NAME

       fence_docker - Fence agent for Docker

DESCRIPTION

       fence_docker  is  I/O fencing agent which can be used with the Docker Engine containers. You can use this
       fence-agent without any authentication, or you can use TLS authentication (use --ssl  option,  more  info
       about TLS authentication in docker: http://docs.docker.com/examples/https/).

       fence_docker  accepts  options on the command line as well as from stdin. Fenced sends parameters through
       stdin when it execs the agent. fence_docker can be run by itself with  command  line  options.   This  is
       useful for testing and for turning outlets on or off from scripts.

       Vendor URL: www.docker.io

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -a, --ip=[ip]
              IP address or hostname of fencing device This parameter is always required.

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device (Default Value: 80)

       -m, --method=[method]
              Method to fence (onoff|cycle) (Default Value: onoff)

       -n, --plug=[id]
              Physical  plug  number  on  device,  UUID  or  identification  of machine This parameter is always
              required.

       -z, --ssl
              Use SSL connection with verifying certificate

       --ssl-insecure
              Use SSL connection without verifying certificate

       --ssl-secure
              Use SSL connection with verifying certificate

       --api-version
              Version of Docker Remote API (default: 1.11) (Default Value: 1.11)

       --tlscacert
              Path to CA certificate (PEM format) for TLS authentication. Required  if  --ssl  option  is  used.

       --tlscert
              Path  to client certificate (PEM format) for TLS authentication. Required if --ssl option is used.

       --tlskey
              Path to client key (PEM format) for TLS authentication. Required if --ssl option is used.

       -q, --quiet
              Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

       -v, --verbose
              Verbose mode. Multiple -v flags can be stacked on  the  command  line  (e.g.,  -vvv)  to  increase
              verbosity.

       --verbose-level
              Level  of  debugging  detail in output. Defaults to the number of --verbose flags specified on the
              command line, or to 1 if verbose=1 in a stonith device  configuration  (i.e.,  on  stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --gnutlscli-path=[path]
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs with aliases/virtual machines if there is support for more then one device.
              Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if  it  can  be  obtained
              without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       ip     IP  address  or  hostname  of  fencing device This parameter is always required. Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device (Default Value: 80)

       method Method to fence (onoff|cycle) (Default Value: onoff)

       plug   Physical plug number on device, UUID  or  identification  of  machine  This  parameter  is  always
              required. Obsoletes: port

       ssl    Use SSL connection with verifying certificate

       ssl_insecure
              Use SSL connection without verifying certificate

       ssl_secure
              Use SSL connection with verifying certificate

       api_version
              Version of Docker Remote API (default: 1.11) (Default Value: 1.11)

       tlscacert
              Path  to  CA  certificate  (PEM  format) for TLS authentication. Required if --ssl option is used.

       tlscert
              Path to client certificate (PEM format) for TLS authentication. Required if --ssl option is  used.

       tlskey Path to client key (PEM format) for TLS authentication. Required if --ssl option is used.

       quiet  Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

       verbose
              Verbose  mode.  Multiple  -v  flags  can  be  stacked on the command line (e.g., -vvv) to increase
              verbosity.

       verbose_level
              Level of debugging detail in output. Defaults to the number of --verbose flags  specified  on  the
              command  line,  or  to  1  if verbose=1 in a stonith device configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       gnutlscli_path
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

fence_docker (Fence Agent)                         2009-10-20                                     FENCE_AGENT(8)