Provided by: libdbi-perl_1.643-3build3_amd64 
NAME
DBI::DBD::SqlEngine::Developers - Developers documentation for DBI::DBD::SqlEngine
SYNOPSIS
package DBD::myDriver;
use base qw(DBI::DBD::SqlEngine);
sub driver
{
...
my $drh = $proto->SUPER::driver($attr);
...
return $drh->{class};
}
sub CLONE { ... }
package DBD::myDriver::dr;
@ISA = qw(DBI::DBD::SqlEngine::dr);
sub data_sources { ... }
...
package DBD::myDriver::db;
@ISA = qw(DBI::DBD::SqlEngine::db);
sub init_valid_attributes { ... }
sub init_default_attributes { ... }
sub set_versions { ... }
sub validate_STORE_attr { my ($dbh, $attrib, $value) = @_; ... }
sub validate_FETCH_attr { my ($dbh, $attrib) = @_; ... }
sub get_myd_versions { ... }
sub get_avail_tables { ... }
package DBD::myDriver::st;
@ISA = qw(DBI::DBD::SqlEngine::st);
sub FETCH { ... }
sub STORE { ... }
package DBD::myDriver::Statement;
@ISA = qw(DBI::DBD::SqlEngine::Statement);
sub open_table { ... }
package DBD::myDriver::Table;
@ISA = qw(DBI::DBD::SqlEngine::Table);
my %reset_on_modify = (
myd_abc => "myd_foo",
myd_mno => "myd_bar",
);
__PACKAGE__->register_reset_on_modify( \%reset_on_modify );
my %compat_map = (
abc => 'foo_abc',
xyz => 'foo_xyz',
);
__PACKAGE__->register_compat_map( \%compat_map );
sub bootstrap_table_meta { ... }
sub init_table_meta { ... }
sub table_meta_attr_changed { ... }
sub open_data { ... }
sub new { ... }
sub fetch_row { ... }
sub push_row { ... }
sub push_names { ... }
sub seek { ... }
sub truncate { ... }
sub drop { ... }
# optimize the SQL engine by add one or more of
sub update_current_row { ... }
# or
sub update_specific_row { ... }
# or
sub update_one_row { ... }
# or
sub insert_new_row { ... }
# or
sub delete_current_row { ... }
# or
sub delete_one_row { ... }
DESCRIPTION
This document describes the interface of DBI::DBD::SqlEngine for DBD developers who write
DBI::DBD::SqlEngine based DBI drivers. It supplements DBI::DBD and DBI::DBD::SqlEngine::HowTo, which you
should read first.
CLASSES
Each DBI driver must provide a package global "driver" method and three DBI related classes:
DBI::DBD::SqlEngine::dr
Driver package, contains the methods DBI calls indirectly via DBI interface:
DBI->connect ('DBI:DBM:', undef, undef, {})
# invokes
package DBD::DBM::dr;
@DBD::DBM::dr::ISA = qw(DBI::DBD::SqlEngine::dr);
sub connect ($$;$$$)
{
...
}
Similar for "data_sources ()" and "disconnect_all()".
Pure Perl DBI drivers derived from DBI::DBD::SqlEngine usually don't need to override any of the
methods provided through the DBD::XXX::dr package. However if you need additional initialization not
fitting in "init_valid_attributes()" and "init_default_attributes()" of you're ::db class, the
connect method might be the final place to be modified.
DBI::DBD::SqlEngine::db
Contains the methods which are called through DBI database handles ($dbh). e.g.,
$sth = $dbh->prepare ("select * from foo");
# returns the f_encoding setting for table foo
$dbh->csv_get_meta ("foo", "f_encoding");
DBI::DBD::SqlEngine provides the typical methods required here. Developers who write DBI drivers
based on DBI::DBD::SqlEngine need to override the methods "set_versions" and "init_valid_attributes".
DBI::DBD::SqlEngine::TieMeta;
Provides the tie-magic for "$dbh->{$drv_pfx . "_meta"}". Routes "STORE" through
"$drv->set_sql_engine_meta()" and "FETCH" through "$drv->get_sql_engine_meta()". "DELETE" is not
supported, you have to execute a "DROP TABLE" statement, where applicable.
DBI::DBD::SqlEngine::TieTables;
Provides the tie-magic for tables in "$dbh->{$drv_pfx . "_meta"}". Routes "STORE" though
"$tblClass->set_table_meta_attr()" and "FETCH" though "$tblClass->get_table_meta_attr()". "DELETE"
removes an attribute from the meta object retrieved by "$tblClass->get_table_meta()".
DBI::DBD::SqlEngine::st
Contains the methods to deal with prepared statement handles. e.g.,
$sth->execute () or die $sth->errstr;
DBI::DBD::SqlEngine::TableSource;
Base class for 3rd party table sources:
$dbh->{sql_table_source} = "DBD::Foo::TableSource";
DBI::DBD::SqlEngine::DataSource;
Base class for 3rd party data sources:
$dbh->{sql_data_source} = "DBD::Foo::DataSource";
DBI::DBD::SqlEngine::Statement;
Base class for derived drivers statement engine. Implements "open_table".
DBI::DBD::SqlEngine::Table;
Contains tailoring between SQL engine's requirements and "DBI::DBD::SqlEngine" magic for finding the
right tables and storage. Builds bridges between "sql_meta" handling of "DBI::DBD::SqlEngine::db",
table initialization for SQL engines and meta object's attribute management for derived drivers.
DBI::DBD::SqlEngine
This is the main package containing the routines to initialize DBI::DBD::SqlEngine based DBI drivers.
Primarily the "DBI::DBD::SqlEngine::driver" method is invoked, either directly from DBI when the driver
is initialized or from the derived class.
package DBD::DBM;
use base qw( DBI::DBD::SqlEngine );
sub driver
{
my ( $class, $attr ) = @_;
...
my $drh = $class->SUPER::driver( $attr );
...
return $drh;
}
It is not necessary to implement your own driver method as long as additional initialization (e.g.
installing more private driver methods) is not required. You do not need to call "setup_driver" as
DBI::DBD::SqlEngine takes care of it.
DBI::DBD::SqlEngine::dr
The driver package contains the methods DBI calls indirectly via the DBI interface (see "DBI Class
Methods" in DBI).
DBI::DBD::SqlEngine based DBI drivers usually do not need to implement anything here, it is enough to do
the basic initialization:
package DBD:XXX::dr;
@DBD::XXX::dr::ISA = qw (DBI::DBD::SqlEngine::dr);
$DBD::XXX::dr::imp_data_size = 0;
$DBD::XXX::dr::data_sources_attr = undef;
$DBD::XXX::ATTRIBUTION = "DBD::XXX $DBD::XXX::VERSION by Hans Mustermann";
Methods provided by "DBI::DBD::SqlEngine::dr":
connect
Supervises the driver bootstrap when calling
DBI->connect( "dbi:Foo", , , { ... } );
First it instantiates a new driver using "DBI::_new_dbh". After that, initial bootstrap of the newly
instantiated driver is done by
$dbh->func( 0, "init_default_attributes" );
The first argument (0) signals that this is the very first call to "init_default_attributes". Modern
drivers understand that and do early stage setup here after calling
package DBD::Foo::db;
our @DBD::Foo::db::ISA = qw(DBI::DBD::SqlEngine::db);
sub init_default_attributes
{
my ($dbh, $phase) = @_;
$dbh->SUPER::init_default_attributes($phase);
...; # own setup code, maybe separated by phases
}
When the $phase argument is passed down until "DBI::DBD::SqlEngine::db::init_default_attributes",
"connect()" recognizes a modern driver and initializes the attributes from DSN and $attr arguments
passed via "DBI->connect( $dsn, $user, $pass, \%attr )".
At the end of the attribute initialization after phase 0, "connect()" invoked
"init_default_attributes" again for phase 1:
$dbh->func( 1, "init_default_attributes" );
data_sources
Returns a list of DSN's using the "data_sources" method of the class specified in
"$dbh->{sql_table_source}" or via "\%attr":
@ary = DBI->data_sources($driver);
@ary = DBI->data_sources($driver, \%attr);
disconnect_all
"DBI::DBD::SqlEngine" doesn't have an overall driver cache, so nothing happens here at all.
DBI::DBD::SqlEngine::db
This package defines the database methods, which are called via the DBI database handle $dbh.
Methods provided by "DBI::DBD::SqlEngine::db":
ping
Simply returns the content of the "Active" attribute. Override when your driver needs more
complicated actions here.
prepare
Prepares a new SQL statement to execute. Returns a statement handle, $sth - instance of the
DBD:XXX::st. It is neither required nor recommended to override this method.
validate_FETCH_attr
Called by "FETCH" to allow inherited drivers do their own attribute name validation. Calling
convention is similar to "FETCH" and the return value is the approved attribute name.
return $validated_attribute_name;
In case of validation fails (e.g. accessing private attribute or similar), "validate_FETCH_attr" is
permitted to throw an exception.
FETCH
Fetches an attribute of a DBI database object. Private handle attributes must have a prefix (this is
mandatory). If a requested attribute is detected as a private attribute without a valid prefix, the
driver prefix (written as $drv_prefix) is added.
The driver prefix is extracted from the attribute name and verified against "$dbh->{ $drv_prefix .
"valid_attrs" }" (when it exists). If the requested attribute value is not listed as a valid
attribute, this method croaks. If the attribute is valid and readonly (listed in "$dbh->{ $drv_prefix
. "readonly_attrs" }" when it exists), a real copy of the attribute value is returned. So it's not
possible to modify "f_valid_attrs" from outside of DBI::DBD::SqlEngine::db or a derived class.
validate_STORE_attr
Called by "STORE" to allow inherited drivers do their own attribute name validation. Calling
convention is similar to "STORE" and the return value is the approved attribute name followed by the
approved new value.
return ($validated_attribute_name, $validated_attribute_value);
In case of validation fails (e.g. accessing private attribute or similar), "validate_STORE_attr" is
permitted to throw an exception ("DBI::DBD::SqlEngine::db::validate_STORE_attr" throws an exception
when someone tries to assign value other than "SQL_IC_UPPER .. SQL_IC_MIXED" to
"$dbh->{sql_identifier_case}" or "$dbh->{sql_quoted_identifier_case}").
STORE
Stores a database private attribute. Private handle attributes must have a prefix (this is
mandatory). If a requested attribute is detected as a private attribute without a valid prefix, the
driver prefix (written as $drv_prefix) is added. If the database handle has an attribute
"${drv_prefix}_valid_attrs" - for attribute names which are not listed in that hash, this method
croaks. If the database handle has an attribute "${drv_prefix}_readonly_attrs", only attributes which
are not listed there can be stored (once they are initialized). Trying to overwrite such an immutable
attribute forces this method to croak.
An example of a valid attributes list can be found in
"DBI::DBD::SqlEngine::db::init_valid_attributes".
set_versions
This method sets the attributes "f_version", "sql_nano_version", "sql_statement_version" and (if not
prohibited by a restrictive "${prefix}_valid_attrs") "${prefix}_version".
This method is called at the end of the "connect ()" phase.
When overriding this method, do not forget to invoke the superior one.
init_valid_attributes
This method is called after the database handle is instantiated as the first attribute
initialization.
"DBI::DBD::SqlEngine::db::init_valid_attributes" initializes the attributes "sql_valid_attrs" and
"sql_readonly_attrs".
When overriding this method, do not forget to invoke the superior one, preferably before doing
anything else.
init_default_attributes
This method is called after the database handle is instantiated to initialize the default attributes.
It expects one argument: $phase. If $phase is not given, "connect" of "DBI::DBD::SqlEngine::dr"
expects this is an old-fashioned driver which isn't capable of multi-phased initialization.
"DBI::DBD::SqlEngine::db::init_default_attributes" initializes the attributes "sql_identifier_case",
"sql_quoted_identifier_case", "sql_handler", "sql_init_order", "sql_meta", "sql_engine_version",
"sql_nano_version" and "sql_statement_version" when SQL::Statement is available.
It sets "sql_init_order" to the given $phase.
When the derived implementor class provides the attribute to validate attributes (e.g.
"$dbh->{dbm_valid_attrs} = {...};") or the attribute containing the immutable attributes (e.g.
"$dbh->{dbm_readonly_attrs} = {...};"), the attributes "drv_valid_attrs", "drv_readonly_attrs" and
"drv_version" are added (when available) to the list of valid and immutable attributes (where "drv_"
is interpreted as the driver prefix).
get_versions
This method is called by the code injected into the instantiated driver to provide the user callable
driver method "${prefix}versions" (e.g. "dbm_versions", "csv_versions", ...).
The DBI::DBD::SqlEngine implementation returns all version information known by DBI::DBD::SqlEngine
(e.g. DBI version, Perl version, DBI::DBD::SqlEngine version and the SQL handler version).
"get_versions" takes the $dbh as the first argument and optionally a second argument containing a
table name. The second argument is not evaluated in "DBI::DBD::SqlEngine::db::get_versions" itself -
but might be in the future.
If the derived implementor class provides a method named "get_${drv_prefix}versions", this is invoked
and the return value of it is associated to the derived driver name:
if (my $dgv = $dbh->{ImplementorClass}->can ("get_" . $drv_prefix . "versions") {
(my $derived_driver = $dbh->{ImplementorClass}) =~ s/::db$//;
$versions{$derived_driver} = &$dgv ($dbh, $table);
}
Override it to add more version information about your module, (e.g. some kind of parser version in
case of DBD::CSV, ...), if one line is not enough room to provide all relevant information.
sql_parser_object
Returns a SQL::Parser instance, when "sql_handler" is set to "SQL::Statement". The parser instance is
stored in "sql_parser_object".
It is not recommended to override this method.
disconnect
Disconnects from a database. All local table information is discarded and the "Active" attribute is
set to 0.
type_info_all
Returns information about all the types supported by DBI::DBD::SqlEngine.
table_info
Returns a statement handle which is prepared to deliver information about all known tables.
list_tables
Returns a list of all known table names.
quote
Quotes a string for use in SQL statements.
commit
Warns about a useless call (if warnings enabled) and returns. DBI::DBD::SqlEngine is typically a
driver which commits every action instantly when executed.
rollback
Warns about a useless call (if warnings enabled) and returns. DBI::DBD::SqlEngine is typically a
driver which commits every action instantly when executed.
Attributes used by "DBI::DBD::SqlEngine::db":
This section describes attributes which are important to developers of DBI Database Drivers derived from
"DBI::DBD::SqlEngine".
sql_init_order
This attribute contains a hash with priorities as key and an array containing the $dbh attributes to
be initialized during before/after other attributes.
"DBI::DBD::SqlEngine" initializes following attributes:
$dbh->{sql_init_order} = {
0 => [qw( Profile RaiseError PrintError AutoCommit )],
90 => [ "sql_meta", $dbh->{$drv_pfx_meta} ? $dbh->{$drv_pfx_meta} : () ]
}
The default priority of not listed attribute keys is 50. It is well known that a lot of attributes
needed to be set before some table settings are initialized. For example, for DBD::DBM, when using
my $dbh = DBI->connect( "dbi:DBM:", undef, undef, {
f_dir => "/path/to/dbm/databases",
dbm_type => "BerkeleyDB",
dbm_mldbm => "JSON", # use MLDBM::Serializer::JSON
dbm_tables => {
quick => {
dbm_type => "GDBM_File",
dbm_MLDBM => "FreezeThaw"
}
}
});
This defines a known table "quick" which uses the GDBM_File backend and FreezeThaw as serializer
instead of the overall default BerkeleyDB and JSON. But all files containing the table data have to
be searched in "$dbh->{f_dir}", which requires "$dbh->{f_dir}" must be initialized before
"$dbh->{sql_meta}->{quick}" is initialized by "bootstrap_table_meta" method of
"DBI::DBD::SqlEngine::Table" to get "$dbh->{sql_meta}->{quick}->{f_dir}" being initialized properly.
sql_init_phase
This attribute is only set during the initialization steps of the DBI Database Driver. It contains
the value of the currently run initialization phase. Currently supported phases are phase 0 and phase
1. This attribute is set in "init_default_attributes" and removed in "init_done".
sql_engine_in_gofer
This value has a true value in case of this driver is operated via DBD::Gofer. The impact of being
operated via Gofer is a read-only driver (not read-only databases!), so you cannot modify any
attributes later - neither any table settings. But you won't get an error in cases you modify table
attributes, so please carefully watch "sql_engine_in_gofer".
sql_table_source
Names a class which is responsible for delivering data sources and available tables (Database Driver
related). data sources here refers to "data_sources" in DBI, not "sql_data_source".
See "DBI::DBD::SqlEngine::TableSource" for details.
sql_data_source
Name a class which is responsible for handling table resources open and completing table names
requested via SQL statements.
See "DBI::DBD::SqlEngine::DataSource" for details.
sql_dialect
Controls the dialect understood by SQL::Parser. Possible values (delivery state of SQL::Statement):
* ANSI
* CSV
* AnyData
Defaults to "CSV". Because an SQL::Parser is instantiated only once and SQL::Parser doesn't allow
one to modify the dialect once instantiated, it's strongly recommended to set this flag before any
statement is executed (best place is connect attribute hash).
DBI::DBD::SqlEngine::st
Contains the methods to deal with prepared statement handles:
bind_param
Common routine to bind placeholders to a statement for execution. It is dangerous to override this
method without detailed knowledge about the DBI::DBD::SqlEngine internal storage structure.
execute
Executes a previously prepared statement (with placeholders, if any).
finish
Finishes a statement handle, discards all buffered results. The prepared statement is not discarded
so the statement can be executed again.
fetch
Fetches the next row from the result-set. This method may be rewritten in a later version and if it's
overridden in a derived class, the derived implementation should not rely on the storage details.
fetchrow_arrayref
Alias for "fetch".
FETCH
Fetches statement handle attributes. Supported attributes (for full overview see "Statement Handle
Attributes" in DBI) are "NAME", "TYPE", "PRECISION" and "NULLABLE". Each column is returned as
"NULLABLE" which might be wrong depending on the derived backend storage. If the statement handle
has private attributes, they can be fetched using this method, too. Note that statement attributes
are not associated with any table used in this statement.
This method usually requires extending in a derived implementation. See DBD::CSV or DBD::DBM for
some example.
STORE
Allows storing of statement private attributes. No special handling is currently implemented here.
rows
Returns the number of rows affected by the last execute. This method might return "undef".
DBI::DBD::SqlEngine::TableSource
Provides data sources and table information on database driver and database handle level.
package DBI::DBD::SqlEngine::TableSource;
sub data_sources ($;$)
{
my ( $class, $drh, $attrs ) = @_;
...
}
sub avail_tables
{
my ( $class, $drh ) = @_;
...
}
The "data_sources" method is called when the user invokes any of the following:
@ary = DBI->data_sources($driver);
@ary = DBI->data_sources($driver, \%attr);
@ary = $dbh->data_sources();
@ary = $dbh->data_sources(\%attr);
The "avail_tables" method is called when the user invokes any of the following:
@names = $dbh->tables( $catalog, $schema, $table, $type );
$sth = $dbh->table_info( $catalog, $schema, $table, $type );
$sth = $dbh->table_info( $catalog, $schema, $table, $type, \%attr );
$dbh->func( "list_tables" );
Every time where an "\%attr" argument can be specified, this "\%attr" object's "sql_table_source"
attribute is preferred over the $dbh attribute or the driver default.
DBI::DBD::SqlEngine::DataSource
Provides base functionality for dealing with tables. It is primarily designed for allowing transparent
access to files on disk or already opened (file-)streams (e.g. for DBD::CSV).
Derived classes shall be restricted to similar functionality, too (e.g. opening streams from an archive,
transparently compress/uncompress log files before parsing them,
package DBI::DBD::SqlEngine::DataSource;
sub complete_table_name ($$;$)
{
my ( $self, $meta, $table, $respect_case ) = @_;
...
}
The method "complete_table_name" is called when first setting up the meta information for a table:
"SELECT user.id, user.name, user.shell FROM user WHERE ..."
results in opening the table "user". First step of the table open process is completing the name. Let's
imagine you're having a DBD::CSV handle with following settings:
$dbh->{sql_identifier_case} = SQL_IC_LOWER;
$dbh->{f_ext} = '.lst';
$dbh->{f_dir} = '/data/web/adrmgr';
Those settings will result in looking for files matching "[Uu][Ss][Ee][Rr](\.lst)?$" in
"/data/web/adrmgr/". The scanning of the directory "/data/web/adrmgr/" and the pattern match check will
be done in "DBD::File::DataSource::File" by the "complete_table_name" method.
If you intend to provide other sources of data streams than files, in addition to provide an appropriate
"complete_table_name" method, a method to open the resource is required:
package DBI::DBD::SqlEngine::DataSource;
sub open_data ($)
{
my ( $self, $meta, $attrs, $flags ) = @_;
...
}
After the method "open_data" has been run successfully, the table's meta information are in a state which
allows the table's data accessor methods will be able to fetch/store row information. Implementation
details heavily depends on the table implementation, whereby the most famous is surely DBD::File::Table.
DBI::DBD::SqlEngine::Statement
Derives from DBI::SQL::Nano::Statement for unified naming when deriving new drivers. No additional
feature is provided from here.
DBI::DBD::SqlEngine::Table
Derives from DBI::SQL::Nano::Table for unified naming when deriving new drivers.
You should consult the documentation of "SQL::Eval::Table" (see SQL::Eval) to get more information about
the abstract methods of the table's base class you have to override and a description of the table meta
information expected by the SQL engines.
bootstrap_table_meta
Initializes a table meta structure. Can be safely overridden in a derived class, as long as the
"SUPER" method is called at the end of the overridden method.
It copies the following attributes from the database into the table meta data "$dbh->{ReadOnly}" into
"$meta->{readonly}", "sql_identifier_case" and "sql_data_source" and makes them sticky to the table.
This method should be called before you attempt to map between file name and table name to ensure the
correct directory, extension etc. are used.
init_table_meta
Initializes more attributes of the table meta data - usually more expensive ones (e.g. those which
require class instantiations) - when the file name and the table name could mapped.
get_table_meta
Returns the table meta data. If there are none for the required table, a new one is initialized. When
after bootstrapping a new table_meta and completing the table name a mapping can be established
between an existing table_meta and the new bootstrapped one, the already existing is used and a
mapping shortcut between the recent used table name and the already known table name is hold in
"$dbh->{sql_meta_map}". When it fails, nothing is returned. On success, the name of the table and
the meta data structure is returned.
get_table_meta_attr
Returns a single attribute from the table meta data. If the attribute name appears in %compat_map,
the attribute name is updated from there.
set_table_meta_attr
Sets a single attribute in the table meta data. If the attribute name appears in %compat_map, the
attribute name is updated from there.
table_meta_attr_changed
Called when an attribute of the meta data is modified.
If the modified attribute requires to reset a calculated attribute, the calculated attribute is reset
(deleted from meta data structure) and the initialized flag is removed, too. The decision is made
based on %register_reset_on_modify.
register_reset_on_modify
Allows "set_table_meta_attr" to reset meta attributes when special attributes are modified. For
DBD::File, modifying one of "f_file", "f_dir", "f_ext" or "f_lockfile" will reset "f_fqfn". DBD::DBM
extends the list for "dbm_type" and "dbm_mldbm" to reset the value of "dbm_tietype".
If your DBD has calculated values in the meta data area, then call "register_reset_on_modify":
my %reset_on_modify = ( "xxx_foo" => "xxx_bar" );
__PACKAGE__->register_reset_on_modify( \%reset_on_modify );
register_compat_map
Allows "get_table_meta_attr" and "set_table_meta_attr" to update the attribute name to the current
favored one:
# from DBD::DBM
my %compat_map = ( "dbm_ext" => "f_ext" );
__PACKAGE__->register_compat_map( \%compat_map );
open_data
Called to open the table's data storage. This is silently forwarded to
"$meta->{sql_data_source}->open_data()".
After this is done, a derived class might add more steps in an overridden "open_file" method.
new Instantiates the table. This is done in 3 steps:
1. get the table meta data
2. open the data file
3. bless the table data structure using inherited constructor new
It is not recommended to override the constructor of the table class. Find a reasonable place to add
you extensions in one of the above four methods.
AUTHOR
The module DBI::DBD::SqlEngine is currently maintained by
H.Merijn Brand < h.m.brand at xs4all.nl > and Jens Rehsack < rehsack at googlemail.com >
COPYRIGHT AND LICENSE
Copyright (C) 2010 by H.Merijn Brand & Jens Rehsack
All rights reserved.
You may freely distribute and/or modify this module under the terms of either the GNU General Public
License (GPL) or the Artistic License, as specified in the Perl README file.
perl v5.34.0 2022-02-06 DBI::DBD::SqlEngine::Developers(3pm)