Provided by: ocaml-man_4.14.1-1ubuntu1_all 
NAME
Bigarray - Large, multi-dimensional, numerical arrays.
Module
Module Bigarray
Documentation
Module Bigarray
: sig end
Large, multi-dimensional, numerical arrays.
This module implements multi-dimensional arrays of integers and floating-point numbers, thereafter
referred to as 'Bigarrays', to distinguish them from the standard OCaml arrays described in Array .
The implementation allows efficient sharing of large numerical arrays between OCaml code and C or Fortran
numerical libraries.
The main differences between 'Bigarrays' and standard OCaml arrays are as follows:
-Bigarrays are not limited in size, unlike OCaml arrays. (Normal float arrays are limited to 2,097,151
elements on a 32-bit platform, and normal arrays of other types to 4,194,303 elements.)
-Bigarrays are multi-dimensional. Any number of dimensions between 0 and 16 is supported. In contrast,
OCaml arrays are mono-dimensional and require encoding multi-dimensional arrays as arrays of arrays.
-Bigarrays can only contain integers and floating-point numbers, while OCaml arrays can contain arbitrary
OCaml data types.
-Bigarrays provide more space-efficient storage of integer and floating-point elements than normal OCaml
arrays, in particular because they support 'small' types such as single-precision floats and 8 and 16-bit
integers, in addition to the standard OCaml types of double-precision floats and 32 and 64-bit integers.
-The memory layout of Bigarrays is entirely compatible with that of arrays in C and Fortran, allowing
large arrays to be passed back and forth between OCaml code and C / Fortran code with no data copying at
all.
-Bigarrays support interesting high-level operations that normal arrays do not provide efficiently, such
as extracting sub-arrays and 'slicing' a multi-dimensional array along certain dimensions, all without
any copying.
Users of this module are encouraged to do open Bigarray in their source, then refer to array types and
operations via short dot notation, e.g. Array1.t or Array2.sub .
Bigarrays support all the OCaml ad-hoc polymorphic operations:
-comparisons ( = , <> , <= , etc, as well as compare );
-hashing (module Hash );
-and structured input-output (the functions from the Marshal module, as well as output_value and
input_value ).
Element kinds
Bigarrays can contain elements of the following kinds:
-IEEE single precision (32 bits) floating-point numbers ( Bigarray.float32_elt ),
-IEEE double precision (64 bits) floating-point numbers ( Bigarray.float64_elt ),
-IEEE single precision (2 * 32 bits) floating-point complex numbers ( Bigarray.complex32_elt ),
-IEEE double precision (2 * 64 bits) floating-point complex numbers ( Bigarray.complex64_elt ),
-8-bit integers (signed or unsigned) ( Bigarray.int8_signed_elt or Bigarray.int8_unsigned_elt ),
-16-bit integers (signed or unsigned) ( Bigarray.int16_signed_elt or Bigarray.int16_unsigned_elt ),
-OCaml integers (signed, 31 bits on 32-bit architectures, 63 bits on 64-bit architectures) (
Bigarray.int_elt ),
-32-bit signed integers ( Bigarray.int32_elt ),
-64-bit signed integers ( Bigarray.int64_elt ),
-platform-native signed integers (32 bits on 32-bit architectures, 64 bits on 64-bit architectures) (
Bigarray.nativeint_elt ).
Each element kind is represented at the type level by one of the *_elt types defined below (defined with
a single constructor instead of abstract types for technical injectivity reasons).
type float32_elt =
| Float32_elt
type float64_elt =
| Float64_elt
type int8_signed_elt =
| Int8_signed_elt
type int8_unsigned_elt =
| Int8_unsigned_elt
type int16_signed_elt =
| Int16_signed_elt
type int16_unsigned_elt =
| Int16_unsigned_elt
type int32_elt =
| Int32_elt
type int64_elt =
| Int64_elt
type int_elt =
| Int_elt
type nativeint_elt =
| Nativeint_elt
type complex32_elt =
| Complex32_elt
type complex64_elt =
| Complex64_elt
type ('a, 'b) kind =
| Float32 : (float, float32_elt) kind
| Float64 : (float, float64_elt) kind
| Int8_signed : (int, int8_signed_elt) kind
| Int8_unsigned : (int, int8_unsigned_elt) kind
| Int16_signed : (int, int16_signed_elt) kind
| Int16_unsigned : (int, int16_unsigned_elt) kind
| Int32 : (int32, int32_elt) kind
| Int64 : (int64, int64_elt) kind
| Int : (int, int_elt) kind
| Nativeint : (nativeint, nativeint_elt) kind
| Complex32 : (Complex.t, complex32_elt) kind
| Complex64 : (Complex.t, complex64_elt) kind
| Char : (char, int8_unsigned_elt) kind
To each element kind is associated an OCaml type, which is the type of OCaml values that can be stored in
the Bigarray or read back from it. This type is not necessarily the same as the type of the array
elements proper: for instance, a Bigarray whose elements are of kind float32_elt contains 32-bit single
precision floats, but reading or writing one of its elements from OCaml uses the OCaml type float , which
is 64-bit double precision floats.
The GADT type ('a, 'b) kind captures this association of an OCaml type 'a for values read or written in
the Bigarray, and of an element kind 'b which represents the actual contents of the Bigarray. Its
constructors list all possible associations of OCaml types with element kinds, and are re-exported below
for backward-compatibility reasons.
Using a generalized algebraic datatype (GADT) here allows writing well-typed polymorphic functions whose
return type depend on the argument type, such as:
let zero : type a b. (a, b) kind -> a = function
| Float32 -> 0.0 | Complex32 -> Complex.zero
| Float64 -> 0.0 | Complex64 -> Complex.zero
| Int8_signed -> 0 | Int8_unsigned -> 0
| Int16_signed -> 0 | Int16_unsigned -> 0
| Int32 -> 0l | Int64 -> 0L
| Int -> 0 | Nativeint -> 0n
| Char -> '\000'
val float32 : (float, float32_elt) kind
See Bigarray.char .
val float64 : (float, float64_elt) kind
See Bigarray.char .
val complex32 : (Complex.t, complex32_elt) kind
See Bigarray.char .
val complex64 : (Complex.t, complex64_elt) kind
See Bigarray.char .
val int8_signed : (int, int8_signed_elt) kind
See Bigarray.char .
val int8_unsigned : (int, int8_unsigned_elt) kind
See Bigarray.char .
val int16_signed : (int, int16_signed_elt) kind
See Bigarray.char .
val int16_unsigned : (int, int16_unsigned_elt) kind
See Bigarray.char .
val int : (int, int_elt) kind
See Bigarray.char .
val int32 : (int32, int32_elt) kind
See Bigarray.char .
val int64 : (int64, int64_elt) kind
See Bigarray.char .
val nativeint : (nativeint, nativeint_elt) kind
See Bigarray.char .
val char : (char, int8_unsigned_elt) kind
As shown by the types of the values above, Bigarrays of kind float32_elt and float64_elt are accessed
using the OCaml type float . Bigarrays of complex kinds complex32_elt , complex64_elt are accessed with
the OCaml type Complex.t . Bigarrays of integer kinds are accessed using the smallest OCaml integer type
large enough to represent the array elements: int for 8- and 16-bit integer Bigarrays, as well as
OCaml-integer Bigarrays; int32 for 32-bit integer Bigarrays; int64 for 64-bit integer Bigarrays; and
nativeint for platform-native integer Bigarrays. Finally, Bigarrays of kind int8_unsigned_elt can also
be accessed as arrays of characters instead of arrays of small integers, by using the kind value char
instead of int8_unsigned .
val kind_size_in_bytes : ('a, 'b) kind -> int
kind_size_in_bytes k is the number of bytes used to store an element of type k .
Since 4.03.0
Array layouts
type c_layout =
| C_layout_typ
See Bigarray.fortran_layout .
type fortran_layout =
| Fortran_layout_typ
To facilitate interoperability with existing C and Fortran code, this library supports two different
memory layouts for Bigarrays, one compatible with the C conventions, the other compatible with the
Fortran conventions.
In the C-style layout, array indices start at 0, and multi-dimensional arrays are laid out in row-major
format. That is, for a two-dimensional array, all elements of row 0 are contiguous in memory, followed
by all elements of row 1, etc. In other terms, the array elements at (x,y) and (x, y+1) are adjacent in
memory.
In the Fortran-style layout, array indices start at 1, and multi-dimensional arrays are laid out in
column-major format. That is, for a two-dimensional array, all elements of column 0 are contiguous in
memory, followed by all elements of column 1, etc. In other terms, the array elements at (x,y) and (x+1,
y) are adjacent in memory.
Each layout style is identified at the type level by the phantom types Bigarray.c_layout and
Bigarray.fortran_layout respectively.
Supported layouts
The GADT type 'a layout represents one of the two supported memory layouts: C-style or Fortran-style. Its
constructors are re-exported as values below for backward-compatibility reasons.
type 'a layout =
| C_layout : c_layout layout
| Fortran_layout : fortran_layout layout
val c_layout : c_layout layout
val fortran_layout : fortran_layout layout
Generic arrays (of arbitrarily many dimensions)
module Genarray : sig end
Zero-dimensional arrays
module Array0 : sig end
Zero-dimensional arrays. The Array0 structure provides operations similar to those of Bigarray.Genarray ,
but specialized to the case of zero-dimensional arrays that only contain a single scalar value.
Statically knowing the number of dimensions of the array allows faster operations, and more precise
static type-checking.
Since 4.05.0
One-dimensional arrays
module Array1 : sig end
One-dimensional arrays. The Array1 structure provides operations similar to those of Bigarray.Genarray ,
but specialized to the case of one-dimensional arrays. (The Bigarray.Array2 and Bigarray.Array3
structures below provide operations specialized for two- and three-dimensional arrays.) Statically
knowing the number of dimensions of the array allows faster operations, and more precise static
type-checking.
Two-dimensional arrays
module Array2 : sig end
Two-dimensional arrays. The Array2 structure provides operations similar to those of Bigarray.Genarray ,
but specialized to the case of two-dimensional arrays.
Three-dimensional arrays
module Array3 : sig end
Three-dimensional arrays. The Array3 structure provides operations similar to those of Bigarray.Genarray
, but specialized to the case of three-dimensional arrays.
Coercions between generic Bigarrays and fixed-dimension Bigarrays
val genarray_of_array0 : ('a, 'b, 'c) Array0.t -> ('a, 'b, 'c) Genarray.t
Return the generic Bigarray corresponding to the given zero-dimensional Bigarray.
Since 4.05.0
val genarray_of_array1 : ('a, 'b, 'c) Array1.t -> ('a, 'b, 'c) Genarray.t
Return the generic Bigarray corresponding to the given one-dimensional Bigarray.
val genarray_of_array2 : ('a, 'b, 'c) Array2.t -> ('a, 'b, 'c) Genarray.t
Return the generic Bigarray corresponding to the given two-dimensional Bigarray.
val genarray_of_array3 : ('a, 'b, 'c) Array3.t -> ('a, 'b, 'c) Genarray.t
Return the generic Bigarray corresponding to the given three-dimensional Bigarray.
val array0_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array0.t
Return the zero-dimensional Bigarray corresponding to the given generic Bigarray.
Since 4.05.0
Raises Invalid_argument if the generic Bigarray does not have exactly zero dimension.
val array1_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array1.t
Return the one-dimensional Bigarray corresponding to the given generic Bigarray.
Raises Invalid_argument if the generic Bigarray does not have exactly one dimension.
val array2_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array2.t
Return the two-dimensional Bigarray corresponding to the given generic Bigarray.
Raises Invalid_argument if the generic Bigarray does not have exactly two dimensions.
val array3_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array3.t
Return the three-dimensional Bigarray corresponding to the given generic Bigarray.
Raises Invalid_argument if the generic Bigarray does not have exactly three dimensions.
Re-shaping Bigarrays
val reshape : ('a, 'b, 'c) Genarray.t -> int array -> ('a, 'b, 'c) Genarray.t
reshape b [|d1;...;dN|] converts the Bigarray b to a N -dimensional array of dimensions d1 ... dN . The
returned array and the original array b share their data and have the same layout. For instance,
assuming that b is a one-dimensional array of dimension 12, reshape b [|3;4|] returns a two-dimensional
array b' of dimensions 3 and 4. If b has C layout, the element (x,y) of b' corresponds to the element x
* 3 + y of b . If b has Fortran layout, the element (x,y) of b' corresponds to the element x + (y - 1) *
4 of b . The returned Bigarray must have exactly the same number of elements as the original Bigarray b
. That is, the product of the dimensions of b must be equal to i1 * ... * iN . Otherwise,
Invalid_argument is raised.
val reshape_0 : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array0.t
Specialized version of Bigarray.reshape for reshaping to zero-dimensional arrays.
Since 4.05.0
val reshape_1 : ('a, 'b, 'c) Genarray.t -> int -> ('a, 'b, 'c) Array1.t
Specialized version of Bigarray.reshape for reshaping to one-dimensional arrays.
val reshape_2 : ('a, 'b, 'c) Genarray.t -> int -> int -> ('a, 'b, 'c) Array2.t
Specialized version of Bigarray.reshape for reshaping to two-dimensional arrays.
val reshape_3 : ('a, 'b, 'c) Genarray.t -> int -> int -> int -> ('a, 'b, 'c) Array3.t
Specialized version of Bigarray.reshape for reshaping to three-dimensional arrays.
OCamldoc 2023-10-26 Bigarray(3o)