Provided by: manpages_5.10-1ubuntu1_all 
NAME
signal - overview of signals
DESCRIPTION
Linux supports both POSIX reliable signals (hereinafter "standard signals") and POSIX real-time signals.
Signal dispositions
Each signal has a current disposition, which determines how the process behaves when it is delivered the
signal.
The entries in the "Action" column of the table below specify the default disposition for each signal, as
follows:
Term Default action is to terminate the process.
Ign Default action is to ignore the signal.
Core Default action is to terminate the process and dump core (see core(5)).
Stop Default action is to stop the process.
Cont Default action is to continue the process if it is currently stopped.
A process can change the disposition of a signal using sigaction(2) or signal(2). (The latter is less
portable when establishing a signal handler; see signal(2) for details.) Using these system calls, a
process can elect one of the following behaviors to occur on delivery of the signal: perform the default
action; ignore the signal; or catch the signal with a signal handler, a programmer-defined function that
is automatically invoked when the signal is delivered.
By default, a signal handler is invoked on the normal process stack. It is possible to arrange that the
signal handler uses an alternate stack; see sigaltstack(2) for a discussion of how to do this and when it
might be useful.
The signal disposition is a per-process attribute: in a multithreaded application, the disposition of a
particular signal is the same for all threads.
A child created via fork(2) inherits a copy of its parent's signal dispositions. During an execve(2),
the dispositions of handled signals are reset to the default; the dispositions of ignored signals are
left unchanged.
Sending a signal
The following system calls and library functions allow the caller to send a signal:
raise(3)
Sends a signal to the calling thread.
kill(2)
Sends a signal to a specified process, to all members of a specified process group, or to all
processes on the system.
pidfd_send_signal(2)
Sends a signal to a process identified by a PID file descriptor.
killpg(3)
Sends a signal to all of the members of a specified process group.
pthread_kill(3)
Sends a signal to a specified POSIX thread in the same process as the caller.
tgkill(2)
Sends a signal to a specified thread within a specific process. (This is the system call used to
implement pthread_kill(3).)
sigqueue(3)
Sends a real-time signal with accompanying data to a specified process.
Waiting for a signal to be caught
The following system calls suspend execution of the calling thread until a signal is caught (or an
unhandled signal terminates the process):
pause(2)
Suspends execution until any signal is caught.
sigsuspend(2)
Temporarily changes the signal mask (see below) and suspends execution until one of the unmasked
signals is caught.
Synchronously accepting a signal
Rather than asynchronously catching a signal via a signal handler, it is possible to synchronously accept
the signal, that is, to block execution until the signal is delivered, at which point the kernel returns
information about the signal to the caller. There are two general ways to do this:
* sigwaitinfo(2), sigtimedwait(2), and sigwait(3) suspend execution until one of the signals in a
specified set is delivered. Each of these calls returns information about the delivered signal.
* signalfd(2) returns a file descriptor that can be used to read information about signals that are
delivered to the caller. Each read(2) from this file descriptor blocks until one of the signals in the
set specified in the signalfd(2) call is delivered to the caller. The buffer returned by read(2)
contains a structure describing the signal.
Signal mask and pending signals
A signal may be blocked, which means that it will not be delivered until it is later unblocked. Between
the time when it is generated and when it is delivered a signal is said to be pending.
Each thread in a process has an independent signal mask, which indicates the set of signals that the
thread is currently blocking. A thread can manipulate its signal mask using pthread_sigmask(3). In a
traditional single-threaded application, sigprocmask(2) can be used to manipulate the signal mask.
A child created via fork(2) inherits a copy of its parent's signal mask; the signal mask is preserved
across execve(2).
A signal may be process-directed or thread-directed. A process-directed signal is one that is targeted
at (and thus pending for) the process as a whole. A signal may be process-directed because it was
generated by the kernel for reasons other than a hardware exception, or because it was sent using kill(2)
or sigqueue(3). A thread-directed signal is one that is targeted at a specific thread. A signal may be
thread-directed because it was generated as a consequence of executing a specific machine-language
instruction that triggered a hardware exception (e.g., SIGSEGV for an invalid memory access, or SIGFPE
for a math error), or because it was targeted at a specific thread using interfaces such as tgkill(2) or
pthread_kill(3).
A process-directed signal may be delivered to any one of the threads that does not currently have the
signal blocked. If more than one of the threads has the signal unblocked, then the kernel chooses an
arbitrary thread to which to deliver the signal.
A thread can obtain the set of signals that it currently has pending using sigpending(2). This set will
consist of the union of the set of pending process-directed signals and the set of signals pending for
the calling thread.
A child created via fork(2) initially has an empty pending signal set; the pending signal set is
preserved across an execve(2).
Execution of signal handlers
Whenever there is a transition from kernel-mode to user-mode execution (e.g., on return from a system
call or scheduling of a thread onto the CPU), the kernel checks whether there is a pending unblocked
signal for which the process has established a signal handler. If there is such a pending signal, the
following steps occur:
1. The kernel performs the necessary preparatory steps for execution of the signal handler:
a) The signal is removed from the set of pending signals.
b) If the signal handler was installed by a call to sigaction(2) that specified the SA_ONSTACK flag
and the thread has defined an alternate signal stack (using sigaltstack(2)), then that stack is
installed.
c) Various pieces of signal-related context are saved into a special frame that is created on the
stack. The saved information includes:
+ the program counter register (i.e., the address of the next instruction in the main program that
should be executed when the signal handler returns);
+ architecture-specific register state required for resuming the interrupted program;
+ the thread's current signal mask;
+ the thread's alternate signal stack settings.
(If the signal handler was installed using the sigaction(2) SA_SIGINFO flag, then the above
information is accessible via the ucontext_t object that is pointed to by the third argument of the
signal handler.)
d) Any signals specified in act->sa_mask when registering the handler with sigprocmask(2) are added to
the thread's signal mask. The signal being delivered is also added to the signal mask, unless
SA_NODEFER was specified when registering the handler. These signals are thus blocked while the
handler executes.
2. The kernel constructs a frame for the signal handler on the stack. The kernel sets the program
counter for the thread to point to the first instruction of the signal handler function, and
configures the return address for that function to point to a piece of user-space code known as the
signal trampoline (described in sigreturn(2)).
3. The kernel passes control back to user-space, where execution commences at the start of the signal
handler function.
4. When the signal handler returns, control passes to the signal trampoline code.
5. The signal trampoline calls sigreturn(2), a system call that uses the information in the stack frame
created in step 1 to restore the thread to its state before the signal handler was called. The
thread's signal mask and alternate signal stack settings are restored as part of this procedure. Upon
completion of the call to sigreturn(2), the kernel transfers control back to user space, and the
thread recommences execution at the point where it was interrupted by the signal handler.
Note that if the signal handler does not return (e.g., control is transferred out of the handler using
siglongjmp(3), or the handler executes a new program with execve(2)), then the final step is not
performed. In particular, in such scenarios it is the programmer's responsibility to restore the state
of the signal mask (using sigprocmask(2)), if it is desired to unblock the signals that were blocked on
entry to the signal handler. (Note that siglongjmp(3) may or may not restore the signal mask, depending
on the savesigs value that was specified in the corresponding call to sigsetjmp(3).)
From the kernel's point of view, execution of the signal handler code is exactly the same as the
execution of any other user-space code. That is to say, the kernel does not record any special state
information indicating that the thread is currently excuting inside a signal handler. All necessary
state information is maintained in user-space registers and the user-space stack. The depth to which
nested signal handlers may be invoked is thus limited only by the user-space stack (and sensible software
design!).
Standard signals
Linux supports the standard signals listed below. The second column of the table indicates which
standard (if any) specified the signal: "P1990" indicates that the signal is described in the original
POSIX.1-1990 standard; "P2001" indicates that the signal was added in SUSv2 and POSIX.1-2001.
Signal Standard Action Comment
────────────────────────────────────────────────────────────────────────
SIGABRT P1990 Core Abort signal from abort(3)
SIGALRM P1990 Term Timer signal from alarm(2)
SIGBUS P2001 Core Bus error (bad memory access)
SIGCHLD P1990 Ign Child stopped or terminated
SIGCLD - Ign A synonym for SIGCHLD
SIGCONT P1990 Cont Continue if stopped
SIGEMT - Term Emulator trap
SIGFPE P1990 Core Floating-point exception
SIGHUP P1990 Term Hangup detected on controlling terminal
or death of controlling process
SIGILL P1990 Core Illegal Instruction
SIGINFO - A synonym for SIGPWR
SIGINT P1990 Term Interrupt from keyboard
SIGIO - Term I/O now possible (4.2BSD)
SIGIOT - Core IOT trap. A synonym for SIGABRT
SIGKILL P1990 Term Kill signal
SIGLOST - Term File lock lost (unused)
SIGPIPE P1990 Term Broken pipe: write to pipe with no
readers; see pipe(7)
SIGPOLL P2001 Term Pollable event (Sys V);
synonym for SIGIO
SIGPROF P2001 Term Profiling timer expired
SIGPWR - Term Power failure (System V)
SIGQUIT P1990 Core Quit from keyboard
SIGSEGV P1990 Core Invalid memory reference
SIGSTKFLT - Term Stack fault on coprocessor (unused)
SIGSTOP P1990 Stop Stop process
SIGTSTP P1990 Stop Stop typed at terminal
SIGSYS P2001 Core Bad system call (SVr4);
see also seccomp(2)
SIGTERM P1990 Term Termination signal
SIGTRAP P2001 Core Trace/breakpoint trap
SIGTTIN P1990 Stop Terminal input for background process
SIGTTOU P1990 Stop Terminal output for background process
SIGUNUSED - Core Synonymous with SIGSYS
SIGURG P2001 Ign Urgent condition on socket (4.2BSD)
SIGUSR1 P1990 Term User-defined signal 1
SIGUSR2 P1990 Term User-defined signal 2
SIGVTALRM P2001 Term Virtual alarm clock (4.2BSD)
SIGXCPU P2001 Core CPU time limit exceeded (4.2BSD);
see setrlimit(2)
SIGXFSZ P2001 Core File size limit exceeded (4.2BSD);
see setrlimit(2)
SIGWINCH - Ign Window resize signal (4.3BSD, Sun)
The signals SIGKILL and SIGSTOP cannot be caught, blocked, or ignored.
Up to and including Linux 2.2, the default behavior for SIGSYS, SIGXCPU, SIGXFSZ, and (on architectures
other than SPARC and MIPS) SIGBUS was to terminate the process (without a core dump). (On some other
UNIX systems the default action for SIGXCPU and SIGXFSZ is to terminate the process without a core dump.)
Linux 2.4 conforms to the POSIX.1-2001 requirements for these signals, terminating the process with a
core dump.
SIGEMT is not specified in POSIX.1-2001, but nevertheless appears on most other UNIX systems, where its
default action is typically to terminate the process with a core dump.
SIGPWR (which is not specified in POSIX.1-2001) is typically ignored by default on those other UNIX
systems where it appears.
SIGIO (which is not specified in POSIX.1-2001) is ignored by default on several other UNIX systems.
Queueing and delivery semantics for standard signals
If multiple standard signals are pending for a process, the order in which the signals are delivered is
unspecified.
Standard signals do not queue. If multiple instances of a standard signal are generated while that
signal is blocked, then only one instance of the signal is marked as pending (and the signal will be
delivered just once when it is unblocked). In the case where a standard signal is already pending, the
siginfo_t structure (see sigaction(2)) associated with that signal is not overwritten on arrival of
subsequent instances of the same signal. Thus, the process will receive the information associated with
the first instance of the signal.
Signal numbering for standard signals
The numeric value for each signal is given in the table below. As shown in the table, many signals have
different numeric values on different architectures. The first numeric value in each table row shows the
signal number on x86, ARM, and most other architectures; the second value is for Alpha and SPARC; the
third is for MIPS; and the last is for PARISC. A dash (-) denotes that a signal is absent on the
corresponding architecture.
Signal x86/ARM Alpha/ MIPS PARISC Notes
most others SPARC
─────────────────────────────────────────────────────────────────
SIGHUP 1 1 1 1
SIGINT 2 2 2 2
SIGQUIT 3 3 3 3
SIGILL 4 4 4 4
SIGTRAP 5 5 5 5
SIGABRT 6 6 6 6
SIGIOT 6 6 6 6
SIGBUS 7 10 10 10
SIGEMT - 7 7 -
SIGFPE 8 8 8 8
SIGKILL 9 9 9 9
SIGUSR1 10 30 16 16
SIGSEGV 11 11 11 11
SIGUSR2 12 31 17 17
SIGPIPE 13 13 13 13
SIGALRM 14 14 14 14
SIGTERM 15 15 15 15
SIGSTKFLT 16 - - 7
SIGCHLD 17 20 18 18
SIGCLD - - 18 -
SIGCONT 18 19 25 26
SIGSTOP 19 17 23 24
SIGTSTP 20 18 24 25
SIGTTIN 21 21 26 27
SIGTTOU 22 22 27 28
SIGURG 23 16 21 29
SIGXCPU 24 24 30 12
SIGXFSZ 25 25 31 30
SIGVTALRM 26 26 28 20
SIGPROF 27 27 29 21
SIGWINCH 28 28 20 23
SIGIO 29 23 22 22
SIGPOLL Same as SIGIO
SIGPWR 30 29/- 19 19
SIGINFO - 29/- - -
SIGLOST - -/29 - -
SIGSYS 31 12 12 31
SIGUNUSED 31 - - 31
Note the following:
* Where defined, SIGUNUSED is synonymous with SIGSYS. Since glibc 2.26, SIGUNUSED is no longer defined
on any architecture.
* Signal 29 is SIGINFO/SIGPWR (synonyms for the same value) on Alpha but SIGLOST on SPARC.
Real-time signals
Starting with version 2.2, Linux supports real-time signals as originally defined in the POSIX.1b real-
time extensions (and now included in POSIX.1-2001). The range of supported real-time signals is defined
by the macros SIGRTMIN and SIGRTMAX. POSIX.1-2001 requires that an implementation support at least
_POSIX_RTSIG_MAX (8) real-time signals.
The Linux kernel supports a range of 33 different real-time signals, numbered 32 to 64. However, the
glibc POSIX threads implementation internally uses two (for NPTL) or three (for LinuxThreads) real-time
signals (see pthreads(7)), and adjusts the value of SIGRTMIN suitably (to 34 or 35). Because the range
of available real-time signals varies according to the glibc threading implementation (and this variation
can occur at run time according to the available kernel and glibc), and indeed the range of real-time
signals varies across UNIX systems, programs should never refer to real-time signals using hard-coded
numbers, but instead should always refer to real-time signals using the notation SIGRTMIN+n, and include
suitable (run-time) checks that SIGRTMIN+n does not exceed SIGRTMAX.
Unlike standard signals, real-time signals have no predefined meanings: the entire set of real-time
signals can be used for application-defined purposes.
The default action for an unhandled real-time signal is to terminate the receiving process.
Real-time signals are distinguished by the following:
1. Multiple instances of real-time signals can be queued. By contrast, if multiple instances of a
standard signal are delivered while that signal is currently blocked, then only one instance is
queued.
2. If the signal is sent using sigqueue(3), an accompanying value (either an integer or a pointer) can
be sent with the signal. If the receiving process establishes a handler for this signal using the
SA_SIGINFO flag to sigaction(2), then it can obtain this data via the si_value field of the siginfo_t
structure passed as the second argument to the handler. Furthermore, the si_pid and si_uid fields of
this structure can be used to obtain the PID and real user ID of the process sending the signal.
3. Real-time signals are delivered in a guaranteed order. Multiple real-time signals of the same type
are delivered in the order they were sent. If different real-time signals are sent to a process,
they are delivered starting with the lowest-numbered signal. (I.e., low-numbered signals have
highest priority.) By contrast, if multiple standard signals are pending for a process, the order in
which they are delivered is unspecified.
If both standard and real-time signals are pending for a process, POSIX leaves it unspecified which is
delivered first. Linux, like many other implementations, gives priority to standard signals in this
case.
According to POSIX, an implementation should permit at least _POSIX_SIGQUEUE_MAX (32) real-time signals
to be queued to a process. However, Linux does things differently. In kernels up to and including
2.6.7, Linux imposes a system-wide limit on the number of queued real-time signals for all processes.
This limit can be viewed and (with privilege) changed via the /proc/sys/kernel/rtsig-max file. A related
file, /proc/sys/kernel/rtsig-nr, can be used to find out how many real-time signals are currently queued.
In Linux 2.6.8, these /proc interfaces were replaced by the RLIMIT_SIGPENDING resource limit, which
specifies a per-user limit for queued signals; see setrlimit(2) for further details.
The addition of real-time signals required the widening of the signal set structure (sigset_t) from 32 to
64 bits. Consequently, various system calls were superseded by new system calls that supported the
larger signal sets. The old and new system calls are as follows:
Linux 2.0 and earlier Linux 2.2 and later
sigaction(2) rt_sigaction(2)
sigpending(2) rt_sigpending(2)
sigprocmask(2) rt_sigprocmask(2)
sigreturn(2) rt_sigreturn(2)
sigsuspend(2) rt_sigsuspend(2)
sigtimedwait(2) rt_sigtimedwait(2)
Interruption of system calls and library functions by signal handlers
If a signal handler is invoked while a system call or library function call is blocked, then either:
* the call is automatically restarted after the signal handler returns; or
* the call fails with the error EINTR.
Which of these two behaviors occurs depends on the interface and whether or not the signal handler was
established using the SA_RESTART flag (see sigaction(2)). The details vary across UNIX systems; below,
the details for Linux.
If a blocked call to one of the following interfaces is interrupted by a signal handler, then the call is
automatically restarted after the signal handler returns if the SA_RESTART flag was used; otherwise the
call fails with the error EINTR:
* read(2), readv(2), write(2), writev(2), and ioctl(2) calls on "slow" devices. A "slow" device is one
where the I/O call may block for an indefinite time, for example, a terminal, pipe, or socket. If an
I/O call on a slow device has already transferred some data by the time it is interrupted by a signal
handler, then the call will return a success status (normally, the number of bytes transferred). Note
that a (local) disk is not a slow device according to this definition; I/O operations on disk devices
are not interrupted by signals.
* open(2), if it can block (e.g., when opening a FIFO; see fifo(7)).
* wait(2), wait3(2), wait4(2), waitid(2), and waitpid(2).
* Socket interfaces: accept(2), connect(2), recv(2), recvfrom(2), recvmmsg(2), recvmsg(2), send(2),
sendto(2), and sendmsg(2), unless a timeout has been set on the socket (see below).
* File locking interfaces: flock(2) and the F_SETLKW and F_OFD_SETLKW operations of fcntl(2)
* POSIX message queue interfaces: mq_receive(3), mq_timedreceive(3), mq_send(3), and mq_timedsend(3).
* futex(2) FUTEX_WAIT (since Linux 2.6.22; beforehand, always failed with EINTR).
* getrandom(2).
* pthread_mutex_lock(3), pthread_cond_wait(3), and related APIs.
* futex(2) FUTEX_WAIT_BITSET.
* POSIX semaphore interfaces: sem_wait(3) and sem_timedwait(3) (since Linux 2.6.22; beforehand, always
failed with EINTR).
* read(2) from an inotify(7) file descriptor (since Linux 3.8; beforehand, always failed with EINTR).
The following interfaces are never restarted after being interrupted by a signal handler, regardless of
the use of SA_RESTART; they always fail with the error EINTR when interrupted by a signal handler:
* "Input" socket interfaces, when a timeout (SO_RCVTIMEO) has been set on the socket using setsockopt(2):
accept(2), recv(2), recvfrom(2), recvmmsg(2) (also with a non-NULL timeout argument), and recvmsg(2).
* "Output" socket interfaces, when a timeout (SO_RCVTIMEO) has been set on the socket using
setsockopt(2): connect(2), send(2), sendto(2), and sendmsg(2).
* Interfaces used to wait for signals: pause(2), sigsuspend(2), sigtimedwait(2), and sigwaitinfo(2).
* File descriptor multiplexing interfaces: epoll_wait(2), epoll_pwait(2), poll(2), ppoll(2), select(2),
and pselect(2).
* System V IPC interfaces: msgrcv(2), msgsnd(2), semop(2), and semtimedop(2).
* Sleep interfaces: clock_nanosleep(2), nanosleep(2), and usleep(3).
* io_getevents(2).
The sleep(3) function is also never restarted if interrupted by a handler, but gives a success return:
the number of seconds remaining to sleep.
Interruption of system calls and library functions by stop signals
On Linux, even in the absence of signal handlers, certain blocking interfaces can fail with the error
EINTR after the process is stopped by one of the stop signals and then resumed via SIGCONT. This
behavior is not sanctioned by POSIX.1, and doesn't occur on other systems.
The Linux interfaces that display this behavior are:
* "Input" socket interfaces, when a timeout (SO_RCVTIMEO) has been set on the socket using setsockopt(2):
accept(2), recv(2), recvfrom(2), recvmmsg(2) (also with a non-NULL timeout argument), and recvmsg(2).
* "Output" socket interfaces, when a timeout (SO_RCVTIMEO) has been set on the socket using
setsockopt(2): connect(2), send(2), sendto(2), and sendmsg(2), if a send timeout (SO_SNDTIMEO) has been
set.
* epoll_wait(2), epoll_pwait(2).
* semop(2), semtimedop(2).
* sigtimedwait(2), sigwaitinfo(2).
* Linux 3.7 and earlier: read(2) from an inotify(7) file descriptor
* Linux 2.6.21 and earlier: futex(2) FUTEX_WAIT, sem_timedwait(3), sem_wait(3).
* Linux 2.6.8 and earlier: msgrcv(2), msgsnd(2).
* Linux 2.4 and earlier: nanosleep(2).
CONFORMING TO
POSIX.1, except as noted.
NOTES
For a discussion of async-signal-safe functions, see signal-safety(7).
The /proc/[pid]/task/[tid]/status file contains various fields that show the signals that a thread is
blocking (SigBlk), catching (SigCgt), or ignoring (SigIgn). (The set of signals that are caught or
ignored will be the same across all threads in a process.) Other fields show the set of pending signals
that are directed to the thread (SigPnd) as well as the set of pending signals that are directed to the
process as a whole (ShdPnd). The corresponding fields in /proc/[pid]/status show the information for the
main thread. See proc(5) for further details.
BUGS
There are six signals that can be delivered as a consequence of a hardware exception: SIGBUS, SIGEMT,
SIGFPE, SIGILL, SIGSEGV, and SIGTRAP. Which of these signals is delivered, for any given hardware
exception, is not documented and does not always make sense.
For example, an invalid memory access that causes delivery of SIGSEGV on one CPU architecture may cause
delivery of SIGBUS on another architecture, or vice versa.
For another example, using the x86 int instruction with a forbidden argument (any number other than 3 or
128) causes delivery of SIGSEGV, even though SIGILL would make more sense, because of how the CPU reports
the forbidden operation to the kernel.
SEE ALSO
kill(1), clone(2), getrlimit(2), kill(2), pidfd_send_signal(2), restart_syscall(2), rt_sigqueueinfo(2),
setitimer(2), setrlimit(2), sgetmask(2), sigaction(2), sigaltstack(2), signal(2), signalfd(2),
sigpending(2), sigprocmask(2), sigreturn(2), sigsuspend(2), sigwaitinfo(2), abort(3), bsd_signal(3),
killpg(3), longjmp(3), pthread_sigqueue(3), raise(3), sigqueue(3), sigset(3), sigsetops(3), sigvec(3),
sigwait(3), strsignal(3), swapcontext(3), sysv_signal(3), core(5), proc(5), nptl(7), pthreads(7),
sigevent(7)
COLOPHON
This page is part of release 5.10 of the Linux man-pages project. A description of the project,
information about reporting bugs, and the latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2020-12-21 SIGNAL(7)