Provided by: posh_0.14.1_amd64 
NAME
posh - Policy-compliant Ordinary SHell
SYNOPSIS
posh [+-aCefilnuvx] [+-o option] [[-c command-string [command-name] | -s | file ] [argument...]]
DESCRIPTION
posh is a reimplementation of the Bourne shell, a command interpreter for both interactive and script
use.
Shell Startup
The following options can be specified only on the command line:
-c command-string
the shell executes the command(s) contained in command-string
-i
interactive mode — see below
-l
login shell — see below interactive mode — see below
-s
the shell reads commands from standard input; all non-option arguments are positional parameters
In addition to the above, the options described in the set builtin command can also be used on the
command line.
If neither the -c nor the -s options are specified, the first non-option argument specifies the name of a
file the shell reads commands from; if there are no non-option arguments, the shell reads commands from
standard input. The name of the shell (i.e., the contents of the $0) parameter is determined as follows:
if the -c option is used and there is a non-option argument, it is used as the name; if commands are
being read from a file, the file is used as the name; otherwise the name the shell was called with (i.e.,
argv[0]) is used.
A shell is interactive if the -i option is used or if both standard input and standard error are attached
to a tty. An interactive shell has job control enabled (if available), ignores the INT, QUIT and TERM
signals, and prints prompts before reading input (see PS1 and PS2 parameters).
A shell is privileged if the -p option is used or if the real user-id or group-id does not match the
effective user-id or group-id (see getuid(2), getgid(2)). A privileged shell does not process
$HOME/.profile. Instead the file /etc/suid_profile is processed. Clearing the privileged option causes
the shell to set its effective user-id (group-id) to its real user-id (group-id).
If the basename of the name the shell is called with (i.e., argv[0]) starts with - or if the -l option is
used, the shell is assumed to be a login shell and the shell reads and executes the contents of
/etc/profile and $HOME/.profile if they exist and are readable.
The exit status of the shell is 127 if the command file specified on the command line could not be
opened, or non-zero if a fatal syntax error occurred during the execution of a script. In the absence of
fatal errors, the exit status is that of the last command executed, or zero, if no command is executed.
Command Syntax
The shell begins parsing its input by breaking it into words. Words, which are sequences of characters,
are delimited by unquoted white-space characters (space, tab and newline) or meta-characters (<, >, |, ;,
&, ( and )). Aside from delimiting words, spaces and tabs are ignored, while newlines usually delimit
commands. The meta-characters are used in building the following tokens: <, <&, <<, >, >&, >>, etc. are
used to specify redirections (see Input/Output Redirection below); | is used to create pipelines; ; is
used to separate commands; & is used to create asynchronous pipelines; && and || are used to specify
conditional execution; ;; is used in case statements; and lastly, ( ... ) are used to create subshells.
White-space and meta-characters can be quoted individually using backslash (\), or in groups using double
(") or single (') quotes. Note that the following characters are also treated specially by the shell and
must be quoted if they are to represent themselves: \, ", ', #, $, `, ~, {, }, *, ? and [. The first
three of these are the above mentioned quoting characters (see Quoting below); #, if used at the
beginning of a word, introduces a comment — everything after the # up to the nearest newline is ignored;
$ is used to introduce parameter, command and arithmetic substitutions (see Substitution below); `
introduces an old-style command substitution (see Substitution below); ~ begins a directory expansion
(see Tilde Expansion below); { and } delimit csh(1) style alternations (see Brace Expansion below); and,
finally, *, ? and [ are used in file name generation (see File Name Patterns below).
As words and tokens are parsed, the shell builds commands, of which there are two basic types:
simple-commands, typically programs that are executed, and compound-commands, such as for and if
statements, grouping constructs and function definitions.
A simple-command consists of some combination of parameter assignments (see Parameters below),
input/output redirections (see Input/Output Redirections below), and command words; the only restriction
is that parameter assignments come before any command words. The command words, if any, define the
command that is to be executed and its arguments. The command may be a shell built-in command, a function
or an external command, i.e., a separate executable file that is located using the PATH parameter (see
Command Execution below). Note that all command constructs have an exit status: for external commands,
this is related to the status returned by wait(2) (if the command could not be found, the exit status is
127, if it could not be executed, the exit status is 126); the exit status of other command constructs
(built-in commands, functions, compound-commands, pipelines, lists, etc.) are all well defined and are
described where the construct is described. The exit status of a command consisting only of parameter
assignments is that of the last command substitution performed during the parameter assignment or zero if
there were no command substitutions.
Commands can be chained together using the | token to form pipelines, in which the standard output of
each command but the last is piped (see pipe(2)) to the standard input of the following command. The exit
status of a pipeline is that of its last command. A pipeline may be prefixed by the ! reserved word
which causes the exit status of the pipeline to be logically complemented: if the original status was 0
the complemented status will be 1, and if the original status was not 0, then the complemented status
will be 0.
Lists of commands can be created by separating pipelines by any of the following tokens: &&, ||, &, |&
and ;. The first two are for conditional execution: cmd1 && cmd2 executes cmd2 only if the exit status of
cmd1 is zero; || is the opposite — cmd2 is executed only if the exit status of cmd1 is non-zero. && and
|| have equal precedence which is higher than that of &, |& and ;, which also have equal precedence. The
& token causes the preceding command to be executed asynchronously, that is, the shell starts the
command, but does not wait for it to complete (the shell does keep track of the status of asynchronous
commands — see Job Control below). When an asynchronous command is started when job control is disabled
(i.e., in most scripts), the command is started with signals INT and QUIT ignored and with input
redirected from /dev/null (however, redirections specified in the asynchronous command have precedence).
Note that a command must follow the && and || operators, while a command need not follow &, |& and ;. The
exit status of a list is that of the last command executed, with the exception of asynchronous lists, for
which the exit status is 0.
Compound commands are created using the following reserved words — these words are only recognized if
they are unquoted and if they are used as the first word of a command (i.e., they can't be preceded by
parameter assignments or redirections):
case else
do esac if time [[
done fi in until {
elif for select while }
Note: Some shells (but not this one) execute control structure commands in a subshell when one or more of
their file descriptors are redirected, so any environment changes inside them may fail. To be portable,
the exec statement should be used instead to redirect file descriptors before the control structure.
In the following compound command descriptions, command lists (denoted as list) that are followed by
reserved words must end with a semi-colon, a newline or a (syntactically correct) reserved word. For
example,
{ echo foo; echo bar; }
{ echo foo; echo bar<newline>}
{ { echo foo; echo bar; } } are all valid, but
{ echo foo; echo bar } is not.
( list )
Execute list in a subshell. There is no implicit way to pass environment changes from a subshell back
to its parent.
{ list }
Compound construct; list is executed, but not in a subshell. Note that { and } are reserved words,
not meta-characters.
case word in [ [(] pattern [| pattern] ... ) list ;; ] ... esac
The case statement attempts to match word against the specified patterns; the list associated with
the first successfully matched pattern is executed. Patterns used in case statements are the same as
those used for file name patterns except that the restrictions regarding . and / are dropped. Note
that any unquoted space before and after a pattern is stripped; any space with a pattern must be
quoted. Both the word and the patterns are subject to parameter, command, and arithmetic substitution
as well as tilde substitution. For historical reasons, open and close braces may be used instead of
in and esac (e.g., case $foo { *) echo bar; }). The exit status of a case statement is that of the
executed list; if no list is executed, the exit status is zero.
for name [ in word ... term ] do list done
where term is either a newline or a ;. For each word in the specified word list, the parameter name
is set to the word and list is executed. If in is not used to specify a word list, the positional
parameters ("$1", "$2", etc.) are used instead. For historical reasons, open and close braces may be
used instead of do and done (e.g., for i; { echo $i; }). The exit status of a for statement is the
last exit status of list; if list is never executed, the exit status is zero.
if list then list [elif list then list] ... [else list] fi
If the exit status of the first list is zero, the second list is executed; otherwise the list
following the elif, if any, is executed with similar consequences. If all the lists following the if
and elifs fail (i.e., exit with non-zero status), the list following the else is executed. The exit
status of an if statement is that of non-conditional list that is executed; if no non-conditional
list is executed, the exit status is zero.
until list do list done
This works like while, except that the body is executed only while the exit status of the first list
is non-zero.
while list do list done
A while is a prechecked loop. Its body is executed as often as the exit status of the first list is
zero. The exit status of a while statement is the last exit status of the list in the body of the
loop; if the body is not executed, the exit status is zero.
name () command
Defines the function name. See Functions below. Note that redirections specified after a function
definition are performed whenever the function is executed, not when the function definition is
executed.
time [ -p ] [ pipeline ]
The time reserved word is described in the Command Execution section.
Quoting
Quoting is used to prevent the shell from treating characters or words specially. There are three methods
of quoting: First, \ quotes the following character, unless it is at the end of a line, in which case
both the \ and the newline are stripped. Second, a single quote (') quotes everything up to the next
single quote (this may span lines). Third, a double quote (") quotes all characters, except $, ` and \,
up to the next unquoted double quote. $ and ` inside double quotes have their usual meaning (i.e.,
parameter, command or arithmetic substitution) except no field splitting is carried out on the results of
double-quoted substitutions. If a \ inside a double-quoted string is followed by \, $, ` or ", it is
replaced by the second character; if it is followed by a newline, both the \ and the newline are
stripped; otherwise, both the \ and the character following are unchanged.
Note: see POSIX Mode below for a special rule regarding sequences of the form "...`...\"...`..".
Substitution
The first step the shell takes in executing a simple-command is to perform substitutions on the words of
the command. There are three kinds of substitution: parameter, command and arithmetic. Parameter
substitutions, which are described in detail in the next section, take the form $name or ${...}; command
substitutions take the form $(command) or `command`; and arithmetic substitutions take the form
$((expression)).
If a substitution appears outside of double quotes, the results of the substitution are generally subject
to word or field splitting according to the current value of the IFS parameter. The IFS parameter
specifies a list of characters which are used to break a string up into several words; any characters
from the set space, tab and newline that appear in the IFS characters are called IFS white space.
Sequences of one or more IFS white space characters, in combination with zero or one non-IFS white space
characters delimit a field. As a special case, leading and trailing IFS white space is stripped (i.e., no
leading or trailing empty field is created by it); leading or trailing non-IFS white space does create an
empty field. Example: if IFS is set to `<space>:', the sequence of characters
`<space>A<space>:<space><space>B::D' contains four fields: `A', `B', `' and `D'. Note that if the IFS
parameter is set to the null string, no field splitting is done; if the parameter is unset, the default
value of space, tab and newline is used.
The results of substitution are, unless otherwise specified, also subject to brace expansion and file
name expansion (see the relevant sections below).
A command substitution is replaced by the output generated by the specified command, which is run in a
subshell. For $(command) substitutions, normal quoting rules are used when command is parsed, however,
for the `command` form, a \ followed by any of $, ` or \ is stripped (a \ followed by any other character
is unchanged). As a special case in command substitutions, a command of the form < file is interpreted to
mean substitute the contents of file ($(< foo) has the same effect as $(cat foo), but it is carried out
more efficiently because no process is started).
NOTE: $(command) expressions are currently parsed by finding the matching parenthesis, regardless of
quoting. This will hopefully be fixed soon.
Arithmetic substitutions are replaced by the value of the specified expression. For example, the command
echo $((2+3*4)) prints 14. See Arithmetic Expressions for a description of an expression.
Parameters
Parameters are shell variables; they can be assigned values and their values can be accessed using a
parameter substitution. A parameter name is either one of the special single punctuation or digit
character parameters described below, or a letter followed by zero or more letters or digits (`_' counts
as a letter). The later form can be treated as arrays by appending an array index of the form: [expr]
where expr is an arithmetic expression. Array indices are currently limited to the range 0 through 1023,
inclusive. Parameter substitutions take the form $name, ${name} or ${name[expr]}, where name is a
parameter name. If substitution is performed on a parameter (or an array parameter element) that is not
set, a null string is substituted unless the nounset option (set -o nounset or set -u) is set, in which
case an error occurs.
Parameters can be assigned values in a number of ways. First, the shell implicitly sets some parameters
like #, PWD, etc.; this is the only way the special single character parameters are set. Second,
parameters are imported from the shell's environment at startup. Third, parameters can be assigned values
on the command line, for example, `FOO=bar' sets the parameter FOO to bar; multiple parameter assignments
can be given on a single command line and they can be followed by a simple-command, in which case the
assignments are in effect only for the duration of the command (such assignments are also exported, see
below for implications of this). Note that both the parameter name and the = must be unquoted for the
shell to recognize a parameter assignment. The fourth way of setting a parameter is with the export and
readonly commands; see their descriptions in the Command Execution section. Fifth, for and select loops
set parameters as well as the getopts, read and set -A commands. Lastly, parameters can be assigned
values using assignment operators inside arithmetic expressions (see Arithmetic Expressions below) or
using the ${name=value} form of parameter substitution (see below).
Parameters with the export attribute (set using the export command, or by parameter assignments followed
by simple commands) are put in the environment (see environ(5)) of commands run by the shell as
name=value pairs. The order in which parameters appear in the environment of a command is unspecified.
When the shell starts up, it extracts parameters and their values from its environment and automatically
sets the export attribute for those parameters.
Modifiers can be applied to the ${name} form of parameter substitution:
${name:-word}
if name is set and not null, it is substituted, otherwise word is substituted.
${name:+word}
if name is set and not null, word is substituted, otherwise nothing is substituted.
${name:=word}
if name is set and not null, it is substituted, otherwise it is assigned word and the resulting value
of name is substituted.
${name:?word}
if name is set and not null, it is substituted, otherwise word is printed on standard error (preceded
by name:) and an error occurs (normally causing termination of a shell script, function or .-script).
If word is omitted the string `parameter null or not set' is used instead.
In the above modifiers, the : can be omitted, in which case the conditions only depend on name being set
(as opposed to set and not null). If word is needed, parameter, command, arithmetic and tilde
substitution are performed on it; if word is not needed, it is not evaluated.
The following forms of parameter substitution can also be used:
${#name}
The number of positional parameters if name is *, @ or is not specified, or the length of the string
value of parameter name.
${#name[*]}, ${#name[@]}
The number of elements in the array name.
${name#pattern}, ${name##pattern}
If pattern matches the beginning of the value of parameter name, the matched text is deleted from the
result of substitution. A single # results in the shortest match, two #'s results in the longest
match.
${name%pattern}, ${name%%pattern}
Like ${..#..} substitution, but it deletes from the end of the value.
The following special parameters are implicitly set by the shell and cannot be set directly using
assignments:
!
Process id of the last background process started. If no background processes have been started, the
parameter is not set.
#
The number of positional parameters (i.e., $1, $2, etc.).
$
The process ID of the shell, or the PID of the original shell if it is a subshell.
-
The concatenation of the current single letter options (see set command below for list of options).
?
The exit status of the last non-asynchronous command executed. If the last command was killed by a
signal, $? is set to 128 plus the signal number.
0
The name the shell was invoked with (that is, argv[0]), or the command-name if it was invoked with
the -c option and the command-name was supplied, or the file argument, if it was supplied. If the
posix option is not set, $0 is the name of the current function or script.
1 ... 9
The first nine positional parameters that were supplied to the shell, function or .-script. Further
positional parameters may be accessed using ${number}.
*
All positional parameters (except parameter 0), i.e., $1 $2 $3.... If used outside of double quotes,
parameters are separate words (which are subjected to word splitting); if used within double quotes,
parameters are separated by the first character of the IFS parameter (or the empty string if IFS is
null).
@
Same as $*, unless it is used inside double quotes, in which case a separate word is generated for
each positional parameter - if there are no positional parameters, no word is generated ("$@" can be
used to access arguments, verbatim, without loosing null arguments or splitting arguments with
spaces).
The following parameters are set and/or used by the shell:
"CDPATH"
Search path for the cd built-in command. Works the same way as PATH for those directories not
beginning with / in cd commands. Note that if CDPATH is set and does not contain . nor an empty
path, the current directory is not searched.
COLUMNS
Set to the number of columns on the terminal or window. Currently set to the cols value as reported
by stty(1) if that value is non-zero. This parameter is used by the interactive line editing modes,
and by select, set -o and kill -l commands to format information in columns.
ERRNO
Integer value of the shell's errno variable — indicates the reason the last system call failed.
Not implemented yet.
EXECSHELL
If set, this parameter is assumed to contain the shell that is to be used to execute commands that
execve(2) fails to execute and which do not start with a `#! shell' sequence.
FCEDIT
The editor used by the fc command (see below).
FPATH
Like PATH, but used when an undefined function is executed to locate the file defining the function.
It is also searched when a command can't be found using PATH. See Functions below for more
information.
HOME
The default directory for the cd command and the value substituted for an unqualified ~ (see Tilde
Expansion below).
IFS
Internal field separator, used during substitution and by the read command, to split values into
distinct arguments; normally set to space, tab and newline. See Substitution above for details.
Note: this parameter is not imported from the environment when the shell is started.
POSH_VERSION
The version of posh (readonly).
LINENO
The line number of the function or shell script that is currently being executed.
LINES
Set to the number of lines on the terminal or window.
Not implemented yet.
OLDPWD
The previous working directory. Unset if cd has not successfully changed directories since the shell
started, or if the shell doesn't know where it is.
OPTARG
When using getopts, it contains the argument for a parsed option, if it requires one.
OPTIND
The index of the last argument processed when using getopts. Assigning 1 to this parameter causes
getopts to process arguments from the beginning the next time it is invoked.
PATH
A colon separated list of directories that are searched when looking for commands and .'d files. An
empty string resulting from a leading or trailing colon, or two adjacent colons is treated as a `.',
the current directory.
PPID
The process ID of the shell's parent (readonly).
PS1
The primary prompt for interactive shells. The prompt is printed verbatim (i.e., no substitutions are
done). Default is ‘$ ’ for non-root users, `# ' for root..
PS2
Secondary prompt string, by default `> ', used when more input is needed to complete a command.
PS4
Used to prefix commands that are printed during execution tracing (see set -x command below). The
prompt is printed verbatim (i.e., no substitutions are done). Default is `+ '.
PWD
The current working directory. Maybe unset or null if shell doesn't know where it is.
REPLY
Default parameter for the read command if no names are given. Also used in select loops to store the
value that is read from standard input.
TMPDIR
The directory shell temporary files are created in. If this parameter is not set, or does not contain
the absolute path of a writable directory, temporary files are created in /tmp.
Tilde Expansion
Tilde expansion, which is done in parallel with parameter substitution, is done on words starting with an
unquoted ~. The characters following the tilde, up to the first /, if any, are assumed to be a login
name. If the login name is empty, + or -, the value of the HOME, PWD, or OLDPWD parameter is substituted,
respectively. Otherwise, the password file is searched for the login name, and the tilde expression is
substituted with the user's home directory. If the login name is not found in the password file or if any
quoting or parameter substitution occurs in the login name, no substitution is performed.
In parameter assignments (those preceding a simple-command or those occurring in the arguments of alias,
export, and readonly, tilde expansion is done after any unquoted colon (:), and login names are also
delimited by colons.
The home directory of previously expanded login names are cached and re-used. The alias -d command may be
used to list, change and add to this cache (e.g., `alias -d fac=/usr/local/facilities; cd ~fac/bin').
File Name Patterns
A file name pattern is a word containing one or more unquoted ? or * characters or [..] sequences. Once
brace expansion has been performed, the shell replaces file name patterns with the sorted names of all
the files that match the pattern (if no files match, the word is left unchanged). The pattern elements
have the following meaning:
"?"
matches any single character.
*
matches any sequence of characters.
[..]
matches any of the characters inside the brackets. Ranges of characters can be specified by
separating two characters by a -, e.g., [a0-9] matches the letter a or any digit. In order to
represent itself, a - must either be quoted or the first or last character in the character list.
Similarly, a ] must be quoted or the first character in the list if it is represent itself instead of
the end of the list. Also, a ! appearing at the start of the list has special meaning (see below),
so to represent itself it must be quoted or appear later in the list.
[!..]
like [..], except it matches any character not inside the brackets.
Note that posh currently never matches . and .., but the original ksh, Bourne sh and bash do, so this
may have to change (too bad).
Note that none of the above pattern elements match either a period (.) at the start of a file name or a
slash (/), even if they are explicitly used in a [..] sequence; also, the names . and .. are never
matched, even by the pattern .*.
The POSIX character classes (i.e., [:class-name:] inside a [..] expression) are not yet implemented.
Input/Output Redirection
When a command is executed, its standard input, standard output and standard error (file descriptors 0, 1
and 2, respectively) are normally inherited from the shell. Three exceptions to this are commands in
pipelines, for which standard input and/or standard output are those set up by the pipeline, asynchronous
commands created when job control is disabled, for which standard input is initially set to be from
/dev/null, and commands for which any of the following redirections have been specified:
"> file"
standard output is redirected to file. If file does not exist, it is created; if it does exist, is a
regular file and the noclobber option is set, an error occurs, otherwise the file is truncated. Note
that this means the command cmd < foo > foo will open foo for reading and then truncate it when it
opens it for writing, before cmd gets a chance to actually read foo.
">| file"
same as >, except the file is truncated, even if the noclobber option is set.
">> file"
same as >, except the file an existing file is appended to instead of being truncated. Also, the file
is opened in append mode, so writes always go to the end of the file (see open(2)).
"< file"
standard input is redirected from file, which is opened for reading.
"<> file"
same as <, except the file is opened for reading and writing.
"<< marker"
after reading the command line containing this kind of redirection (called a here document), the
shell copies lines from the command source into a temporary file until a line matching marker is
read. When the command is executed, standard input is redirected from the temporary file. If marker
contains no quoted characters, the contents of the temporary file are processed as if enclosed in
double quotes each time the command is executed, so parameter, command and arithmetic substitutions
are performed, along with backslash (\) escapes for $, `, \ and \newline. If multiple here documents
are used on the same command line, they are saved in order.
"<<- marker"
same as <<, except leading tabs are stripped from lines in the here document.
"<& fd"
standard input is duplicated from file descriptor fd. fd can be a single digit, indicating the
number of an existing file descriptor, the letter p, indicating the file descriptor associated with
the output of the current co-process, or the character -, indicating standard input is to be closed.
">& fd"
same as <&, except the operation is done on standard output.
In any of the above redirections, the file descriptor that is redirected (i.e., standard input or
standard output) can be explicitly given by preceding the redirection with a single digit. Parameter,
command and arithmetic substitutions, tilde substitutions and (if the shell is interactive) file name
generation are all performed on the file, marker and fd arguments of redirections. Note however, that the
results of any file name generation are only used if a single file is matched; if multiple files match,
the word with the unexpanded file name generation characters is used.
For simple-commands, redirections may appear anywhere in the command, for compound-commands (if
statements, etc.), any redirections must appear at the end. Redirections are processed after pipelines
are created and in the order they are given, so
cat /foo/bar 2>&1 > /dev/null | cat -n will print an error with a line number prepended to it.
Arithmetic Expressions
Integer arithmetic expressions can be used inside $((..)) expressions, inside array references (e.g.,
name[expr]), as numeric arguments to the test command, and as the value of an assignment to an integer
parameter.
Expression may contain alpha-numeric parameter identifiers, array references, and integer constants and
may be combined with the following C operators (listed and grouped in increasing order of precedence).
Unary operators:
+ - ! ~ ++ --
Binary operators:
,
= *= /= %= += -= <<= >>= &= ^= |=
||
&&
|
^
&
== !=
< <= >= >
<< >>
+ -
* / %
Ternary operator:
?: (precedence is immediately higher than assignment)
Grouping operators:
( )
Integer constants may be specified with arbitrary bases using the notation base#number, where base is a
decimal integer specifying the base, and number is a number in the specified base.
The operators are evaluated as follows:
"unary +"
result is the argument (included for completeness).
"unary -"
negation.
"!"
logical not; the result is 1 if argument is zero, 0 if not.
"~"
arithmetic (bit-wise) not.
"++"
increment; must be applied to a parameter (not a literal or other expression) - the parameter is
incremented by 1. When used as a prefix operator, the result is the incremented value of the
parameter, when used as a postfix operator, the result is the original value of the parameter.
"++"
similar to ++, except the parameter is decremented by 1.
","
separates two arithmetic expressions; the left hand side is evaluated first, then the right. The
result is value of the expression on the right hand side.
"="
assignment; variable on the left is set to the value on the right.
"*= /= %= += -= <<= >>= &= ^= |="
assignment operators; <var> <op>= <expr> is the same as <var> = <var> <op> ( <expr> ).
"||"
logical or; the result is 1 if either argument is non-zero, 0 if not. The right argument is evaluated
only if the left argument is zero.
"&&"
logical and; the result is 1 if both arguments are non-zero, 0 if not. The right argument is
evaluated only if the left argument is non-zero.
"|"
arithmetic (bit-wise) or.
"^"
arithmetic (bit-wise) exclusive-or.
"&"
arithmetic (bit-wise) and.
"=="
equal; the result is 1 if both arguments are equal, 0 if not.
"!="
not equal; the result is 0 if both arguments are equal, 1 if not.
"<"
less than; the result is 1 if the left argument is less than the right, 0 if not.
"<= >= >"
less than or equal, greater than or equal, greater than. See <.
"<< >>"
shift left (right); the result is the left argument with its bits shifted left (right) by the amount
given in the right argument.
"+ - * /"
addition, subtraction, multiplication, and division.
"%"
remainder; the result is the remainder of the division of the left argument by the right. The sign of
the result is unspecified if either argument is negative.
"<arg1> ? <arg2> : <arg3>"
if <arg1> is non-zero, the result is <arg2>, otherwise <arg3>.
Functions
Functions are defined using the Bourne/POSIX shell name() syntax. Functions are like .-scripts in that
they are executed in the current environment, however, unlike .-scripts, shell arguments (i.e.,
positional parameters, $1, etc.) are never visible inside them. When the shell is determining the
location of a command, functions are searched after special built-in commands, and before regular and
non-regular built-ins, and before the PATH is searched.
An existing function may be deleted using unset -f function-name.
Since functions are executed in the current shell environment, parameter assignments made inside
functions are visible after the function completes.
The exit status of a function is that of the last command executed in the function. A function can be
made to finish immediately using the return command; this may also be used to explicitly specify the exit
status.
Command Execution
After evaluation of command line arguments, redirections and parameter assignments, the type of command
is determined: a special built-in, a function, a regular built-in or the name of a file to execute found
using the PATH parameter. The checks are made in the above order. Special built-in commands differ from
other commands in that the PATH parameter is not used to find them, an error during their execution can
cause a non-interactive shell to exit and parameter assignments that are specified before the command are
kept after the command completes. Just to confuse things, if the posix option is turned off (see set
command below) some special commands are very special in that no field splitting, file globbing, brace
expansion nor tilde expansion is performed on arguments that look like assignments. Regular built-in
commands are different only in that the PATH parameter is not used to find them.
Job Control
Job control refers to the shell's ability to monitor and control jobs, which are processes or groups of
processes created for commands or pipelines. At a minimum, the shell keeps track of the status of the
background (i.e., asynchronous) jobs that currently exist; this information can be displayed using the
jobs command. If job control is fully enabled (using set -m or set -o monitor), as it is for interactive
shells, the processes of a job are placed in their own process group, foreground jobs can be stopped by
typing the suspend character from the terminal (normally ^Z), jobs can be restarted in either the
foreground or background, using the fg and bg commands, respectively, and the state of the terminal is
saved or restored when a foreground job is stopped or restarted, respectively.
Note that only commands that create processes (e.g., asynchronous commands, subshell commands, and
non-built-in, non-function commands) can be stopped; commands like read cannot be.
When a job is created, it is assigned a job-number. For interactive shells, this number is printed inside
[..], followed by the process-ids of the processes in the job when an asynchronous command is run. A job
may be referred to in bg, fg, jobs, kill and wait commands either by the process id of the last process
in the command pipeline (as stored in the $! parameter) or by prefixing the job-number with a percent
sign (%). Other percent sequences can also be used to refer to jobs:
%+ %+ The most recently stopped job, or, if there
are no stopped jobs, the oldest
running job.
%%, % %%, % Same as %+.
%- %- The job that would be
the %+ job, if the
later did not exist.
%n %n The job with
job-number n.
%?string %?string The job containing the
string string (an
error occurs if
multiple jobs
are
matched).
%string %string The job starting with
string string (an error
occurs if multiple jobs
are
matched).
When a job changes state (e.g., a background job finishes or foreground job is stopped), the shell prints
the following status information: [number] flag status command where
" number"
is the job-number of the job.
" flag"
is + or - if the job is the %+ or %- job, respectively, or space if it is neither.
" status"
indicates the current state of the job and can be
"Running"
the job has neither stopped or exited (note that running does not necessarily mean consuming CPU time
— the process could be blocked waiting for some event).
"Done [(number)]"
the job exited. number is the exit status of the job, which is omitted if the status is zero.
"Stopped [(signal)]"
the job was stopped by the indicated signal (if no signal is given, the job was stopped by SIGTSTP).
"signal-description [(core dumped)]"
the job was killed by a signal (e.g., Memory fault, Hangup, etc. — use kill -l for a list of signal
descriptions). The (core dumped) message indicates the process created a core file.
" command"
is the command that created the process. If there are multiple processes in the job, then each
process will have a line showing its command and possibly its status, if it is different from the
status of the previous process.
When an attempt is made to exit the shell while there are jobs in the stopped state, the shell warns the
user that there are stopped jobs and does not exit. If another attempt is immediately made to exit the
shell, the stopped jobs are sent a HUP signal and the shell exits. Similarly, if the nohup option is not
set and there are running jobs when an attempt is made to exit a login shell, the shell warns the user
and does not exit. If another attempt is immediately made to exit the shell, the running jobs are sent a
HUP signal and the shell exits.
BUILTIN UTILITIES
posh implements the following builtin utilities:
• .
• :
• [
• break
• builtin
• continue
• eval
• exec
• exit
• false
• return
• set
• shift
• times
• trap
• wait
• read
• test
• true
• umask
• unset
• cd
• command
• echo
• export
• getopts
• kill
• local
• pwd
• readonly
FILES
~/.profile /etc/profile /etc/suid_profile
BUGS
Any bugs in posh should be reported via the Debian BTS. Legitimate bugs are inconsistencies between
manpage and behavior, and inconsistencies between behavior and Debian policy (currently SUSv3 compliance
with the following exceptions: echo -n, binary -a and -o to test, local scoping).
VERSION
This page documents the Policy-compliant Ordinary SHell.
AUTHORS
This shell is based on pdksh.
SEE ALSO
awk(1), ksh(1), dash(1), ed(1), getconf(1), getopt(1), sed(1), stty(1), vi(1), dup(2), execve(2),
getgid(2), getuid(2), open(2), pipe(2), wait(2), getopt(3), rand(3), signal(3), system(3), environ(5)
User commands 01/24/2011 POSH(1)