Ubuntu Manpage: grap — Kernighan and Bentley's language for typesetting graphs

NAME

       grap — Kernighan and Bentley's language for typesetting graphs

SYNOPSIS

       grap [-d defines_file] [-D] [-l] [-M include path] [-R] [-r] [-v] [-u] [-C] [-c] [-h] [filename ...]

DESCRIPTION

grap is an implementation of Kernighan and Bentley's language for typesetting graphs, as described in
``Grap-A Language for Typesetting Graphs, Tutorial and User Manual,'' by Jon L. Bentley and Brian W.
Kernighan, revised May 1991, which is the primary source for information on how to use grap. As of this
writing, it is available electronically at http://www.kohala.com/start/troff/cstr114.ps. Additional
documentation and examples, packaged with grap, may have been installed locally as well. If available,
paths to them can be displayed using grap -h or grap -v (or grap --help / grap --version)

This version is a black box implementation of grap, and some inconsistencies are to be expected. The
remainder of this manual page will briefly outline the grap language as implemented here.

grap is a pic(1) pre-processor. It takes commands embedded in a troff(1) source file which are
surrounded by .G1 and .G2 macros, and rewrites them into pic commands to display the graph. Other lines
are copied. Output is always to the standard output, which is usually redirected. Input is from the
given filenames, which are read in order. A filename of - is the standard input. If no filenames are
given, input is read from the standard input.

Because grap is a pic preprocessor, and GNU pic will output TeX, it is possible to use grap with TeX.

The -d option specifies a file of macro definitions to be read at startup, and defaults to
/usr/share/grap/grap.defines . The -D option inhibits the reading of any initial macros file (the -l
flag is a synonym for -D, though I do not remember why). The defines file can also be given using the
GRAP_DEFINES environment variable. (See below).

-v prints the version information on the standard output and exits. --version is a synonym for -v.

-u makes labels unaligned by default. This version of grap uses new features of GNU pic to align the
left and right labels with the axes, that is that the left and right labels run at right angles to the
text of the paper. This may be useful in porting old grap programs. -c makes plot strings unclipped by
default. Some versions of grap allow users to place a string anywhere in the coordinate space, rather
than only in the frame. By default this version of grap does not plot any string centered outside the
frame. -c allows strings to be placed anywhere. See also the clipped and unclipped string modifiers
described in the plot statement.

-M is followed by a colon-separated list of directories used to search for relative pathnames included
via copy. The path is also used to locate the defines file, so if the -d changes the defines file name
to a relative name, it will be searched for in the path given by -M. The search path always includes the
current directory, and by default that directory is searched last.

All numbers used internally by grap are double precision floating point values. Sometimes using floating
point numbers has unintended consequences. To help avoid these problems, grap can use two thresholds for
comparison of floating point numbers, set by -R or -r. The -R flag sets coarse comparison mode, which is
suitable for most applications. If you are plotting small values – less than 1e-6 or so – consider using
-r which uses very fine comparisons between numbers. You may also want to rescale your plotted values to
be larger in magnitude. The coarse comarisons are used by default.

To be precise, the value by which two numbers must differ for grap to consider them not equal is called
the comparison limit and the smallest non-zero number is called the minimum value. The values a given
version of grap uses for these are included in the output of -v or -h.

All grap commands are included between .G1 and .G2 macros, which are consumed by grap. The output
contains pic between .PS and .PE macros. Any arguments to the .G1 macro in the input are arguments to
the .PS macro in the output, so graphs can be scaled just like pic diagrams. If -C is given, any macro
beginning with .G1 or .G2 is treated as a .G1 or .G2 macro, for compatibility with old versions of troff.
Using -C also forces pure troff syntax on embedded font change commands when strings have the size
attribute, and all strings to be unclipped.

The -h flag prints a brief help message and exits. --help is a synonym for -h.

It is possible for someone to cause grap to fail by passing a bad format string and data to the sprintf
command. If grap is integrated as part of the printing system, this could conceivably provided a path to
breaching security on the machine. If you choose to use grap as part of a printing system run by the
super-user, you should disable sprintf commands. This can be done by calling grap with the -S flag,
setting the GRAP_SAFER environment variable, or compiling with the GRAP_SAFER preprocessor symbol
defined. (The GNU configure script included with grap will define that preprocessor symbol if the
--with-grap-safe option is given.)

The grap commands are sketched below. Refer to Kernighan and Bentley's paper for the details.

New versions of groff(1) will invoke grap if -G is given.

Commands
Commands are separated from one another by newlines or semicolons (;).

frame [line_description] [ht height | wid width] [[(top|bottom|left| right) line_description] ...]

frame [ht height | wid width] [line_description] [[(top|bottom|left| right) line_description] ...]

This describes how the axes for the graph are drawn. A line_description is a pic line description,
e.g., dashed 0.5, or the literal solid. It may also include a color keyword followed by the color
to draw the string in double quotes. Any color understood by the underlying groff system can be
used. Color can only be used under GNU pic, and is not available in compatibility mode.
Similarly, for pic implementations that understand thickness, that attribute may be used with a
real valued parameter. Thickness is not available in compatibility mode.

If the first line_description is given, the frame is drawn with that style. The default is solid.
The height and width of the frame can also be specified in inches. The default line style can be
over-ridden for sides of the frame by specifying additional parameters to frame.

If no plotting commands have been given before the frame command is issued, the frame will be
output at that point in the plotting stream relative to embedded troff or pic commands. Otherwise
the frame is output before the first plotted object (even invisible ones).

ht and wid are in inches by default, but can be any groff unit. If omitted, the dimensions are 2
inches high by 3 inches wide.

coord [name] [x expr, expr] [y expr, expr] [log x | log y | log log]

The coord command specifies a new coordinate system or sets limits on the default system. It
defines the largest and smallest values that can be plotted, and therefore the scale of the data in
the frame. The limits for the x and y coordinate systems can be given separately. If a name is
given, that coordinate system is defined, if not the default system is modified.

A coordinate system created by one coord command may be modified by subsequent coord commands. A
grap program may declare a coordinate space using coord, copy a file of data through a macro that
plots the data and finds its maxima and minima, and then define the size of the coordinate system
with a second coord statement.

This command also determines if a scale is plotted logarithmically. log log means the same thing
as log x log y.

draw [line_name] [line_description] [plot_string]

The draw command defines the style with which a given line will be plotted. If line_name is given,
the style is associated with that name, otherwise the default style is set. line_description is a
pic line description, and the optional plot_string is a string to be centered at each point. The
default line description is invis, and the default plotting string is a centered bullet, so by
default each point is a filled circle, and they are unconnected. If points are being connected,
each draw command ends any current line and begins a new one.

When defining a line style, that is the first draw command for a given line name, specifying no
plot string means that there are to be no plot strings. Omitting the plot string on subsequent
draw commands addressing the same named line means not to change the plot string. If a line has
been defined with a plot string, and the format is changed by a subsequent draw statement, the plot
string can be removed by specifying "" in the draw statement.

The plot string can have its format changed through several string_modifiers. String_modifiers are
described in the description of the plot command.

The standard defines file includes several macros useful as plot strings, including bullet, square,
and delta.

new is a synonym for draw.

next [line_name] at [coordinates_name] expr, expr [line_description]

The next command plots the given point using the line style given by line_name, or the default if
none is given. If line_name is given, it should have been defined by an earlier draw command, if
not a new line style with that name is created, initialized the same way as the default style. The
two expressions give the point's x and y values, relative to the optional coordinate system. That
system should have been defined by an earlier coord command, if not, grap will exit. If the
optional line_description is given, it overrides the style's default line description. You cannot
over-ride the plotting string. To use a different plotting string use the plot command.

The coordinates may optionally be enclosed in parentheses: (expr, expr)

quoted_string [string_modifiers] [, quoted_string [string_modifiers]] ... at [coordinates_name] expr,
expr

plot expr [format_string] at [coordinates_name] expr, expr

These commands both plot a string at the given point. In the first case the literal strings are
stacked above each other. The string_modifiers include the pic justification modifiers (ljust,
rjust, above, and below), and absolute and relative size modifiers. See the pic documentation for
the description of the justification modifiers. grap also supports the aligned and unaligned
modifiers which are briefly noted in the description of the label command.

The standard defines file includes several macros useful as plot strings, including bullet, square,
and delta.

Strings placed by either format of the plot command are restricted to being within the frame. This
can be overridden by using the unclipped attribute, which allows a string to be plotted in or out
of the frame. The -c and -C flags set unclipped on all strings, and to prevent a string from being
plotted outside the frame when those flags are active, the clipped attribute can be used to retore
clipping behavior. Though clipped or unclipped can be applied to any string, it only has meaning
for plot statements.

size expr sets the string size to expr points. If expr is preceded by a + or -, the size is
increased or decreased by that many points.

If color and a color name in double quotes appears, the string will be rendered in that color under
a version of GNU troff that supports color. Color is not available in compatibility mode.

In the second version, the expr is converted to a string and placed on the graph. format_string is
a printf(3) format string. Only formatting escapes for printing floating point numbers make sense.
The format string is only respected if the sprintf command is also active. See the description of
sprintf for the various ways to disable it. Plot and sprintf respond differently when grap is
running safely. Sprintf ignores any arguments, passing the format string through without
substitution. plot ignores the format string completely, plotting expr using the "%g" format.

Points are specified the same way as for next commands, with the same consequences for undefined
coordinate systems.

The second form of this command is because the first form can be used with a grap sprintf
expression (See “Expressions”).

ticks [left|right|top|bottom] off

This command controls the placement of ticks on the frame. By default, ticks are automatically
generated on the left and bottom sides of the frame.

The first version of this command turns on the automatic tick generation for a given side. The in
or out parameter controls the direction and length of the ticks. If a coord_name is specified, the
ticks are automatically generated using that coordinate system. If no system is specified, the
default coordinate system is used. As with next and plot, the coordinate system must be declared
before the ticks statement that references it. This syntax for requesting automatically generated
ticks is an extension, and will not port to older grap implementations.

The second version of the ticks command overrides the automatic placement of the ticks by
specifying a list of coordinates at which to place the ticks. If the ticks are not defined with
respect to the default coordinate system, the coord_name parameter must be given. For each tick a
printf(3) style format string can be given. The format_string defaults to "%g". The format string
can also take string modifiers as described in the plot command. To place ticks with no labels,
specify format_string as "".

If sprintf is disabled, ticks behaves as plot with respect to the format string.

The labels on the ticks may be shifted by specifying a direction and the distance in inches to
offset the label. That is the optional direction and expression immediately preceding the at.

The third format of the ticks command over-rides the default tick generation with a set of ticks ar
regular intervals. The syntax is reminiscent of programming language for loops. Ticks are placed
starting at start_expr ending at end_expr one unit apart. If the by clause is specified, ticks are
by_expr units apart. If an operator appears before by_expr each tick is operated on by that
operator instead of +. For example

ticks left out from 2 to 32 by *2

will put ticks at 2, 4, 8, 16, and 32. If format_string is specified, all ticks are formatted
using it.

The parameters preceding the from act as described above.

The at and for forms of tick command may both be issued on the same side of a frame. For example:

ticks left out from 2 to 32 by *2
ticks left in 3, 5, 7

will put ticks on the left side of the frame pointing out at 2, 4, 8, 16, and 32 and in at 3, 5,
and 7.

The final form of ticks turns off ticks on a given side. If no side is given the ticks for all
sides are cancelled.

tick is a synonym for ticks.

The grid command is similar to the ticks command except that grid specifies the placement of lines
in the frame. The syntax is similar to ticks as well.

By specifying ticks off in the command, no ticks are drawn on that side of the frame. If ticks
appear on a side by default, or have been declared by an earlier ticks command, grid does not
cancel them unless ticks off is specified.

Instead of a direction for ticks, grid allows the user to pick a line description for the grid
lines. The usual pic line descriptions are allowed.

Grids are labelled by default. To omit labels, specify the format string as "".

If sprintf is disabled, grid behaves as plot with respect to the format string.

The label command places a label on the given axis. It is possible to specify several labels,
which will be stacked over each other as in pic. The final argument, if present, specifies how
many inches the label is shifted from the axis.

By default the labels on the left and right labels run parallel to the frame. You can cancel this
by specifying unaligned as a string_modifier.

circle at [coordinate_name] expr, expr [radius expr] [linedesc]

This draws an circle at the point indicated. By default, the circle is small, 0.025 inches. This
can be over-ridden by specifying a radius. The coordinates of the point are relative to the named
coordinate system, or the default system if none is specified.

This command has been extended to take a line description, e.g., dotted. It also accepts the
filling extensions described below in the bar command. It will also accept a color keyword that
gives the color of the outline of the circle in double quotes and a fillcolor command that sets the
color to fill the circle with similarly. Colors are only available when compatibility mode is off,
and using a version of GNU pic that supports color.

line [line_description] from [coordinate_name] expr, expr to [coordinate_name] expr, expr
[line_description]

arrow [line_description] from [coordinate_name] expr, expr to [coordinate_name] expr, expr
[line_description]

This draws a line or arrow from the first point to the second using the given style. The default
line style is solid. The line_description can be given either before the from or after the to
clause. If both are given the second is used. It is possible to specify one point in one
coordinate system and one in another, note that if both points are in a named coordinate system
(even if they are in the same named coordinate system), both points must have coordinate_name
given.

copy ["filename"] [until "string"] [thru macro]

The copy command imports data from another file into the current graph. The form with only a
filename given is a simple file inclusion; the included file is simply read into the input stream
and can contain arbitrary grap commands. The more common case is that it is a number list; see
“Number Lists” below.

The second form takes lines from the file, splits them into words delimited by one or more spaces,
and calls the given macro with those words as parameters. The macro may either be defined here, or
be a macro defined earlier. See “Macros” for more information on macros.

The filename may be omitted if the until clause is present. If so the current file is treated as
the input file until string is encountered at the beginning of the line.

copy is one of the workhorses of grap. Check out the paper and /usr/share/doc/grap/examples for
more details. Confirm the location of the examples directory using the -v flag.
print (expr|string)

Prints its argument to the standard error.

sh block

This passes block to sh(1). Unlike K&B grap no macro or variable expansion is done. I believe
that this is also true for GNU pic version 1.10. See the “Macros” section for information on
defining blocks.

pic pic_statement

This issues the given pic statements in the enclosing .PS and .PE at the point where the command
is issued.

Statements that begin with a period are considered to be troff(statements) and are output in the
enclosing .PS and .PE at the point where the command appears.

For the purposes of relative placement of pic or troff commands, the frame is output immediately
before the first plotted object, or the frame statement, if any. If the user specifies pic or
troff commands and neither any plotable object nor a frame command, the commands will not be
output.

graph Name pic_commands

This command is used to position graphs with respect to each other. The current graph is given the
pic name Name (names used by pic begin with capital letters). Any pic commands following the graph
are used to position the next graph. The frame of the graph is available for use with pic name
Frame. The following places a second graph below the first:

graph Linear
[ graph description ]
graph Exponential with .Frame.n at \
Linear.Frame.s - (0, .05)
[ graph description ]

name = expr

This assigns expr to the variable name. grap has only numeric (double) variables.

Assignment creates a variable if it does not exist. Variables persist across graphs. Assignments
can cascade; a = b = 35 assigns 35 to a and b.

bar (up|right) [coordinates_name] offset ht height [wid width] [base base_offset] [line_description]

bar [coordinates_name] expr, expr, [coordinates_name] expr, expr, [line_description]

The bar command facilitates drawing bar graphs. The first form of the command describes the bar
somewhat generally and has grap place it. The bar may extend up or to the right, is centered on
offset and extends up or right height units (in the given coordinate system). For example

bar up 3 ht 2

draws a 2 unit high bar sitting on the x axis, centered on x=3. By default bars are 1 unit wide,
but this can be changed with the wid keyword. By default bars sit on the base axis, i.e., bars
directed up will extend from y=0. That may be overridden by the base keyword. (The bar described
above has corners (2.5, 0) and (3.5, 2).)

The line description has been extended to include a fill expr keyword that specifies the shading
inside the bar. Bars may be drawn in any line style. They support the color and fillcolor
keywords described under circle.

The second form of the command draws a box with the two points as corners. This can be used to
draw boxes highlighting certain data as well as bar graphs. Note that filled bars will cover data
drawn under them.

Control Flow
if expr then block [else block]

The if statement provides simple conditional execution. If expr is non-zero, the block after the
then statement is executed. If not the block after the else is executed, if present. See “Macros”
for the definition of blocks. Early versions of this implementation of grap treated the blocks as
macros that were defined and expanded in place. This led to unnecessary confusion because explicit
separators were sometimes called for. Now, grap inserts a separator (;) after the last character
in block, so constructs like

if (x == 3) { y = y + 1 }
x = x + 1

behave as expected. A separator is also appended to the end of a for block.

for name from from_expr to to_expr [by [+|-|*|/] by_expr] do block

This command executes block iteratively. The variable name is set to from_expr and incremented by
by_expr until it exceeds to_expr. The iteration has the semantics defined in the ticks command.
The definition of block is discussed in “Macros”. See also the note about implicit separators in
the description of the if command.

An = can be used in place of from.

Expressions
grap supports most standard arithmetic operators: + - / * ^. The carat (^) is exponentiation. In an if
statement grap also supports the C logical operators ==, !=, &&, || and unary !. Also in an if, == and
!= are overloaded for the comparison of quoted strings. Parentheses are used for grouping.

Assignment is not allowed in an expression in any context, except for simple cascading of assignments. a
= b = 35 works as expected; a = 3.5 * (b = 10) does not execute.

grap supports the following functions that take one argument: log, exp, int, sin, cos, sqrt, rand, floor,
ceil. The logarithms are base 10 and the trigonometric functions are in radians. eexp returns Euler's
number to the given power and ln returns the natural logarithm. The natural log, exponentiation
functions and floor and ceil are extensions and are probably not available in other grap implementations.

rand returns a random number uniformly distributed on [0,1). The following two-argument functions are
supported: atan2, min, max. atan2 works just like atan2(3). The random number generator can be seeded
by calling srand with a single parameter (converted internally to an integer). Because its return value
is of no use, you must use srand as a separate statement, it is not part of a valid expression. srand is
not portable.

The getpid function takes no arguments and returns the process id. This may be used to seed the random
number generator, but do not expect cryptographically random values to result.

Other than string comparison, no expressions can use strings. One string valued function exists: sprintf
(format, [expr [, expr]] ). It operates like sprintf(3), except returning the value. It can be used
anywhere a quoted string is used. If grap is run with -S, the environment variable GRAP_SAFER is
defined, or grap has been compiled for safer operation, the sprintf command will return the format
string. This mode of operation is only intended to be used only if grap is being used as part of a
super-user enabled print system.

grap version 1.44 and beyond support two functions for date and time manipulation, strptime and strptime.
strptime parses a time using the strptime(3) function. It takes two parameters, both strings, the format
and a string to parse using that format and returns a number that can be sorted directly - the number of
seconds since the UNIX epoch. strftime does the reverse. It takes a string and a number and formats the
number into a date. In both functions, the format is the first parameter. The formats are defined in
the documentation for strftime(3).

Macros
grap has a simple but powerful macro facility. Macros are defined using the define command :

define name block
undefine name

Every occurrence of name in the program text is replaced by the contents of block. block is
defined by a series of statements in nested { }'s, or a series of statements surrounded by the same
letter. An example of the latter is

define foo X coord x 1,3 X
Each time foo appears in the text, it will be replaced by coord x 1,3. Macros are literal, and can
contain newlines. If a macro does not span multiple lines, it should end in a semicolon to avoid
parsing errors.

Macros can take parameters, too. If a macro call is followed by a parenthesized, comma-separated
list the values starting with $1 will be replaced in the macro with the elements of the list. A $
not followed by a digit is left unchanged. This parsing is very rudimentary; no nesting or
parentheses or escaping of commas is allowed. Also, there is no way to say argument 1 followed by
a digit (${1}0 in sh(1)).

The following will draw a line with slope 1.

define foo { next at $1, $2 }
for i from 1 to 5 { foo(i,i) }
Macros persist across graphs. The file /usr/share/grap/grap.defines contains simple macros for
plotting common characters. The undefine command deletes a macro.

See the directory /usr/share/doc/grap/examples for more examples of macros. Confirm the location
of the examples directory using the -v flag.

Number Lists
A whitespace-separated list of numbers is treated specially. The list is taken to be points to be
plotted using the default line style on the default coordinate system. If more than two numbers are
given, the extra numbers are taken to be additional y values to plot at the first x value. Number lists
in DWB grap can be comma-separated, and this grap supports that as well. More precisely, numbers in
number lists can be separated by either whitespace, commas, or both.

1 2 3
4 5 6

Will plot points using the default line style at (1,2), (1,3),(4,5) and (4,6). A simple way to plot a
set of numbers in a file named ./data is:

.G1
copy "./data"
.G2

Pic Macros
grap defines pic macros that can be used in embedded pic code to place elements in the graph. The macros
are x_gg, y_gg, and xy_gg. These macros define pic distances that correspond to the given argument.
They can be used to size boxes or to plot pic constructs on the graph. To place a given construct on the
graph, you should add Frame.Origin to it. Other coordinate spaces can be used by replacing gg with the
name of the coordinate space. A coordinate space named gg cannot be reliably accessed by these macros.

The macros are emitted immediately before the frame is drawn.

DWB grap may use these as part of its implementation. This grap provides them only for compatibility.
Note that these are very simple macros, and may not do what you expect under complex conditions.

ENVIRONMENT VARIABLES

       If the environment variable GRAP_DEFINES is defined, grap will look for its defines file there.  If  that
       value  is a relative path name the path specified in the -M option will be searched for it.  GRAP_DEFINES
       overrides the compiled in location of the defines file, but may be overridden by the -d or -D flags.

       If GRAP_SAFER is set, sprintf is disabled to prevent forcing grap to core dump or smash the stack.

FILES

       /usr/share/grap/grap.defines

BUGS

       There  are  several  small  incompatibilities  with  K&R grap.  They include the sh command not expanding
       variables and macros, and a more strict adherence to parameter order in the internal commands.

       Although much improved, the error reporting code can still be confused.  Notably, an error in a macro  is
       not detected until the macro is used, and it produces unusual output in the error message.

       Iterating many times over a macro with no newlines can run grap out of memory.

AUTHOR

       This  implementation  was  done  by  Ted Faber <faber@lunabase.org>.  Bruce Lilly <bruce.lilly@gmail.com>
       contributed many bug fixes, including a considerable revamp of the error  reporting  code.   If  you  can
       actually find an error in your grap code, you can probably thank him.  grap was designed and specified by
       Brian Kernighan and Jon Bentley.

Debian                                           March 11, 2006                                          GRAP(1)