NAME

       fence_pve - Fencing agent for the Proxmox Virtual Environment

DESCRIPTION

       The fence_pve agent can be used to fence virtual machines acting as nodes in a virtualized cluster.

       fence_pve  accepts  options  on  the  command line as well as from stdin. Fenced sends parameters through
       stdin when it execs the agent. fence_pve can be run by itself with command line options.  This is  useful
       for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.proxmox.com/

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -a, --ip=[ip]
              IP  Address  or  Hostname of a node within the Proxmox cluster. This parameter is always required.

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device (Default Value: 8006)

       -m, --method=[method]
              Method to fence (onoff|cycle) (Default Value: onoff)

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Id of the virtual machine. This parameter is always required.

       -l, --username=[name]
              Login name (Default Value: root@pam)

       -N, --nodename
              Node on which machine is located. (Optional, will be automatically determined)

       --vmtype
              Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu)

       -q, --quiet
              Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

       -v, --verbose
              Verbose mode. Multiple -v flags can be stacked on  the  command  line  (e.g.,  -vvv)  to  increase
              verbosity.

       --verbose-level
              Level  of  debugging  detail in output. Defaults to the number of --verbose flags specified on the
              command line, or to 1 if verbose=1 in a stonith device  configuration  (i.e.,  on  stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs with aliases/virtual machines if there is support for more then one device.
              Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if  it  can  be  obtained
              without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       ip     IP  Address  or  Hostname of a node within the Proxmox cluster. This parameter is always required.
              Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device (Default Value: 8006)

       method Method to fence (onoff|cycle) (Default Value: onoff)

       password
              Login password or passphrase Obsoletes: passwd

       password_script
              Script to run to retrieve password Obsoletes: passwd_script

       plug   Id of the virtual machine. This parameter is always required. Obsoletes: port

       username
              Login name (Default Value: root@pam) Obsoletes: login

       nodename
              Node on which  machine  is  located.  (Optional,  will  be  automatically  determined)  Obsoletes:
              node_name

       vmtype Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu)

       quiet  Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

       verbose
              Verbose  mode.  Multiple  -v  flags  can  be  stacked on the command line (e.g., -vvv) to increase
              verbosity.

       verbose_level
              Level of debugging detail in output. Defaults to the number of --verbose flags  specified  on  the
              command  line,  or  to  1  if verbose=1 in a stonith device configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

fence_pve (Fence Agent)                            2009-10-20                                     FENCE_AGENT(8)