apache.org for details). This allows you to build applications which can be easily
managed by experienced Apache admins. Also, by using this module, you'll benefit from the support for
nested blocks with built-in parameter inheritance. This can greatly reduce the amount or repeated
information in your configuration files.
A good reference to the Apache configuration file format can be found here:
http://httpd.apache.org/docs-2.0/configuring.html
To quote from that document, concerning directive syntax:
Apache configuration files contain one directive per line. The
back-slash "\" may be used as the last character on a line to
indicate that the directive continues onto the next line. There must
be no other characters or white space between the back-slash and the
end of the line.
Directives in the configuration files are case-insensitive, but
arguments to directives are often case sensitive. Lines that begin
with the hash character "#" are considered comments, and are
ignored. Comments may not be included on a line after a configuration
directive. Blank lines and white space occurring before a directive
are ignored, so you may indent directives for clarity.
And block notation:
Directives placed in the main configuration files apply to the entire
server. If you wish to change the configuration for only a part of the
server, you can scope your directives by placing them in <Directory>,
<DirectoryMatch>, <Files>, <FilesMatch>, <Location>, and
<LocationMatch> sections. These sections limit the application of the
directives which they enclose to particular filesystem locations or
URLs. They can also be nested, allowing for very fine grained
configuration.
This module will parse actual Apache configuration files, but you will need to set some options to non-
default values. See "Parsing a Real Apache Config File".
METHODS
$config = Config::ApacheFormat->new(opt => "value")
This method creates an object that can then be used to read configuration files. It does not actually
read any files; for that, use the "read()" method below. The object supports the following
attributes, all of which may be set through "new()":
inheritance_support
Set this to 0 to turn off the inheritance feature. Block inheritance means that variables
declared outside a block are available from inside the block unless overridden. Defaults to 1.
include_support
When this is set to 1, the directive "Include" will be treated specially by the parser. It will
cause the value to be treated as a filename and that filename will be read in. If you use
"Include" with a directory, every file in that directory will be included. This matches Apache's
behavior and allows users to break up configuration files into multiple, possibly shared, pieces.
Defaults to 1.
autoload_support
Set this to 1 and all your directives will be available as object methods. So instead of:
$config->get("foo");
You can write:
$config->foo;
Defaults to 0.
case_sensitive
Set this to 1 to preserve the case of directive names. Otherwise, all names will be "lc()"ed and
matched case-insensitively. Defaults to 0.
fix_booleans
If set to 1, then during parsing, the strings "Yes", "On", and "True" will be converted to 1, and
the strings "No", "Off", and "False" will be converted to 0. This allows you to more easily use
"get()" in conditional statements.
For example:
# httpd.conf
UseCanonicalName On
Then in Perl:
$config = Config::ApacheFormat->new(fix_booleans => 1);
$config->read("httpd.conf");
if ($config->get("UseCanonicalName")) {
# this will get executed if set to Yes/On/True
}
This option defaults to 0.
expand_vars
If set, then you can use variable expansion in your config file by prefixing directives with a
"$". Hopefully this seems logical to you:
Website http://my.own.dom
JScript $Website/js
Images $Website/images
Undefined variables in your config file will result in an error. To use a literal "$", simply
prefix it with a "\" (backslash). Like in Perl, you can use brackets to delimit the variables
more precisely:
Nickname Rob
Fullname ${Nickname}ert
Since only scalars are supported, if you use a multi-value, you will only get back the first one:
Options Plus Minus "About the Same"
Values $Options
In this examples, "Values" will become "Plus". This is seldom a limitation since in most cases,
variable subsitution is used like the first example shows. This option defaults to 0.
setenv_vars
If this is set to 1, then the special "SetEnv" directive will be set values in the environment
via %ENV. Also, the special "UnSetEnv" directive will delete environment variables.
For example:
# $ENV{PATH} = "/usr/sbin:/usr/bin"
SetEnv PATH "/usr/sbin:/usr/bin"
# $ENV{MY_SPECIAL_VAR} = 10
SetEnv MY_SPECIAL_VAR 10
# delete $ENV{THIS}
UnsetEnv THIS
This option defaults to 0.
valid_directives
If you provide an array of directive names then syntax errors will be generated during parsing
for invalid directives. Otherwise, any directive name will be accepted. For example, to only
allow directives called "Bar" and "Bif":
$config = Config::ApacheFormat->new(
valid_directives => [qw(Bar Bif)],
);
valid_blocks
If you provide an array of block names then syntax errors will be generated during parsing for
invalid blocks. Otherwise, any block name will be accepted. For example, to only allow
"Directory" and "Location" blocks in your config file:
$config = Config::ApacheFormat->new(
valid_blocks => [qw(Directory Location)],
);
include_directives
This directive controls the name of the include directive. By default it is "['Include']", but
you can set it to any list of directive names.
root_directive
This controls what the root directive is, if any. If you set this to the name of a directive it
will be used as a base directory for "Include" processing. This mimics the behavior of
"ServerRoot" in real Apache config files, and as such you'll want to set it to 'ServerRoot' when
parsing an Apache config. The default is "undef".
hash_directives
This determines which directives (if any) should be parsed so that the first value is actually a
key into the remaining values. For example, "AddHandler" is such a directive.
AddHandler cgi-script .cgi .sh
AddHandler server-parsed .shtml
To parse this correctly, use:
$config = Config::ApacheFormat->new(
hash_directives => [qw(AddHandler PerlSetVar)]
);
Then, use the two-argument form of "get()":
@values = $config->get(AddHandler => 'cgi-script');
This allows you to access each directive individually, which is needed to correctly handle
certain special-case Apache settings.
duplicate_directives
This option controls how duplicate directives are handled. By default, if multiple directives of
the same name are encountered, the last one wins:
Port 8080
# ...
Port 5053
In this case, the directive "Port" would be set to the last value, 5053. This is useful because
it allows you to include other config files, which you can then override:
# default setup
Include /my/app/defaults.conf
# override port
Port 5053
In addition to this default behavior, "Config::ApacheFormat" also supports the following modes:
last - the value from the last one is kept (default)
error - duplicate directives result in an error
combine - combine values of duplicate directives together
These should be self-explanatory. If set to "error", any duplicates will result in an error. If
set to "last" (the default), the last value wins. If set to "combine", then duplicate directives
are combined together, just like they had been specified on the same line.
All of the above attributes are also available as accessor methods. Thus, this:
$config = Config::ApacheFormat->new(inheritance_support => 0,
include_support => 1);
Is equivalent to:
$config = Config::ApacheFormat->new();
$config->inheritance_support(0);
$config->include_support(1);
$config->read("my.conf");
$config->read(\*FILE);
Reads a configuration file into the config object. You must pass either the path of the file to be
read or a reference to an open filehandle. If an error is encountered while reading the file, this
method will die().
Calling read() more than once will add the new configuration values from another source, overwriting
any conflicting values. Call clear() first if you want to read a new set from scratch.
"$value = $config->get("var_name")"
"@vals = $config->get("list_name")"
"$value = $config->get("hash_var_name", "key")"
Returns values from the configuration file. If the directive contains a single value, it will be
returned. If the directive contains a list of values then they will be returned as a list. If the
directive does not exist in the configuration file then nothing will be returned (undef in scalar
context, empty list in list context).
For example, given this confiuration file:
Foo 1
Bar bif baz bop
The following code would work as expected:
my $foo = $config->get("Foo"); # $foo = 1
my @bar = $config->get("Bar"); # @bar = ("bif", "baz", "bop")
If the name is the name of a block tag in the configuration file then a list of available block
specifiers will be returned. For example, given this configuration file:
<Site big>
Size 10
</Site>
<Site small>
Size 1
</Site>
This call:
@sites = $config->get("Site");
Will return "([ Site =" "big"], [ Site => "small" ])>. These arrays can then be used with the
block() method described below.
If the directive was included in the file but did not have a value, 1 is returned by get().
Calling get() with no arguments will return the names of all available directives.
Directives declared in "hash_directives" require a key value:
$handler = $config->get("AddHandler", "cgi-script");
"directive()" is available as an alias for "get()".
$block = $config->block("BlockName")
$block = $config->block(Directory => "/foo/bar")
$block = $config->block(Directory => "~" => "^.*/bar")
This method returns a Config::ApacheFormat object used to access the values inside a block.
Parameters specified within the block will be available. Also, if inheritance is turned on (the
default), values set outside the block that are not overwritten inside the block will also be
available. For example, given this file:
MaxSize 100
<Site "big">
Size 10
</Site>
<Site "small">
Size 1
</Site>
this code:
print "Max: ", $config->get("MaxSize"), "\n";
$block = $config->block(Site => "big");
print "Big: ", $block->get("Size"), " / ",
$block->get("MaxSize"), "\n";
$block = $config->block(Site => "small");
print "Small: ", $block->get("Size"), " / ",
$block->get("MaxSize"), "\n";
will print:
Max: 100
Big: 10 / 100
Small: 1 / 100
Note that "block()" does not require any particular number of parameters. Any number will work, as
long as they uniquely identify a block in the configuration file. To get a list of available blocks,
use get() with the name of the block tag.
This method will die() if no block can be found matching the specifier passed in.
$config->clear()
Clears out all data in $config. Call before re-calling $config->read() for a fresh read.
$config->dump()
This returns a dumped copy of the current configuration. It can be used on a block object as well.
Since it returns a string, you should say:
print $config->dump;
Or:
for ($config->block(VirtualHost => '10.1.65.1')) {
print $_->dump;
}
If you want to see any output.
Parsing a Real Apache Config File
To parse a real Apache config file (ex. "httpd.conf") you'll need to use some non-default options.
Here's a reasonable starting point:
$config = Config::ApacheFormat->new(
root_directive => 'ServerRoot',
hash_directives => [ 'AddHandler' ],
include_directives => [ 'Include',
'AccessConfig',
'ResourceConfig' ],
setenv_vars => 1,
fix_booleans => 1);
TODO
Some possible ideas for future development:
• Add a set() method. (useless?)
• Add a write() method to create a new configuration file. (useless?)
BUGS
I know of no bugs in this software. If you find one, please create a bug report at:
http://rt.cpan.org/
Include the version of the module you're using and a small piece of code that I can run which
demonstrates the problem.
COPYRIGHT AND LICENSE
Copyright (C) 2002-2003 Sam Tregar
This program is free software; you can redistribute it and/or modify it under the same terms as Perl 5
itself.
AUTHORS
Sam Tregar <sam@tregar.com>
Original author and maintainer
Nathan Wiger <nate@wiger.org>
Porting of features from Apache::ConfigFile
SEE ALSO
Apache::ConfigFile
Apache::ConfigParser
perl v5.34.0 2022-06-11 ApacheFormat(3pm)