NAME

       ModuleDtmfRepeater.conf - Configuration file for the SvxLink server DTMF Repeater module

DESCRIPTION

       svxlink  is  a general purpose voice service system for ham radio use. This man-page describe the SvxLink
       server configuration for the DTMF Repeater module.

       The DTMF Repeater module retransmits all received DTMF digits. This can be used to control remote systems
       that is also DTMF controlled. The DTMF muting feature should be used on a repeater to not retransmit  the
       received DTMF audio.

CONFIGURATION VARIABLES

       There  are  a  couple  of  configuration variables that are common to all modules.  The documentation for
       these can be found in the svxlink.conf(5) manual page.

       The amplitude, tone length  and  tone  spacing  of  the  generated  DTMF  digits  is  configured  in  the
       configuration  section  for  the  LocalTx  that  is  actually  transmitting  the DTMF. Have a look at the
       documentation for the DTMF_TONE_* configuration variables for a full explanation.

       Here is the description of all module specific configuration  variables  that  the  SvxLink  DtmfRepeater
       module understands.

   ModuleDtmfRepeater
       REPEAT_DELAY
              Specify a time, in milliseconds, that the DTMF Repeater module will wait after digit reception and
              squelch  close before retransmitting received DTMF digits.  If zero or not specified, SvxLink will
              try to send the digits as soon as they are received.

              This variable does not apply when DTMF digits are sent in non-activated mode.  Digits will then be
              retransmitted as soon as possible.

FILES

       /etc/svxlink/svxlink.conf (or deprecated /etc/svxlink.conf)
              The system wide configuration file.

       ~/.svxlink/svxlink.conf
              Per user configuration file.

       /etc/svxlink/svxlink.d/ModuleDtmfRepeater.conf
              Global modularized configuration file. Depends on the CFG_DIR configuration variable setting.

       ~/.svxlink/svxlink.d/ModuleDtmfRepeater.conf
              Per user modularized configuration file. Depends on the CFG_DIR configuration variable setting.

AUTHOR

       Tobias Blomberg (SM0SVX) <sm0svx at users dot sourceforge dot net>

SEE ALSO

       svxlink.conf(5)

Linux                                               JULY 2019                         MODULEDTMFREPEATER.CONF(5)