Ubuntu Manpage: mbind - set memory policy for a memory range

Provided by: manpages-dev_5.10-1ubuntu1_all

NAME

       mbind - set memory policy for a memory range

SYNOPSIS

       #include <numaif.h>

       long mbind(void *addr, unsigned long len, int mode,
                  const unsigned long *nodemask, unsigned long maxnode,
                  unsigned flags);

       Link with -lnuma.

DESCRIPTION

mbind() sets the NUMA memory policy, which consists of a policy mode and zero or more nodes, for the
memory range starting with addr and continuing for len bytes. The memory policy defines from which node
memory is allocated.

If the memory range specified by the addr and len arguments includes an "anonymous" region of memory—that
is a region of memory created using the mmap(2) system call with the MAP_ANONYMOUS—or a memory-mapped
file, mapped using the mmap(2) system call with the MAP_PRIVATE flag, pages will be allocated only
according to the specified policy when the application writes (stores) to the page. For anonymous
regions, an initial read access will use a shared page in the kernel containing all zeros. For a file
mapped with MAP_PRIVATE, an initial read access will allocate pages according to the memory policy of the
thread that causes the page to be allocated. This may not be the thread that called mbind().

The specified policy will be ignored for any MAP_SHARED mappings in the specified memory range. Rather
the pages will be allocated according to the memory policy of the thread that caused the page to be
allocated. Again, this may not be the thread that called mbind().

If the specified memory range includes a shared memory region created using the shmget(2) system call and
attached using the shmat(2) system call, pages allocated for the anonymous or shared memory region will
be allocated according to the policy specified, regardless of which process attached to the shared memory
segment causes the allocation. If, however, the shared memory region was created with the SHM_HUGETLB
flag, the huge pages will be allocated according to the policy specified only if the page allocation is
caused by the process that calls mbind() for that region.

By default, mbind() has an effect only for new allocations; if the pages inside the range have been
already touched before setting the policy, then the policy has no effect. This default behavior may be
overridden by the MPOL_MF_MOVE and MPOL_MF_MOVE_ALL flags described below.

The mode argument must specify one of MPOL_DEFAULT, MPOL_BIND, MPOL_INTERLEAVE, MPOL_PREFERRED, or
MPOL_LOCAL (which are described in detail below). All policy modes except MPOL_DEFAULT require the
caller to specify the node or nodes to which the mode applies, via the nodemask argument.

The mode argument may also include an optional mode flag. The supported mode flags are:

MPOL_F_STATIC_NODES (since Linux-2.6.26)
A nonempty nodemask specifies physical node IDs. Linux does not remap the nodemask when the
thread moves to a different cpuset context, nor when the set of nodes allowed by the thread's
current cpuset context changes.

MPOL_F_RELATIVE_NODES (since Linux-2.6.26)
A nonempty nodemask specifies node IDs that are relative to the set of node IDs allowed by the
thread's current cpuset.

nodemask points to a bit mask of nodes containing up to maxnode bits. The bit mask size is rounded to
the next multiple of sizeof(unsigned long), but the kernel will use bits only up to maxnode. A NULL
value of nodemask or a maxnode value of zero specifies the empty set of nodes. If the value of maxnode
is zero, the nodemask argument is ignored. Where a nodemask is required, it must contain at least one
node that is on-line, allowed by the thread's current cpuset context (unless the MPOL_F_STATIC_NODES mode
flag is specified), and contains memory.

The mode argument must include one of the following values:

MPOL_DEFAULT
This mode requests that any nondefault policy be removed, restoring default behavior. When
applied to a range of memory via mbind(), this means to use the thread memory policy, which may
have been set with set_mempolicy(2). If the mode of the thread memory policy is also
MPOL_DEFAULT, the system-wide default policy will be used. The system-wide default policy
allocates pages on the node of the CPU that triggers the allocation. For MPOL_DEFAULT, the
nodemask and maxnode arguments must be specify the empty set of nodes.

MPOL_BIND
This mode specifies a strict policy that restricts memory allocation to the nodes specified in
nodemask. If nodemask specifies more than one node, page allocations will come from the node with
sufficient free memory that is closest to the node where the allocation takes place. Pages will
not be allocated from any node not specified in the IR nodemask . (Before Linux 2.6.26, page
allocations came from the node with the lowest numeric node ID first, until that node contained no
free memory. Allocations then came from the node with the next highest node ID specified in
nodemask and so forth, until none of the specified nodes contained free memory.)

MPOL_INTERLEAVE
This mode specifies that page allocations be interleaved across the set of nodes specified in
nodemask. This optimizes for bandwidth instead of latency by spreading out pages and memory
accesses to those pages across multiple nodes. To be effective the memory area should be fairly
large, at least 1 MB or bigger with a fairly uniform access pattern. Accesses to a single page of
the area will still be limited to the memory bandwidth of a single node.

MPOL_PREFERRED
This mode sets the preferred node for allocation. The kernel will try to allocate pages from this
node first and fall back to other nodes if the preferred nodes is low on free memory. If nodemask
specifies more than one node ID, the first node in the mask will be selected as the preferred
node. If the nodemask and maxnode arguments specify the empty set, then the memory is allocated
on the node of the CPU that triggered the allocation.

MPOL_LOCAL (since Linux 3.8)
This mode specifies "local allocation"; the memory is allocated on the node of the CPU that
triggered the allocation (the "local node"). The nodemask and maxnode arguments must specify the
empty set. If the "local node" is low on free memory, the kernel will try to allocate memory from
other nodes. The kernel will allocate memory from the "local node" whenever memory for this node
is available. If the "local node" is not allowed by the thread's current cpuset context, the
kernel will try to allocate memory from other nodes. The kernel will allocate memory from the
"local node" whenever it becomes allowed by the thread's current cpuset context. By contrast,
MPOL_DEFAULT reverts to the memory policy of the thread (which may be set via set_mempolicy(2));
that policy may be something other than "local allocation".

If MPOL_MF_STRICT is passed in flags and mode is not MPOL_DEFAULT, then the call fails with the error EIO
if the existing pages in the memory range don't follow the policy.

If MPOL_MF_MOVE is specified in flags, then the kernel will attempt to move all the existing pages in the
memory range so that they follow the policy. Pages that are shared with other processes will not be
moved. If MPOL_MF_STRICT is also specified, then the call fails with the error EIO if some pages could
not be moved.

If MPOL_MF_MOVE_ALL is passed in flags, then the kernel will attempt to move all existing pages in the
memory range regardless of whether other processes use the pages. The calling thread must be privileged
(CAP_SYS_NICE) to use this flag. If MPOL_MF_STRICT is also specified, then the call fails with the error
EIO if some pages could not be moved.

RETURN VALUE

       On success, mbind() returns 0; on error, -1 is returned and errno is set to indicate the error.

ERRORS

       EFAULT Part or all of the memory range specified by nodemask and maxnode points outside  your  accessible
              address space.  Or, there was an unmapped hole in the specified memory range specified by addr and
              len.

       EINVAL An invalid value was specified for flags or mode; or addr + len was less than addr; or addr is not
              a  multiple  of  the system page size.  Or, mode is MPOL_DEFAULT and nodemask specified a nonempty
              set; or mode is MPOL_BIND or MPOL_INTERLEAVE and nodemask is empty.  Or, maxnode exceeds a kernel-
              imposed limit.  Or, nodemask specifies one or more node IDs that  are  greater  than  the  maximum
              supported  node ID.  Or, none of the node IDs specified by nodemask are on-line and allowed by the
              thread's current cpuset context, or none of the specified nodes  contain  memory.   Or,  the  mode
              argument specified both MPOL_F_STATIC_NODES and MPOL_F_RELATIVE_NODES.

       EIO    MPOL_MF_STRICT  was  specified and an existing page was already on a node that does not follow the
              policy; or MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified and the kernel was unable  to  move  all
              existing pages in the range.

       ENOMEM Insufficient kernel memory was available.

       EPERM  The  flags  argument  included  the  MPOL_MF_MOVE_ALL  flag  and  the  caller  does  not  have the
              CAP_SYS_NICE privilege.

VERSIONS

       The mbind() system call was added to the Linux kernel in version 2.6.7.

CONFORMING TO

       This system call is Linux-specific.

NOTES

       For information on library support, see numa(7).

       NUMA policy is not supported on a memory-mapped file range that was mapped with the MAP_SHARED flag.

       The MPOL_DEFAULT mode can have different effects for mbind() and set_mempolicy(2).  When MPOL_DEFAULT  is
       specified  for set_mempolicy(2), the thread's memory policy reverts to the system default policy or local
       allocation.  When MPOL_DEFAULT is specified for a range of memory using mbind(), any  pages  subsequently
       allocated  for  that  range  will  use  the  thread's  memory  policy,  as set by set_mempolicy(2).  This
       effectively removes the explicit policy from the specified range, "falling back" to a possibly nondefault
       policy.  To select explicit "local allocation" for a memory  range,  specify  a  mode  of  MPOL_LOCAL  or
       MPOL_PREFERRED with an empty set of nodes.  This method will work for set_mempolicy(2), as well.

       Support  for  huge page policy was added with 2.6.16.  For interleave policy to be effective on huge page
       mappings the policied memory needs to be tens of megabytes or larger.

       Before Linux 5.7.  MPOL_MF_STRICT was ignored on huge page mappings.

       MPOL_MF_MOVE and MPOL_MF_MOVE_ALL are available only on Linux 2.6.16 and later.

COLOPHON

       This page is part of release 5.10 of  the  Linux  man-pages  project.   A  description  of  the  project,
       information   about   reporting   bugs,   and   the  latest  version  of  this  page,  can  be  found  at
       https://www.kernel.org/doc/man-pages/.

Linux                                              2020-06-09                                           MBIND(2)